Your browser doesn't support javascript.
loading
Show: 20 | 50 | 100
Results 1 - 6 de 6
Filter
1.
ACS Omega ; 9(23): 24819-24830, 2024 Jun 11.
Article in English | MEDLINE | ID: mdl-38882087

ABSTRACT

The impacts of the composition and properties of tar products on their utilization are of great importance, while the consequences of varying tar separation conditions on distillation fractions remain underexplored. Solid impurities in special tar products (e.g., subsurface in situ pyrolysis-derived tar-like substances) can contribute to the separation as well. In the present study, low-temperature coal tar (LTCT) was used as an analogue to pyrolysis product, mixed with semi-coke and coal dust, representing pyrolytic byproducts and nonpyrolytic substances, respectively. The LTCT mixtures were tested with vacuum distillation at various pressures and temperatures. The results revealed the role of pressure in fraction distribution across temperatures, with higher pressure concentrating fractions at lower temperatures. The impact of solid impurities on distillation primarily stemmed from adsorption. Minimal concentrations of solid impurities carried coal dust/semi-coke into the distillation, but higher levels retained them in the residue. The adsorption of coal dust was quite high at lower temperatures and waned as temperature increased, unlike semi-coke, which had consistent adsorption throughout the distillation. The present study can advance the understanding of vacuum distillation for tar products in the presence of solid impurities, offering a framework for the effective distillation/utilization of coal tar. By probing separation conditions, tar properties, and solid impurity effects, the present research will refine strategies for optimizing coal tar use, crucial for enhancing energy security and sustainable progress in China.

2.
ACS Omega ; 9(6): 7132-7142, 2024 Feb 13.
Article in English | MEDLINE | ID: mdl-38371767

ABSTRACT

The recovery of low-grade waste heat from power plants greatly benefits energy conservation and emission reduction during electricity generation, while the waste heat utilization directly from desulfurization slurry is a significantly promising method to deeply recover such low-grade energy and has been developed in practical application. However, the pipe materials are subjected to erosion and corrosion challenges due to the high level of solid compositions and the presence of harmful ions, such as Cl-1, which requires further evaluation under the condition of slurry heat exchange. The present study aimed at an experimental study on the erosion-corrosion characteristics of desulfurization slurry on three types of stainless steel, including type 304, 316L, and 2205. Both mass loss and micromorphology features were analyzed with possible mechanisms elucidated. The erosion-corrosion rate is weak at low temperatures, while the increase in the slurry temperature clearly promotes its rate. The influence of the temperature on the corrosion resistance of 304 is much greater than that of 2205. With an increase in duration time, the weight loss rate of stainless steel in the desulfurization slurry declines, and the changing trend of metal mass slightly slows down. The present study offers a better understanding of the erosion-corrosion behaviors of three types of stainless steel under flow and heat transfer conditions of a desulfurization slurry.

3.
Emerg Microbes Infect ; 13(1): 2343912, 2024 Dec.
Article in English | MEDLINE | ID: mdl-38629574

ABSTRACT

Human infections with the H7N9 influenza virus have been eliminated in China through vaccination of poultry; however, the H7N9 virus has not yet been eradicated from poultry. Carefully analysis of H7N9 viruses in poultry that have sub-optimal immunity may provide a unique opportunity to witness the evolution of highly pathogenic avian influenza virus in the context of vaccination. Between January 2020 and June 2023, we isolated 16 H7N9 viruses from samples we collected during surveillance and samples that were sent to us for disease diagnosis. Genetic analysis indicated that these viruses belonged to a single genotype previously detected in poultry. Antigenic analysis indicated that 12 of the 16 viruses were antigenically close to the H7-Re4 vaccine virus that has been used since January 2022, and the other four viruses showed reduced reactivity with the vaccine. Animal studies indicated that all 16 viruses were nonlethal in mice, and four of six viruses showed reduced virulence in chickens upon intranasally inoculation. Importantly, the H7N9 viruses detected in this study exclusively bound to the avian-type receptors, having lost the capacity to bind to human-type receptors. Our study shows that vaccination slows the evolution of H7N9 virus by preventing its reassortment with other viruses and eliminates a harmful characteristic of H7N9 virus, namely its ability to bind to human-type receptors.


Subject(s)
Chickens , Influenza A Virus, H7N9 Subtype , Influenza Vaccines , Influenza in Birds , Vaccination , Animals , Influenza A Virus, H7N9 Subtype/genetics , Influenza A Virus, H7N9 Subtype/immunology , Influenza A Virus, H7N9 Subtype/pathogenicity , Chickens/virology , Influenza Vaccines/immunology , Influenza Vaccines/administration & dosage , Influenza in Birds/virology , Influenza in Birds/prevention & control , Influenza in Birds/immunology , Mice , Humans , China , Evolution, Molecular , Influenza, Human/prevention & control , Influenza, Human/virology , Influenza, Human/immunology , Mice, Inbred BALB C , Virulence , Phylogeny , Female , Poultry Diseases/virology , Poultry Diseases/prevention & control , Poultry/virology
4.
BJS Open ; 8(1)2024 Jan 03.
Article in English | MEDLINE | ID: mdl-38190579

ABSTRACT

BACKGROUND: High tumour budding has been indicated as a risk factor of poor survival in colorectal cancer. This study aimed to investigate the impact of tumour budding grades and the use of adjuvant chemotherapy on prognosis in patients with colorectal cancer. METHODS: This study included consecutive colorectal cancer patients who underwent radical surgery for primary colorectal adenocarcinoma at The Sixth Hospital of Sun Yat-sen University between 2009 and 2019. Tumour budding was assessed based on the recommendations of the International Tumor Budding Consensus Conference using haematoxylin and eosin (H&E)-stained slides with tumour samples. The primary outcome of interest was to correlate tumour budding with disease-free survival and overall survival; the secondary outcome was investigation of the impact of adjuvant therapy on different tumour budding grades. In addition, a subgroup analysis was performed for the effects of lymphocytic infiltration on adjuvant chemotherapy in patients with Bd3. RESULTS: Of 709 eligible patients, 412 with colorectal cancer were included. According to the International Tumor Budding Consensus Conference, 210 (50.9 per cent), 127 (30.8 per cent) and 75 (18.2 per cent) were classified as low budding (Bd1), intermediate budding (Bd2) and high budding (Bd3) respectively. Patients with Bd1, Bd2 and Bd3 had 5-year disease-free survival rates of 82.9 per cent, 70.1 per cent and 49.3 per cent respectively, and 5-year overall survival rates of 90 per cent, 79.5 per cent and 62.7 per cent respectively (P <0.001). Adjuvant chemotherapy yielded a significant survival benefit in patients with Bd3 (5-year disease-free survival, 65 per cent versus 31.4 per cent, P <0.001; 5-year overall survival, 84.4 per cent versus 63.1 per cent, P <0.001), but not in those with Bd1 or Bd2. In patients with Bd3, the benefit of adjuvant chemotherapy was maintained in those with low, but not high lymphocytic infiltration. CONCLUSION: High grade of tumour budding was strongly correlated with poorer survival outcomes in colorectal cancer. Patients with Bd3 benefited from adjuvant chemotherapy, with the exclusion of patients with high lymphocytic infiltration.


Subject(s)
Colorectal Neoplasms , Humans , Chemotherapy, Adjuvant , Combined Modality Therapy , Consensus , Disease-Free Survival , Colorectal Neoplasms/drug therapy
SELECTION OF CITATIONS
SEARCH DETAIL