Proton-assisted growth of ultra-flat graphene films.

Graphene films grown by chemical vapour deposition have unusual physical and chemical properties that offer promise for applications such as flexible electronics and high-frequency transistors1-10. However, wrinkles invariably form during growth because of the strong coupling to the substrate, and these limit the large-scale homogeneity of the film1-4,11,12. Here we develop a proton-assisted method of chemical vapour deposition to grow ultra-flat graphene films that are wrinkle-free. Our method of proton penetration13-17 and recombination to form hydrogen can also reduce the wrinkles formed during traditional chemical vapour deposition of graphene. Some of the wrinkles disappear entirely, owing to the decoupling of van der Waals interactions and possibly an increase in distance from the growth surface. The electronic band structure of the as-grown graphene films shows a V-shaped Dirac cone and a linear dispersion relation within the atomic plane or across an atomic step, confirming the decoupling from the substrate. The ultra-flat nature of the graphene films ensures that their surfaces are easy to clean after a wet transfer process. A robust quantum Hall effect appears even at room temperature in a device with a linewidth of 100 micrometres. Graphene films grown by proton-assisted chemical vapour deposition should largely retain their intrinsic performance, and our method should be easily generalizable to other nanomaterials for strain and doping engineering.

Development of an online calculator for the prediction of seizure freedom following pediatric hemispherectomy using the Hemispherectomy Outcome Prediction Scale (HOPS).

OBJECTIVES: Although hemispheric surgeries are among the most effective procedures for drug-resistant epilepsy (DRE) in the pediatric population, there is a large variability in seizure outcomes at the group level. A recently developed HOPS score provides individualized estimation of likelihood of seizure freedom to complement clinical judgement. The objective of this study was to develop a freely accessible online calculator that accurately predicts the probability of seizure freedom for any patient at 1-, 2-, and 5-years post-hemispherectomy. METHODS: Retrospective data of all pediatric patients with DRE and seizure outcome data from the original Hemispherectomy Outcome Prediction Scale (HOPS) study were included. The primary outcome of interest was time-to-seizure recurrence. A multivariate Cox proportional-hazards regression model was developed to predict the likelihood of post-hemispheric surgery seizure freedom at three time points (1-, 2- and 5- years) based on a combination of variables identified by clinical judgment and inferential statistics predictive of the primary outcome. The final model from this study was encoded in a publicly accessible online calculator on the International Network for Epilepsy Surgery and Treatment (iNEST) website (https://hops-calculator.com/). RESULTS: The selected variables for inclusion in the final model included the five original HOPS variables (age at seizure onset, etiologic substrate, seizure semiology, prior non-hemispheric resective surgery, and contralateral fluorodeoxyglucose-positron emission tomography [FDG-PET] hypometabolism) and three additional variables (age at surgery, history of infantile spasms, and magnetic resonance imaging [MRI] lesion). Predictors of shorter time-to-seizure recurrence included younger age at seizure onset, prior resective surgery, generalized seizure semiology, FDG-PET hypometabolism contralateral to the side of surgery, contralateral MRI lesion, non-lesional MRI, non-stroke etiologies, and a history of infantile spasms. The area under the curve (AUC) of the final model was 73.0%. SIGNIFICANCE: Online calculators are useful, cost-free tools that can assist physicians in risk estimation and inform joint decision-making processes with patients and families, potentially leading to greater satisfaction. Although the HOPS data was validated in the original analysis, the authors encourage external validation of this new calculator.

Moiré enhanced charge density wave state in twisted 1T-TiTe2/1T-TiSe2 heterostructures.

Nanoscale periodic moiré patterns, for example those formed at the interface of a twisted bilayer of two-dimensional materials, provide opportunities for engineering the electronic properties of van der Waals heterostructures1-11. In this work, we synthesized the epitaxial heterostructure of 1T-TiTe2/1T-TiSe2 with various twist angles using molecular beam epitaxy and investigated the moiré pattern induced/enhanced charge density wave (CDW) states with scanning tunnelling microscopy. When the twist angle is near zero degrees, 2 × 2 CDW domains are formed in 1T-TiTe2, separated by 1 × 1 normal state domains, and trapped in the moiré pattern. The formation of the moiré-trapped CDW state is ascribed to the local strain variation due to atomic reconstruction. Furthermore, this CDW state persists at room temperature, suggesting its potential for future CDW-based applications. Such moiré-trapped CDW patterns were not observed at larger twist angles. Our study paves the way for constructing metallic twist van der Waals bilayers and tuning many-body effects via moiré engineering.

Observation of Electronic Strong Correlation in VTe_{2}-2sqrt[3]×2sqrt[3] Monolayer.

Strong electron correlation under two-dimensional limit is intensely studied in the transition metal dichalcogenides monolayers, mostly within their charge density wave (CDW) states that host a star of David period. Here, by using scanning tunneling microscopy and spectroscopy and density functional theory calculations with on-site Hubbard corrections, we study the VTe_{2} monolayer with a different 2sqrt[3]×2sqrt[3] CDW period. We find that the dimerization of neighboring Te-Te and V-V atoms occurs during the CDW transition, and that the strong correlation effect opens a Mott-like full gap at Fermi energy (E_{F}). We further demonstrate that such a Mott phenomenon is ascribed to the combination of the CDW transition and on-site Coulomb interactions. Our work provides a new platform for exploring Mott physics in 2D materials.

Iron Vacancy Tunable Superconductor-Insulator Transition in FeSe/SrTiO_{3} Monolayer.

The Fe_{4}Se_{5} with a sqrt[5]×sqrt[5] Fe vacancy order is suggested to be a Mott insulator and the parent state of bulk FeSe superconductor. The iron vacancy ordered state has been considered as a Mott insulator and the parent compound of bulk FeSe-based superconductors. However, for the superconducting FeSe/SrTiO_{3} monolayer (FeSe/STO) with an interface-enhanced high transition temperature (T_{c}), the electronic evolution from its Fe vacancy ordered parent phase to the superconducting state, has not been explored due to the challenge to realize an Fe vacancy order in the FeSe/STO monolayer, even though important to the understanding of superconductivity mechanism. In this study, we developed a new method to generate Fe vacancies within the FeSe/STO monolayer in a tunable fashion, with the assistance of atomic hydrogen. As a consequence, an insulating sqrt[5]×sqrt[5] Fe vacancy ordered monolayer is realized as the parent state. By using scanning tunneling microscopy and scanning tunneling spectroscopy, the spectral evolution from superconductivity to insulator is fully characterized. Surprisingly, a prominent spectral weight transfer occurs, thus implying a strong electron correlation effect. Moreover, the Fe vacancy induced insulating gap exhibits no Mott gap-like features. This work provides new insights in understanding the high-T_{c} superconductivity in FeSe/STO monolayer.

Comparison of the real-world effectiveness of vertical versus lateral functional hemispherotomy techniques for pediatric drug-resistant epilepsy: A post hoc analysis of the HOPS study.

OBJECTIVE: This study was undertaken to determine whether the vertical parasagittal approach or the lateral peri-insular/peri-Sylvian approach to hemispheric surgery is the superior technique in achieving long-term seizure freedom. METHODS: We conducted a post hoc subgroup analysis of the HOPS (Hemispheric Surgery Outcome Prediction Scale) study, an international, multicenter, retrospective cohort study that identified predictors of seizure freedom through logistic regression modeling. Only patients undergoing vertical parasagittal, lateral peri-insular/peri-Sylvian, or lateral trans-Sylvian hemispherotomy were included in this post hoc analysis. Differences in seizure freedom rates were assessed using a time-to-event method and calculated using the Kaplan-Meier survival method. RESULTS: Data for 672 participants across 23 centers were collected on the specific hemispherotomy approach. Of these, 72 (10.7%) underwent vertical parasagittal hemispherotomy and 600 (89.3%) underwent lateral peri-insular/peri-Sylvian or trans-Sylvian hemispherotomy. Seizure freedom was obtained in 62.4% (95% confidence interval [CI] = 53.5%-70.2%) of the entire cohort at 10-year follow-up. Seizure freedom was 88.8% (95% CI = 78.9%-94.3%) at 1-year follow-up and persisted at 85.5% (95% CI = 74.7%-92.0%) across 5- and 10-year follow-up in the vertical subgroup. In contrast, seizure freedom decreased from 89.2% (95% CI = 86.3%-91.5%) at 1-year to 72.1% (95% CI = 66.9%-76.7%) at 5-year to 57.2% (95% CI = 46.6%-66.4%) at 10-year follow-up for the lateral subgroup. Log-rank test found that vertical hemispherotomy was associated with durable seizure-free progression compared to the lateral approach (p = .01). Patients undergoing the lateral hemispherotomy technique had a shorter time-to-seizure recurrence (hazard ratio = 2.56, 95% CI = 1.08-6.04, p = .03) and increased seizure recurrence odds (odds ratio = 3.67, 95% CI = 1.05-12.86, p = .04) compared to those undergoing the vertical hemispherotomy technique. SIGNIFICANCE: This pilot study demonstrated more durable seizure freedom of the vertical technique compared to lateral hemispherotomy techniques. Further studies, such as prospective expertise-based observational studies or a randomized clinical trial, are required to determine whether a vertical approach to hemispheric surgery provides superior long-term seizure outcomes.

Hemispherectomy Outcome Prediction Scale: Development and validation of a seizure freedom prediction tool.

OBJECTIVE: To develop and validate a model to predict seizure freedom in children undergoing cerebral hemispheric surgery for the treatment of drug-resistant epilepsy. METHODS: We analyzed 1267 hemispheric surgeries performed in pediatric participants across 32 centers and 12 countries to identify predictors of seizure freedom at 3 months after surgery. A multivariate logistic regression model was developed based on 70% of the dataset (training set) and validated on 30% of the dataset (validation set). Missing data were handled using multiple imputation techniques. RESULTS: Overall, 817 of 1237 (66%) hemispheric surgeries led to seizure freedom (median follow-up = 24 months), and 1050 of 1237 (85%) were seizure-free at 12 months after surgery. A simple regression model containing age at seizure onset, presence of generalized seizure semiology, presence of contralateral 18-fluoro-2-deoxyglucose-positron emission tomography hypometabolism, etiologic substrate, and previous nonhemispheric resective surgery is predictive of seizure freedom (area under the curve = .72). A Hemispheric Surgery Outcome Prediction Scale (HOPS) score was devised that can be used to predict seizure freedom. SIGNIFICANCE: Children most likely to benefit from hemispheric surgery can be selected and counseled through the implementation of a scale derived from a multiple regression model. Importantly, children who are unlikely to experience seizure control can be spared from the complications and deficits associated with this surgery. The HOPS score is likely to help physicians in clinical decision-making.

Tuning the Electronic Structure of an α-Antimonene Monolayer through Interface Engineering.

The interfacial charge transfer from the substrate may influence the electronic structure of the epitaxial van der Waals (vdW) monolayers and, thus, their further technological applications. For instance, the freestanding Sb monolayer in the puckered honeycomb phase (α-antimonene), the structural analogue of black phosphorene, was predicted to be a semiconductor, but the epitaxial one behaves as a gapless semimetal when grown on the Td-WTe2 substrate. Here, we demonstrate that interface engineering can be applied to tune the interfacial charge transfer and, thus, the electron band of the epitaxial monolayer. As a result, the nearly freestanding (semiconducting) α-antimonene monolayer with a band gap of ∼170 meV was successfully obtained on the SnSe substrate. Furthermore, a semiconductor-semimetal crossover is observed in the bilayer α-antimonene. This study paves the way toward modifying the electron structure in two-dimensional vdW materials through interface engineering.

Ligand Non-innocence and Single Molecular Spintronic Properties of AgII Dibenzocorrole Radical on Ag(111).

A facile method for the quantitative preparation of silver dibenzo-fused corrole Ag-1 is described. In contrast to the saddle conformation resolved by single-crystal X-ray analysis for Ag-1, it adopts an unprecedented domed geometry, with up and down orientations, when adsorbed on an Ag(111) surface. Sharp Kondo resonances near Fermi level, both at the corrole ligand and the silver center were observed by cryogenic STM, with relatively high Kondo temperature (172 K), providing evidence for a non-innocent AgII -corrole.2- species. Further investigation validates that benzene ring fusion and molecule-substrate interactions play pivotal roles in enhancing Ag(4d(x2 -y2 ))-corrole (π) orbital interactions, thereby stabilizing the open-shell singlet AgII -corrole.2- on Ag(111) surface. Moreover, this strategy used for constructing metal-free benzene-ring fused corrole ligand gives rise to inspiration of designing novel metal-corrole compound for multichannel molecular spintronics devices.

Erratum: Realization of a Metallic State in 1T-TaS_{2} with Persisting Long-Range Order of a Charge Density Wave [Phys. Rev. Lett. 123, 206405 (2019)].

This corrects the article DOI: 10.1103/PhysRevLett.123.206405.

Realization of a Metallic State in 1T-TaS_{2} with Persisting Long-Range Order of a Charge Density Wave.

Metallization of 1T-TaS_{2} is generally initiated at the domain boundary of a charge density wave (CDW), at the expense of its long-range order. However, we demonstrate in this study that the metallization of 1T-TaS_{2} can be also realized without breaking the long-range CDW order upon surface alkali doping. By using scanning tunneling microscopy, we find the long-range CDW order is always persisting, and the metallization is instead associated with additional in-gap excitations. Interestingly, the in-gap excitation is near the top of the lower Hubbard band, in contrast to a conventional electron-doped Mott insulator where it is beneath the upper Hubbard band. In combination with the numerical calculations, we suggest that the appearance of the in-gap excitations near the lower Hubbard band is mainly due to the effectively reduced on-site Coulomb energy by the adsorbed alkali ions.

Superconductivity in Potassium-Intercalated T d-WTe2.

To realize a topological superconductor is one of the most attracting topics because of its great potential in quantum computation. In this study, we successfully intercalate potassium (K) into the van der Waals gap of type II Weyl semimetal WTe2 and discover the superconducting state in K xWTe2 through both electrical transport and scanning tunneling spectroscopy measurements. The superconductivity exhibits an evident anisotropic behavior. Moreover, we also uncover the coexistence of superconductivity and the positive magnetoresistance state. Structural analysis substantiates the negligible lattice expansion induced by the intercalation, therefore suggesting K-intercalated WTe2 still hosts the topological nontrivial state. These results indicate that the K-intercalated WTe2 may be a promising candidate to explore the topological superconductor.

Tailoring Kinetics on a Topological Insulator Surface by Defect-Induced Strain: Pb Mobility on Bi2Te3.

Heteroepitaxial structures based on Bi2Te3-type topological insulators (TIs) exhibit exotic quantum phenomena. For optimal characterization of these phenomena, it is desirable to control the interface structure during film growth on such TIs. In this process, adatom mobility is a key factor. We demonstrate that Pb mobility on the Bi2Te3(111) surface can be modified by the engineering local strain, ε, which is induced around the point-like defects intrinsically forming in the Bi2Te3(111) thin film grown on a Si(111)-7 × 7 substrate. Scanning tunneling microscopy observations of Pb adatom and cluster distributions and first-principles density functional theory (DFT) analyses of the adsorption energy and diffusion barrier Ed of Pb adatom on Bi2Te3(111) surface show a significant influence of ε. Surprisingly, Ed reveals a cusp-like dependence on ε due to a bifurcation in the position of the stable adsorption site at the critical tensile strain εc ≈ 0.8%. This constitutes a very different strain-dependence of diffusivity from all previous studies focusing on conventional metal or semiconductor surfaces. Kinetic Monte Carlo simulations of Pb deposition, diffusion, and irreversible aggregation incorporating the DFT results reveal adatom and cluster distributions compatible with our experimental observations.

Experimental Observation of Topological Edge States at the Surface Step Edge of the Topological Insulator ZrTe_{5}.

We report an atomic-scale characterization of ZrTe_{5} by using scanning tunneling microscopy. We observe a bulk band gap of ∼80 meV with topological edge states at the step edge and, thus, demonstrate that ZrTe_{5} is a two-dimensional topological insulator. We also find that an applied magnetic field induces an energetic splitting of the topological edge states, which can be attributed to a strong link between the topological edge states and bulk topology. The relatively large band gap makes ZrTe_{5} a potential candidate for future fundamental studies and device applications.

Majorana Zero Mode Detected with Spin Selective Andreev Reflection in the Vortex of a Topological Superconductor.

Recently, theory has predicted a Majorana zero mode (MZM) to induce spin selective Andreev reflection (SSAR), a novel magnetic property which can be used to detect the MZM. Here, spin-polarized scanning tunneling microscopy or spectroscopy has been applied to probe SSAR of MZMs in a topological superconductor of the Bi_{2}Te_{3}/NbSe_{2} heterostructure. The zero-bias peak of the tunneling differential conductance at the vortex center is observed substantially higher when the tip polarization and the external magnetic field are parallel rather than antiparallel to each other. This spin dependent tunneling effect provides direct evidence of MZM and reveals its magnetic property in addition to the zero energy modes. Our work will stimulate MZM research on these novel physical properties and, hence, is a step towards experimental study of their statistics and application in quantum computing.

Influence of strain on water adsorption and dissociation on rutile TiO2(110) surface.

The influence of externally applied strain on water adsorption and dissociation on a defect-free rutile TiO2(110) surface is studied by using first-principles calculations. We found that while compressive strain makes water adsorption and dissociation less favorable, tensile strain increases the energy gain of water adsorption, and decreases the energy cost of water dissociation. Specifically, dissociative water becomes more stable than molecular water when an 8% tensile in-plane strain is applied. Moreover, the dissociation barrier decreases with increasing strain more rapidly for more isolated water. The rate of decrease of this barrier for nearly isolated water is 0.017 eV per 1% biaxial strain. This demonstrates that applying strain is a possible way to engineer the surface adsorption and dissociation of water on a TiO2(110) surface, and therefore engineer the relevant surface reactivity.

[Effect of allicin on myocardial fibrosis after myocardial infarction in rats and its relationship with TGFß/Smads signal transduction].

Allicin is the internationally accepted active substance of garlic, and has cardiovascular protective effect. This research was designed to investigate the effect of allicin on myocardial fibrosis after myocardial infarction and explore the relationship between the effect and TGFß1/Smads signaling pathway. The rat myocardial infarction model were made by ligating the left anterior desending coronary artery. The drugs were administered intraperitoneally 24 h after the operation. After 21 days, the rats were sacrificed and myocardial collagen fibres were observed by Masson staining. The protein expression of Ⅰ, Ⅲ collagen and TGFß1, Smad3, Smad7 in the myocardium was measured by the immunohistochemistry. The results showed that myocardial fibrosis was serious and the expression of Ⅰ, Ⅲ collagen was increased in model group. After treatment with allicin, the myocardial fibrosis could be relieved markedly, and the expression of collagen was down-regulated. Meanwhile, TGFß1 and Smad3 in heart tissue could be down-regulated and Smad7 could be up-regulated in allicin groups. So allicin may exhibit anti-myocardial fibrosis effect on rats, and the mechanism of this is related to TGFß/Smads signal transduction.

Realization of monolayer ZrTe5 topological insulators with wide band gaps.

Two-dimensional topological insulators hosting the quantum spin Hall effect have application potential in dissipationless electronics. To observe the quantum spin Hall effect at elevated temperatures, a wide band gap is indispensable to efficiently suppress bulk conduction. Yet, most candidate materials exhibit narrow or even negative band gaps. Here, via elegant control of van der Waals epitaxy, we have successfully grown monolayer ZrTe5 on a bilayer graphene/SiC substrate. The epitaxial ZrTe5 monolayer crystalizes in two allotrope isomers with different intralayer alignments of ZrTe3 prisms. Our scanning tunneling microscopy/spectroscopy characterization unveils an intrinsic full band gap as large as 254 meV and one-dimensional edge states localized along the periphery of the ZrTe5 monolayer. First-principles calculations further confirm that the large band gap originates from strong spin-orbit coupling, and the edge states are topologically nontrivial. These findings thus provide a highly desirable material platform for the exploration of the high-temperature quantum spin Hall effect.

Sequential photo-oxidation of methanol to methyl formate on TiO2(110).

Methyl formate is produced from the photo-oxidation of methanol on preoxidized TiO(2)(110). We demonstrate that two consecutive photo-oxidation steps lead to methyl formate using mass spectrometry and scanning tunneling microscopy. The first step in methanol oxidation is formation of methoxy by the thermal dissociation of the O-H bond to yield adsorbed CH(3)O and water. Formaldehyde is produced via hole-mediated oxidation of adsorbed methoxy in the first photochemical step. Next, transient HCO is made photochemically from formaldehyde. The HCO couples with residual methoxy on the surface to yield methyl formate. Exposure of the titania surface to O(2) is required for these photo-oxidation steps in order to heal surface and near-surface defects that can serve as hole traps. Notably, residual O adatoms are not required for photochemical production of methyl formate or formaldehyde. All O adatoms react thermally with methanol to form methoxy and gaseous water at rt, leaving a surface devoid of O adatoms. The mechanism provides insight into the photochemistry of TiO(2) and suggests general synthetic pathways that are the result of the ability to activate both alkoxides and aldehydes using photons.