Precise Regulation in Chain-Edge Structural Microenvironments of 1D Covalent Organic Frameworks for Photocatalysis.

Covalent organic frameworks (COFs) constitute a promising research topic for photocatalytic reactions, but the rules and conformational relationships of 1D COFs are poorly defined. Herein, the chain edge structure is designed by precise modulation at the atomic level, and the 1D COFs bonded by C, O, and S elements is directionally prepared for oxygen-tolerant photoinduced electron transfer-atom transfer radical polymerization (PET-ATRP) reactions. It is demonstrated that heteroatom-type chain edge structures (─O─, ─S─) lead to a decrease in intra-plane conjugation, which restricts the effective transport of photogenerated electrons along the direction of the 1D strip. In contrast, the all-carbon type chain edge structure (─C─) with higher intra-plane conjugation not only reduces the energy loss of photoexcited electrons but also enhances the carrier density, which exhibits the optimal photopolymerization performance. This work offers valuable guidance in the exploitation of 1D COFs for high photocatalytic performance. This work offers valuable guidance in the exploitation of 1D COFs for high photocatalytic performance.

Defective UiO-66-NH2 (Zr) for Simultaneous Adsorption of Phosphate and Pb2+ for Hydrogen Peroxide Purification.

Removal of hetero ions from the hydrogen peroxide solution is a crucial step in purifying electronic-grade H2O2. Conventional adsorption materials are challenged to meet the need for the simultaneous adsorption of both anions and cations in solvents. UiO-66 (Zr) modified by acetic acid and amino group for simultaneous adsorption of phosphate and Pb2+ in H2O2 purification was fabricated in this work. The as-prepared defective UiO-66-NH2 (Zr) demonstrated a significant increase in specific surface area and porosity, along with more exposed sites for phosphate and Pb2+ adsorption. The adsorption capacity of De-UiO-66-NH2 for phosphate and Pb2+ in H2O2 solution was 52.28 mg g-1 and 35.4 mg g-1, which is 1.19 times and 1.88 times that of unmodified UiO-66 (Zr), respectively. The trace simultaneous adsorption with both 100 ppb phosphate and Pb2+ showed removal rates of 94.0% and 88.7%, respectively, confirming the practicality of MOF materials in the purification of electronic chemicals. This work highlights the potential of Zr-based MOFs as anionic and cationic simultaneous adsorbents for highly efficient purification of electronic-grade solvents.

Identifying And Unveiling the Role of Multivalent Metal States for Bidirectional UOR and HER Over Ni, Mo-Trithiocyanuric Based Coordination Polymer.

Urea oxidation reaction (UOR), an ideal alternative to oxygen evolution reaction (OER), has received increasing attention for realizing energy-saving H2 production and relieving pollutant degradation. Normally, most studied Ni-based UOR catalysts pre-oxidate to NiOOH and then act as active sites. However, the unpredictable transformation of the catalyst's structure and its dissolution and leaching, may complicate the accuracy of mechanism studies and limit its further applications. Herein, a novel self-supported bimetallic Mo-Ni-C3 N3 S3 coordination polymers (Mo-NT@NF) with strong metal-ligand interactions and different H2 O/urea adsorption energy are prepared, which realize a bidirectional UOR/hydrogen evolution reaction (HER) reaction pathway. A series of Mo-NT@NF is prepared through a one-step mild solvothermal method and their multivalent metal states and HER/UOR performance relationship is evaluated. Combining catalytic kinetics, in situ electrochemical spectroscopic characterization, and density-functional theory (DFT) calculations, a bidirectional catalytic pathway is proposed by N, S-anchored Mo5+ and reconstruction-free Ni3+ sites for catalytic active center of HER and UOR, respectively. The effective anchoring of the metal sites and the fast transfer of the intermediate H* by N and S in the ligand C3 N3 S3 H3 further contribute to the fast kinetic catalysis. Ultimately, the coupled HER||UOR system with Mo-NT@NF as the electrodes can achieve energy-efficient overall-urea electrolysis for H2 production.

Designing a Dimension Reduced Hybrid Perovskite with Robust Large Birefringence by Expanding Cationic π-Delocation.

It is in great demand to discover new materials with large birefringence for the miniaturization of optical communication devices. In this work, a new one-dimensional hybrid halide perovskite, (C6 N10 H8 )Pb2 Br6 , is obtained successfully through structural design of dimension reduction from the notable three-dimensional halide perovskite CsPbBr3 . Remarkably, (C6 N10 H8 )Pb2 Br6 exhibits a significantly enhanced birefringence of ∆n = 0.42@550 nm, which is the largest among halide perovskites so far. Furthermore, its birefringence performance is robust in a wide temperature range of 300-440 K. Theoretical calculations reveal that this outstanding birefringence results from the synergistic effect of [PbBr6 ]4- octahedra and [C6 N10 H8 ]2+ cations with expanding π-delocation. According to further structural analyses, the structural dimension reduction cooperating with the increase of [PbBr6 ]4- octahedral distortion leads to the enhanced birefringence. This work uncovers the great promise of hybrid halide perovskites as robust birefringent crystals in future optical communication and would shed useful insights on the design and synthesis of new birefringent crystals.

Facilely Control Grafting Density and Side Chain Composition of Bottlebrush Polymer.

Control over polymer architecture and composition is essential for disclosing structure-property relationships and developing high-performance materials. Herein, a new method is successfully developed to synthesize bottlebrush polymer (BP) with controllable graft density and side chain composition by "grafting-from" strategy using in situ halogen exchange and reversible chain transfer catalyzed polymerization (RTCP). The main chain of the BP is first synthesized by the polymerization of methacrylates containing alkyl bromide as a side group. Then, the alkyl bromine is quantitatively converted to alkyl iodide with sodium iodide (NaI) via in situ halogen exchange to efficiently initiate the RTCP of methacrylates. By adjusting the input amount of NaI and monomers in sequence, BP named PBPEMA-g-PMMA/PBzMA/PPEGMEMA which contains three different kinds of polymer side chains including hydrophilic PPEGMEMA, hydrophobic PMMA, and PBzMA is synthesized with narrow molecular weight distribution (Mw /Mn  ≤ 1.36). The grafting density and the chain length of each polymer side chain are well controlled by the addition of NaI in batches and following RTCP. Moreover, the obtained BP self-assembled into spherical vesicles in aqueous with hydrophilic coronal structure, core region, and the hydrophobic wall between the former two, which enables to wrap hydrophobic pyrene and hydrophilic Rhodamine 6G separately or simultaneously.

Micropore-Forming Gelatin Methacryloyl (GelMA) Bioink Toolbox 2.0: Designable Tunability and Adaptability for 3D Bioprinting Applications.

It is well-known that tissue engineering scaffolds that feature highly interconnected and size-adjustable micropores are oftentimes desired to promote cellular viability, motility, and functions. Unfortunately, the ability of precise control over the microporous structures within bioinks in a cytocompatible manner for applications in 3D bioprinting is generally lacking, until a method of micropore-forming bioink based on gelatin methacryloyl (GelMA) was reported recently. This bioink took advantage of the unique aqueous two-phase emulsion (ATPE) system, where poly(ethylene oxide) (PEO) droplets are utilized as the porogen. Considering the limitations associated with this very initial demonstration, this article has furthered the understanding of the micropore-forming GelMA bioinks by conducting a systematic investigation into the additional GelMA types (porcine and fish, different methacryloyl-modification degrees) and porogen types (PEO, poly(vinyl alcohol), and dextran), as well as the effects of the porogen concentrations and molecular weights on the properties of the GelMA-based ATPE bioink system. This article exemplifies not only the significantly wider range of micropore sizes achievable and better emulsion stability, but also the improved suitability for both extrusion and digital light processing bioprinting with favorable cellular responses.

Influence of the Building Unit on Covalent Organic Frameworks in Mediating Photo-induced Energy-Transfer Reversible Complexation-Mediated Radical Polymerization (PET-RCMP).

Two imine-based covalent organic framework photocatalysts with different building units, TPB-DMTA-COF and TAT-DMTA-COF, for photo-induced energy transfer reversible complexation-mediated radical polymerization (PET-RCMP) were developed and investigated, producing ideal polymers with accurate molecular weight and moderate dispersity under visible light irradiation. The chain extension and spatiotemporal control experiments revealed the high chain-end fidelity of polymers and the compatibility of RCMP processes in both bulk and aqueous system. Moreover, density functional theory (DFT) calculations verified that heteroatom-doped TAT-DMTA-COF exhibits higher activities for weakening C-I bond energy barrier, which promotes PET-RCMP polymerization performance. This work demonstrates that rational adjustment of building block for constructing COF heterogeneous photocatalyst can enhance the catalytic performance of PET-RCMP, providing a design methodology for the development of polymeric organic photoelectric semiconductor catalysts to mediate RCMP.

Visible Light-Regulated Heterogeneous Catalytic PET-RAFT by High Crystallinity Covalent Organic Framework.

Covalent organic frameworks (COFs) are a class of promising photocatalysts for conversing light energy into chemical energy. Based on the tunable building blocks, COFs can be well-designed as photocatalyst for mediating reversible addition-fragmentation chain-transfer (RAFT) polymerization. Herein, 1,3,6,8-tetrakis(4-formylphenyl)pyrene (TFPPy) and 2,2″-bipyridine-5,5″-diamine (Bpy) are chosen to construct imine-based TFPPy-Bpy-COFs for catalyzing RAFT polymerization of methacrylates under white light irradiation. The well-defined polymers with precise molecular weight and narrow molecular weight distribution are obtained. The switch on/off light experiments suggest excellent temporal control toward RAFT polymerization system and the chain-extension reaction indicates high chain-end fidelity of macro-initiators. Mechanism study clarifies that the electron transfer between excited state of TFPPy-Bpy-COFs and RAFT agent can form living radicals to mediate polymerization. This methodology provides a novel platform for reversible-deactivation radical polymerization using COFs as heterogeneous catalysts.

Phosphorescent iridium(III) complex for efficient sensing of hypochlorite and imaging in living cells.

In consideration of the strong oxidizing power of hypochlorite (ClO-), which could cleave CN moiety, a cyclometalated iridium (III) complex (Ir-Ts) modified hydrazide group as the response unit was synthesized to sensitively and selectively detect ClO- under neutral condition. Upon addition of ClO-, a 21-fold emission enhancement at 574 nm was observed and phosphorescent product was formed due to the cleavage of CN moiety. The probe Ir-Ts displayed rapid response (<15 s) and high selectivity toward ClO- with a low detection limit of 86 nM. More importantly, bioimaging of ClO- was further studied in living cells.

A cyclometalated iridium(III) complex-based fluorescence probe for hypochlorite detection and its application by test strips.

A new cyclometalated iridium(III) complex-based fluorescence probe (IrCN) for hypochlorite (ClO-) has been synthesized and characterized. The probe displayed nonfluorescent around 577 nm, while a 54-fold enhancement in fluorescence emission intensity was observed after the addition of ClO- due to the removal of C=N isomerization effect. Such "turn-on" fluorescence probe worked excellently in wide pH range (5-12) with short response time (<20 s) and the detection limit was as low as 0.11 µM. In addition, IrCN exhibited high selectivity towards ClO- even in the presence of other competing species. Furthermore, IrCN was successfully integrated in fluorescent test strips for real-time detection of ClO-.

Effects of C-Related Dangling Bonds and Functional Groups on the Fluorescent and Electrochemiluminescent Properties of Carbon-Based Dots.

Single-layer carbon-based dots (SCDs) were chosen as a model to investigate the effect of the C-related dangling bonds with spin S=1/2 and functional groups on the electrochemiluminescent (ECL) and fluorescent (FL) properties of CDs. The C-related dangling bonds and functional groups of SCDs were tuned by chemical reduction with NaBH4 . There have several main findings via investigating the ECL and FL properties of SCDs before and after the chemical reduction. First, the FL and ECL of CDs are highly dependent on their concentration, and luminescent resonance energy transfer is observed in ECL studies when the concentration of CDs is high. Second, the ECL activity of CDs is greatly enhanced as the C-related dangling bonds increase, proving that the ECL of CDs originates from the C-related dangling bonds. Third, the FL of CDs is the synthesis of the inner FL originated from the contained isolated sp2 units and the defect FL from the C-related dangling bonds. The inner FL of CDs is enhanced greatly by removing the carboxyl groups, while the defect FL is increased slightly due to the increased C-related dangling bonds. We believe this study would promote our understanding in the ECL and FL mechanisms of CDs, advancing the applications of CDs based on their ECL and FL properties.

Distinctive Performance of Gemini Surfactant in the Preparation of Hierarchically Porous Carbons via High-Internal-Phase Emulsion Template.

The superior capability of gemini surfactant (GS) in the preparation of hierarchically porous carbons via high-internal-phase emulsion (HIPE) template followed by pyrolysis was confirmed in this work. Polymerized HIPEs (polyHIPEs) of phenol-formaldehyde resin were prepared by cross-linking the continuous phase of HIPEs stabilized by GS. Nonionic surfactant and cationic surfactant were also selected to stabilize HIPE for comparison. From scanning electron microscope observations, polyHIPEs with open-cell pore architectures were obtained with GS as emulsifier (polyHIPEs-GS) and the derived carbon foams (carboHIPEs-GS) well retained the original pore architectures, whereas polyHIPEs obtained using contrastive surfactants showed closed-cell porous structures and notable differences were observed for the derived carboHIPEs. Nitrogen adsorption/desorption measurements indicated that polyHIPEs-GS and carboHIPEs-GS both exhibited hierarchically porous architectures with much higher surface areas (SA) than those of the corresponding contrast samples. Mercury intrusion porosimetry results indicated that carboHIPEs-GS possessed higher SA and higher porosity than that of the contrast samples. The open-cell pore architecture and high SA are favorable to many applications, like energy storage. carboHIPE-GS expectably showed a higher capacitance than that of contrast samples when used as the electrode material of supercapacitor.

Humidity-Responsive Gold Aerogel for Real-Time Monitoring of Human Breath.

Humidity sensors have received considerable attention in recent years because of their significance and wide applications in agriculture, industries, goods stores, and medical fields. However, the conventional humidity sensors usually possessed a complex sensing mechanism and low sensitivity and required a time-consuming, labor-intensive process. The exploration for an ideal sensing material to amplify the sensitivity of humidity sensors is still a big challenge. Herein, we developed a simple, low-cost, and scalable fabrication strategy to construct a highly sensitive humidity sensor based on polymer/gold nanoparticle (AuNP) hybrid materials. The hybrid polymer/AuNP aerogel was prepared by a simple freeze-drying method. By taking advantage of the conductivity of AuNPs and high surface area of the highly porous structure, the hybrid poly- N-isopropylacrylamide (PNIPAm)/AuNP aerogel showed high sensitivity to water molecules. Interestingly, the hybrid PNIPAm/AuNP aerogel-based humidity sensor can be used to detect human breath in different states, such as normal breath, fast breath, and deep breath, or in different individuals such as persons with illness, persons who are smoking, and persons who are normal, which is promising in practical flexible wearable devices for human health monitoring. In addition, the humidity sensor can be used in whistle tune recognition.

Aggregation morphologies of a series of heterogemini surfactants with a hydroxyl head group in aqueous solution.

The aggregation behaviors of a series of heterogemini surfactants N,N-dimethyl-N-[3-(alkyloxy)-2-hydroxypropyl]-alkylammonium bromide, abbreviated as CmOhpNCn (m, n = 10, 8; 10, 14; 12, 8; 12, 10; 12, 12; 12, 14; 14, 8 and 14, 10), have been investigated in aqueous solution. Electric conductivity, steady-state and frequency sweep rheological measurements were adopted to study the micellar morphology affected by molecular structure, concentration and temperature, and a close relationship among them was established. Electric conductivity measurement results indicated that Krafft temperatures were mainly related to the total number of carbon atoms, while the CMC values were affected by the combined factors of alkyl chain length, degree of dissymmetry and hydroxyl head group. And some unusual values may come from the poor water solubility induced by the relatively long alkyl chain n. Dynamic rheological results and cryo-TEM images revealed various micellar behaviors of CmOhpNC8 affected by different combined factors. When m value was increased, the formation of quite long rodlike or wormlike micelles derived from the enhanced hydrophobility and hydrogen bonding. And the effect of concentration on aggregation behavior was similar to that of m value except for formation of micellar joints. With temperature increase, the decreased viscosity of C14OhpNC8 was due to formation of micellar joints and weakening of hydrogen bonding, which could be confirmed by dynamic light scattering (DLS). Furthermore, the C14OhpNC8 aggregates formed below the Krafft temperature were more likely to be affected by temperature at high concentrations.

Synthesis, characterization and cytocompatibility of a degradable polymer using ferric catalyst for esophageal tissue engineering.

This study focused on the synthesis, characterization and cytocompatibility of a biodegradable polymer by the cross-linking from poly(ethylene glycol-co-lactide) dimethacrylate (PLEGDMA), polyethylene glycol diacrylate (PEGDA) and N-isopropylacrylamide, where PLEGDMA was synthesized by ring-opening oligomerization of poly(ethylene glycol) with different molecular weights (Mn = 400, 600, 1000, 2000 Da) and L-lactide using low toxic iron(III) acetylacetonate (Fe(acac)3) as the catalyst and subsequently being terminated with dimethacrylate. The product, PLEGDMA, was analyzed to confirm its chemistry using FTIR spectroscopy, (1)H NMR spectra and gel permeation chromatography etc. The thermodynamic properties, mechanical behaviors, surface hydrophilicity, degradability and cytotoxicity of the cross-linked product were evaluated by differential scanning calorimetry, tensile tests, contact angle measurements and cell cultures. The effects of reaction variables such as PEGDA content and reactants ratio were optimized to achieve a material with low glass transition temperature (Tg), high wettability and preferable mechanical characteristics. Using a tubular mould which has been patented in our group, a tubular scaffold with predetermined dimension and pattern was fabricated, which aims at guiding the growth and phenotype regulation of esophageal primary cells like fibroblast and smooth muscle cell towards fabricating tissue engineered esophagus in future.

Spatially Amplified and Rigid Junction in Diblock Copolymers: Reduced Microphase Separation Size via Interface Expansion.

We introduce an approach in diblock copolymer design, where modifying the junction point with rigid bulky monomer expands the cross-sectional area of the interface and leads to a decrease in the repeat period. Using living anionic polymerization, we synthesized a series of dialkynyl midfunctionalized poly(styrene-b-methyl methacrylate) (PSM-DA) and functionalized them using the thiol-alkyne click reaction with specifically selected rigid bulky monomers: PSS-(3-mercapto)propyl-heptaisobutyl substituted (PSS) and 1-adamantanethiol (ADA). This modification, though involving only a single monomer unit within the diblock copolymer structure, brought about a significant reduction in domain size, with PSS and ADA reducing it by 18% and 15%, respectively. The results indicate a method for reducing the domain sizes of block copolymers, which could lead to advancements in lithography and various nanotechnological applications.

Revealing the contradiction between DLVO/XDLVO theory and membrane fouling propensity for oil-in-water emulsion separation.

Oil fouling is the crucial issue for the separation of oil-in-water emulsion by membrane technology. The latest research found that the membrane fouling rate was opposite to the widely used theoretical prediction by Derjaguin-Landau-Verwey-Overbeek (DLVO) or extended DLVO (XDLVO) theory. To interpret the contradiction, the molecular dynamics was adopted to explore the molecular behavior of oil and emulsifier (Tween 80) at membrane interface with the assistance of DLVO/XDLVO theory and membrane fouling models. The decreased flux attenuation and fitting of fouling models proved that the existence of Tween 80 effectively alleviated membrane fouling. Conversely, DLVO/XDLVO theory predicted that the membrane fouling should be exacerbated with the increase of Tween 80 concentration in O/W emulsion. This contradiction originated from the different interaction energy between oil/Tween 80 molecules and polyether sulfone (PES) membrane. The favorable free energy of Tween 80 was resulted from the sulfuryl groups in PES and hydrogen bonds (O-H…O) formation further strengthened the interaction. Therefore, Tween 80 could preferentially adsorb on membrane surface and form an isolation layer by demulsification and steric hindrance and resist the aggregation of oil, which effectively alleviated membrane fouling. This study provided a new insight in the interpretation of interaction in O/W emulsion.

Targeting Nanomotor with Near-Infrared/Ultrasound Triggered-Transformation for Polystage-Propelled Cascade Thrombolysis and Multimodal Imaging Diagnosis.

Nowadays, cardiovascular and cerebrovascular diseases caused by venous thromboembolism become main causes of mortality around the world. The current thrombolytic strategies in clinics are confined primarily due to poor penetration of nanoplatforms, limited thrombolytic efficiency, and extremely-low imaging accuracy. Herein, a novel nanomotor (NM) is engineered by combining iron oxide/perfluorohexane (PFH)/urokinase (UK) into liposome nanovesicle, which exhibits near-infrared/ultrasound (NIR/US) triggered transformation, achieves non-invasive vein thrombolysis, and realizes multimodal imaging diagnosis altogether. Interestingly, a three-step propelled cascade thrombolytic therapy is revealed from such intelligent NM. First, the NM is effectively herded at the thrombus site under guidance of a magnetic field. Afterwards, stimulations of NIR/US propel phase transition of PFH, which intensifies penetration of the NM toward deep thrombus dependent on cavitation effect. Ultimately, UK is released from the collapsed NM and achieves pharmaceutical thrombolysis in a synergistic way. After an intravenous injection of NM in vivo, the whole thrombolytic process is monitored in real-time through multimodal photoacoustic, ultrasonic, and color Doppler ultrasonic imagings. Overall, such advanced nanoplatform provides a brand-new strategy for time-critical vein thrombolytic therapy through efficient thrombolysis and multimodal imaging diagnosis.

Construction of Hierarchical Porous UiO-66-Br2@PS/DVB-Packed Columns by High Internal Phase Emulsion Strategy for Enhanced Separation of CF4/N2 and SF6/N2.

Recovery and separation of anthropogenic emissions of electronic specialty gases (F-gases, such as CF4 and SF6) from the semiconductor sector are of critical importance. In this work, the hierarchical porous UiO-66-Br2@PS/DVB-packed column was constructed by a high internal phase emulsions strategy. UiO-66-Br2@PS/DVB exhibits a superior selectivity of CF4/N2 (2.67) and SF6/N2 (3.34) predicted by the IAST due to the diffusion limitation in the micropore and the gas-framework affinity. Especially, UiO-66-Br2@PS/DVB showed significant CF4 and SF6 retention and enabled the successful separation of CF4/N2 and SF6/N2 with a resolution of 2.37 and 8.89, respectively, when used as a packed column in gas chromatography. Compared with the Porapak Q column, the HETP of the UiO-66-Br2@PS/DVB-packed column decreased and showed good reproducibility. This research not only offers a convenient method for fabricating a hierarchical porous MOF-packed column but also showcases the prospective utilization of MOFs for the separation of the F-gas/N2 mixture.

Influence laws of air gap structure manipulation of covalent organic frameworks on dielectric properties and exciton effects for photopolymerization.

Boosting the dissociation of excitons is essential to enhance the photocatalytic efficiency. However, the relationship between the structure of the catalyst and the exciton effect on the photocatalytic activity is still unclear as the main problem. Here, it is proposed that as a descriptive factor, an experimentally measurable dielectric constant (εr) is available to quantitatively describe its relationship with exciton binding energy (Eb) and photocatalytic activity. With tuning the linker of covalent organic frameworks (COFs), the "air gap" structure is oriented to shrink, leading to an increased εr of COFs and a lower Eb to facilitate exciton dissociation. Meanwhile, taking "water-/oxygen-fueled" photo-induced electron transfer reversible addition-fragmentation chain transfer (PET-RAFT) polymerization as a demonstration platform, it can be seen that COFs with a small "air gap" structure have relatively superior photocatalytic activity. This provides important implications for the evolution of efficient photocatalysts.