1GHz clocked distribution of electrically generated entangled photon pairs.

Quantum networks are essential for realising distributed quantum computation and quantum communication. Entangled photons are a key resource, with applications such as quantum key distribution, quantum relays, and quantum repeaters. All components integrated in a quantum network must be synchronised and therefore comply with a certain clock frequency. In quantum key distribution, the most mature technology, clock rates have reached and exceeded 1GHz. Here we show the first electrically pulsed sub-Poissonian entangled photon source compatible with existing fiber networks operating at this clock rate. The entangled LED is based on InAs/InP quantum dots emitting in the main telecom window, with a multi-photon probability of less than 10% per emission cycle and a maximum entanglement fidelity of 89%. We use this device to demonstrate GHz clocked distribution of entangled qubits over an installed fiber network between two points 4.6km apart.

Femtosecond Alexandrite laser passively mode-locked by an InP/InGaP quantum-dot saturable absorber.

An Alexandrite laser passively mode-locked using an InP/InGaP quantum-dot semiconductor saturable absorber mirror (QD-SESAM) was demonstrated. The laser was pumped at 532 nm and generated pulses as short as 380 fs at 775 nm with an average output power of 295 mW. To the best of our knowledge, this is the first report on a passively mode-locked femtosecond Alexandrite laser using a SESAM in general and a QD-SESAM in particular.

Linearly polarized emission from an embedded quantum dot using nanowire morphology control.

GaAs nanowires with elongated cross sections are formed using a catalyst-free growth technique. This is achieved by patterning elongated nanoscale openings within a silicon dioxide growth mask on a (111)B GaAs substrate. It is observed that MOVPE-grown vertical nanowires with cross section elongated in the [21̅1̅] and [1̅12] directions remain faithful to the geometry of the openings. An InGaAs quantum dot with weak radial confinement is realized within each nanowire by briefly introducing indium into the reactor during nanowire growth. Photoluminescence emission from an embedded nanowire quantum dot is strongly linearly polarized (typically >90%) with the polarization direction coincident with the axis of elongation. Linearly polarized PL emission is a result of embedding the quantum dot in an anisotropic nanowire structure that supports a single strongly confined, linearly polarized optical mode. This research provides a route to the bottom-up growth of linearly polarized single photon sources of interest for quantum information applications.

InAsP quantum dot lasers grown by MOVPE.

We report on InAsP quantum dot lasers grown by MOVPE for 730-780 nm wavelength emission and compare performance with InP dot samples grown under similar conditions and with similar structures. 1-4 mm long, uncoated facet InAsP dot lasers emit between 760 and 775 nm and 2 mm long lasers with uncoated facets have threshold current density of 260 Acm(-2), compared with 150 Acm(-2) for InP quantum dot samples, which emit at shorter wavelengths, 715-725 nm. Pulsed lasing is demonstrated for InAsP dots up to 380 K with up to 200 mW output power. Measured absorption spectra indicate the addition of Arsenic to the dots has shifted the available transitions to longer wavelengths but also results in a much larger degree of spectral broadening. These spectra and transmission electron microscopy images indicate that the InAsP dots have a much larger degree of inhomogeneous broadening due to dot size variation, both from layer to layer and within a layer.

Inverse Design of Whispering-Gallery Nanolasers with Tailored Beam Shape and Polarization.

Control over the shape and polarization of the beam emitted by a laser source is important in applications such as optical communications, optical manipulation and high-resolution optical imaging. In this paper, we present the inverse design of monolithic whispering-gallery nanolasers which emit along their axial direction with a tailored laser beam shape and polarization. We design and experimentally verify three types of submicron cavities, each one emitting into a different laser radiation mode: an azimuthally polarized doughnut beam, a radially polarized doughnut beam and a linearly polarized Gaussian-like beam. The measured output laser beams yield a field overlap with respect to the target mode of 92%, 96%, and 85% for the azimuthal, radial, and linearly polarized cases, respectively, thereby demonstrating the generality of the method in the design of ultracompact lasers with tailored beams.

Spectroscopic study of transparency current in mid-infrared quantum cascade lasers.

We report measurements which give direct insight into the origins of the transparency current for λ ~5 µm In0.6Ga0.4As/In0.42Al0.58As quantum cascade lasers in the temperature range of 80-280 K. The transparency current values have been found from broadband transmission measurements through the laser waveguides under sub-threshold operating conditions. Two active region designs were compared. The active region of the first laser is based on double-LO-phonon relaxation approach, while the second device has only one lower level, without specially designed resonant LO-phonon assisted depopulation. It is shown that transparency current contributes more than 70% to the magnitude of threshold current at high temperatures for both designs.

High speed InAs electron avalanche photodiodes overcome the conventional gain-bandwidth product limit.

High bandwidth, uncooled, Indium Arsenide (InAs) electron avalanche photodiodes (e-APDs) with unique and highly desirable characteristics are reported. The e-APDs exhibit a 3dB bandwidth of 3.5 GHz which, unlike that of conventional APDs, is shown not to reduce with increasing avalanche gain. Hence these InAs e-APDs demonstrate a characteristic of theoretically ideal electron only APDs, the absence of a gain-bandwidth product limit. This is important because gain-bandwidth products restrict the maximum exploitable gain in all conventional high bandwidth APDs. Non-limiting gain-bandwidth products up to 580 GHz have been measured on these first high bandwidth e-APDs.

InP/AlGaInP quantum dot semiconductor disk lasers for CW TEM00 emission at 716 - 755 nm.

Multiple layers of InP QDs, self-assembled during epitaxial growth, were incorporated into the active region of an (Al(x)Ga(1-x))(0.51)In(0.49)P based semiconductor disk laser with monolithic Al(x)Ga(1-x)As distributed Bragg reflector. Three gain structure samples were selected from the epitaxial wafer, bonded to single-crystal diamond heatspreaders and optically pumped at 532 nm within a high finesse external laser cavity. Laser emission with peak wavelengths at 716, 729, and 739 nm, respectively, was achieved from the three samples; the latter demonstrating tuning from 729 to 755 nm. Maximum continuous wave output power of 52 mW at 739 nm was achieved with 0.2% output coupling; the threshold and slope efficiency were 220 mW and 5.7% respectively.

Proof-of-principle of surface detection with air-guided quantum cascade lasers.

We report a proof-of-principle of surface detection with air-guided quantum cascade lasers. Laser ridges were designed to exhibit an evanescent electromagnetic field on their top surface that can interact with material or liquids deposited on the device. We employ photoresist and common solvents to provide a demonstration of the sensor setup. We observed spectral as well as threshold currents changes as a function of the deposited material absorption curve. A simple model, supplemented by 2D numerical finite element method simulations, allows one to explain and correctly predict the experimental results.

Intersubband gain-induced dispersion.

Time-resolved transmission spectroscopy of a mid-infrared quantum cascade laser emitting at 11.7 mum allows us to iteratively retrieve the effective refractive index and the extinction coefficient of the gain medium in a broad spectral range with an accuracy of +/-7x10(-3). Besides a 3% slowdown of the group velocity we find a large induced group-velocity dispersion with changing signs in the vicinity of the gain maximum, disclosing implications for self-pulse formation in quantum-cascade lasers. Additionally we measured the temperature in the active region by exploiting the thermo-optic effect. A linear behavior with respect to the current and the duty cycle was observed.