Customized Modification of Welan Gum Properties Through Controllable Grafting of Acrylamide.

Welan gum (WG) has a wide range of applications, but it is not yet suitable for applications such as oil recovery profile control that have complex requirements for viscosity, gelation properties, and so forth. Grafting modification is an important strategy for improving the property of WG, but there are few reports on controllable modification of WG to customize it for specific application. Acrylamide (AM) dosage was identified as the key factor affecting the grafting ratio of AM onto WG by a uniform experimental design. The grafting ratio can be directly adjusted between 99% and 378% based on the positive correlation with dosage of AM, and viscosity can be adjusted between 206 and 327 mPa s based on the negative correlation with grafting ratio. The 50% weight loss temperature of W11 with a grafting ratio of 110% raised from 314 to 336°C after grafting. The viscosity of the hydrogel formed with WG11 reached 15,654 mPa s, nearly nine times higher than that of unmodified WG. In addition, the gelation time can be controlled within 5 days, so that it can be injected to the optimal area in oilfield profile, avoiding pipeline blockage. This study enables adjusting viscosity of WG grafted with AM by controlling the grafting rate, and enhances gelation performance and thermal stability of WG, which will expand the application of WG in oil recovery and other fields.

Effects of different culture salinities on the growth and muscle quality of grass carp (Ctenopharyngodon idellus).

Grass carp (Ctenopharyngodon idellus) is an economically important farmed fish. This experiment was conducted to study the effects of different culture salinities on the growth and muscle quality of grass carp. We found that salinity of 0 - 5 had no significant effect on the growth of grass carp, but it significantly decreased at salinities above 5. Compared to salinity 0, the protein content of serum was significantly higher at salinities of 3 and 5. However, all serum biochemical compound measured, except glucose and total protein, decreased significantly at salinity 9. Muscle textural properties of grass carp were significantly higher at salinities of 3 and 5 than at 0, 7, and 9. Salinities of 0 - 3 had no significant effect on muscle nutrition of grass carp, but this parameter tended to decrease at salinities above 7. Salinities of 3 and 5 significantly favored muscle growth and expression of collagen-related genes, whereas the opposite was true for salinities of 7 and 9. These results indicated that grass carp grew normally at salinities of 3 and 5, with some improvement in muscle quality, whereas salinities of 7 and 9 had a negative effect on growth and quality. Therefore, appropriate salinity levels can help to improve the muscle quality of grass carp without affecting their growth.

Properties of Skin Collagen from Southern Catfish (Silurus meridionalis) Fed with Raw and Cooked Food.

The southern catfish (Silurus meridionalis) is an economically important carnivorous freshwater fish in China. In this study, we compared the properties of skin collagen from southern catfish fed with raw food (RF) and cooked food (CF). The skin collagen yield in the RF group (8.66 ± 0.11%) was significantly higher than that of the CF group (8.00 ± 0.27%). SDS-PAGE, circular dichroism spectroscopy, and FTIR analyses revealed that the collagen extracted from southern catfish skin in both groups was type I collagen, with a unique triple helix structure and high purity. The thermal denaturation temperature of collagen in the RF group (35.20 ± 0.11 °C) was significantly higher than that of the CF group (34.51 ± 0.25 °C). The DPPH free radical scavenging rates were 68.30 ± 2.41% in the RF collagen and 61.78 ± 3.91% in the CF collagen, which was higher than that found in most fish collagen. Both the RF and CF groups had high ability to form fibrils in vitro. Under the same conditions, the CF group exhibited faster fibril formation and a thicker fibril diameter (p < 0.05). In addition, the RF group exhibited significantly higher expression of col1a1 compared to the CF group. These results indicated that feeding southern catfish raw food contributed to collagen production, and the collagen from these fish may have potential in biomaterial applications.

Rational modification of xanthan gum based on assistance of molecular dynamics simulation.

Graft copolymerization is an effective approach to improve performance of polysaccharide. However, selecting the most suitable modification strategy can be challenging due to the intricate molecular structure. Rational design through computer aided molecular dynamics (MD) simulations requires substantial computational resources. This study designed a simplified MD simulation strategy and suggested that grafting acrylamide (AM) could effectively adjust the molecular conformation of xanthan gum (XG) and its derivatives, thus regulating its viscosity and gelation properties. To rationally modify XG, a uniform experimental design was applied to tune the grafting ratios ranging from 72 % to 360 %, resulting in XG-AM solutions with viscosity ranging from 9 to 104 mPa•s at a concentration of 0.3 %. XG-AM was crosslinked by acid phenolic resin to generate gel with the viscosity of 7890 mPa·s in 3 days, which was 13 times the viscosity of unmodified XG. The controllable gelation will enhance the efficacy of XG-AM in oil recovery. By integrating rational selection of grafting strategies based on simplified MD simulation of polysaccharide derivatives and controllable grafting modification with specified grafting rates, customized production of polysaccharide derivatives can meet the requirements of a diverse range of applications.

Design of novel temperature-resistant and salt-tolerant acrylamide-based copolymers by aqueous dispersion polymerization.

Development of polymer-based flooding technology to improve oil recovery efficiency, water dispersion copolymerization of acrylamide, cationic monomer methacryloxyethyltrimethyl ammonium chloride (METAC), and anionic monomer acrylic acid (AA) were carried out in aqueous ammonium sulfate solution with polyvinyl pyrrolidone (PVP) as the stabilizer. The copolymers were characterized by 1H-NMR, FT-IR, TG, and SEM to confirm that they were prepared successfully and exhibited excellent salt-resistant property. Moreover, the effect of the aqueous solution of ammonium sulfate (AS) concentration, stabilizer concentration, and initiator concentration on the viscosity and size were systematically investigated. To further improve the thermal endurance properties of copolymer, hydrophobic monomers with different alkyl chain lengths were added to the above system. The acrylamide-based quadripolymer possessed prominent thermal and salt endurance properties by utilizing the advantages of zwitterionic structure and hydrophobic monomer. With the temperature rising, the viscosity retention could reach 70.2% in the water and 63.8% in the saline. This work had expected to provide a new strategy to design polymers with excellent salinity tolerance and thermal-resistance performances.