[Importance of the accurate diagnosis and treatment of patients with lumbar degenerative scoliosis].

Under the background of aging population, the incidence of degenerative lumbar scoliosis is increasing year by year. How to conduct reasonable clinical diagnosis and treatment has gradually become a hot topic in the field of spinal surgery. This article discusses the key issues in the diagnosis and treatment of degenerative spinal deformities, including symptom differentiation, spinal alignment reconstruction, fusion level selection, and clinical efficacy evaluation. The aim is to further promote the accurate diagnosis and treatment of degenerative spinal deformities.

[Interpretation of the reporting specifications for mixed methods systematic reviews].

The number of mixed methods systematic reviews (MMSRs) published internationally is increasing day by day, thanks to the continuous development and improvement of MMSRs methodological guidelines and reporting specification, which effectively promote the depth and breadth of evidence synthesis and integration results. However, the application of this method has yet to be popularized in China. With the continuous development of mixed methods research and evidence-based medicine in our country, the number of MMSRs will gradually increase. This paper aims to analyze the reporting specifications for MMSRs with cases to improve the quality of evidence integration and reporting standardization of domestic relevant researchers in MMSRs.

[Research on friction and wear behaviors of silicon-lithium spray coating on zirconia ceramics].

OBJECTIVE: To study microstructure, friction and wear behaviors of silicon-lithium spray coating on the surface of zirconia ceramics and to preliminarily evaluate its esthetic so as to provide support and guidance for the clinical application. METHODS: Zirconia ceramic specimens were randomly divided into three groups: coating group (two subgroups), polishing group (two subgroups), and glazing group (four subgroups), with 10 samples in each subgroup. The two subgroups of coating group were the zirconia ceramics with the untreated and preliminary polishing surfaces sprayed with silicon-lithium coating, respectively. The two subgroups of polishing group were preliminary polishing and fine polishing of zirconia ceramics, respectively. The four subgroups of glazing group were preliminarily polished zirconia ceramics glazed with Biomic and Stain/Glaze products, respectively; and untreated zirconia ceramics glazed with Biomic and Stain/Glaze products, respectively. The above 8 subgroups of zirconia ceramic specimens were used as friction pairs with 80 steatite ceramics for 50 000 chewing cycles under 50 N vertical load and artificial saliva lubrication using chewing simulation. Scanning electron microscope was used to observe the microstructure of the surface and section of the coating group, and the thickness of the coating and glazing were measured. The linear roughness of the coating and polishing groups was mea-sured using a laser confocal scanning microscope. Vickers hardness was measured using a microhardness tester and the esthetic of zirconia ceramic full crown sprayed with silicon-lithium coating was preliminarily evaluated. White light interferometer was used to measure the width, the maximum depth and the volume of the wear scars of each group, and the wear depth of steatite ceramics and wear rate of zirconia ceramic specimens were calculated. Kruskal-Wallis nonparametric test and Dunn's multiple comparisons test were used to analyze the wear depth of each group (α=0.05). RESULTS: The microstructures of the silica-lithium spray coatings on the untreated and preliminarily polished zirconia ceramic surfaces showed the protruding defects, and the line roughness of coating group was larger than that of the polishing group. The median thickness of the silica-lithium spray coating on the preliminarily polished zirconia ceramic was 13.0 µm (interquartile range, IQR: 11.6, 17.9), while that of the silica-lithium spray coating on the untreated zirconia ceramic was 4.4 µm (IQR: 4.1, 4.7). The Vickers hardness and wear rate of the coating group were between the polishing group and the glazing group. The wear depths of the wear scars of steatite ceramics were the glazing group, coating group, and polishing group in descending order, and there was statistically significant difference between glazing and polishing groups (P < 0.05). With the increase of polishing procedure, the wear depth of steatite ceramics decreased in each subgroups. The orders of maximum depth and volume of wear scars of zirconia ceramic were the glazing group, coating group, and polishing group in descending order, and there was statistically significant difference in the maximum depth of wear scars between glazing and polishing groups (P < 0.05). CONCLUSION: The silica-lithium spray coating on the zirconia ceramic, can be used as a new method for zirconia ceramic surface treatment, because it can increase the esthetic of zirconia ceramics compared with polishing and reduce the wear of steatite ceramics compared with glazing.

[Research progress on the effects of proanthochanidins in reshaping microbiota and suppressing inflammation].

Proanthocyanidins (PCs) are a class of polyphenols that are composed of flavanate monomers and their polymers, which have antibacterial and anti-inflammatory properties with very few side effects. This article reviews the mechanism by which PCs differentially regulate microbiota, reshape microflora diversity and play a role in suppressing inflammation, providing a reference for the basic research of PCs in improving female vaginal health, and is expected to provide a new idea and breakthrough for the combined use of PCs with other antibacterial drugs in the treatment of vaginitis.

[The application of ultrasound in the diagnosis of small bowel volvulus in adults].

Objective: To analyze the ultrasound characteristics of small bowel volvulus among adults and to investigate the value of ultrasound in the diagnosis of small bowel volvulus. Methods: Totally 34 adults with small bowel volvulus confirmed by clinical diagnosis or surgery and who underwent ultrasound examination at Peking Union Medical College Hospital from August 2017 to October 2022 were enrolled, including 19 males and 15 females, aged (55.0±21.8) years (range: 19 to 94 years). The clinical characteristics, CT images and ultrasound images of the patients were retrospectively reviewed, and the ultra, sound features of small bowel volvulus and its diagnostic efficacy were analyzed. Results: Abdominal pain was the typical clinical symptom of all patients. Other symptoms included 21 cases of abdominal distension, 19 cases of nausea and vomiting, and 13 cases of cessation of passage of stool or flatus. Eight patients had signs of peritonitis and 22 patients had abnormal bowel sounds. Twenty patients had a history of abdominal surgery. Twenty-seven patients underwent surgery for intestinal obstruction, and the remaining 7 patients improved after conservative treatment. All cases were evaluated by ultrasound, 11 cases showed a "whirl sign" and were diagnosed as small bowel volvulus, the diagnostic accuracy rate was 32.4% (11/34), ultrasound simultaneously diagnosed intestinal obstruction in 21 cases, 17 cases of abdominal effusion, 4 cases of intestinal wall thickening, 2 cases of abdominal mass, 1 case of intussusception, 1 case of right sided inguinal hernia. CT and ultrasound had a consistent positive discovery in 88.2% (30/34) of all the patients. Conclusion: Ultrasound is valuable in the diagnosis of small bowel volvulus and the evaluation of complications.

[Independent innovation research, development and transformation of precise bionic repair technology for oral prosthesis].

According to the fourth national oral health epidemiological survey report (2018), billions of teeth are lost or missing in China, inducing chewing dysfunction, which is necessary to build physiological function using restorations. Digital technology improves the efficiency and accuracy of oral restoration, with the application of three-dimensional scans, computer-aided design (CAD), computer-aided manufacturing (CAM), bionic material design and so on. However, the basic research and product development of digital technology in China lack international competitiveness, with related products basically relying on imports, including denture 3D design software, 3D oral printers, and digitally processed materials. To overcome these difficulties, from 2001, Yuchun Sun's team, from Peking University School and Hospital of Stomatology, developed a series of studies in artificial intelligence design and precision bionics manufacturing of complex oral prostheses. The research included artificial intelligence design technology for complex oral prostheses, 3D printing systems for oral medicine, biomimetic laminated zirconia materials and innovative application of digital prosthetics in clinical practice. The research from 2001 to 2007 was completed under the guidance of Prof. Peijun Lv and Prof. Yong Wang. Under the support of the National Natural Science Foundation of China, the National Science and Technology Support Program, National High-Tech R & D Program (863 Program) and Beijing Training Project for the Leading Talents in S & T, Yuchun Sun's team published over 200 papers in the relevant field, authorized 49 national invention patents and 1 U.S. invention patent and issued 2 national standards. It also developed 8 kinds of core technology products in digital oral prostheses and 3 kinds of clinical diagnosis and treatment programs, which significantly improved the design efficiency of complex oral prostheses, the fabrication accuracy of metal prostheses and the bionic performance of ceramic materials. Compared with similar international technologies, the program doubled the efficiency of bionic design and manufacturing accuracy and reduced the difficulty of diagnosis and cost of treatment and application by 50%, with the key indicators of those products reaching the international leading level. This program not only helped to realize precision, intelligence and efficiency during prostheses but also provided functional and aesthetic matches for patients after prostheses. The program was rewarded with the First Technical Innovation Prize of the Beijing Science and Technology Awards (2020), Gold Medal of Medical Research Group in the First Medical Science and Technology Innovation Competition of National Health Commission of the People's Republic of China (2020) and Best Creative Award in the First Translational Medical Innovation Competition of Capital (2017). This paper is a review of the current situation of artificial intelligence design and precision bionics manufacturing of complex oral prosthesis.

[Efficacy comparison of minimally invasive atlantoaxial mass fusion and open atlantoaxial fusion in the treatment of atlantoaxial dislocation].

Objective: To compare the clinical effects of minimally invasive intermuscular atlantoaxial lateral mass fusion (Mis-PALF) and open atlantoaxial fusion in patients with atlantoaxial dislocation. Methods: The clinical data of patients with atlantoaxial dislocation who received Mis-PALF operation (17 cases) or open atlantoaxial fusion (88 cases, as control) in the Third Hospital of Peking University from September 2015 to September 2021 were analyzed retrospectively. In Mis-PALF group, there were 9 males and 8 females, aged (45.8±19.8) years; and there were 48 males and 40 females in the control group, aged (50.0±13.9) years. The operation time, perioperative blood loss, postoperative body temperature, postoperative pain [assessed with visual analogue scale (VAS)], postoperative additional analgesic drugs, postoperative hospitalization time, the improvement rate of Japanese Orthopedic Association (JOA) scores of spinal cord function in three-months follow-up and complications were compared between the two groups. Results: Mis-PALF group had less perioperative blood loss than control group [(111.8±35.9)ml vs (362.9±18.6)ml, P<0.01], shorter hospitalization time [(3.06±0.63) days vs (4.24±0.14) days, P<0.01] and fewer additional analgesic drugs (3/17 vs 56/88, P<0.01). There was no significant difference between the Mis-PALF and control group in operation time [(125±7)min vs (113±8)min, P=0.525], patients with fever(11/17 vs 37/88, P=0.086) or postoperative pain (1/17 vs 13/88, P=0.357), the improvement rate of JOA score (66.9%±28.8% vs 74.2%±28.6%, P=0.409) and complications rate (1/17 vs 3/88, P=1.000). Conclusion: Mis-PALF can significantly reduce the perioperative blood loss, shorten the postoperative hospitalization time and the additionally use of analgesic drugs without increasing complications.

[Association of glutamate receptor metabotropic 5 polymorphisms with schizophrenia susceptibility in a Chinese Han population].

Objectives: To investigate the association of single nucleotide polymorphisms (SNP) of glutamate receptor metabotropic 5 (GRM5) gene with schizophrenia susceptibility(SZ) in a Chinese Han population. Methods: Twenty-two SNPs located in GRM5 gene in 528 paranoid SZ patients and 528 control subjects recruited from northern Henanwere analyzed. The clinical features of 267 first-episode SZ patients were assessed with the Positive and Negative Syndrome Scale (PANSS). Results: The SZ group included 264 males and 264 females, aged (27±8) years; the healthy control group had 264 males and 264 females, aged (28±8) years.The differences in the genotypic and allelic frequencies of two SNPs (rs567990 and rs12421343) were statistically significant between the SZ patients and control groups (all P<0.05). The allele frequency of rs504183 was also statistically different between the two groups (P=0.030). When the subjects were stratified by sex, the genotypic and allelic frequencies of rs12421343 in female subjects were statistically different between the SZ patients and control groups. The allele frequencies of SNPs (rs12422021, rs567990, and rs7101540) were also statisticallydifferent between the two groups (all P<0.05). Meanwhile, rs567990 AG+GG carriers had a higher risk for SZ than AA carriers in female subjects(OR=1.946, 95%CI: 1.264-2.995). In addition, the patients with different genotypes (GG, AA+AG) of rs12422021 showed statistically significant differences in PANSS total score(84.8±24.4 vs 75.3±18.6), positive (16.2±4.3 vs 14.4±4.2), excitement (12.4±5.1 vs 10.2±4.1) and cognitive impairment factor scores (15.2±6.8 vs 13.3±3.9) (all P<0.05). The patients with AC and the other two genotypes (AA and CC) of rs504183 showed statistically significant differences in PANSS negative factor score(27.4±9.9 vs 24.7±8.4 and 23.4±8.1, both P<0.05). Conclusion: The current study provides further evidence that GRM5 is associated with SZ, and suggests a putative sex difference.

Transcatheter aortic valve implantation amid the COVID-19 pandemic: a nationwide analysis of the first COVID-19 wave in the Netherlands.

INTRODUCTION: The coronavirus disease 2019 (COVID-19) pandemic has put tremendous pressure on healthcare systems. Most transcatheter aortic valve implantation (TAVI) centres have adopted different triage systems and procedural strategies to serve highest-risk patients first and to minimise the burden on hospital logistics and personnel. We therefore assessed the impact of the COVID-19 pandemic on patient selection, type of anaesthesia and outcomes after TAVI. METHODS: We used data from the Netherlands Heart Registration to examine all patients who underwent TAVI between March 2020 and July 2020 (COVID cohort), and between March 2019 and July 2019 (pre-COVID cohort). We compared patient characteristics, procedural characteristics and clinical outcomes. RESULTS: We examined 2131 patients who underwent TAVI (1020 patients in COVID cohort, 1111 patients in pre-COVID cohort). EuroSCORE II was comparable between cohorts (COVID 4.5 ± 4.0 vs pre-COVID 4.6 ± 4.2, p = 0.356). The number of TAVI procedures under general anaesthesia was lower in the COVID cohort (35.2% vs 46.5%, p < 0.001). Incidences of stroke (COVID 2.7% vs pre-COVID 1.7%, p = 0.134), major vascular complications (2.3% vs 3.4%, p = 0.170) and permanent pacemaker implantation (10.0% vs 9.4%, p = 0.634) did not differ between cohorts. Thirty-day and 150-day mortality were comparable (2.8% vs 2.2%, p = 0.359 and 5.2% vs 5.2%, p = 0.993, respectively). CONCLUSIONS: During the COVID-19 pandemic, patient characteristics and outcomes after TAVI were not different than before the pandemic. This highlights the fact that TAVI procedures can be safely performed during the COVID-19 pandemic, without an increased risk of complications or mortality.

[The relevance of electrocardiographic abnormalities and prognosis in patients with paraquat poisoning].

Objective: To investigate the relationship between electrocardiographic (ECG) changes and prognosis of paraquat poisoning patients, so as to provide evidence for the condition assessment in paraquat poisoning patients. Methods: In January 2022, The clinical data of paraquat poisoning patients were retrospectively analyzed in the First Affiliated Hospital of Wenzhou Medical University from January 1, 2016 to December 31, 2021. The patients' basic information (age, sex, underlying disease, and occupation) and the ECG within 24 hours were collected, and the data were statistically analyzed by SPSS 22.0. One variable analysis and multivariable logistic regression analysis were used to analyze the risk factors related to prognosis determine in their ECG. The receiver operating characteristic (ROC) curve were used to evaluate the diagnostic value of ECG indexes in patients with paraquat poisoning. Results: A total of 145 patients with paraquat poisoning were finally enrolled in this study, there were 84 patients survived and 60 patients died. One variable analysis revealed that heart rate (P=0.000) , QTc changes (P=0.000) , and ST-T changes (P=0.007) of ECG had statistically significant differences in the prognosis of paraquat poisoning patients between the survival group and the death group. Multifactorial logistic results showed that heart rate (OR=1.059, 95%CI: 1.033~1.086) and QTc (OR=1.015, 95%CI: 1.000~1.029) were independent risk factors for death diagnosis of patients with paraquat poisoning (P<0.05) . ROC curve analysis revealed that the area under the cure (AUC) of the prediction model constructed based on heart rate and QTc was 0.832 (95%CI: 0.765~0.899) , with the best diagnostic efficacy. Conclusion: Heart rate, QTc and the prediction model constructed based on both can be used as prognostic indicators for the diagnosis of patients with paraquat poisoning, and which have reference value for clinical prognosis diagnosis.

Palliative care education and its effectiveness: a systematic review.

BACKGROUND: Palliative care education (PCE) is an important public health approach to palliative care and is crucial to improving its utilisation. The present study aims to develop a comprehensive understanding of PCE and its effectiveness. METHOD: A systematic review approach, including narrative synthesis, was used to review qualitative and quantitative studies published in the English language between January 1969 and January 2019, focussing on PCE programs. RESULTS: Thirty-nine research studies were included in the systematic review. The target audience of the included studies were mostly healthcare professionals, followed by family caregivers. Definitions of death and palliative care, symptom management and communication were leading themes in the reviewed PCE programs. The educational resources used in PCE programs were mainly self-developed teaching materials, with some programs utilising eLearning resources. The included PCE programs were effective in improving knowledge, attitude and confidence in palliative care and the satisfaction of participant learning experience. CONCLUSION: PCE is a useful tool to improve knowledge of, confidence in and attitudes towards palliative care amongst healthcare professionals and carers. To make palliative care a public health issue, PCE should be expanded to the public and policy-makers.

[Effect of RNF152 on NO induced apoptosis of colon cancer cells].

Objective: To investigate the role and mechanism of ring finger protein 152 (RNF152) in the development of colitis-associated colon cancer (CAC). Methods: CAC was induced by azoxymethane (AOM) and dextran sulfate sodium (DSS) in C57BL/6 mice. Three different stages of mice during the development of colon cancer were obtained, named AD1, AD2 and AD3, respectively. A control group of mice without any treatment was set up as well. The expression of RNF152 in mouse colon tissues was measured by real-time quantitative polymerase chain reaction (RT-qPCR). The effects of RNF152 overexpression on apoptosis and nitric oxide (NO) induced apoptosis was examined by flow cytometry. The expressions of Bcl-2 and Bcl-XL were detected by western blot. Results: CAC was effectively induced by AOM and DSS in C57BL/6 mice. The tumor incidence rate of AD3 group was 100%. The whole genome expression microarray data from mouse AOM-DSS model indicated that the mRNA level of RNF152 was gradually decreased during the development of colon cancer. The RT-qPCR results showed that RNF152 mRNA level in AD3 was 1.23±0.18, higher than 0.52±0.08 in negative control (P<0.01). Flow cytometry analysis showed that overexpression of RNF152 increased the apoptosis of RKO cells (P<0.01). The apoptotic rate of RKO-RNF152 cells treated with NO donor DETA NONOate was (31.2±3.1)%, higher than (14.2±2.1)% in RKO-PCDB cells (P<0.001). Overexpression of RNF152 significantly decreased the protein expressions of Bcl-XL and Bcl-2. Conclusion: Downregulation of RNF152 may facilitate the development of CAC by inhibiting the cell apoptosis.

[Analysis of types and treatment methods of cervical massive hemorrhage].

Objective: To summarize the classification and clinical treatment experience of cervical massive hemorrhage in multiple centers. Methods: From April 2012 to October 2020, clinical data of 42 patients with cervical massive hemorrhage were retrospectively analyzed, including 27 cases from Shanghai Changzheng Hospital, 7 cases from Hunan Provincial People's Hospital, 4 cases from Longkou People's Hospital and 4 cases from Laizhou People's Hospital. According to bleeding position (P), bleeding vessel (V), cerebral blood supply (C), and the presence or absence of associated injury (A), 42 patients were classified as "PVCA", and summarize the methods of pre-hospital emergency and in-hospital treatment based on the "ABC" treatment principles: airway rebuild (A), effective arterial hemostasis and bleeding stop (B), and cerebral blood flow reconstruction within the time window (C). Results: Within the 42 cases of cervical massive hemorrhage, there were 3 cases of type P1 (below cricoid cartilage), 28 cases of type P2 (cricoid cartilage-mandibular angle), 11 cases of type P3 (mandibular angle-skull base); 22 cases of type V1 (arterial hemorrhage), 11 cases of type V2 (main venous hemorrhage), 7 cases of type V3 (simple superficial vein or small artery hemorrhage), 2 cases of type V4 (mixed arteriovenous hemorrhage); 5 cases of type C0 (no symptoms of cerebral ischemia and neurological dysfunction), 33 cases of type C1 (transient cerebral ischemia without sensory disturbance), 4 cases of type C2 (symptoms of cerebral ischemia and neurological dysfunction); 39 cases of type A0 (no other system damage was involved) and 3 cases of type A1 (combined with other system damage). All 42 patients received operations, 25 patients received open surgery of vascular reconstruction+hematoma/foreign body removal (7 cases of vascular ligation, 14 cases of direct suture repair, 4 cases of vascular interposition), 17 patients received hybrid surgery (carotid angiography+covered stent repair+hematoma/foreign body removal). The surgical technique success rate the was 100%. All the hemorrhagic shock was corrected, hematoma compression was relieved, and the symptoms of cephalic ischemia were improved. There were 4 cases of local cranial nerve injury, 1 case of incision hematoma and 6 cases of postoperative hyper perfusion. During the average 14.3 months follow-up, there was no operation related myocardial infarction, stroke or death, no re-rupture or re-dissection, and 50% asymptomatic restenosis was found in 1 case one year after received covered stent endovascular repair. Conclusion: Based on the "PVCA" classification and "ABC" treatment principle, it is safe and effective to rescue cervical massive hemorrhage.

Diagnostic potential of urinary monocyte chemoattractant protein-1 for Alzheimer's disease and amnestic mild cognitive impairment.

BACKGROUND AND PURPOSE: The chemokine monocyte chemoattractant protein-1 (MCP-1) is involved in the pathogenesis of Alzheimer's disease (AD). This study aimed to investigate whether urinary MCP-1 can distinguish patients with AD, patients with amnestic mild cognitive impairment (aMCI) and cognitively normal (CN) subjects. METHODS: A total of 754 participants, including 97 patients with AD, 50 patients with aMCI and 84 age- and sex-matched CN controls as well as a cohort of 523 CN subjects of different ages, were enrolled from five hospitals located in different areas of China. Urinary MCP-1 levels were determined using enzyme-linked immunosorbent assays. The correlations between urinary MCP-1 levels and cognition test scores or age were analysed. The optimal diagnostic sensitivity and specificity were determined using receiver operating characteristic curve analysis. RESULTS: In the cohort of CN subjects of different ages, urinary MCP-1 levels increased with ageing and were correlated with age. The urinary MCP-1 levels were higher in females than in males. In the cohort composed of patients with AD, aMCI and age- and sex-matched CN controls, urinary MCP-1 levels were significantly higher in patients with AD and aMCI than in CN controls. There were no differences in urine MCP-1 levels between the AD group and the aMCI group. The urinary MCP-1 levels were correlated with the Mini-Mental State Examination scores and age, and were able to differentiate patients with AD and aMCI from CN subjects. CONCLUSIONS: Urinary MCP-1 is a potential biomarker for the diagnosis of AD and aMCI.

[Visual sensitivity threshold of lateral view of nasolabial Angle changes in edentulous jaw patients].

OBJECTIVE: To study the visual sensitivity threshold of physician's naked eye to the difference of nasolabial angle in edentulous jaw patients, and to provide a reference value for the study of aesthetic evaluation of soft tissue profile for the difference of nasolabial angle that can be recognized by human eyes. METHODS: Three-dimensional facial images of three edentulous patients with different diagnostic dentures introoral were obtained. Lateral screenshots of each patient's three-dimensional facial image with the same scale were obtained by using reverse engineering software (Geomagic studio 2014).The screenshot of the patient's three-dimensional facial image with suitable lip support (The suitable lip support was confirmed by both patients and prosthodontists who had clinical experience for more than 20 years) was taken as the reference picture, and the remaining pictures were grouped with it respectively. All the pictures were observed in random order by the subjects. Fifteen dentists were asked to judge the difference of nasolabial angle between the two pictures of each group on the computer screen. The difference of nasolabial angle between the two pictures in each group was measured and calculated. The ROC curve was drawn, and the best cut-off value was calculated as the visual sensitivity threshold. RESULTS: The data of the 15 subjects were used to draw ROC curves separately. The maximum and minimum best cut-off values were 5.55 degrees and 3.12 degrees respectively. The ROC curve of the whole 15 subjects was drawn after data aggregation, and the best cut-off value was 5.36 degrees (AUC=0.84>0.5, P=0.000<0.05). When the difference of nasolabial angle was above 5.36 degrees, the subjects could recognize it effectively. CONCLUSION: There is a visual limit in the observation of the nasolabial angle with the naked eye. In this study, a visual sensitivity threshold of 5.36 degrees for the difference of the nasolabial angle was obtained. The difference of nasolabial angle below this value can be regarded as no clinical significance. This result provides a reference value for human eyes to recognize the difference of nasolabial angle in soft tissue profile aesthetic evaluation. It can be applied to the aesthetic evaluation of soft tissue profile and can be used as the error level of related research with nasolabial angle as an index for accuracy evaluation.

[Independent innovation research of functionally suitable denture digital system].

Fabrication of conventional complete dentures involves a complex restoration method, requiring significant time and typically involving primary impressions, definitive impressions, jaw relation records, clinic try-in, and complete denture placement, which has been used for nearly a century without change. A novel digital system named Functionally Suitable Denture (FSD) was researched and developed so as to reduce clinical steps, operation difficulties and errors of complete denture restoration. It pioneered a unique diagnostic complete denture aided by computer aided design (CAD) & 3D printing, by which, the functional impression, jaw relation, and try-in (3 steps) were simplified to 1 step, thus the number of visits to the dentist was reduced by 2 times. Moreover, for the first time, it put forward a CAD software of template matching based on the expert design, which was an efficient and intelligent design scheme, and the excellent denture experts' experience and skills could be inherited and iterated. The system included the 3D scanner with appropriate accuracy and high efficiency, the CAD software, the special 3D printer and process software, and the innovative clinical operation process. The Patent Cooperation Treaty (PCT) patent international search report showed that all the 15 claims of the technology were of novelty, creativity and industrial utility. All the digital products were independently developed and made by Peking University School and Hospital of Stomatology, China. The design and manufacture process of denture prosthesis was fast, simple and accurate. At the same time, personalized functional and aesthetic matching of the patients after wearing prosthesis was realized. It effectively solved the global problems of "slow, difficult and inaccurate" of the traditional manual technology of complete denture, and brought good news to edentulous patients. Compared with the traditional complete denture treatment, FSD system has a wide range of applications for different types of edentulous patients, including those with severe resorption of the alveolar ridge or a high occlusal force. Furthermore, the low-cost of 3D printers, compared with expensive milling machines, may make the approach more accessible. This review describes that our research is related to the development of the FSD system, including multi-source data acquisition technology, three generations of complete denture design software, 3D printing systems of individual tray and complete denture pattern, the clinical and laboratory operation process of the FSD system.

[Analysis of drug resistance pattern and genes of Salmonella.spp isolated from human infections in Anhui Province].

Objective: To investigate the drug resistance pattern and drug resistance genotypes of Salmonella. spp isolated from fecal specimens and anal swabs of diarrhea cases in Anhui Province. Methods: The 149 strains of Salmonella.spp isolated from feces and anal swabs of diarrhea cases in Anhui Province from April to October 2017 were selected. The serotypes of Salmonella.spp were identified by slide agglutination. The susceptibility of all strains to 14 antibiotics were determined by micro-broth dilution method. Sixty of the cephalosporin-resistant antibiotics were selected. The ß-lactamase encoding genes bla(TEM), bla(SHV), bla(OXA-1), bla(OXA-2), bla(PER), bla(CMY), bla(CTX-M), and colistin resistance genes mcr-1 and mcr-2 were performed using the multi-PCR method. Results: Of the 149 diarrhea cases, the median (P(25), P(75)) of the age was 5.0 (1.1, 38.5). The 92 of them were male and 54.4% were children. Of the 149 strains of Salmonella.spp, 105 strains had different degrees of resistance to 13 antibiotics other than imipenem. The resistance rate of ampicillin was 55.0% (82/149), which was the highest. 53.0% strains (79 strains) were multidrug resistant, main of which were Salmonella typhimurium and Salmonella enteritidis. A total of 53 resistance patterns were detected, and 10 strains were resistant to ampicillin-ampicillin/sulbactam-tetracycline-chloramphenicol-cefazolin-trimethoprim/sulfamethoxazole, which was the most common resistance pattern. Among the 60 cephalosporin resistant strains, 45 strains carried bla(TEM-1), 6 of which also carried bla(CTX-M-14) and 3 of which also carried bla(CTX-M-65). All the 32 strains carried only bla(TEM-1) show resistance to ampicillin and 31 of them show resistance to cefazolin. There were 2 strains showing negative results of gene detection. mcr-1 was detected in a multidrug resistant strain. Conclusion: The resistance of Salmonella.spp to ampicillin shows a serious situation in this region, and there were a number of multidrug resistant strains. The bla(TEM-1) was the major drug resistance gene detected in this research. Detection of the mcr-1 suggests the emergence of surveillance to colistin resistance of Salmonella.spp in this area.

[Molecular epidemiology of Listeria monocytogenes isolated from ready-to-eat food in 2017 in China].

Objective: To analyze the molecular characteristics of Listeria monocytogenes strains from ready-to eat food in China. Methods: A total of 239 Listeria monocytogenes strains isolated from ready-to-eat food in 2017, all strains underwent whole-genome sequencing (WGS) , and comparisons uncovered population structure derived from lineages, clonal complex, serogroups, antimicrobial susceptibility and virulence, which were inferred in silico from the WGS data. Core genome multilocus sequence typing was used to subtype isolates. Results: All strains were categorized into three different lineages, lineage Ⅱ was the predominant types in food, and IIa was the main serogroups. CC8, CC101 and CC87 were the first three prevalent CCs among 23 detected CCs, accounting for 49.4%. Only 4.6% (11 isolates) of tested strains harbored antibiotic resistance genes, which were mostly trimethoprim genes (7 isolates, 2.9%). All strains were positive for LIPI-1, and only a part of strains harbored LIPI-3 and LIPI-4, accounting for 13.8% (33 isolates) and 14.2% (34 isolates), respectively. ST619 carried both LIPI-3 and LIPI-4. 51.5% (123 isolates) of strains carried SSI-1, and all CC121 strains harbored SSI-2. Different lineages, serogroups and CCs can be separated obviously through cgMLST analysis, and 24 sublineages were highly concordant with CCs. Conclusion: Ⅱa was the main serogroups in ready-to-eat food isolates in China; CC8, CC101 and CC87 were the prevalent CCs, and CC87 isolates was hypervirulent isolates, cgMLST method can be adopted for prospective foodborne disease surveillance and outbreaks detection.

[Ultrasound features and clinical characteristics of intestinal ischemia secondary to acute mesenteric venous thrombosis].

Objective: To examine the ultrasound features and clinical characteristics of the intestinal ischemia secondary to acute mesenteric venous thrombosis (AMVT). Methods: From January 2016 to June 2019, 11 patients were diagnosed as intestinal ischemia secondary to AMVT confirmed by surgical pathology or CT in Peking Union Medical College Hospital. The patients included 7 males and 4 females, aging of (52.8±11.9) years (range: 34 to 81 years).The clinical characters and ultrasound features were retrospectively reviewed. Results: Abdomen pain was the chief complaint of all patients. Other complaints include 2 cases of blood in the stool, 1 case of hematemesis, 2 cases of vomiting, 1 case of diarrhea. Six patients showed rebound pain on physical examination. All patients had elevated white blood cell account and D-Dimer. Nine patients had a thrombosis in the portal vein simultaneously. All 11 patients underwent the CT scan including 10 contrast-enhanced CT. Mesenteric venous thrombosis was detected in 10 cases who underwent contrast-enhanced CT imaging. On CT imaging, 11 patients demonstrated intestinal wall thicken, 5 patients showed intestinal dilation. Eight patients underwent superior mesenteric venous ultrasound examination. Of them, 7 patients were correctly diagnosed as AMVT. Of the 10 patients who underwent abdominal ultrasound, 5 patients showed intestinal lesions including intestinal wall thicken in 4 patients and intestinal dilation in 1 patient. Peritoneal fluid was detected in 10 patients by ultrasound, which was consistent with CT. Ten patients underwent surgical procedures while 1 patient received conservative treatment. Conclusion: Ultrasound is an accurate imaging method in diagnosing superior mesenteric vein thrombosis and can detect intestinal wall thickening, intestinal dilation, and peritoneal fluid.

[The association study of WWP2 gene polymorphisms with delayed encephalopathy after acute carbon monoxide poisoning].

Objective: To investigate the association of WWP2 single nucleotide polymorphism (rs3790088, rs4247109) with delayed encephalopathy after acute carbon monoxide poisoning (DEACMP) , and explore the influences of DEACMP genetic predisposition. Methods: From November 2006 to December 2017, 235 DEACMP cases and 429 acute carbon monoxide poisoning (ACMP) cases were selected. All ACMP patients were followed up for more than 90 days without DEACMP. The DNA in all blood samples were extracted with the blood Genome DNA Extraction Kit. The method of Sequenom Mass Array SNP technique was used to detect the genotype and allele of WWP2. All DEACMP patients were assessed every 3 days after hospitalization by the Hasegawa Dementia Scale (HDS) and Activity of Daily Living Scale (ADL) . The distribution of genotypes in conformty with Hardy-Weinderg law was analyzed by goodness-of-fit χ(2) test, and χ(2) test was used for association analysis. Results: For rs3790088, there were 226 DEACMP cases and 414 ACMP cases. For rs4247109, there were 234 DEACMP cases and 428 ACMP cases. For rs3790088 and rs4247109 in WWP2 gene: there were not significant differences in the gene genotype distribution and allele frequency of both DEACMP group and ACMP group (P>0.05) . According to gender, there were not significant differences in WWP2 gene genotype distribution and allele frequency between two female groups and two male groups (P>0.05) . After analysis by genetic model, the genotype distributions in both DEACMP group and ACMP group were not significantly differences in three genetic models (codominant genetic model, recessive genetic model and dominant genetic model, P>0.05) . Conclusion: It has not confirmed the genetic correlation between the two gene single nucleotide polymorphisms (rs3790088, rs4247109) of WWP2 gene and the incidence of DEACMP.