ABSTRACT
Nitrogenase MoFe protein can be coupled with CdS nanocrystals (NCs) to enable photocatalytic N2 reduction. The nature of interactions that support complex formation is of paramount importance in intermolecular electron transfer that supports catalysis. In this work we have employed microscale thermophoresis to examine binding interactions between 3-mercaptopropionate capped CdS quantum dots (QDs) and MoFe protein over a range of QD diameters (3.4-4.3 nm). The results indicate that the interactions are largely electrostatic, with the strength of interactions similar to that observed for the physiological electron donor. In addition, the strength of interactions is sensitive to the QD diameter, and the binding interactions are significantly stronger for QDs with smaller diameters. The ability to quantitatively assess NC protein interactions in biohybrid systems supports strategies for understanding properties and reaction parameters that are important for obtaining optimal rates of catalysis in biohybrid systems.
Subject(s)
Molybdoferredoxin , Quantum Dots , Molybdoferredoxin/chemistry , Molybdoferredoxin/metabolism , Static Electricity , Nitrogenase/chemistry , Nitrogenase/metabolism , Electron TransportABSTRACT
Microscale thermophoresis (MST) is a technique used to measure the strength of molecular interactions. MST is a thermophoretic-based technique that monitors the change in fluorescence associated with the movement of fluorescent-labeled molecules in response to a temperature gradient triggered by an IR LASER. MST has advantages over other approaches for examining molecular interactions, such as isothermal titration calorimetry, nuclear magnetic resonance, biolayer interferometry, and surface plasmon resonance, requiring a small sample size that does not need to be immobilized and a high-sensitivity fluorescence detection. In addition, since the approach involves the loading of samples into capillaries that can be easily sealed, it can be adapted to analyze oxygen-sensitive samples. In this Bio-protocol, we describe the troubleshooting and optimization we have done to enable the use of MST to examine protein-protein interactions, protein-ligand interactions, and protein-nanocrystal interactions. The salient elements in the developed procedures include 1) loading and sealing capabilities in an anaerobic chamber for analysis using a NanoTemper MST located on the benchtop in air, 2) identification of the optimal reducing agents compatible with data acquisition with effective protection against trace oxygen, and 3) the optimization of data acquisition and analysis procedures. The procedures lay the groundwork to define the determinants of molecular interactions in these technically demanding systems. Key features ⢠Established procedures for loading and sealing tubes in an anaerobic chamber for subsequent analysis. ⢠Sodium dithionite (NaDT) could easily be substituted with one electron-reduced 1,1'-bis(3-sulfonatopropyl)-4,4'-bipyridinium [(SPr)2Vâ¢] to perform sensitive biophysical assays on oxygen-sensitive proteins like the MoFe protein. ⢠Established MST as an experimental tool to quantify binding affinities in novel enzyme-quantum dot biohybrid complexes that are extremely oxygen-sensitive.
ABSTRACT
Iron-sulfur proteins are ubiquitous among all living organisms and are indispensable for almost all metabolic pathways ranging from photosynthesis, respiration, nitrogen, and carbon dioxide cycles. The iron-sulfur clusters primarily serve as electron acceptors and donors and transfer electrons to active sites of various enzymes, thus driving the energy metabolism. Prokaryotes like E. coli have ISC and SUF pathways that help in the assembly and maturation of iron-sulfur proteins. These iron-sulfur proteins, especially with [4Fe-4S] clusters, are highly sensitive to molecular oxygen, and it would be advantageous if the de novo proteins and native proteins having iron-sulfur binding sites are expressed and isolated under anaerobic conditions. Bacterially assembled iron-sulfur proteins, when isolated and purified anaerobically, exhibit improved biochemical and biophysical stabilities in comparison to the counterparts expressed and purified aerobically and reconstituted under anaerobic conditions. This protocol outlines the expression and purification of the artificial protein, Coiled-Coil Iron-Sulfur (CCIS). It may be deployed to both natural and artificial [4Fe-4S] proteins when heterologously expressed in E. coli.
ABSTRACT
Iron-sulfur proteins are primordial catalysts and biological electron carriers that today drive major metabolic pathways across all forms of life. They can access a diversity of oxidation states and can mediate electron transfer over an extended range of reduction potentials spanning more than 1 V. Depending on the protein micro-environment and geometry of ligand, co-ordination the iron-sulfur clusters can occur in different forms [2Fe-2S], [3Fe-4S], HiPIP [4Fe-4S], and [4Fe-4S]. There are several spectroscopic methods available to characterize the composition and electronic configuration of the iron-sulfur clusters, such as optical methods and electron paramagnetic resonance. This paper presents the protocols used to characterize the metal center of Coiled-Coil Iron-Sulfur (CCIS), an artificial metalloprotein containing one [4Fe-4S] cluster. It is expected that these protocols will be of general utility for other iron-sulfur proteins.
ABSTRACT
In vivo expression of metalloproteins requires specific metal trafficking and incorporation machinery inside the cell. Synthetic designed metalloproteins are typically purified without the target metal, which is subsequently introduced through in vitro reconstitution. The extra step complicates protein optimization by high-throughput library screening or laboratory evolution. We demonstrate that a designed coiled-coil iron-sulfur protein (CCIS) assembles robustly with [4Fe-4S] clusters in vivo. While in vitro reconstitution produces a mixture of oligomers that depends on solution conditions, in vivo production generates a stable homotrimer coordinating a single, diamagnetic [4Fe-4S]2+ cluster. The multinuclear cluster of in vivo assembled CCIS is more resistant to degradation by molecular oxygen. Only one of the two metal coordinating half-sites is required in vivo, indicating specificity of molecular recognition in recruitment of the metal cluster. CCIS, unbiased by evolution, is a unique platform to examine iron-sulfur protein biogenesis and develop synthetic multinuclear oxidoreductases.
Subject(s)
Iron-Sulfur Proteins/metabolism , Protein Engineering/methods , Amino Acid Motifs , Circular Dichroism , Iron-Sulfur Proteins/chemistry , Iron-Sulfur Proteins/genetics , Mutagenesis , Oxidoreductases/chemistry , Oxidoreductases/genetics , Oxidoreductases/metabolism , Protein Conformation, alpha-HelicalABSTRACT
Ribosomal S6 kinases (RSKs) are the major functional components in mitogen-activated protein kinase (MAPK) pathway, and these are activated by upstream Extracellular signal-regulated kinase. Upon activation, RSKs activate a number of substrate molecules involved in transcription, translation and cell-cycle regulation. But how cellular binding partners are engaged in the MAPK pathways and regulate the molecular mechanisms have not been explored. Considering the importance of protein-protein interactions in cell signalling and folding pattern of native protein, functional C-terminal kinase domain of RSK3 has been characterized using in vitro, in silico and biophysical approaches. RSKs discharge different functions by binding to downstream kinase partners. Hence, depending upon cellular binding partners, RSKs translocate between cytoplasm and nucleus. In our study, it has been observed that the refolded C-terminal Kinase domain (CTKD) of RSK 3 has a compact domain structure which is predominantly α-helical in nature by burying the tryptophans deep into the core, which was confirmed by CD, Fluorescence spectroscopy and limited proteolysis assay. Our study also revealed that RSK 3 CTKD was found to be a homotrimer from DLS experiments. A model was also built for RSK 3 CTKD and was further validated using PROCHECK and ProSA webservers.
Subject(s)
Ribosomal Protein S6 Kinases, 90-kDa/chemistry , Circular Dichroism , Cloning, Molecular , Dynamic Light Scattering , Extracellular Signal-Regulated MAP Kinases/chemistry , Extracellular Signal-Regulated MAP Kinases/metabolism , Humans , Molecular Docking Simulation , Protein Folding , Protein Interaction Domains and Motifs , Recombinant Proteins/biosynthesis , Recombinant Proteins/chemistry , Recombinant Proteins/isolation & purification , Ribosomal Protein S6 Kinases, 90-kDa/genetics , Ribosomal Protein S6 Kinases, 90-kDa/metabolism , Signal Transduction , Spectrometry, FluorescenceABSTRACT
Signaling through c-Raf downstream pathways is the crucial subject of extensive studies because over expressed or mutated genes in this pathway lead to a variety of human cancers. On the basis of cellular localization, this pathway has been sub-divided into two cascades. The first RAF1-MEK1-ERK2 cascade which remains in the cytosol, whereas the second MEK1-ERK2-RSKs transduces into the nucleus and regulates the transactivation function. But how a few amino acids critically regulate the transcriptional function remains unclear. In this paper, we have performed in silico studies to unravel how atomic complexities at the MEK1-ERK2-RSKs pathways intercedes different functional responses. The secondary structure of the ERK, RSKs have been modeled using Jpred3, PSI-PHRED, protein modeler, and Integrated sequence analyzer from Discovery Studio software. Peptides of RSKs isozymes (RSK1/2/3/4) were built and docked on ERK2 structure using ZDOCK module. The hydropathy index for the RSKs molecules was determined using the KYTE-DOOLITTLE plot. The simulations of complex molecules were carried out using a CHARMM force field. The protein-protein interactions (PPIs) in different cascade of MAP kinase (MAPK) have been shown to be similar to those predicted in vivo. PPIs elucidate that the amino acids located at the conserved domains of MAPK pathways are responsible for transactivation functions.