More Accurate Measurement of Return Peak Current in Cyclic Voltammetry Using Diffusional Baseline Fitting.

The difficulty associated with accurately measuring the height of the back peak (Ipb) in cyclic voltammetry (CV) has long plagued electrochemists. Most commonly, Ipb is measured by extrapolating a linear fit from a selected region of a voltammogram after the switching potential (Eλ), but without substantial separation between the peak potential (Ep) and Eλ, this approach always overestimates the background current and so underestimates Ipb. Moreover, experimental conditions can present challenges for this method as an appropriate region for linear fitting is often lacking due to neighboring peaks or solvent electrolysis current. Here, we present a new method for finding the baseline current for the back peak in CV experiments. By examining the CV data as a function of time rather than potential, it is possible to fit a generalized Cottrell or Shoup-Szabo equation to the current decay of the forward peak and extrapolate this function as a baseline for the return peak. This approach was tested by using simulated and experimental data in a variety of conditions, including data demonstrating linear and radial diffusional control. We found that the method allows for more accurate determination of back peak currents, especially when linear fits are complicated by narrow electrochemical windows or radial diffusion. A user-friendly Python program was written to automatically find an appropriate fitting range for this analysis and measure peak currents. We have made this program available to the electrochemical community at large.

Elucidating the Mechanism of Efficient Eu(III) and Yb(III) Sensitisation from a Re(I) Tetrazolato Triangular Assembly.

The reaction of Re(CO)5Br with deprotonated 1H-(5-(2,2':6',2''-terpyridine)pyrid-2-yl)tetrazole yields a triangular assembly formed by tricarbonyl Re(I) vertices. Photophysical measurements reveal blue-green emission with a maximum at 520 nm, 32% quantum yield, and 2430 ns long-lived excited state decay lifetime in deaerated dichloromethane solution. Coordination of lanthanoid ions to the terpyridine units red-shifts the emission to 570 nm and also reveals efficient (90%) and fast sensitisation to both Eu(III) and Yb(III) at room temperature, with a similar rate constant kET of the order of 107 s-1. Efficient sensitisation of Eu(III) from Re(I) is unprecedented, especially when considering the close proximity in energy between the donor and acceptor excited states. On the other hand, comparative measurements at 77 K reveal that energy transfer to Yb(III) is two orders of magnitude slower than that to Eu(III). A two-step mechanism of sensitisation is therefore proposed, whereby the rate-determining step is a thermally activated energy transfer step between the Re(I) centre and the terpyridine functionality, followed by rapid energy transfer to the respective Ln(III) excited states. At 77 K, the direct Re(I) to Eu(III) energy transfer seems to proceed via a ligand-mediated superexchange Dexter-type mechanism.

Giant and Tunable Out-of-Plane Spin Polarization of Topological Antimonene.

Topological insulators are bulk insulators with metallic and fully spin-polarized surface states displaying Dirac-like band dispersion. Due to spin-momentum locking, these topological surface states (TSSs) have a predominant in-plane spin polarization in the bulk fundamental gap. Here, we show by spin-resolved photoemission spectroscopy that the TSS of a topological insulator interfaced with an antimonene bilayer exhibits nearly full out-of-plane spin polarization within the substrate gap. We connect this phenomenon to a symmetry-protected band crossing of the spin-polarized surface states. The nearly full out-of-plane spin polarization of the TSS occurs along a continuous path in the energy-momentum space, and the spin polarization within the gap can be reversibly tuned from nearly full out-of-plane to nearly full in-plane by electron doping. These findings pave the way to advanced spintronics applications that exploit the giant out-of-plane spin polarization of TSSs.

N-Heterocyclic Olefins on a Silicon Surface.

The adsorption of N-heterocyclic olefins (NHOs) on silicon is investigated in a combined scanning tunneling microscopy, X-ray photoelectron spectroscopy, and density functional theory study. We find that both of the studied NHOs bind covalently, with ylidic character, to the silicon adatoms of the substrate and exhibit good thermal stability. The adsorption geometry strongly depends on the N-substituents: for large N-substituents, an upright adsorption geometry is favored, while a flat-lying geometry is found for the NHO with smaller wingtips. These different geometries strongly influence the quality and properties of the obtained monolayers. The upright geometry leads to the formation of ordered monolayers, whereas the flat-lying NHOs yield a mostly disordered, but denser, monolayer. The obtained monolayers both show large work function reductions, as the higher density of the flat-lying monolayer is found to compensate for the smaller vertical dipole moments. Our findings offer new prospects in the design of tailor-made ligand structures in organic electronics and optoelectronics, catalysis, and material science.

Wide-Bite-Angle Diphosphine Ligands in Thermally Activated Delayed Fluorescent Copper(I) Complexes: Impact on the Performance of Electroluminescence Applications.

We report a series of seven cationic heteroleptic copper(I) complexes of the form [Cu(P^P)(dmphen)]BF4, where dmphen is 2,9-dimethyl-1,10-phenanthroline and P^P is a diphosphine chelate, in which the effect of the bite angle of the diphosphine ligand on the photophysical properties of the complexes was studied. Several of the complexes exhibit moderately high photoluminescence quantum yields in the solid state, with ΦPL of up to 35%, and in solution, with ΦPL of up to 98%. We were able to correlate the powder photoluminescence quantum yields with the % Vbur of the P^P ligand. The most emissive complexes were used to fabricate both organic light-emitting diodes and light-emitting electrochemical cells (LECs), both of which showed moderate performance. Compared to the benchmark copper(I)-based LECs, [Cu(dnbp)(DPEPhos)]+ (maximum external quantum efficiency, EQEmax = 16%), complex 3 (EQEmax = 1.85%) showed a much longer device lifetime (t1/2 = 1.25 h and >16.5 h for [Cu(dnbp)(DPEPhos)]+ and complex 3, respectively). The electrochemiluminescence (ECL) properties of several complexes were also studied, which, to the best of our knowledge, constitutes the first ECL study for heteroleptic copper(I) complexes. Notably, complexes exhibiting more reversible electrochemistry were associated with higher annihilation ECL as well as better performance in a LEC.

Metathesis Reactions between Heavy d-8 Fluorides and I(III)-Pyridine Complexes.

The reaction between trans-[AuF2(pyridine)2]+ and [PhI(pyridine)2]2+ results in the formation of PhIF2 and [Au(pyridine)4]3+. Investigation of the reaction pathway using model Pd and Pt analogues of the gold complex indicate that the most likely mechanism is attack by the Au-F onto the I(III), rather than a redox process. This demonstrates that the Au(III)-F fragment can behave in a nucleophilic manner even in a relatively electron-poor cationic complex.

Mixed annihilation electrogenerated chemiluminescence of iridium(iii) complexes.

Previously reported annihilation ECL of mixtures of metal complexes have generally comprised Ir(ppy)3 or a close analogue as a higher energy donor/emitter (green/blue light) and [Ru(bpy)3]2+ or its derivative as a lower energy acceptor/emitter (red light). In contrast, here we examine Ir(ppy)3 as the lower energy acceptor/emitter, by combining it with a second Ir(iii) complex: [Ir(df-ppy)2(ptb)]+ (where ptb = 1-benzyl-1,2,3-triazol-4-ylpyridine). The application of potentials sufficient to attain the first single-electron oxidation and reduction products can be exploited to detect Ir(ppy)3 at orders of magnitude lower concentration, or enhance its maximum emission intensity at high concentration far beyond that achievable through conventional annihilation ECL of Ir(ppy)3 involving comproportionation. Moreover, under certain conditions, the colour of the emission can be selected through the applied electrochemical potentials. We have also prepared a novel Ir(iii) complex with a sufficiently low reduction potential that the reaction between its reduced form and Ir(ppy)3+ cannot populate the excited state of either luminophore. This enabled, for the first time, the exclusive formation of either excited state through the application of higher cathodic or anodic potentials, but in both cases, the ECL was greatly diminished by parasitic dark reactions.

The Chemistry of Some Dalodesmidean Millipedes from Tasmania (Diplopoda, Polydesmida).

Millipedes (Diplopoda) are well known for their toxic or repellent defensive secretions. As part of a larger investigation, we describe the chemical constituents of 14 species of Tasmanian millipedes in seven genera. Six species in the genus Gasterogramma were found to produce acyclic ketones, including the pungent unsaturated ketones 1, 2, and 6, and the novel (rel-3R,5S,7S)-3,5,7-trimethyl-2,8-decanedione (7b), for which the stereoconfiguration was established by stereoselective syntheses of pairs of isomers. These compounds have not been detected before in millipede defensive secretions. This report is the first on species of the suborder Dalodesmidea (Polydesmida), a dominant component of the soil and litter fauna of the temperate regions of the Southern Hemisphere.

Aggregation-Induced Electrochemiluminescence of Platinum(II) Complexes.

We report the electrochemiluminescence properties of square-planar Pt(II) complexes that result from the formation of supramolecular nanostructures. We define this new phenomenon as aggregation-induced electrochemiluminescence (AIECL). In this system, self-assembly changes the HOMO and LUMO energies, making their population accessible via ECL pathways and leading to the generation of the luminescent excited state. Significantly, the emission from the self-assembled system is the first example of electrochemiluminescence (ECL) of Pt(II) complexes in aqueous solution having higher efficiency than the standard, Ru(bpy)32+.The finding can lead to a new generation of bright emitters that can be used as ECL labels.

Publisher's Note: Si Nanoribbons on Ag(110) Studied by Grazing-Incidence X-Ray Diffraction, Scanning Tunneling Microscopy, and Density-Functional Theory: Evidence of a Pentamer Chain Structure [Phys. Rev. Lett. 117, 276102 (2016)].

This corrects the article DOI: 10.1103/PhysRevLett.117.276102.

9-Vinylanthracene Based Fluorogens: Synthesis, Structure-Property Relationships and Applications.

Fluorescent dyes with aggregation-induced emission (AIE) properties exhibit intensified emission upon aggregation. They are promising candidates to study biomolecules and cellular changes in aqueous environments when aggregation formation occurs. Here, we report a group of 9-position functionalized anthracene derivatives that were conveniently synthesized by the palladium-catalyzed Heck reaction. Using fluorometric analyses, these dyes were confirmed to show AIE behavior upon forming aggregates at high concentrations, in viscous solvents, and when poorly solubilized. Their photophysical properties were then further correlated with their structural features, using density functional theory (DFT) calculation. Finally, we demonstrated their potential applications in monitoring pH changes, quantifying globular proteins, as well as cell imaging with confocal microscopy.

A Strong cis-Effect in an Imidazole-Imidazolium-Substituted Alkene.

We report the first example of an alkene with two carbon-bound substituents (imidazole and imidazolium rings) where the Z-isomer has a greater thermodynamic stability than the E-isomer which persists in both the gas phase and in solution. Theoretical calculations, solution fluorescence spectroscopy and gas-phase ion mobility mass spectrometry studies confirm the preference for the Z-isomer, the stability of which is traced to a non-covalent interaction between the imidazole lone pair and the imidazolium ring.

Si Nanoribbons on Ag(110) Studied by Grazing-Incidence X-Ray Diffraction, Scanning Tunneling Microscopy, and Density-Functional Theory: Evidence of a Pentamer Chain Structure.

We report a combined grazing incidence x-ray diffraction (GIXD), scanning tunneling microscopy (STM), and density-functional theory (DFT) study which clearly elucidates the atomic structure of the Si nanoribbons grown on the missing-row reconstructed Ag(110) surface. Our study allows us to discriminate between the theoretical models published in the literature, including the most stable atomic configurations and those based on a missing-row reconstructed Ag(110) surface. GIXD measurements unambiguously validate the pentamer model grown on the reconstructed surface, obtained from DFT. This pentamer atomistic model accurately matches the high-resolution STM images of the Si nanoribbons adsorbed on Ag(110). Our study closes the long-debated atomic structure of the Si nanoribbons grown on Ag(110) and definitively excludes a honeycomb structure similar to that of freestanding silicene.

Considering the chemical energy requirements of the tri-n-propylamine co-reactant pathways for the judicious design of new electrogenerated chemiluminescence detection systems.

The introduction of a 'co-reactant' was a critical step in the evolution of electrogenerated chemiluminescence (ECL) from a laboratory curiosity to a widely utilised detection system. In conjunction with a suitable electrochemiluminophore, the co-reactant enables generation of both the oxidised and reduced precursors to the emitting species at a single electrode potential, under the aqueous conditions required for most analytical applications. The most commonly used co-reactant is tri-n-propylamine (TPrA), which was developed for the classic tris(2,2'-bipyridine)ruthenium(II) ECL reagent. New electrochemiluminophores such as cyclometalated iridium(III) complexes are also evaluated with this co-reactant. However, attaining the excited states in these systems can require much greater energy than that of tris(2,2'-bipyridine)ruthenium(II), which has implications for the co-reactant reaction pathways. In this tutorial review, we describe a simple graphical approach to characterise the energetically feasible ECL pathways with TPrA, as a useful tool for the development of new ECL detection systems.

Access to the Parent Tetrakis(pyridine)gold(III) Trication, Facile Formation of Rare Au(III) Terminal Hydroxides, and Preliminary Studies of Biological Properties.

In this paper we report on the use of [NO][BF4] to access tricationic tetrakis(pyridine)gold(III) from Au powder, a species inaccessible using the more traditional (tetrahydrothiophene)AuCl route. It is then demonstrated that this family of compounds can be used to access new terminal Au(III) hydroxides, a challenging class of compounds, and the first crystallographically characterized examples employing bidentate ligands. Finally, preliminary biological studies indicate good activity for derivatives featuring polydentate ligands against the HeLa and PC3 cell lines but also strong inhibition of primary HUVEC cells.

Labeling phospholipid membranes with lipid mimetic luminescent metal complexes.

Lipid-mimetic metallosurfactant based luminophores are promising candidates for labeling phospholipid membranes without altering their biophysical characteristics. The metallosurfactants studied exhibit high structural and physicochemical similarity to phospholipid molecules, designed to incorporate into the membrane structure without the need for covalent attachment to a lipid molecule. In this work, two lipid-mimetic phosphorescent metal complexes are described: [Ru(bpy)2(dn-bpy)](2+) and [Ir(ppy)2(dn-bpy)](+) where bpy is 2,2'-bipyridine, dn-bpy is 4,4'-dinonyl-2,2'-bipyridine and ppy is 2-phenylpyridine. Apart from being lipid-mimetic in size, shape and physical properties, both complexes exhibit intense photoluminescence and enhanced photostability compared with conventional organic fluorophores, allowing for prolonged observation. Moreover, the large Stokes shift and long luminescence lifetime associated with these complexes make them more suitable for spectroscopic studies. The complexes are easily incorporated into dimyristoil-phosphatidyl-choline (DMPC) liposomes by mixing in the organic solvent phase. DLS reveals the labeled membranes form liposomes of similar size to that of neat DMPC membrane. Synchrotron Small-Angle X-ray Scattering (SAXS) measurements confirmed that up to 5% of either complex could be incorporated into DMPC membranes without producing any structural changes in the membrane. Fluorescence microscopy reveals that 0.5% label content is sufficient for imaging. Atomic Force Microscopic imaging confirms that liposomes of the labeled bilayers on a mica surface can fuse into a flat lamellar membrane that is morphologically identical to neat lipid membranes. These results demonstrate the potential of such lipid-mimetic luminescent metal complexes as a new class of labels for imaging lipid membranes.

The fate of NHC-stabilized dicarbon.

The attempted synthesis of NHC-stabilized dicarbon (NHC=C=C=NHC) through deprotonation of a doubly protonated precursor ([NHC-CH=CH-NHC](2+) ) is reported. Rather than deprotonation, a clean reduction to NHC=CH-CH=NHC is observed with a variety of bases. The apparent resistance towards deprotonation to the target compound led to a reinvestigation of the electronic structure of NHC→CC←NHC, which showed that the highest occupied molecular orbital/lowest unoccupied molecular orbital (HOMO/LUMO) gap is likely too small to allow for isolation of this species. This is in contrast to the recent isolation of the cyclic alkylaminocarbene analogue (cAAC=C=C=cAAC), which has a large HOMO-LUMO gap. A detailed theoretical study illuminates the differences in electronic structures between these molecules, highlighting another case of the potential advantages of using cAAC rather than NHC as a ligand. The bonding analysis suggests that the dicarbon compounds are well represented in terms of donor-acceptor interactions L→C2 ←L (L=NHC, cAAC).

Electrogenerated chemiluminescence of tris(2,2' bipyridine)ruthenium(II) using common biological buffers as co-reactant, pH buffer and supporting electrolyte.

A series of aliphatic tertiary amines (HEPES, POPSO, EPPS and BIS-TRIS) commonly used to buffer the pH in biological experiments, were examined as alternative, non-toxic co-reactants for the electrogenerated chemiluminescence (ECL) of tris(2,2'-bipyridine)ruthenium(ii) ([Ru(bpy)3](2+)). These were found to be very attractive as "multi-tasking" reagents, serving not only as co-reactants, but also fulfiling the roles of pH buffer and supporting electrolyte within an aqueous environment; thus significantly simplifying the overall ECL analysis. Sub-nanomolar detection limits were obtained for [Ru(bpy)3](2+) in the presence of BIS-TRIS, making this species an valuable option for co-reactant ECL-based bioanalytical applications.

Ab initio energy loss spectra of Si and Ge nanowires.

We report an ab initio investigation of fast electron energy-loss probability in silicon and germanium nanowires. Computed energy loss spectra are characterized by a strong enhancement of the direct interband transition peak at low energy, in good agreement with experimental data. Our calculations predict an important diameter dependence of the bulk volume plasmon peak for very thin wires which is consistent with the blue shift observed experimentally in thicker wires.

Facile formation of homoleptic Au(III) trications via simultaneous oxidation and ligand delivery from [PhI(pyridine)2](2+).

We report the first examples of Au(III) tricationic complexes bound only by neutral monodentate ligands, which are a new class of gold reagents. Oxidative addition to the bis-pyridine Au(I) cation, [Au(4-DMAP)2](+), using a series of dicationic I(III) oxidants of the general form [PhI(L)2](2+) (L = pyridine, 4-DMAP, 4-cyanopyridine) allows ready access to homoleptic and pseudo-homoleptic Au(III) complexes [Au(4-DMAP)2(L)2](3+). The facile oxidative addition of Au(I) species additionally demonstrates the efficacy of PhI(L)2](2+) reagents as halide-free oxidants for Au(I). Comparisons are made via attempts to oxidize NHC-Au(I)Cl, where introduction of the chloride anion results in complex mixtures via ligand and chloride exchange, demonstrating the advantage of using the pyridine-based homoleptic compounds. The new Au(III) trications show intriguing reactivity with water, yielding dinuclear oxo-bridged and rare terminal Au(III)-OH complexes.