ABSTRACT
ConspectusThe heterogeneous coprecipitation of nanocrystals with metals on substrates plays a significant role in both natural and engineered systems. Due to the small dimensions and thereby the large specific surface area, nanocrystal coprecipitation with metals, which is ubiquitous in natural settings, exerts drastic effects on the biogeochemical cycling of metals on the earth's crust. Meanwhile, the controlled synthesis of nanocrystals with metal doping to achieve tunable size/composition enables their broad applications as adsorbents and catalysts in many engineered settings. Despite their importance, complex interactions among aqueous ions/polymers, nanocrystals, substrates, and metals are far from being well-understood, leaving the controlling mechanisms for nanocrystal formation with metals on substrates uncovered.In this Account, we discuss our systematic investigation over the past 10 years of the heterogeneous formation of representative nanocrystals with metals on typical substrates. We chose Fe(OH)3 and BaSO4 as representative nanocrystals. Mechanisms for varied metal coprecipitation were also investigated for both types of nanocrystals (i.e., Fe, Al, Cr, Cu, and Pb)(OH)3 and (Ba, Sr)(SO4, SeO4, and SeO3)). Bare SiO2 and Al2O3, as well as those coated with varied organics, were selected as geologically or synthetically representative substrates. Through the integration of state-of-the-art nanoscale interfacial characterization techniques with theoretical calculations, the complex interactions during nanocrystal formation at interfaces were probed and the controlling mechanisms were identified.For BaSO4 and Fe(OH)3 formation on substrates, the local supersaturation levels near substrates were controlled by Ba2+ adsorption and the electrostatic attraction of Fe(OH)3 monomer/polymer to substrates, respectively. Meanwhile, substrate hydrophobicity controlled the interfacial energy for the nucleation of both nanocrystals on (in)organic substrates. Metal ions' (i.e., Cr/Al/Cu/Pb) hydrolysis constants and substrates' dielectric constants controlled metal ion adsorption onto substrates, which altered the surface charges of substrates, thus controlling heterogeneous Fe(OH)3 nanocrystal formation on substrates by electrostatic interactions. The sizes and compositions of heterogeneous (Fe, Cr)(OH)3 and (Ba, Sr)(SO4, SeO4, SeO3) formed on substrates were found to be distinct from those of homogeneous precipitates formed in solution. The substrate (de)protonation could alter the local solution's pH and the substrates' surface charge; substrates could also adsorb cations, affecting local Fe/Cr/Ba/Sr ion concentrations at solid-water interfaces, thus controlling the amount/size/composition of nanocrystals by tuning their nucleation/growth/deposition on substrates. From slightly supersaturated solution, homogeneous coprecipitates of microsized (Ba, Sr)(SO4, SeO4, SeO3) formed through growth, with little Sr/Se(VI) incorporation due to higher solubilities of SrSO4 and BaSeO4 over BaSO4. While cation enrichment near substrates made the local solution highly supersaturated, nanosized coprecipitates formed on substrates through nucleation, with more Sr/Se(VI) incorporation due to lower interfacial energies of SrSO4 and BaSeO4 over BaSO4. The new insights gained advanced our understanding of the biogeochemical cycling of varied elements at solid-water interfaces and of the controlled synthesis of functional nanocrystals.
ABSTRACT
Iron/chromium hydroxide coprecipitation controls the fate and transport of toxic chromium (Cr) in many natural and engineered systems. Organic coatings on soil and engineered surfaces are ubiquitous; however, mechanistic controls of these organic coatings over Fe/Cr hydroxide coprecipitation are poorly understood. Here, Fe/Cr hydroxide coprecipitation was conducted on model organic coatings of humic acid (HA), sodium alginate (SA), and bovine serum albumin (BSA). The organics bonded with SiO2 through ligand exchange with carboxyl (-COOH), and the adsorbed amounts and pKa values of -COOH controlled surface charges of coatings. The adsorbed organic films also had different complexation capacities with Fe/Cr ions and Fe/Cr hydroxide particles, resulting in significant differences in both the amount (on HA > SA(-COOH) â« BSA(-NH2)) and composition (Cr/Fe molar ratio: on BSA(-NH2) â« HA > SA(-COOH)) of heterogeneous precipitates. Negatively charged -COOH attracted more Fe ions and oligomers of hydrolyzed Fe/Cr species and subsequently promoted heterogeneous precipitation of Fe/Cr hydroxide nanoparticles. Organic coatings containing -NH2 were positively charged at acidic pH because of the high pKa value of the functional group, limiting cation adsorption and formation of coprecipitates. Meanwhile, the higher local pH near the -NH2 coatings promoted the formation of Cr(OH)3. This study advances fundamental understanding of heterogeneous Fe/Cr hydroxide coprecipitation on organics, which is essential for successful Cr remediation and removal in both natural and engineered settings, as well as the synthesis of Cr-doped iron (oxy)hydroxides for material applications.
Subject(s)
Chromium , Hydroxides , Iron , Hydroxides/chemistry , Iron/chemistry , Chromium/chemistry , Serum Albumin, Bovine/chemistry , Adsorption , Humic Substances , Water/chemistry , Chemical Precipitation , Alginates/chemistryABSTRACT
The simultaneous precipitation of (Fe, Cr)(OH)3 nanoparticles in solution (homogeneous) and on soil surfaces (heterogeneous), which controls Cr transport in soil and aquatic systems, was quantified for the first time in the presence of model surfaces, i.e., bare and natural organic matter (NOM)-coated SiO2 and Al2O3. Various characterization techniques were combined to explore the surface-ion-precipitate interactions and the controlling mechanisms. (Fe, Cr)(OH)3 accumulation on negatively charged SiO2 was mainly governed by electrostatic interactions between hydrolyzed ion species or homogeneous (Fe, Cr)(OH)3 and surfaces. The elevated pH through protonation of Al2O3 surface hydroxyls resulted in higher Cr/Fe ratios in both homogeneous and heterogeneous coprecipitates. Due to ignorable NOM adsorption onto SiO2, the amounts of (Fe, Cr)(OH)3 precipitates on bare/NOM-SiO2 were similar; contrarily, attributed to favored NOM adsorption onto Al2O3 and consequently carboxyl association with metal ions or (Fe, Cr)(OH)3 nanoparticles, remarkably more heterogeneous precipitates harvested on NOM-Al2O3 than bare-Al2O3. With the same solution supersaturation, the total amounts of homogeneous and heterogeneous precipitates were similar irrespective of the substrate type. With lower pH, decreased electrostatic forces between substrates and precipitates shifted (Fe, Cr)(OH)3 distribution from heterogeneous to homogeneous phases. The quantitative knowledge of (Fe, Cr)(OH)3 distribution and the controlling mechanisms can assist in better Cr sequestration in natural and engineered settings.
Subject(s)
Nanoparticles , Soil , Silicon Dioxide , Metals , Nanoparticles/chemistry , Hydrogen-Ion Concentration , AdsorptionABSTRACT
Coprecipitation of selenium oxyanions with barite is a facile way to sequester Se in the environments. However, the chemical composition of Se-barite coprecipitates usually deviates from that predicted from thermodynamic calculations. This discrepancy was resolved by considering variations in nucleation and growth rates controlled by ion-mineral interactions, solubility, and interfacial energy. For homogeneous precipitation, â¼10% of sulfate, higher than thermodynamic predictions (<0.3%), was substituted by Se(IV) or Se(VI) oxyanion, which was attributed to adsorption-induced entrapment during crystal growth. For heterogeneous precipitation, thiol- and carboxylic-based organic films, utilized as model interfaces to mimic the natural organic-abundant environments, further enhanced the sequestration of Se(VI) oxyanions (up to 41-92%) with barite. Such enhancement was kinetically driven by increased nucleation rates of selenate-rich barite having a lower interfacial energy than pure barite. In contrast, only small amounts of Se(IV) oxyanions (â¼1%) were detected in heterogeneous coprecipitates mainly due to a lower saturation index of BaSeO3 and deprotonation degree of Se(IV) oxyanion at pH 5.6. These roles of nanoscale mineralization mechanisms observed during composition selection of Se-barite could mark important steps toward the remediation of contaminants through coprecipitation.
Subject(s)
Selenious Acid , Selenium , Selenic Acid , Barium Sulfate , Adsorption , SulfatesABSTRACT
Sr-bearing marine barite [(Ba x , Sr1-x )SO4] cycling has been widely used to reconstruct geochemical evolutions of paleoenvironments. However, an understanding of barite precipitation in the ocean, which is globally undersaturated with respect to barite, is missing. Moreover, the reason for the occurrence of higher Sr content in marine barites than expected for classical crystal growth processes remains unknown. Field data analyses suggested that organic molecules may regulate the formation and composition of marine barites; however, the specific organic-mineral interactions are unclear. Using in situ grazing incidence small-angle X-ray scattering (GISAXS), size and total volume evolutions of barite precipitates on organic films were characterized. The results show that barite forms on organic films from undersaturated solutions. Moreover, from a single supersaturated solution with respect to barite, Sr-rich barite nanoparticles formed on organics, while micrometer-size Sr-poor barites formed in bulk solutions. Ion adsorption experiments showed that organic films can enrich cation concentrations in the adjacent solution, thus increasing the local supersaturation and promoting barite nucleation on organic films, even when the bulk solution was undersaturated. The Sr enrichment in barites formed on organic films was found to be controlled by solid-solution nucleation rates; instead, the Sr-poor barite formation in bulk solution was found to be controlled by solid-solution growth rates. This study provides a mechanistic explanation for Sr-rich marine barite formation and offers insights for understanding and controlling the compositions of solid solutions by separately tuning their nucleation and growth rates via the unique chemistry of solution-organic interfaces.
ABSTRACT
Prior mineral scaling investigations mainly studied the effects of membrane surface properties rather than on the mineral properties and their impact on membrane permeability. In our study, mass, crystal growth orientation, and crystallinity of mineral precipitates on membranes, as well as their effects on membrane permeability have been investigated. Gypsum scaling tests on bare and bovine serum albumin (BSA)-conditioned membranes were conducted under different saturation indices. Results show that a longer scaling period was required for BSA-conditioned membranes to reach the same membrane permeate flux decline as bare membranes. Though the final reduced permeability was the same for both two membranes, the masses of the mineral precipitates on BSA-conditioned membranes were around two times more than those on bare membranes. Further mineral characterizations confirmed that different permeability decay rates of both types of the membrane were attributed to the differences in growth orientations rather than amounts of gypsum precipitates. Moreover, BSA-conditioned layers with high carboxylic density and specific molecular structure could stabilize bassanite and disrupt the oriented growth to inhibit the formation of needle-like gypsum crystals as observed on bare membranes, thus resulting in lower surface coverage with scales on membranes and alleviating the detrimental scaling effect on membrane permeability.
Subject(s)
Water Purification , Membranes, Artificial , Minerals , Osmosis , PermeabilityABSTRACT
Iron hydroxides are important scavengers for dissolved chromium (Cr) via coprecipitation processes; however, the influences of organic matter (OM) on Cr sequestration in Fe/Cr-OM ternary systems and the stability of the coprecipitates are not well understood. Here, Fe/Cr-OM coprecipitation was conducted at pH 3, and Cr hydroxide was undersaturated. Acetic acid (HAc), poly(acrylic acid) (PAA), and Suwannee River natural organic matter (SRNOM) were selected as model OMs, which showed different complexation capabilities with Fe/Cr ions and Fe/Cr hydroxide particles. HAc had no significant effect on the coprecipitation, as the monodentate carboxyl ligand in HAc did not favor complexation with dissolved Fe/Cr ions or Fe/Cr hydroxide nanoparticles. Contrarily, PAA and SRNOM with polydentate carboxyl ligand had strong complexation with Fe/Cr ions and Fe/Cr hydroxide nanoparticles, leading to significant amounts of PAA/SRNOM sequestered in the coprecipitates, which caused the structural disorder and fast aggregation of the coprecipitates. In comparison with that of PAA, preferential complexation of Cr ions with SRNOM resulted in higher Cr/Fe ratios in the coprecipitates. This study advances the fundamental understanding of Fe/Cr-OM coprecipitation and mechanisms controlling the composition and stability of the coprecipitates, which is essential for successful Cr remediation and removal in both natural and engineered settings.
Subject(s)
Chromium , Hydroxides , Ferric Compounds , IronABSTRACT
Ferrihydrite nanoparticles (Fh NPs) are ubiquitous in natural environments. However, their colloidal stability, and fate and transport behavior are difficult to predict in the presence of heterogeneous natural organic matter (NOM) mixtures. Here, we investigated the adsorption and aggregation behavior of Fh NPs exposed to NOM fractions with different molecular weights (MW). The NOM fraction with MW < 3 kDa destabilized the NPs, resulting in accelerated aggregation even at high C/Fe mass ratios, whereas higher MW NOM fractions imparted better colloidal stability with increasing MW and C/Fe ratio. Despite differences in the functional group composition of the bulk (dissolved) NOM fractions, all NOM fractions produced similar adsorbed layer compositions on the NPs, suggesting minimal contribution of chemical properties to the distinctive aggregation behavior. Rather, the higher adsorbed mass and larger size of the higher MW fractions were key factors in stabilizing the NPs through steric repulsion, whereas the lowest MW fraction had low adsorbed mass and was unable to counter electrostatic patch-charge attraction when the NPs are positively charged. This mechanistic understanding helps us predict the transport and fate of Fh NPs and the associated contaminants in natural environments with varying NOM compositions.
Subject(s)
Nanoparticles , Adsorption , Ferric Compounds , Humic Substances/analysis , Molecular Weight , Static ElectricityABSTRACT
To better understand the fate and transport of ferrihydrite nanoparticles (FNPs), which carry many contaminants in natural and engineered aquatic environments, the aggregation of FNPs was systematically investigated in this study. The pH isoelectric point (pHIEP), surface zeta potential, and particle size evolutions of FNPs were measured under varied aqueous conditions using dynamic light scattering (DLS). The influence of pH (5.0⯱â¯0.1 and 7.0⯱â¯0.1), ionic strength (IS), electrolytes (NaCl, CaCl2 and Na2SO4), and organics (humic acid, fulvic acid and CH3COONa) on the aggregation behaviors of FNPs were explored. Meanwhile, Derjaguin-Landau-Verwey-Overbeek (DLVO) theory was employed to better understand the controlling mechanisms of FNP aggregation. In the presence of sulfate, the surface charge of FNPs was neutralized under varied pH and ionic strength due to ion adsorption and FNPs phase transformation to schwertmannite based on FT-IR results. This phase transformation resulted in rapid aggregation in all water chemistries tested, whereas other salt species affected the aggregation primarily by ion adsorption and charge screening. Presence of increasing concentrations of the organic acids significantly shifted the pHIEP of FNPs (7.0⯱â¯0.2) to lower pH (<â¯4.0) due to adsorption of organics on FNPs surfaces making them negatively charged. The adsorption of HA/FA inhibited FNP aggregation significantly while CH3COONa did not, due to different effects on steric and/or electrosteric interactions among FNPs by organics with varied pKa values and molecular weights. After accounting for the important effects of pH, electrolytes, and organics in modifying FNPs' surface charge, DLVO calculations agreed well with measured critical coagulation concentrations (CCC) values of FNPs at both pH 5.0⯱â¯0.1 and 7.0⯱â¯0.1 in the presence of NaCl. This study will hence be useful to better predict and control the fate and transport of FNPs in the presence of electrolytes and organics with different molecular weights, as well as the fate of the associated contaminants in natural and engineered systems.
Subject(s)
Electrolytes , Ferric Compounds , Nanoparticles , Organic Chemicals , Electrolytes/chemistry , Ferric Compounds/chemistry , Hydrogen-Ion Concentration , Kinetics , Nanoparticles/chemistry , Organic Chemicals/chemistry , Spectroscopy, Fourier Transform InfraredABSTRACT
Phosphate is commonly added to drinking water to inhibit lead release from lead service lines and lead-containing materials in premise plumbing. Phosphate addition promotes the formation of lead phosphate particles, and their aggregation behaviors may affect their transport in pipes. Here, lead phosphate formation and aggregation were studied under varied aqueous conditions typical of water supply systems. Under high aqueous PO4/Pb molar ratios (>1), phosphate adsorption made the particles more negatively charged. Therefore, enhanced stability of lead phosphate particles was observed, suggesting that although addition of excess phosphate can lower the dissolved lead concentrations in tap water, it may increase concentrations of particulate lead. Adsorption of divalent cations (Ca2+ and Mg2+) onto lead phosphate particles neutralized their negative surface charges and promoted their aggregation at pH 7, indicating that phosphate addition for lead immobilization may be more efficient in harder waters. The presence of natural organic matter (NOM, ≥ 0.05 mg C/L humic acid and ≥ 0.5 mg C/L fulvic acid) retarded particle aggregation at pH 7. Consequently, removal of organic carbon during water treatment to lower the formation of disinfection-byproducts (DBPs) may have the additional benefit of minimizing the mobility of lead-containing particles. This study provided insight into fundamental mechanisms controlling lead phosphate aggregation. Such understanding is helpful to understand the observed trends of total lead in water after phosphate addition in both field and pilot-scale lead pipe studies. Also, it can help optimize lead immobilization by better controlling the water chemistry during phosphate addition.
Subject(s)
Water Pollutants, Chemical , Water Purification , Humic Substances , Lead , Water SupplyABSTRACT
Improving the colloidal stability of magnetite nanoparticles (MNPs) is essential for their successful applications. In this study, the surface zeta potential and particle size evolutions of citric acid coated magnetite nanoparticles (CA-MNPs) were measured under varied aqueous conditions using dynamic light scattering (DLS). The effects of pH (5.0-9.0), ionic strength (IS), cations (Na+ and Ca2+), anions (phosphate, sulfate, and chloride) and humic acid on the aggregation behaviors of CA-MNPs were explored. Compared with bare MNPs, the stability of CA-MNPs were greatly improved over the typical pH range of natural aquatic environments (pH = 5.0-9.0), as the coated CA-MNPs were highly negatively charged over the pH range due to the low pKa1 value (3.13) of citrate acid. CA-MNPs were more stable in the presence of monovalent cation (Na+) compared with divalent cation (Ca2+), as Ca2+ could neutralize the surface charge of MNPs more significantly than Na+. In the presence of anions, the surface charges of CA-MNPs became more negative, and the stability of CA-MNPs followed the order: in phosphate > sulfate > chloride. The observed aggregation trend could be explained by the differences in the valences of the anions and their adsorption behaviors onto CA-MNPs, which altered the surface charges of CA-MNPs. The measured critical coagulation concentrations (CCC) values of CA-MNPs in these electrolyte solutions agreed well with Derjaguin-Landau-Verwey-Overbeek (DLVO) calculations. With the addition of Humic acid (HA), the aggregation of CA-MNPs was inhibited in all electrolyte solutions even with the critical coagulation concentrations. This is due to the adsorption of HA onto CA-MNPs, which enhanced the electrostatic and steric repulsive forces between CA-MNPs. Considering the good stability of CA-MNPs in solutions with varied pH and electrolyte compositions, as well as with the easy synthesis of CA-MNPs and their non-toxicity, this study suggested CA coating as a good strategy to increase the stability of MNPs.
Subject(s)
Magnetite Nanoparticles , Nanoparticles , Cations , Citric Acid , Humic Substances , Hydrogen-Ion Concentration , Kinetics , Magnetite Nanoparticles/chemistryABSTRACT
Barium sulfate (BaSO4) is a common scale-forming mineral in natural and engineered systems, yet the rates and mechanisms of heterogeneous BaSO4 nucleation are not understood. To address these, we created idealized interfaces on which to study heterogeneous nucleation rates and mechanisms, which also are good models for organic-water interfaces: self-assembled thin films terminated with different functional groups (i.e., -COOH, -SH, or mixed -SH & COOH) coated on glass slides. BaSO4 precipitation on coatings from Barite-supersaturated solutions (saturation index, SI, = 1.1) was investigated using grazing-incidence small-angle X-ray scattering. After reaction for 1 h, a little amount of BaSO4 formed on hydrophilic bare and -COOH coated glasses. Meanwhile, BaSO4 nucleation was significantly promoted on hydrophobic -SH and mixed -SH & COOH coatings. This is because substrate hydrophobicity likely affected the interfacial energy and hence thermodynamic favorability of heterogeneous nucleation. The heterogeneous BaSO4 nucleation and growth kinetics were found to be affected by the amount of Ba(2+) adsorption onto the substrate and incipient BaSO4 nuclei. The importance of Ba(2+) adsorption was further corroborated by the finding that precipitation rate increased under [Ba(2+)]/[SO4(2-)] concentration ratios >1. These observations suggest that thermodynamic favorability for nucleation is governed by substrate-water interfacial energy, while given favorable thermodynamics, the rate is governed by ion attachment to substrates and incipient nuclei.
ABSTRACT
The formation of (Fe, Cr)(OH)3 nanoparticles determines the fate of aqueous Cr in many aquatic environments. Using small-angle X-ray scattering, precipitation rates of (Fe, Cr)(OH)3 nanoparticles in solution and on quartz were quantified from 0.1 mM Fe(III) solutions containing 0-0.25 mM Cr(III) at pH = 3.7 ± 0.2. Concentration ratio of aqueous Cr(III)/Fe(III) controlled the chemical composition (x) of (Fex, Cr1-x)(OH)3 precipitates, solutions' supersaturation with respect to precipitates, and the surface charge of quartz. Therefore, the aqueous Cr(III)/Fe(III) ratio affected homogeneous (in solution) and heterogeneous (on quartz) precipitation rates of (Fex, Cr1-x)(OH)3 through different mechanisms. The sequestration mechanisms of Cr(III) in precipitates were also investigated. In solutions with high aqueous Cr(III)/Fe(III) ratios, surface enrichment of Cr(III) on the precipitates occurred, resulting in slower particle growth in solutions. From solutions with 0-0.1 mM Cr(III), the particles on quartz grew from 2 to 4 nm within 1 h. Interestingly, from solution with 0.25 mM Cr(III), particles of two distinct sizes (2 and 6 nm) formed on quartz, and their sizes remained unchanged throughout the reaction. Our study provided new insights on homogeneous and heterogeneous precipitation of (Fex, Cr1-x)(OH)3 nanoparticles, which can help determine the fate of Cr in aquatic environments.
Subject(s)
Chromium/chemistry , Iron/chemistry , Nanoparticles/chemistry , Water Pollutants, Chemical/chemistry , Chemical Precipitation , Quartz/chemistry , Scattering, Small Angle , Solutions , Water/chemistryABSTRACT
Fe(III) hydroxide nanoparticles are an essential carrier for aqueous heavy metals. Particularly, iron hydroxide precipitation on mineral surfaces can immobilize aqueous heavy metals. Here, we used grazing-incidence small-angle X-ray scattering (GISAXS) to quantify nucleation and growth of iron hydroxide on quartz in 0.1 mM Fe(NO3)3 solution in the presence of Na(+), Cu(2+), Pb(2+), or Cr(3+) at pH = 3.7 ± 0.1. In 30 min, the average radii of gyration (R(g)) of particles on quartz grew from around 2 to 6 nm in the presence of Na(+) and Cu(2+). Interestingly, the particle sizes remained 3.3 ± 0.3 nm in the presence of Pb(2+), and few particles formed in the presence of Cr(3+). Quartz crystal microbalance dissipation (QCM-D) measurements showed that only Cr(3+) adsorbed onto quartz, while Cu(2+) and Pb(2+) did not. Cr(3+) adsorption changed the surface charge of quartz from negative to positive, thus inhibiting the precipitation of positively charged iron hydroxide on quartz. Masses and compositions of the precipitates were also quantified. This study provided new insights on interactions among quartz, iron hydroxide, and metal ions. Such information is helpful not only for environmental remediation but also for the doping design of iron oxide catalysts.
Subject(s)
Chromium/chemistry , Copper/chemistry , Ferric Compounds/chemistry , Lead/chemistry , Metals, Heavy/chemistry , Quartz , Adsorption , Hydrolysis , Particle Size , Water/chemistry , Water Pollutants, ChemicalABSTRACT
Understanding the interactions between natural organic matter (NOM) and zero-valent iron nanoparticles (nano-Fe0) and magnetite nanoparticles (nano-Fe3O4) is essential for evaluating their performance in pollutant remediation, as well as determining their fate and transport in the environment. Batch experiments were performed to investigate the sorption/desorption behaviors of humic acid (HA) on commercially available nano-Fe0 and nano-Fe3O4. The sorption/desorption of HA on nano-Fe0 and nano-Fe3O4 were well described by both the Langmuir model and the modified Langmuir model. The adsorption capacities of HA were 8.77±0.31 mg C/g and 10.05±0.95 mg C/g for nano-Fe0 and nano-Fe3O4, respectively. The interactions of HA with nano-Fe0 and nano-Fe3O4 were highly pH-dependent. On one hand, nano-Fe0 had its maximum adsorption of 11.0 mg C/g HA at pH=3, which decreased to 0.6 mg C/g when pH increased to 11.9; on the other hand, alkaline condition enhanced HA desorption greatly. At pH=10.1, after 24 h desorption experiments, nearly 80% of initially adsorbed HA desorbed from the nanoparticles. The interactions of HA with nano-Fe0 and nano-Fe3O4 were also influenced by different ion compositions in solution. Divalent cations (e.g. Ca2+, Mg2+) enhanced HA adsorption significantly, while phosphate nearly eliminated HA adsorption and promoted significantly HA desorption.
Subject(s)
Humic Substances/analysis , Iron/chemistry , Magnetite Nanoparticles/chemistry , Adsorption , Hydrogen-Ion Concentration , Osmolar ConcentrationABSTRACT
Heterogeneous coprecipitation of iron and aluminum oxides is an important process for pollutant immobilization and removal in natural and engineered aqueous environments. Here, using a synchrotron-based small-angle X-ray scattering technique, we studied heterogeneous nucleation and growth of Fe(III) (hydr)oxide on quartz under conditions found in acid mine drainage (at pH = 3.7 ± 0.2, [Fe(3+)] = 10(-4) M) with different initial aqueous Al/Fe ratios (0:1, 1:1, and 5:1). Interestingly, although the atomic ratios of Al/Fe in the newly formed Fe(III) (hydr)oxide precipitates were less than 1%, the in situ particle size and volume evolutions of the precipitates on quartz were significantly influenced by aqueous Al/Fe ratios. At the end of the 3 h experiments, with aqueous Al/Fe ratios of 0:1, 1:1, and 5:1, the average radii of gyration of particles on quartz were 5.7 ± 0.3, 4.6 ± 0.1, and 3.7 ± 0.3 nm, respectively, and the ratio of total particle volumes on quartz was 1.7:3.4:1.0. The Fe(III) (hydr)oxide precipitates were poorly crystallized, and were positively charged in all solutions. In the presence of Al(3+), Al(3+) adsorption onto quartz changed the surface charge of quartz from negative to positive, which caused the slower heterogeneous growth of Fe(III) (hydr)oxide on quartz. Furthermore, Al affected the amount of water included in the Fe(III) (hydr)oxides, which can influence their adsorption capacity. This study yielded important information usable for pollutant removal not only in natural environments, but also in engineered water treatment processes.
Subject(s)
Aluminum/chemistry , Ferric Compounds/chemistry , Quartz/chemistry , Adsorption , Chemical Precipitation , Hydrogen-Ion Concentration , Industrial Waste , Mining , Particle SizeABSTRACT
To predict the fate of aqueous pollutants, a better understanding of heterogeneous Fe(III) (hydr)oxide nucleation and growth on abundant mineral surfaces is needed. In this study, we measured in situ heterogeneous Fe(III) (hydr)oxide nucleation and growth on quartz, muscovite, and corundum (Al2O3) in 10(-4) M Fe(III) solution (in 10 mM NaNO3 at pH = 3.7 ± 0.2) using grazing incidence small-angle X-ray scattering (GISAXS). Interestingly, both the fastest heterogeneous nucleation and slowest growth occurred on corundum. To elucidate the mechanisms, zeta potential and water contact angle measurements were conducted. Electrostatic forces between the charged Fe(III) (hydr)oxide polymeric embryos and substrate surfaces-which affect local saturations near the substrate surfaces-controlled heterogeneous growth rates. Water contact angles (7.5° ± 0.7, 22.8° ± 1.7, and 44.8° ± 3.7 for quartz, muscovite, and corundum, respectively) indicate that corundum has the highest substrate-water interfacial energy. Furthermore, a comparison of structural mismatches between the substrates and precipitates indicates a lowest precipitate-substrate interfacial energy for corundum. The fastest nucleation on corundum suggests that interfacial energies in the solution-substrate-precipitate system controlled heterogeneous nucleation rates. The unique information provided here bolsters our understanding of nanoparticle-mineral surface interactions, mineral surface modification by iron oxide coating, and pollutant transport.
Subject(s)
Ferric Compounds/chemistry , Metal Nanoparticles/chemistry , Chemical Precipitation , Surface Tension , X-Ray DiffractionABSTRACT
For sustainable geologic CO(2) sequestration (GCS), a better understanding of the effects of brine cation compositions on mica dissolution, surface morphological change, and secondary mineral precipitation under saline hydrothermal conditions is needed. Batch dissolution experiments were conducted with biotite under conditions relevant to GCS sites (55-95 °C and 102 atm CO(2)). One molar NaCl, 0.4 M MgCl(2), or 0.4 M CaCl(2) solutions were used to mimic different brine compositions, and deionized water was used for comparison. Faster ion exchange reactions (Na(+)-K(+), Mg(2+)-K(+), and Ca(2+)-K(+)) occurred in these salt solutions than in water (H(+)-K(+)). The ion exchange reactions affected bump, bulge, and crack formation on the biotite basal plane, as well as the release of biotite framework ions. In these salt solutions, numerous illite fibers precipitated after reaction for only 3 h at 95 °C. Interestingly, in slow illite precipitation processes, oriented aggregation of hexagonal nanoparticles forming the fibrous illite was observed. These results provide new information for understanding scCO(2)-brine-mica interactions in saline aquifers with different brine cation compositions, which can be useful for GCS as well as other subsurface projects.
Subject(s)
Aluminum Silicates/chemistry , Carbon Dioxide/chemistry , Ferrous Compounds/chemistry , Minerals/chemistry , Salts/chemistry , Calcium/chemistry , Carbon Sequestration , Chemical Precipitation , Ion Exchange , Magnesium/chemistry , Microscopy, Atomic Force , Potassium/chemistry , Sodium/chemistry , SolubilityABSTRACT
The precipitation of carbonate minerals--mineral trapping--is considered one of the safest sequestration mechanisms ensuring long-term geologic storage of CO(2). However, little is known about the thermodynamic factors controlling the extent of heterogeneous nucleation at mineral surfaces exposed to the fluids in porous reservoirs. The goal of this study is to determine the thermodynamic factors controlling heterogeneous nucleation of carbonate minerals on pristine quartz (100) surfaces, which are assumed representative of sandstone reservoirs. To probe CaCO(3) nucleation on quartz (100) in solution and with nanoscale resolution, an in situ grazing incidence small-angle X-ray scattering technique has been utilized. With this method, a value of α' = 36 ± 5 mJ/m(2) for the effective interfacial free energy governing heterogeneous nucleation of CaCO(3) has been obtained by measuring nucleation rates at different solution supersaturations. This value is lower than the interfacial energy governing calcite homogeneous nucleation (α ≈ 120 mJ/m(2)), suggesting that heterogeneous nucleation of calcium carbonate is favored on quartz (100) at ambient pressure and temperature conditions, with nucleation barriers between 2.5% and 15% lower than those expected for homogeneous nucleation. These observations yield important quantitative parameters readily usable in reactive transport models of nucleation at the reservoir scale.
Subject(s)
Calcium Carbonate/chemistry , Carbon Dioxide/chemistry , Carbon Sequestration , Quartz/chemistry , ThermodynamicsABSTRACT
The poor colloidal stability of magnetite nanoparticles (MNPs) limits their mobility and application, so various organic coatings (OCs) were applied to MNPs. Here, a comparative study on the colloidal stability of MNPs coated with acetic (HAc) and polyacrylic acids (PAA) was conducted under varied pH (5.0-9.0) in the presence of different concentrations of cations and anions, as well as humic acid (HA). Comparing the effects of various cations and anions, the stability of both HAc/PAA-MNPs followed the order: Na+ > Ca2+and PO43- > SO42- > Cl-, which could be explained by their adsorption behaviors onto HAc/PAA-MNPs and the resulting surface charge changes. Under all conditions even with more anion adsorption onto HAc-MNPs (0.14-22.56 mg/g) than onto PAA-MNPs (0.04-18.34 mg/g), PAA-MNPs were more negatively charged than HAc-MNPs, as PAA has a lower pHIEP (2.6 ± 0.1) than that of HAc (3.7 ± 0.1). Neither the HAc nor PAA coatings were displaced by phosphate even at considerably high phosphate concentration. Compared with HAc-MNPs, the stability of PAA-MNPs was greatly improved under all studied conditions, which could be due to both stronger electrostatic and additional steric repulsion forces among PAA-MNPs. Besides, under all conditions, Derjaguin-Landau-Verwey-Overbeek (DLVO) explained well the aggregation kinetic of HAc-MNPs; while extended DLVO (EDLVO) successfully predict that of PAA-MNPs, indicating steric forces among PAA-MNPs. The aggregation of HAc/PAA-MNPs was all inhibited in varied electrolyte solutions by HA (2 mg C/L) addition. This study suggested that carboxyl coatings with higher molecular weights and pKa values could stabilize MNPs better due to stronger electrostatic and additional steric repulsion. However, in the presence of HA, these two forces were mainly controlled by adsorbed HA instead of the organic pre-coatings on MNPs.