ABSTRACT
A lipolytic enzyme (Rcut) was discovered from the Rhodococcusstrain (RosL12) isolated from the Antarctic Ross Sea. The corresponding gene composed of 651 bases encoding 216 amino acids. It was found to be a cutinase gene through BLAST search. Rcut has a signal sequence consisting of 29 amino acids. An active Rcut was produced after the intact gene containing the signal sequence was transformed into Escherichia coli Rosetta-gami™ 2 (DE3) pLysS. Rcut was purified through a nickel-nitrilotriacetic acid purification system and a carboxymethyl Sepharose column chromatography. Its specific activity was 2190 U/mg. Rcut showed the highest activity at 40 °C and had a low activation energy of 3.16 kcal/mol. This means that it is a typical cold-adapted enzyme. Rcut showed high activity towards medium chain fatty acids (C4-C10). Rcut degraded polycaprolactone and polyethylene terephthalate, suggesting that it could be used for decomposition of synthetic plastics causing environmental pollution. Rcut was immobilized on methacrylate-divinyl benzene bead. This immobilized Rcut (immRcut) showed higher thermal stability than the free enzyme. ImmRcut performed transesterification of various esters and ethanol in a non-polar solvent, suggesting that it could be used for the synthesis of industrially useful ester compounds.
Subject(s)
Rhodococcus , Amino Acids , Antarctic Regions , Carboxylic Ester Hydrolases , Enzyme Stability , Esters , Hydrogen-Ion Concentration , Protein Sorting Signals , Rhodococcus/genetics , Substrate Specificity , TemperatureABSTRACT
Lipases are used to synthesize a variety of industrially useful compounds. Among them, psychrophilic lipase can be used to synthesize thermo-labile compounds at low temperatures. In this study, random mutagenesis was introduced into Antarctic Croceibacter atlanticus lipase gene using error-prone PCR, resulting in changes in its protein sequence. Through two rounds of mutagenesis and screening, we found that a mutant R1 showed an enhanced activity at low temperatures. Mutant R1 had five mutations (F43L, S48G, S49G, D141K, and K297R) and higher kcat/KM value than the wild type (WT) at 10 °C. We immobilized this enzyme on methacrylate divinylbenzene resin and used it to synthesize octyl butyrate, a flavor compound. The esterification reaction proceeded even at 10 °C. Mutant R1 synthesized the ester compound faster than the WT. To determine which amino acids were responsible for the increase of activity, site-directed mutagenesis was performed to introduce five back mutations into mutant R1. Three back mutants (L43F, G48S, G49S) showed significant decreases of activity at low temperatures, indicating that these amino acids were closely related to the increase in activity. This psychrophilic mutant R1 is expected to be used in low-temperature enzyme conversion reactions in the food industry.
Subject(s)
Butyrates , Lipase , Lipase/metabolism , Butyrates/metabolism , Evolution, Molecular , Amino Acids/genetics , Enzyme StabilityABSTRACT
Vanillyl alcohol (VA) possesses potent antioxidant activity, yet its applicability is hindered by its limited solubility in emulsions or non-polar organic solvents. Conversely, long-chain polyunsaturated fatty acids exhibit antibacterial properties. The combination of these compounds offers the prospect of developing novel phenolic lipid compounds with dual antioxidant and antibacterial activities, alongside enhanced solubility capabilities. In this investigation, linolenic acid vanillyl ester (LAVE) was synthesized from VA and linseed oil (LO) through a transesterification reaction employing immobilized lipase. Optimization of LAVE production was achieved by varying reaction temperature, substrate concentration, and reaction time. LAVE demonstrated efficacy in scavenging both 2,2-diphenyl-1-picryhydrazyl and 2,2'-azino-bis (3-ethylbenthiazoline-6-sulphonic acid) radicals in organic solvents. Antioxidant testing via lipid oxidation analysis revealed that LAVE, when distributed within emulsions, effectively impeded the formation of conjugated dienes and conjugated trienes. Furthermore, LAVE exhibited antibacterial activity against four strains of spoilage bacteria: Bacillus subtilis, Bacillus coagulans, Pseudomonas fluorescens, and Alcaligenes faecalis. Zeta potential analysis substantiated the binding of LAVE to the bacterial cell surface. Propidium iodide uptake assay and fluorescence microscopy further elucidated that LAVE induces cell lysis by augmenting membrane permeability.
ABSTRACT
Isoamyl fatty acid esters (IAFEs) are widely used as fruity flavor compounds in the food industry. In this study, various IAFEs were synthesized from isoamyl alcohol and various fatty acids using a cutinase enzyme (Rcut) derived from Rhodococcus bacteria. Rcut was immobilized on methacrylate divinylbenzene beads and used to synthesize isoamyl acetate, butyrate, hexanoate, octanoate, and decanoate. Among them, Rcut synthesized isoamyl butyrate (IAB) most efficiently. Docking model studies showed that butyric acid was the most suitable substrate in terms of binding energy and distance from the active site serine (Ser114) γ-oxygen. Up to 250 mM of IAB was synthesized by adjusting reaction conditions such as substrate concentration, reaction temperature, and reaction time. When the enzyme reaction was performed by reusing the immobilized enzyme, the enzyme activity was maintained at least six times. These results demonstrate that the immobilized Rcut enzyme can be used in the food industry to synthesize a variety of fruity flavor compounds, including IAB.
Subject(s)
Carboxylic Ester Hydrolases , Enzymes, Immobilized , Flavoring Agents , Molecular Docking Simulation , Rhodococcus , Enzymes, Immobilized/metabolism , Enzymes, Immobilized/chemistry , Rhodococcus/enzymology , Rhodococcus/metabolism , Flavoring Agents/metabolism , Flavoring Agents/chemistry , Carboxylic Ester Hydrolases/metabolism , Carboxylic Ester Hydrolases/chemistry , Esters/metabolism , Esters/chemistry , Pentanols/metabolism , Pentanols/chemistry , Fatty Acids/metabolism , Fatty Acids/chemistry , Bacterial Proteins/metabolism , Bacterial Proteins/genetics , Bacterial Proteins/chemistry , Temperature , Substrate Specificity , Butyric Acid/metabolism , Butyric Acid/chemistry , Catalytic DomainABSTRACT
Ergosterol (Ergo) and cholesterol contribute to performances of liposomes by increasing membrane packing density and physical stability. However, as these sterols can reduce membrane flexibility, they can lower skin permeability of liposomes. We synthesized ergosterol ester (Ergo-Est) containing unsaturated fatty acid different from Ergo in size and physical properties. In this work, we investigated effects of Ergo-Est and Ergo on physical properties of liposomes. We incorporated Ergo, Ergo-oleate (EO18:1), Ergo-linoleate (EL18:2), and Ergo-linolenate (ELn18:3) into the liposomal membrane of egg phosphatidylcholine and soybean lecithin. Ergo-Est did not reduce membrane fluidity as much as Ergo. Nevertheless, Ergo-Est increased membrane packing density and physical stability of liposomes. EL18:2 and ELn18:3 almost maintained membrane flexibility and skin permeability of liposomes, while Ergo significantly reduced them. Skin permeation test demonstrated that EL18:2 and ELn18:3 liposomes permeated to the dermis, whereas Ergo liposome mostly remained in the stratum corneum. This is the first report to show that EL18:2 and ELn18:3 can be efficient sterol compounds for flexible liposome formulation.
Subject(s)
Ergosterol , Liposomes , Skin , Sterols , Lecithins , Fatty Acids, UnsaturatedABSTRACT
Alkyl butyrate with fruity flavor is known as an important additive in the food industry. We synthesized various alkyl butyrates from various fatty alcohol and butyric acid using immobilized Rhodococcus cutinase (Rcut). Esterification reaction was performed in a non-aqueous system including heptane, isooctane, hexane, and cyclohexane. As a result of performing the alkyl butyrate synthesis reaction using alcohols of various chain lengths, it was found that the preference for the alcohol substrate had the following order: C6 > C4 > C8 > C10 > C2. Through molecular docking analysis, it was found that the greater the hydrophobicity of alcohol, the higher the accessibility to the active site of the enzyme. However, since the number of torsions increased as the chain length increased, it became difficult for the hydroxyl oxygen of the alcohol to access the γO of serine at the enzyme active site. These molecular docking results were consistent with substrate preference results of the Rcut enzyme. The Rcut maintained the synthesis efficiency at least for 5 days in isooctane solvent. We synthesized as much as 452 mM butyl butyrate by adding 100 mM substrate daily for 5 days and performing the reaction. These results show that Rcut is an efficient enzyme for producing alkyl butyrate used in the food industry.
Subject(s)
Butyrates , Octanes , Esterification , Molecular Docking Simulation , Substrate Specificity , Butyrates/chemistry , Butyric Acid , Alcohols , Enzymes, Immobilized/metabolismABSTRACT
BACKGROUND: Lipases have emerged as essential biocatalysts, having the ability to contribute to a wide range of industrial applications. Microbial lipases have garnered significant industrial attention due to their stability, selectivity, and broad substrate specificity. In the previous study, a unique lipolytic bacterium (Micrococcus luteus EMP48-D) was isolated from tempeh. It turns out the bacteria produce an acidic lipase, which is important in biodiesel production. Our main objectives were to clone the acidic lipase and investigate its potential in biodiesel production. RESULT: In this study, the gene encoding a lipase from M. luteus EMP48-D was cloned and expressed heterologously in Escherichia coli. To our knowledge, this is the first attempt at the cloning and expression of the lipase gene from Micrococcus luteus. The amino acid sequence was deduced from the nucleotide sequence (1356 bp) corresponded to a protein of 451 amino acid residues with a molecular weight of about 40 kDa. The presence of a signal peptide suggested that the protein was extracellular. A sequence analysis revealed that the protein had a lipase-specific Gly-X-Ser-X-Gly motif. The enzyme was identified as an acidic lipase with a pH preference of 5.0. Fatty acid preferences for enzyme activities were C8 and C12 (p-nitrophenyl esters), with optimum temperatures at 30-40 °C and still remaining active at 80°C. The enzyme was also shown to convert up to 70% of the substrate into fatty acid methyl ester. CONCLUSION: The enzyme was a novel acidic lipase that demonstrated both hydrolytic and transesterification reactions. It appeared particularly promising for the synthesis of biodiesel as this enzyme's catalytic reaction was optimum at low temperatures and was still active at high temperatures.
ABSTRACT
Microbial lipases are used widely in the synthesis of various compounds due to their substrate specificity and position specificity. 4-Ethyl malate (4-EM) made from diethyl malate (DEM) is an important starting material used to make argon fluoride (ArF) photoresist. We tested several microbial lipases and found that Photobacterium lipolyticum M37 lipase position-specifically hydrolyzed DEM to produce 4-EM. We purified the reaction product through silica gel chromatography and confirmed that it was 4-EM through nuclear magnetic resonance analysis. To mass-produce 4-EM, DEM hydrolysis reaction was performed using an enzyme reactor system that could automatically control the temperature and pH. Effects of temperature and pH on the reaction process were investigated. As a result, 50°C and pH 4.0 were confirmed as optimal reaction conditions, meaning that M37 was specifically an acid lipase. When the substrate concentration was increased to 6% corresponding to 0.32 M, the reaction yield reached almost 100%. When the substrate concentration was further increased to 12%, the reaction yield was 81%. This enzyme reactor system and position-specific M37 lipase can be used to mass-produce 4-EM, which is required to synthesize ArF photoresist.
Subject(s)
Lipase , Malates , Hydrogen-Ion Concentration , Hydrolysis , Lipase/metabolism , Photobacterium/metabolism , Substrate Specificity , TemperatureABSTRACT
Ethyl (S)-4-chloro-3-hydroxy butanoate (ECHB) is a building block for the synthesis of hypercholesterolemia drugs. In this study, various microbial reductases have been cloned and expressed in Escherichia coli. Their reductase activities toward ethyl-4-chloro oxobutanoate (ECOB) have been assayed. Amidst them, Baker's yeast YDL124W, YOR120W, and YOL151W reductases showed high activities. YDL124W produced (S)-ECHB exclusively, whereas YOR120W and YOL151W made (R)-form alcohol. The homology models and docking models with ECOB and NADPH elucidated their substrate specificities and enantioselectivities. A glucose dehydrogenase-coupling reaction was used as NADPH recycling system to perform continuously the reduction reaction. Recombinant E. coli cell co-expressing YDL124W and Bacillus subtilis glucose dehydrogenase produced (S)-ECHB exclusively.
Subject(s)
Butyrates/chemical synthesis , Butyrates/metabolism , Oxidoreductases/chemistry , Oxidoreductases/metabolism , Saccharomyces cerevisiae Proteins/chemical synthesis , Saccharomyces cerevisiae Proteins/metabolism , Saccharomyces cerevisiae/enzymology , Bacillus subtilis/metabolism , Butyrates/chemistry , Escherichia coli/metabolism , Glucose 1-Dehydrogenase/metabolism , Models, Chemical , NADP/metabolism , Protein Binding , Protein Conformation , Recombinant Proteins/genetics , Recombinant Proteins/isolation & purification , Recombinant Proteins/metabolism , Saccharomyces cerevisiae Proteins/chemistry , Stereoisomerism , Substrate SpecificityABSTRACT
In order to use an enzyme industrially, it is necessary to increase the activity of the enzyme and optimize the reaction characteristics through molecular evolution techniques. We used the error-prone PCR method to improve the reaction characteristics of LipCA lipase discovered in Antarctic Croceibacter atlanticus. Recombinant Escherichia coli colonies showing large halo zones were selected in tributyrin-containing medium. The lipase activity of one mutant strain (M3-1) was significantly increased, compared to the wild-type (WT) strain. M3-1 strain produced about three times more lipase enzyme than did WT strain. After confirming the nucleotide sequence of the M3-1 gene to be different from that of the WT gene by four bases (73, 381, 756, and 822), the secondary structures of WT and M3-1 mRNA were predicted and compared by RNAfold web program. Compared to the mean free energy (MFE) of WT mRNA, that of M3-1 mRNA was lowered by 4.4 kcal/mol, and the MFE value was significantly lowered by mutations of bases 73 and 756. Site-directed mutagenesis was performed to find out which of the four base mutations actually affected the enzyme expression level. Among them, one mutant enzyme production decreased as WT enzyme production when the base 73 was changed (TâC). These results show that one base change at position 73 can significantly affect protein expression level, and demonstrate that changing the mRNA sequence can increase the stability of mRNA, and can increase the production of foreign protein in E. coli.
Subject(s)
Evolution, Molecular , Flavobacteriaceae/enzymology , Lipase/genetics , RNA, Messenger/chemistry , Bacterial Proteins/genetics , Bacterial Proteins/metabolism , Enzyme Stability , Escherichia coli/genetics , Flavobacteriaceae/genetics , Gene Expression , Lipase/metabolism , Mutagenesis, Site-Directed , Mutation , Nucleic Acid Conformation , RNA Stability , RNA, Messenger/genetics , Recombinant Proteins/genetics , Recombinant Proteins/metabolism , TemperatureABSTRACT
Vanillyl alcohol (VA), which is abundant in Vanilla bean, has strong antioxidant activity. However, the use of VA in the food and cosmetics industries is limited, due to its low solubility in emulsion or organic solvents. Meanwhile, medium chain fatty acids and medium chain monoglycerides have antibacterial activity. We synthesized butyric acid vanillyl ester (BAVE) or caprylic acid vanillyl ester (CAVE) from VA with tributyrin or tricaprylin through transesterification reaction using immobilized lipases. BAVE and CAVE scavenged 2,2-diphenyl-1-picrylhydrazyl radicals in organic solvents. In addition, BAVE and CAVE decreased the production rate of conjugated diene and triene in the menhaden oil-in-water emulsion system. While BAVE showed no antibacterial activity, CAVE showed antibacterial activity against food spoilage bacteria, including Bacillus coagulans. In this study, the antibacterial activity of vanillyl ester with medium chain fatty acid was first revealed. Zeta potential measurements confirmed that BAVE and CAVE were inserted into B. coagulans membrane. In addition, the propidium iodide uptake assay and fluorescent microscopy showed that CAVE increased B. coagulans membrane permeability. Therefore, CAVE is expected to play an important role in the food and cosmetics industries as a bi-functional material with both antioxidant and antibacterial activities.
Subject(s)
Antioxidants/chemistry , Caprylates/chemistry , Lipase/chemistry , Anti-Bacterial Agents/pharmacology , Antioxidants/pharmacology , Bacteria/drug effects , Bacteria/growth & development , Benzyl Alcohols/chemistry , Biocatalysis , Caprylates/pharmacology , Enzymes, Immobilized/chemistry , Esterification , Esters/chemistryABSTRACT
3-Chloro-1-phenyl-1-propanol is used as a chiral intermediate in the synthesis of antidepressant drugs. Various microbial reductases were expressed in Escherichia coli, and their activities toward 3-chloro-1-phenyl-1-propanone were evaluated. The yeast reductase YOL151W (GenBank locus tag) exhibited the highest level of activity and exclusively generated the (S)-alcohol. Recombinant YOL151W was purified by Ni-nitrilotriacetic acid (Ni-NTA) and desalting column chromatography. It displayed an optimal temperature and pH of 40 degrees C and 7.5-8.0, respectively. The glucose dehydrogenase coupling reaction was introduced as an NADPH regeneration system. NaOH solution was occasionally added to maintain the reaction solution pH within the range of 7.0-7.5. By using this reaction system, the substrate (30 mM) could be completely converted to the (S)-alcohol product with an enantiomeric excess value of 100%. A homology model of YOL151W was constructed based on the structure of Sporobolomyces salmonicolor carbonyl reductase (Protein Data Bank ID: 1Y1P). A docking model of YOL151W with NADPH and 3-chloro-1-phenyl-1-propanone was then constructed, which showed that the cofactor and substrate bound tightly to the active site of the enzyme in the lowest free energy state and explained how the (S)-alcohol was produced exclusively in the reduction process.
Subject(s)
Hydrocarbons, Chlorinated/metabolism , Oxidoreductases/chemistry , Oxidoreductases/metabolism , Propanols/metabolism , Saccharomyces cerevisiae Proteins/chemistry , Saccharomyces cerevisiae Proteins/metabolism , Saccharomyces cerevisiae/metabolism , Binding Sites , Enzyme Stability , Hydrocarbons, Chlorinated/chemistry , Molecular Conformation , NADP/chemistry , NADP/metabolism , Oxidoreductases/genetics , Oxidoreductases/isolation & purification , Propanols/chemistry , Protein Binding , Saccharomyces cerevisiae/chemistry , Saccharomyces cerevisiae/enzymology , Saccharomyces cerevisiae Proteins/genetics , Saccharomyces cerevisiae Proteins/isolation & purification , Stereoisomerism , Substrate SpecificityABSTRACT
Rhodococcus erythropolis amidase was expressed in Escherichia coli cells. The crude amidase in the cell-free extract was immobilized using the cross-linked enzyme aggregate (CLEA) method. The crude amidase was mixed with bovine serum albumin and then precipitated with ammonium sulfate. The resultant precipitant was subsequently cross-linked with glutaraldehyde. Scanning electron microscopy revealed that this co-CLEA had a ball-like shape of a diameter of approximately 1 micronm. This co-CLEA evidenced hydrolytic activity toward a variety of amide substrates. The amidase co-CLEA evidenced an optimum temperature of 60 degrees and an optimum pH of 8.0, results that were similar to those of the soluble amidase. The reaction stability of the co-CLEA was increased. That is, it was stable up to 50 degrees and in a pH range of 5.0-12.0. Additionally, the co-CLEA could be recovered by centrifugation, and retained 96% activity after 3 repeated cycles. This amidase co-CLEA may prove useful as a substitute for soluble amidase as a biocatalyst in the pharmaceutical and chemical industries.
Subject(s)
Acids/metabolism , Amidohydrolases/metabolism , Amines/metabolism , Bacterial Proteins/metabolism , Enzymes, Immobilized/metabolism , Rhodococcus/enzymology , Amidohydrolases/chemistry , Amidohydrolases/genetics , Bacterial Proteins/chemistry , Bacterial Proteins/genetics , Biotransformation , Cross-Linking Reagents/chemistry , Enzyme Stability , Enzymes, Immobilized/chemistry , Enzymes, Immobilized/genetics , Glutaral/chemistry , Rhodococcus/geneticsABSTRACT
Ethyl (R, S)-4-chloro-3-hydroxybutanoate (ECHB) is a useful chiral building block for the synthesis of L-carnitine and hypercholesterolemia drugs. The yeast reductase, YOL151W (GenBank locus tag), exhibits an enantioselective reduction activity, converting ethyl-4-chlorooxobutanoate (ECOB) exclusively into (R)-ECHB. YOL151W was generated in Escherichia coli cells and purified via Ni- NTA and desalting column chromatography. It evidenced an optimum temperature of 45 degrees C and an optimum pH of 6.5-7.5. Bacillus subtilis glucose dehydrogenase (GDH) was also expressed in Escherichia coli, and was used for the recycling of NADPH, required for the reduction reaction. Thereafter, Escherichia coli cells co-expressing YOL151W and GDH were constructed. After permeablization treatment, the Escherichia coli whole cells were utilized for ECHB synthesis. Through the use of this system, the 30 mM ECOB substrate could be converted to (R)-ECHB.
Subject(s)
Acetoacetates/metabolism , Bacillus subtilis/enzymology , Biotechnology/methods , Butyrates/metabolism , Escherichia coli/metabolism , Glucose 1-Dehydrogenase/genetics , Oxidoreductases/genetics , Saccharomyces cerevisiae Proteins/genetics , Gene Expression , Genetic Engineering , NADP/metabolism , Recombinant Proteins/geneticsABSTRACT
Ergosterol, like cholesterol, has many beneficial physiological activities, and because it has no adverse clinical problem with cholesterol, it is a substance that can be used as a biomaterial in the food and cosmetics industry. However, ergosterol has low oil solubility and is easily crystallized, which is problematic for its direct use in the industry. This problem can be solved by combining fatty acids with ergosterol. In this study, ergosterol derivatives with unsaturated fatty acids were synthesized from ergosterol and various plant oils. Specifically, ergosterol oleate (EO), ergosterol linoleate (EL), and ergosterol linolenate (ELn) were synthesized using Proteus vulgaris K80 lipase. To effectively synthesize these unsaturated fatty acid ergosterol esters (FAEEs), 25â¯mM ergosterol and 40â¯mM plant oil were added into hexane solvent, and transesterification reaction was performed at 40⯰C. Proteus vulgaris K80 lipase showed higher conversion yield than other commercial lipases, due to its high affinity to ergosterol and broad substrate specificity. Rapeseed oil, sunflower seed oil, and linseed oil were used to synthesize EO, EL, and ELn, respectively. The FAEEs were purified, and their purity was confirmed by FT-IR and LC-MS. The solubility of the FAEEs in a tricaprylin solvent was increased 11-16 times, compared to that of ergosterol. We found that EL- and ELn-containing emulsions had strong growth inhibitory activity against some dairy and cosmetic spoilage bacteria.
Subject(s)
Bacteria/drug effects , Ergosterol/pharmacology , Fatty Acids, Unsaturated/pharmacology , Lipase/metabolism , Plant Oils/chemistry , Bacteria/classification , Emulsions , Esterification , Fatty Acids, Unsaturated/chemistry , Linoleic Acid/chemistry , Substrate SpecificityABSTRACT
Castor oil extracted from castor bean has antibacterial property, and has been used in various folk remedies. The major structural component of castor oil, ricinoleic acid, has actual antibacterial activity. Some phenolic compounds derived from plants have antioxidant property. Among them, vanillyl alcohol from vanilla bean has strong antioxidant activity. As vanillyl alcohol has low solubility in hydrophobic solvents and castor oil has low solubility in hydrophilic solvents, there is practical difficulty in using them. We performed lipase-mediated transesterification using vanillyl alcohol and castor oil, and synthesized ricinoleic acid vanillyl ester (RAVE). 2,2-Diphenyl-1-picrylhydrazyl assay and 2,2'-azino-bis (3-ethylbenzothiazoline-6-sulphonic acid) assay revealed that RAVE had a strong antioxidant activity in various organic solvents. RAVE also had antibacterial activity against some food spoilage bacteria. It showed more powerful antibacterial activity for gram positive bacteria than for gram negative bacteria. The critical micelle concentration of RAVE was measured at 7.36 µM and it partitioned exclusively into emulsion phase in water-emulsion system. Zeta potential measurement, membrane release test, and fluorescent microscopy showed that RAVE inserted itself into the bacterial cell membrane, destroyed membrane permeability, and induced cell death. As such, RAVE is a novel multi-functional compound with antioxidant and antibacterial activity, so it can be used as a functional material in the food and cosmetic industries.
Subject(s)
Anti-Bacterial Agents/pharmacology , Antioxidants/pharmacology , Bacteria/drug effects , Benzyl Alcohols/metabolism , Castor Oil/metabolism , Lipase/metabolism , Anti-Bacterial Agents/isolation & purification , Esterification , Ricinoleic Acids , SolventsABSTRACT
An esterase gene, estA1, was cloned from Alteromonas sp. 39-G1 isolated from the Beaufort Sea. The gene is composed of 1,140 nucleotides and codes for a 41,190 Da protein containing 379 amino acids. As a result of a BLAST search, the protein sequence of esterase EstA1 was found to be identical to Alteromonas sp. esterase (GenBank: PHS53692). As far as we know, no research on this enzyme has yet been conducted. Phylogenetic analysis showed that esterase EstA1 was a member of the bacterial lipolytic enzyme family IV (hormone sensitive lipases). Two deletion mutants (Δ20 and Δ54) of the esterase EstA1 were produced in Escherichia coli BL21 (DE3) cells with part of the N-terminal of the protein removed and His-tag attached to the C-terminal. These enzymes exhibited the highest activity toward p-nitrophenyl (pNP) acetate (C2) and had little or no activity towards pNP-esters with acyl chains longer than C6. Their optimum temperature and pH of the catalytic activity were 45°C and pH 8.0, respectively. As the NaCl concentration increased, their enzyme activities continued to increase and the highest enzyme activities were measured in 5 M NaCl. These enzymes were found to be stable for up to 8 h in the concentration of 3-5 M NaCl. Moreover, they have been found to be stable for various metal ions, detergents and organic solvents. These salt-tolerant and chemical-resistant properties suggest that the enzyme esterase EstA1 is both academically and industrially useful.
Subject(s)
Alteromonas/enzymology , Aquatic Organisms/enzymology , Esterases/chemistry , Esterases/isolation & purification , Esterases/metabolism , Salt Tolerance , Amino Acid Sequence , Cloning, Molecular , Enzyme Activation , Enzyme Inhibitors/pharmacology , Enzyme Stability , Esterases/genetics , Hydrogen-Ion Concentration , Ions , Mutation , Recombinant Proteins , Sequence Analysis, DNA , Solvents , Structure-Activity Relationship , Substrate SpecificityABSTRACT
To search for new cold-active lipases, a metagenomic library was constructed using cold-sea sediment samples at Edison Seamount and was screened for lipolytic activities by plating on a tricaprylin medium. Subsequently, a fosmid clone was selected, and the whole sequence of 36 kb insert of the fosmid clone was determined by shotgun sequencing. The sequence analysis revealed the presence of 25 open reading frames (ORF), and ORF20 (EML1) showed similarities to lipases. Phylogenetic analysis of EML1 suggested that the protein belonged to a new family of esterase/lipase together with LipG. The EML1 gene was expressed in Escherichia coli, and purified by metal-chelating chromatography. The optimum activity of the purified EML1 (rEML1) occurred at pH 8.0 and 25 degrees C, respectively, and rEML1 displayed more than 50% activity at 5 degrees C. The activation energy for the hydrolysis of olive oil was determined to be 3.28 kcal/mol, indicating that EML1 is a cold-active lipase. rEML1 preferentially hydrolyzed triacylglycerols acyl-group chains with long chain lengths of > or = 8 carbon atoms and displayed hydrolyzing activities toward various natural oil substrates. rEML1 was resistant to various detergents such as Triton X-100 and Tween 80. This study represents an example which developed a new cold-active lipase from a deep-sea sediment metagenome.
Subject(s)
Geologic Sediments/microbiology , Lipase/genetics , Lipase/metabolism , Caprylates/metabolism , Chromatography, Affinity , Cloning, Molecular , Enzyme Inhibitors/pharmacology , Enzyme Stability , Escherichia coli , Gene Expression , Hydrogen-Ion Concentration , Lipase/chemistry , Molecular Sequence Data , Octoxynol/pharmacology , Olive Oil , Phylogeny , Plant Oils/metabolism , Polysorbates/pharmacology , Recombinant Fusion Proteins/biosynthesis , Recombinant Fusion Proteins/genetics , Recombinant Fusion Proteins/isolation & purification , Sequence Analysis, DNA , Sequence Homology, Amino Acid , Substrate Specificity , Temperature , Triglycerides/metabolismABSTRACT
The Antarctic marine environment provides a good source of novel lipolytic enzymes that possess beneficial properties, i.e., resistance to extreme physical and chemical conditions. We found a lipolytic Escherichia coli colony that was transformed using genomic DNA from Marinobacter lipolyticus 27-A9 isolated from the Antarctic Ross Sea. DNA sequence analysis revealed an open reading frame of lipolytic enzyme gene. The gene translates a protein (LipA9) of 404 amino acids with molecular mass of 45,247 Da. Recombinant LipA9 was expressed in E. coli BL21 (DE3) cells and purified by anion exchange and gel filtration chromatography. The kcat/Km of LipA9 was 175 s-1 µM-1, and the optimum temperature and pH were 70 °C and pH 8.0, respectively. LipA9 had quite high organic solvent stability; it was stable toward several common organic solvents up to 50% concentration. Substrate specificity studies showed that LipA9 preferred a short acyl chain length of p-nitrophenyl ester and triglyceride. Sequence analysis showed that LipA9 contained catalytic Ser72 and Lys75 in S-x-x-K motif, like family VIII esterases. Homology modeling and site-directed mutagenesis studies revealed that Tyr141 and Tyr188 residues were located near the conserved motif and played an important role in catalytic activity.
Subject(s)
Bacterial Proteins/metabolism , Lipolysis , Marinobacter/enzymology , Oceans and Seas , Organic Chemicals/pharmacology , Solvents/pharmacology , Amino Acid Sequence , Antarctic Regions , Bacterial Proteins/chemistry , Bacterial Proteins/genetics , Base Sequence , Conserved Sequence , Enzyme Stability/drug effects , Hydrogen-Ion Concentration , Models, Molecular , Mutagenesis, Site-Directed , Protein Conformation , Substrate Specificity , TemperatureABSTRACT
The M37 lipase from Photobacterium lipolyticum shows an extremely low activation energy and strong activity at low temperatures, with optimum activity seen at 298 K and more than 75% of the optimum activity retained down to 278 K. Though the M37 lipase is most closely related to the filamentous fungal lipase, Rhizomucor miehei lipase (RML) at the primary structure level, their activity characteristics are completely different. In an effort to identify structural components of cold adaptation in lipases, we determined the crystal structure of the M37 lipase at 2.2 A resolution and compared it to that of nonadapted RML. Structural analysis revealed that M37 lipase adopted a folding pattern similar to that observed for other lipase structures. However, comparison with RML revealed that the region beneath the lid of the M37 lipase included a significant and unique cavity that would be occupied by a lid helix upon substrate binding. In addition, the oxyanion hole was much wider in M37 lipase than RML. We propose that these distinct structural characteristics of M37 lipase may facilitate the lateral movement of the helical lid and subsequent substrate hydrolysis, which might explain its low activation energy and high activity at low temperatures.