ABSTRACT
In this study, metal-containing nanoparticles (NPs) were produced using electrical explosion of wires (EEW) in organic solvents. The explosion chamber was constructed from Teflon to withstand the shockwave, allow growth and reaction of the incipient NPs in various organic solvents containing dissolved ligands, and allow a constant flow of argon to maintain an inert environment. A survey of different transition d-block metals was conducted with metals from groups 4-8, affording metal carbide NPs, while metals from groups 9-12 gave elemental metallic NPs. Tungsten carbide phase WC1-x, which has not been previously isolated as a single-phase material, was exclusively formed during EEW. We used polymerization initiation by electron-rich metallic nanoparticles (PIERMEN) as a capping technique for the nascent NPs with an alkyl epoxide employed as the monomers. Transmission electron microscopy showed spherical particles with the metallic core embedded in a polymer matrix with predominantly smaller particles (<50 nm), but also a broad size distribution with some larger particles (>100 nm). Powder X-ray diffraction (PXRD) was used to confirm the identity of the metallic NPs. The capping agents were characterized using ATR-FTIR spectroscopy. No evidence is observed for the formation of crystalline oxides during EEW for any metals used. Differential scanning calorimetry/thermal gravimetric analysis was used to study the NP's behavior upon heating under an air flow up to 800 °C with the product oxides characterized by PXRD. The bifurcation between metal-carbide NPs and metal NPs correlates with the enthalpy of formation of the product carbides. We observed PIERMEN capping of elemental metal NPs only when the metal has negative standard electrode potentials (relative to a bis(biphenyl) chromium(I)/(0) reference electrode).
ABSTRACT
Microcomputed tomography is an important technique for distinguishing the vascular network from tissues with similar X-ray attenuation. Here, we describe a composite of barium sulfate (BaSO4) nanoparticles, calcium carbonate (CaCO3) nanoparticles, and alginate that provides improved performance over microscale BaSO4 particles, which are currently used clinically as X-ray contrast agents. BaSO4 and CaCO3 nanoparticles were synthesized using a polyol method with tetraethylene glycol as solvent and capping agent. The nanoparticles show good colloidal stability in aqueous solutions. A deliverable nanocomposite gel contrast agent was produced by encapsulation of the BaSO4 and CaCO3 nanoparticles in an alginate gel matrix. The gelation time was controlled by addition of d-(+)-gluconic acid δ-lactone, which controls the rate of dissolution of the CaCO3 nanoparticles that produce Ca2+ which cross-links the gel. Rapid cross-linking of the gel by Ba2+ was minimized by producing BaSO4 nanoparticles with an excess of surface sulfate. The resulting BaSO4-CaCO3 nanoparticle alginate gel mechanical properties were characterized, including the gel storage modulus, peak stress and elastic modulus, and radiodensity. The resulting nanocomposite has good viscosity control and good final gel stiffness. The nanocomposite has gelation times between 30 and 35 min, adequate for full body perfusion. This is the first nanoscale composite of a radiopaque metal salt to be developed in combination with an alginate hydrogel and designed for medical perfusion and vascular imaging applications.
ABSTRACT
We report here on the polymerization of epoxide monomers on incipient aluminum nanoparticle cores and the effects of changing the epoxide-capping precursor and the metallic monomer ratio on the resultant stability and particle size of passivated and capped aluminum nanoparticles. When altering the ratio of aluminum to cap monomer precursor, nanoparticles capped with epoxydodecane, epoxyhexane, and epoxyisobutane show a clear decreasing trend in stability with decreasing alkane substituent length. The nanoparticle core size was unaffected by cap ratio or composition. PXRD (powder X-ray diffraction) and DSC/TGA (differential scanning calorimetry/thermal gravimetric analysis) confirm the presence of successfully passivated face-centered cubic (fcc) aluminum nanoparticles. We also report preliminary results from ATR-FTIR (attenuated total reflectance-Fourier transform infrared), (13)C CPMAS (cross-polarization/magic-angle spinning), and (27)Al MAS solid-state NMR (nuclear magnetic resonance) measurements. The most stable aluminum nanoparticle-polyether core-shell nanoparticles are found at an Al:monomer mole ratio of 10:1 with an active Al(0) content of 94%.
ABSTRACT
The treatment of brain malignancies with boron neutron capture therapy depends on their ability to cross the blood-brain barrier (BBB). An especially promising class of boron-containing compounds is the rhenacarboranes that, if able to cross the BBB, could act as delivery vehicles as well as a source of boron. Here, we examined the ability of the 3-NO-3,3-kappa(2)-(2,2'-N(2)C(10)H(6)(Me)[(CH(2))(7)(131)I]-4,4')-closo-3,1,2-ReC(2)B(9)H(11) (rhenacarborane) labeled with iodine-131 to be taken up into the bloodstream after subcutaneous administration and to cross the BBB. The (131)I-rhenacarborane was quickly absorbed from the injection site and reached a steady state in arterial serum of 2.59%/ml of the administered dose. Between 73 and 95% of the radioactivity in serum 6 h after administration represented intact (131)I-rhenacarborane. Its octanol/buffer partition coefficient was 1.74, showing it to be lipophilic. Tissue/serum ratios for brain, lung, and liver showed classic patterns for a lipid-soluble substance with high levels immediately achieved and rapid redistribution. For brain, a steady state of approximately 0.107% of the administered dose/gram-brain was rapidly reached, and 71% of the radioactivity in brain 6 h after subcutaneous administration represented intact (131)I-rhenacarborane. Steady-state values were 1.53 and 0.89% of the injected dose per gram for lung and liver, respectively. (131)I-Rhenacarborane was quickly effluxed from brain by a nonsaturable system after its injection into the lateral ventricle of the brain. In conclusion, these results show that a rhenacarborane was enzymatically resistant and able to cross the BBB by transmembrane diffusion and accumulate in brain in substantial amounts. This supports their use as therapeutic agents for targeting the central nervous system.
Subject(s)
Antineoplastic Agents/pharmacokinetics , Blood-Brain Barrier/metabolism , Boron Compounds/pharmacokinetics , Organometallic Compounds/pharmacokinetics , Rhenium/chemistry , Animals , Antineoplastic Agents/administration & dosage , Antineoplastic Agents/blood , Antineoplastic Agents/therapeutic use , Boron Compounds/administration & dosage , Boron Compounds/blood , Boron Compounds/therapeutic use , Boron Neutron Capture Therapy/methods , Brain Neoplasms/drug therapy , Brain Neoplasms/metabolism , Injections, Subcutaneous , Male , Mice , Mice, Inbred Strains , Organometallic Compounds/administration & dosage , Organometallic Compounds/blood , Organometallic Compounds/therapeutic use , PermeabilityABSTRACT
We present an investigation of the photochemistry of aluminum nanoparticles (Al NPs) capped with poly(methyl methacrylate) (PMMA). Powder X-ray diffraction and Fourier transform infrared spectroscopy with total attenuated reflection confirm the presence of crystalline aluminum cores and the PMMA cap and allow us to confirm the latter's photodegradation upon exposure to UV light. The PMMA-Al NPs were also characterized by differential scanning calorimetry coupled with thermogravimetric analysis to study the thermal profiles for polymer combustion and metal oxidation exotherms. Transmission electron microscopy confirms that the Al NPs, around 36 nm in diameter, are embedded in the PMMA matrix. Following UV irradiation, the PMMA-Al NPs react considerably faster with alkaline solutions, compared with unphotolyzed samples. Photoactivation of the nanocomposite induces partial decomposition of the PMMA capping layer, exposing the underlying reactive metal cores to the surrounding environment and accelerating its redox reactivity. Photolysis times of 1, 6, 24, and 52 h were investigated to establish a minimum UV exposure time for the activation of the PMMA-Al NPs toward hydrolytic hydrogen gas generation.
ABSTRACT
The compounds [Co(2)(CO)(8)] and nido-7,8-C(2)B(9)H(13) react in CH(2)Cl(2) to give a complex mixture of products consisting primarily of two isomers of the dicobalt species [Co(2)(CO)(2)(eta(5)-7,8-C(2)B(9)H(11))(2)] (1), together with small amounts of a mononuclear cobalt compound [Co(CO)(2)(eta(5)-10-CO-7,8-C(2)B(9)H(10))] (5) and a charge-compensated carborane nido-9-CO-7,8-C(2)B(9)H(11) (6). In solution, isomers 1a and 1b slowly equilibrate. However, column chromatography allows a clean separation of 1a from the mixture, and a single-crystal X-ray diffraction study revealed that each metal atom is ligated by a terminal CO molecule and in a pentahapto manner by a nido-C(2)B(9)H(11) cage framework. The two Co(CO)(eta(5)-7,8-C(2)B(9)H(11)) units are linked by a Co-Co bond [2.503(2) Å], which is supported by two three-center two-electron B-H right harpoon-up Co bonds. The latter employ B-H vertices in each cage which lie in alpha-sites with respect to the carbons in the CCBBB rings bonded to cobalt. Addition of PMe(2)Ph to a CH(2)Cl(2) solution of a mixture of the isomers 1, enriched in 1b, gave isomers of formulation [Co(2)(CO)(PMe(2)Ph)(eta(5)-7,8-C(2)B(9)H(11))(2)] (2). Crystals of one isomer were suitable for X-ray diffraction. The molecule 2a has a structure similar to that of 1a but differs in that whereas one B-H right harpoon-up Co bridge involves a boron atom in an alpha-site of a CCBBB ring coordinated to cobalt, the other uses a boron atom in the beta-site. Reaction between 1b and an excess of PMe(2)Ph in CH(2)Cl(2) gave the complex [CoCl(PMe(2)Ph)(2)(eta(5)-7,8-C(2)B(9)H(11))] (3), the structure of which was established by X-ray diffraction. Experiments indicated that 3 was formed through a paramagnetic Co(II) species of formulation [Co(PMe(2)Ph)(2)(eta(5)-7,8-C(2)B(9)H(11))]. Addition of 2 molar equiv of CNBu(t) to solutions of either 1a or 1b gave a mixture of two isomers of the complex [Co(2)(CNBu(t))(2)(eta(5)-7,8-C(2)B(9)H(11))(2)] (4). NMR data for the new compounds are reported and discussed.
ABSTRACT
We describe here the first report of a metallacarborane complex as a redox mediator in a functioning biofuel cell. Specifically, we have prepared a water-soluble salt of the complex anion [commo-3,3'-Fe-(closo-2,1-C(2)B(9)H(11))(2)](-) and employed it as a redox mediator for glucose oxidation using chitosan/multiwalled carbon nanotube-modified electrodes comprising immobilized glucose oxidase. Experiments have indicated an increased amperometric response to glucose feeding, providing the complex mediator was initially supplied in the phosphate buffer electrolyte solution. Cathodic peak currents increased to a maximum of 1.24mA/cm(2) up to the saturating threshold concentration of glucose, indicating a significant degree of metallacarborane-enzyme communication and supporting the notion of a proposed metallacarborane redox mediator in biofuel cells. Upon incorporation of the mediator by anion exchange in the chitosan with the enzyme prior to measurement, however, an attenuated response to glucose feeding was detected, despite efforts to use different tactics to cast such films on the electrode such as a bilayer scheme. It is believed that the uptake of significant quantities of the metallacarborane into the chitosan is sponsoring a gross change in the microstructure of the biopolymer. This is supported by SEM imaging of the metallacarborane-modified chitosan, which revealed a remarkable transformation of the biopolymer scaffold.
Subject(s)
Bioelectric Energy Sources , Boron Compounds/chemistry , Chitosan/chemistry , Enzymes, Immobilized/chemistry , Glucose Oxidase/chemistry , Aspergillus niger/enzymology , Electrochemistry , Electrodes , Enzymes, Immobilized/metabolism , Glucose Oxidase/metabolism , Microscopy, Electron, Scanning , Models, Molecular , Molecular Conformation , Oxidation-ReductionABSTRACT
We report here on the synthesis and passivation of small (20-30 nm) aluminum nanoparticles using alkyl-substituted epoxides as capping agents. FTIR and 13C NMR spectroscopy indicate that the epoxides polymerize to form a polyether cap on the surfaces of the aluminum nanoparticles. Nanoparticles capped with epoxyhexane and epoxydodecane are stable in air, but particles capped with epoxyisobutane are pyrophoric. TEM images show spherical Al particles. Powder X-ray diffraction shows the presence of crystalline Al. Titrimetric analysis of the core-shell nanostructures in air reveals that 96% of the total aluminum present is active (unoxidized) aluminum.
ABSTRACT
A synthetic methodology using double carbonyl substitution of the starting tricarbonyl complex [3,3,3-(CO)(3)-closo-3,1,2-RuC(2)B(9)H(11)] (1) with 2 mol equiv of the reagent Me(3)NO has been employed to afford ruthenacarborane complexes with chelating N-donor ligands. Three of these complexes, [3-CO-3,3-[kappa(2)-4,4'-R(2)-2,2'-(NC(5)H(3))(2)]-closo-3,1,2-RuC(2)B(9)H(11)] (3a, R = H; 3b, R = (CH(2))(8)Me; 3c, R = Bu(t)), comprise 2,2'-bipyridyl ligands with hydrogen, n-nonyl, or t-butyl groups in the 4,4'-positions of the rings, respectively. Photophysical analysis revealed no substantial luminescent activity, but the complexes are electrochemically active, undergoing sequential (reversible and quasi-reversible) one-electron reductions, the second of which likely precipitating a ligand displacement. Cyclic voltammetry (CV) experiments revealed an irreversible one-electron oxidation (E(pa) approximately 0.9 V) in MeCN, on the other hand, followed by rapid CO substitution by the solvent and reversible secondary reduction (E(1/2) approximately 0.1 V). The primary redox couple became quasi-reversible in CH(2)Cl(2), and spectroelectrochemical analysis of complex 3c provided evidence of a closo --> isocloso structural modification upon oxidation. An analogue of these complexes employing the TMEDA (N,N,N',N'-tetramethylethylenediamine) ligand, [3-CO-3,3-[kappa(2)-Me(2)N(CH(2))(2)NMe(2)]-closo-3,1,2-RuC(2)B(9)H(11)] (4), was synthesized using the same methodology. Cyclic voltammetric measurements displayed a reversible metal-based one-electron oxidation whether in CH(2)Cl(2) or MeCN, with no indication of subsequent CO substitution or a similar closo --> isocloso adjustment. Complex 4 was unexpectedly weakly luminescent (lambda(em) = 360 nm) in THF (tetrahydrofuran) at ambient temperatures, demonstrating a more intense phosphorescent emission in MeTHF (2-methyltetrahydrofuran) glass at 77 K (lambda(em) = 450 nm, tau(450) = 0.77 ms). The X-ray crystallographic structures of complexes 3a and 4 are reported along with spectroscopic IR, NMR ((1)H, (13)C, (11)B), UV-vis absorption, EPR, and CV data.
ABSTRACT
The complex [7,10-mu-H-7-CO-7,7-(PPh3)2-isonido-7,8,9-ReC2B7H9] has been synthesized by treatment of the complex salt [NHMe3][3,3-Cl2-3,3-(CO)2-closo-3,1,2-ReC2B9H11] with PPh3 in refluxing THF (tetrahydrofuran) and isolated as intensely colored orange-red microcrystals. Spectroscopic NMR and IR data have suggested that the product has a highly asymmetric structure with two inequivalent PPh3 ligands and a single CO ligand. Measurement of 11B NMR spectra in particular have indicated seven distinct boron vertexes, although the resulting cage degradation by removal of two BH vertexes was confirmed only following X-ray crystallographic analysis, which revealed the pentadecahedral isonido-7,8,9-ReC2B7 architecture. The 11B NMR resonances span an enormous chemical shift range (Deltadelta = 113), and this appears to be a direct consequence of the deshielding of the boron vertex directly opposite the quadrilateral |ReCCB| aperture. The new complex has been shown by electrochemical measurements to undergo a reversible one-electron oxidation. Digitally simulated cyclic voltammograms support a proposed square scheme (E(1/2) = 0.58, 0.69 V vs ferrocene) involving a reversible isonido-closo transition of the metallacarborane cage. Most unusually for a metallacarborane complex, ambient temperature solutions in CH2Cl2 and DMF have been shown to be intensely turquoise-blue fluorescent (lambda(em) = 442 nm, Phi = 0.012). Fluorescence spectroscopy measurements in MeTHF (2-methyltetrahydrofuran) glass at 77 K have indicated that the likely cause of such a broad emission is dual fluorescence (lambda(em) = 404, 505 nm), with both emissions displaying vibronic structure. Following excited-state lifetime decay analysis, the emissive behavior has been accredited to metal-perturbed 1IL states, with the lower energy emission arising from a slight geometric distortion of the initially excited complex.