ABSTRACT
Owing to its low mechanical compliance, liquid metal is intrinsically suitable for stretchable electronics and future wearable devices. However, its invariable strain-resistance behavior according to the strain-induced geometrical deformation and the difficulty of circuit patterning limit the extensive use of liquid metal, especially for strain-insensitive wiring purposes. To overcome these limitations, herein, novel liquid-metal-based electrodes of fragmented eutectic gallium-indium alloy (EGaIn) and Ag nanowire (NW) backbone of which their entanglement is controlled by the laser-induced photothermal reaction to enable immediate and direct patterning of the stretchable electrode with spatially programmed strain-resistance characteristics are developed. The coexistence of fragmented EGaIn and AgNW backbone, that is, a biphasic metallic composite (BMC), primarily supports the uniform and durable formation of target layers on stretchable substrates. The laser-induced photothermal reaction not only promotes the adhesion between the BMC layer and substrates but also alters the structure of laser-irradiated BMC. By controlling the degree of entanglement between fragmented EGaIn and AgNW, the initial conductivity and local gauge factor are regulated and the electrode becomes effectively insensitive to applied strain. As the configuration developed in this study is compatible with both regimes of electrodes, it can open new routes for the rapid creation of complex stretchable circuitry through a single process.
ABSTRACT
The patterning of polydimethylsiloxane (PDMS) into complex two-dimensional (2D) or 3D shapes is a crucial step for diverse applications based on soft lithography. Nevertheless, mould replication that incorporates time-consuming and costly photolithography processes still remains the dominant technology in the field. Here we developed monolithic quasi-3D digital patterning of PDMS using laser pyrolysis. In contrast with conventional burning or laser ablation of transparent PDMS, which yields poor surface properties, our successive laser pyrolysis technique converts PDMS into easily removable silicon carbide via consecutive photothermal pyrolysis guided by a continuous-wave laser. We obtained high-quality 2D or 3D PDMS structures with complex patterning starting from a PDMS monolith in a remarkably low prototyping time (less than one hour). Moreover, we developed distinct microfluidic devices with elaborated channel architectures and a customizable organ-on-a-chip device using this approach, which showcases the potential of the successive laser pyrolysis technique for the fabrication of devices for several technological applications.
Subject(s)
Dimethylpolysiloxanes/chemistry , Lab-On-A-Chip Devices , Lasers , Nylons/chemistry , PyrolysisABSTRACT
Recent research progress of relieving discomfort between electronics and human body involves serpentine designs, ultrathin films, and extraordinary properties of nanomaterials. However, these strategies addressed thus far each face own limitation for achieving desired form of electronic-skin applications. Evenly matched mechanical properties anywhere on the body and imperceptibility of electronics are two essentially required characteristics for future electronic-skin (E-skin) devices. Yet accomplishing these two main properties simultaneously is still very challenging. Hence, we propose a novel fabrication method to introduce kirigami approach to pattern a highly conductive and transparent electrode into diverse shapes of stretchable electronics with multivariable configurability for E-skin applications. These kirigami engineered patterns impart tunable elasticity to the electrodes, which can be designed to intentionally limit strain or grant ultrastretchability depending on applications over the range of 0 to over 400% tensile strain with strain-invariant electrical property and show excellent strain reversibility even after 10â¯000 cycles stretching while exhibiting high optical transparency (>80%). The versatility of this work is demonstrated by ultrastretchable transparent kirigami heater for personal thermal management and conformal transparent kirigami electrophysiology sensor for continuous health monitoring of human body conditions. Finally, by integrating E-skin sensors with quadrotor drones, we have successfully demonstrated human-machine-interface using our stretchable transparent kirigami electrodes.
Subject(s)
Nanostructures/chemistry , Nanowires/chemistry , Wearable Electronic Devices , Elasticity , Electric Conductivity , HumansABSTRACT
Copper nanowires (Cu NWs) are suitable material as an electrode for flexible, stretchable and wearable devices due to their excellent mechanical properties, high transparency, good conductivity, and low cost, but oxidation problem limits their practical use and application. In order to use Cu NWs as an electrode for advanced flexible, stretchable and wearable devices attached directly to the skin, the influence of the body temperature on the oxidation of Cu NWs needs to be investigated. In this paper, the oxidation behavior of Cu NWs at high temperature (more than 80 °C) as well as body temperature is studied which has been remained largely questionable to date, and an effective encapsulation method is proposed to prevent the oxidation of Cu NWs electrode in the range of body temperatures.
Subject(s)
Copper/chemistry , Nanowires/chemistry , Electrodes , Hot Temperature , Oxidation-Reduction , Wearable Electronic DevicesABSTRACT
In this Letter, we report the development of a continuously tunable color filter based on a self-assembled isotropically stretchable microbead monolayer. Spreading equidistantly upon the application of lateral strain, the isotropically stretchable monolayer serves as a dynamic diffraction grating whose diffraction angle can be mechanically modulated. Combined with a simple spatial filtering scheme, the spectra of the filtered light are solely controlled by external strain (up to 32% radial strain) to cover a broad visible spectrum. Through a finite-difference time-domain far-field diffraction simulation, we validate the working principle of the proposed color filter. The proposed continuously tunable color filter is expected to open original applications in next-generation display field.
ABSTRACT
Air quality has become a major public health issue in Asia including China, Korea, and India. Particulate matters are the major concern in air quality. We present the first environmental application demonstration of Ag nanowire percolation network for a novel, electrical type transparent, reusable, and active PM2.5 air filter although the Ag nanowire percolation network has been studied as a very promising transparent conductor in optoelectronics. Compared with previous particulate matter air filter study using relatively weaker short-range intermolecular force in polar polymeric nanofiber, Ag nanowire percolation network filters use stronger long-range electrostatic force to capture PM2.5, and they are highly efficient (>99.99%), transparent, working on an active mode, low power consumption, antibacterial, and reusable after simple washing. The proposed new particulate matter filter can be applied for a highly efficient, reusable, active and energy efficient filter for wearable electronics application.
ABSTRACT
To overcome the limitation of the conventional single axis-strain sensor, we demonstrate a multidimensional strain sensor composed of two layers of prestrained silver nanowire percolation network with decoupled and polarized electrical response in principal and perpendicular directional strain. The information on strain vector is successfully measured up to 35% maximum strain with large gauge factor (>20). The potential of the proposed sensor as a versatile wearable device has been further confirmed.
ABSTRACT
We introduce a facile method to enhance the functionality of a patterned metallic transparent conductor through selective laser ablation of metal nanowire percolation network. By scanning focused nanosecond pulsed laser on silver nanowire percolation network, silver nanowires are selectively ablated and patterned without using any conventional chemical etching or photolithography steps. Various arbitrary patterns of silver nanowire transparent conductors are readily created on the percolation network by changing various laser parameters such as repetition rate and power. The macroscopic optical and electrical properties of the percolation network transparent conductor can be easily tuned by changing the conductor pattern design via digital selective laser ablation. Further investigation on the silver nanowire based electrode line prepared by the ablation process substantiates that the general relation for a conducting thin film fails at a narrow width, which should be considered for the applications that requires a high resolution patterns. Finally, as a proof of concept, a capacitive touch sensor with diamond patterns has been demonstrated by selective laser ablation of metal nanowire percolation network.
Subject(s)
Electric Capacitance , Electric Conductivity , Lasers , Nanotechnology/instrumentation , Nanowires/chemistry , Silver/chemistry , TouchABSTRACT
A single nanowire resistive nano-heater (RNH) is fabricated, and it is demonstrated that the RNH can induce highly localized temperature fields, which can trigger highly localized thermo-chemical reactions to grow hierarchical nanowires directly at the desired specific spot such as ZnO nanowire branch growth on a single Ag nanowire.
ABSTRACT
The circulatory and respiratory systems in humans are marvels of biological engineering that exhibit competence in maintaining homeostasis. These systems not only shield the organism from external contaminants but also orchestrate the vital gases via the bloodstream to sustain cellular respiration and metabolic processes across diverse tissues. It is noticed that spaces inhabited encounter challenges akin to those of the human body: protecting the indoor air from external pollutants while removing anthropogenic byproducts like carbon dioxide (CO2), particulate matters (PM), and volatile organic compounds (VOCs) tooutside. A biomimetic approach, composed of a microbubble-based gas exchanger and circulating liquid inspired by alveoli, capillary beds, and bloodstream of the human circulatory/respiratory system, offer an innovative solution for comprehensive air purification of hermetic spaces. Circulatory/respiratory-inspired air purification system (CAPS) ensure both continuous removal of PM and exchange of gas species between indoor and outdoor environments to maintain homeostasis. The effectiveness of this system is also supported by animal behavior experiments with and without CAPS, showing an effect of reducing CO2 concentration by 30% and increasing mice locomotor activity by 53%. CAPS is expected to evolve into robust and comprehensive air purification schemes through the networked integration of plural internal and external environments.
ABSTRACT
Physical unclonable functions (PUFs) are emerging as an alternative to information security by providing an advanced level of cryptographic keys with non-replicable characteristics, yet the cryptographic keys of conventional PUFs are not reconfigurable from the ones assigned at the manufacturing stage and the overall authentication process slows down as the number of entities in the dataset or the length of cryptographic key increases. Herein, a supersaturated solution-based PUF (S-PUF) is presented that utilizes stochastic crystallization of a supersaturated sodium acetate solution to allow a time-efficient, hierarchical authentication process together with on-demand rewritability of cryptographic keys. By controlling the orientation and the average grain size of the sodium acetate crystals via a spatiotemporally programmed temperature profile, the S-PUF now includes two global parameters, that is, angle of rotation and divergence of the diffracted beam, in addition to the speckle pattern to produce multilevel cryptographic keys, and these parameters function as prefixes for the classification of each entity for a fast authentication process. At the same time, the reversible phase change of sodium acetate enables repeated reconfiguration of the cryptographic key, which is expected to offer new possibilities for a next-generation, recyclable anti-counterfeiting platform.
ABSTRACT
Manufacturing strategies to create three-dimensional (3D) structures with multifunctional nanomaterials are of intense interest for fabricating building blocks in many electromechanical applications. A coil spring composed of graphene provides an important step toward the realization of all-carbon devices, as it is one of the essential elements for a wide range of systems. In this connection, here an unprecedented fabrication strategy to create a new type of 3D coil spring composed of laser-induced graphene springs (LIG-S) which is spontaneously produced via the pyrolytic jetting technique, is presented. Similar to wood or metal shavings observed in traditional machining processes, a pair of LIG-S with two opposite chiralities and controllable macroscopic dimensions is produced by a single scanning of a focused continuous-wave (CW) laser on a polyimide (PI) substrate. The resulting LIG-S, plastic shavings by laser, exhibits sufficient mechanical and electrical properties to enable many applications including strain-tolerant spring electrodes, antennas, supercapacitors, gas sensors, and luminescent filaments under extreme conditions. Without using any conventional fabrication techniques or other labor-intensive, time-consuming, and expensive processes, this novel approach enables a high-throughput mass production of macro-, micro-, and nanoscale featured LIG-S that can be manufactured within seconds to realize many open opportunities in all-carbon electromechanical systems.
ABSTRACT
In this article, we introduce fully digital selective ZnO nanowire array growth on inkjet-printed seed patterning. Through proper natural convection suppression during hydrothermal growth, successful ZnO nanowire local growth can be achieved. Without any need for photolithographic processing or stamp preparation, the nanowire growth location can be easily modified when the inkjet printing process is integrated with a CAD (computer-aided design) system to allow a high degree of freedom when the design needs to be changed. The current proposed process is very fast, low-cost, environmentally benign, and low-temperature. Therefore, it can be applied to a flexible plastic substrate and scaled up for larger substrates for mass production or roll-to-roll processing.
ABSTRACT
In this paper we have demonstrated the simple, low cost, low temperature, hydrothermal growth of weeping willow ZnO nano-trees with very long branches to realize high efficiency dye-sensitized solar cells (DSSCs). We also discuss the effects of branching on solar cell efficiency. By introducing branched growth on the backbone ZnO nanowires (NWs), the short circuit current density and the overall light conversion efficiency of the branched ZnO NW DSSCs increased to almost four times that for vertically grown ZnO NWs. The efficiency increase is attributed to the increase in surface area for higher dye loading and light harvesting and also to reduced charge recombination through direct conduction along the crystalline ZnO branches. As the length of the branches increased, the branches became flaccid and the increase in solar cell efficiency slowed down because the effective surface area increase was hindered by branch bundling during the drying process and subsequent decrease in the dye loading.
ABSTRACT
Epitaxial growth of inorganic crystals on 2D materials is expected to greatly advance nanodevices and nanocomposites. However, because pristine surfaces of 2D materials are chemically inert, it is difficult to grow inorganic crystals epitaxially on 2D materials. Previously, successful results were achieved only by vapor-phase deposition at high temperature, and solution-based deposition including spin coating made the epitaxial growth unaligned, sparse, or nonuniform on 2D materials. Here, we show that solvent-controlled spin coating can uniformly deposit a dense layer of epitaxial AgCN microwires onto various 2D materials. Adding ethanol to an aqueous AgCN solution facilitates uniform formation of the thin supersaturated solution layer during spin coating, which promotes heterogeneous crystal nucleation on 2D material surfaces over homogeneous nucleation in the bulk solution. Microscopic analysis confirms highly aligned, uniform, and dense growth of epitaxial AgCN microwires on graphene, MoS2, hBN, WS2, and WSe2. The epitaxial microwires, which are optically observable and chemically removable, enable crystallographic mapping of grains in millimeter-sized polycrystalline graphene as well as precise control of twist angles (<â¼1°) in van der Waals heterostructures. In addition to these practical applications, our study demonstrates the potential of 2D materials as epitaxial templates even in spin coating of inorganic crystals.
ABSTRACT
Selective laser sintering of nanoparticles enables the direct and rapid formation of a functional layer even on heat-sensitive flexible and stretchable substrates, and is rising as a pioneering fabrication technology for future-oriented applications. To date, laser sintering has been successfully applied to various target nanomaterials including a wide range of metal and metal-oxide nanoparticles, and extensive investigation of relevant experimental schemes have not only reduced the minimum feature size but also have further expanded the scalability of the process. In the beginning, the selective laser sintering process was regarded as an alternative method to conventional manufacturing processes, but recent studies have shown that the unique characteristics of the laser-sintered layer may improve device performance or even enable novel functionalities which were not achievable using conventional fabrication techniques. In this regard, we summarize the current developmental status of the selective laser sintering technique for nanoparticles, affording special attention to recent emerging applications that adopt the laser sintering scheme.
ABSTRACT
Laser technology is a cutting-edge process with a unique photothermal response, precise site selectivity, and remote controllability. Laser technology has recently emerged as a novel tool in the semiconductor, display, and thin film industries by providing additional capabilities to existing high-vacuum equipment. The in situ and in operando laser assistance enables using multiple process environments with a level of complexity unachievable with conventional vacuum equipment. This broadens the usable range of process parameters and directly improves material properties, product precision, and device performance. This review paper examines the recent research trends in laser-assisted vacuum processes (LAVPs) as a vital tool for innovation in next-generation manufacturing processing equipment and addresses the unique characteristics and mechanisms of lasers exclusively used in each study. All the findings suggest that the LAVP can lead to methodological breakthroughs in dry etching, 2D material synthesis, and chemical vapor deposition for optoelectronic devices.
ABSTRACT
Precise transfer and attachment of a single nanowire to a target substrate is an interesting technique in surface engineering. The spacing, which restrains the attachment of a nanowire to a substrate, and the bending strain that occurs when the nanowire detaches from the elastomeric donor are important design parameters. In this regard, in this study, all-atom molecular dynamics (MD) simulations were conducted to analyse the mechanical behaviour of a penta-twinned silver nanowire (AgNW) placed on a polydimethylsiloxane (PDMS) donor substrate to elucidate the relevant transfer process. The bow deformation of the AgNW at the delamination front of PDMS was characterized as a function of its diameter and aspect ratio. The mechanisms of dislocation slip and propagation as well as the internal stress distribution of the AgNW were then examined. The results showed that twin boundary formation during the bow deformation is a key factor affecting the strain hardening of the AgNW and leading to complete plastic strain recovery after the removal of the PDMS substrate. Furthermore, the process was demonstrated experimentally by a localized bonding and transfer of AgNWs by continuous-wave laser irradiation. Based on the computational and experimental findings, an empirical model considering the shape parameters of AgNWs that can ensure a successful transfer process was established, which is essential for high-performance AgNW electrode design.
ABSTRACT
This paper presents an investigation of the performance of a 22 MnB5 tube after local heat treatment according to a patterning shape under dynamic crash test conditions to propose the patterning shape with the best energy absorption efficiency. Numerical simulations support experimental results to validate the deformation mode during dynamic crash test as well as the strain distribution of the specimen. The helical patterning not only demonstrates the highest axial loading force and energy absorbance in both static and dynamic crash tests, but also can be easily fabricated in a short time. The helical pattern can optimize different pitch sizes according to the thickness and diameter of the cylindrical tube, and it has the highest energy absorption rate with 83.0% in dynamic conditions.
ABSTRACT
In additive manufacturing, logical and efficient workflow optimization enables successful production and reduces cost and time. These attempts are essential for preventing fabrication problems from various causes. However, quantitative analysis and integrated management studies of fabrication issues using a digital light processing (DLP) system are insufficient. Therefore, an efficient optimization method is required to apply several materials and extend the application of the DLP system. This study proposes a sequential process optimization (SPO) to manage the initial adhesion, recoating, and exposure energy. The photopolymerization characteristics and viscosity of the photocurable resin were quantitatively analyzed through process conditions such as build plate speed, layer thickness, and exposure time. The ability of the proposed SPO was confirmed by fabricating an evaluation model using a biocompatible resin. Furthermore, the biocompatibility of the developed resin was verified through experiments. The existing DLP process requires several trials and errors in process optimization. Therefore, the fabrication results are different depending on the operator's know-how. The use of the proposed SPO enables a systematic approach for optimizing the process conditions of a DLP system. As a result, the DLP system is expected to be more utilized.