Cation Bimetallic MOF Anchored Carbon Fiber for Highly Efficient Microwave Absorption.

Carbon fiber (CF) is a potential microwave absorption (MA) material due to the strong dielectric loss. Nevertheless, owing to the high conductivity, poor impedance matching of carbon-based  materials results in limited MA performance. How to solve this problem and achieve excellent MA performance remains a principal challenge. Herein, taking full advantage of CF and excellent impedance matching of bimetallic metal-organic frameworks (MOF) derivatives layer, an excellent microwave absorber based on micron-scale 1D CF and NiCoMOF (CF@NiCoMOF-800) is developed. After adjusting the oxygen vacancies of the bimetallic MOF, the resultant microwave absorber presented excellent MA properties including the minimum reflection loss (RLmin ) of -80.63 dB and wide effective absorption bandwidth (EAB) of 8.01 GHz when its mass percent is only 5 wt.% and the thickness is 2.59 mm. Simultaneously, the mechanical properties of the epoxy resin (EP)-based coating with this microwave absorber are effectively improved. The hardness (H), elastic modulus (E), bending strength, and compressive strength of CF@NiCoMOF-800/EP coating are 334 MPa, 5.56 GPa, 82.2 MPa, and 135.8 MPa, which is 38%, 15%, 106% and 53% higher than EP coating. This work provides a promising solution for carbon materials achieving excellent MA properties and mechanical properties.

Bioinspired Nanolayered Structure Tuned by Extensional Stress: A Scalable Way to High-Performance Biodegradable Polyesters.

The nacre-inspired multi-nanolayer structure offers a unique combination of advanced mechanical properties, such as strength and crack tolerance, making them highly versatile for various applications. Nevertheless, a significant challenge lies in the current fabrication methods, which is difficult to create a scalable manufacturing process with precise control of hierarchical structure. In this work, a novel strategy is presented to regulate nacre-like multi-nanolayer films with the balance mechanical properties of stiffness and toughness. By utilizing a co-continuous phase structure and an extensional stress field, the hierarchical nanolayers is successfully constructed with tunable sizes using a scalable processing technique. This strategic modification allows the robust phase to function as nacre-like platelets, while the soft phase acts as a ductile connection layer, resulting in exceptional comprehensive properties. The nanolayer-structured films demonstrate excellent isotropic properties, including a tensile strength of 113.5 MPa in the machine direction and 106.3 MPa in a transverse direction. More interestingly, these films unprecedentedly exhibit a remarkable puncture resistance at the same time, up to 324.8 N mm-1, surpassing the performance of other biodegradable films. The scalable fabrication strategy holds significant promise in designing advanced bioinspired materials for diverse applications.

A Biomimetic Fibrous Composite Scaffold with Nanotopography-Regulated Mineralization for Bone Defect Repair.

The effective regeneration of large bone defects via bone tissue engineering is challenging due to the difficulty in creating an osteogenic microenvironment. Inspired by the fibrillar architecture of the natural extracellular matrix, we developed a nanoscale bioengineering strategy to produce bone fibril-like composite scaffolds with enhanced osteogenic capability. To activate the surface for biofunctionalization, self-adaptive ridge-like nanolamellae were constructed on poly(ε-caprolactone) (PCL) electrospinning scaffolds via surface-directed epitaxial crystallization. This unique nanotopography with a markedly increased specific surface area offered abundant nucleation sites for Ca2+ recruitment, leading to a 5-fold greater deposition weight of hydroxyapatite than that of the pristine PCL scaffold under stimulated physiological conditions. Bone marrow mesenchymal stem cells (BMSCs) cultured on bone fibril-like scaffolds exhibited enhanced adhesion, proliferation, and osteogenic differentiation in vitro. In a rat calvarial defect model, the bone fibril-like scaffold significantly accelerated bone regeneration, as evidenced by micro-CT, histological histological and immunofluorescence staining. This work provides the way for recapitulating the osteogenic microenvironment in tissue-engineered scaffolds for bone repair.

Antibacterial, Fatigue-Resistant, and Self-Healing Dressing from Natural-Based Composite Hydrogels for Infected Wound Healing.

The treatment of infected wounds faces substantial challenges due to the high incidence and serious infection-related complications. Natural-based hydrogel dressings with favorable antibacterial properties and strong applicability are urgently needed. Herein, we developed a composite hydrogel by constructing multiple networks and loading ciprofloxacin for infected wound healing. The hydrogel was synthesized via a Schiff base reaction between carboxymethyl chitosan and oxidized sodium alginate, followed by the polymerization of the acrylamide monomer. The resultant hydrogel dressing possessed a good self-healing ability, considerable compression strength, and reliable compression fatigue resistance. In vitro assessment showed that the composite hydrogel effectively eliminated bacteria and exhibited an excellent biocompatibility. In a model of Staphylococcus aureus-infected full-thickness wounds, wound healing was significantly accelerated without scars through the composite hydrogel by reducing wound inflammation. Overall, this study opens up a new way for developing multifunctional hydrogel wound dressings to treat wound infections.

Extensional Stress-Induced Ductility of Poly(l-lactide) Films: Role of the Entangled Network in Amorphous Regions.

The relationship between the density of the entangled amorphous network and the ductility of oriented poly(l-lactide) (PLLA) films is explored based on the preferential hydrolysis of the amorphous regions in phosphate buffer solution (PBS). PLLA films with a balance of ductility and stiffness have been prepared by the "casting-annealing stretching" based on mechanical rejuvenation, and the structural evolution and mechanical properties at different hydrolysis durations have been identified. Various stages are found during the transition of ductility to brittleness for hydrolyzed PLLA films. First, the elongation at break for hydrolyzed PLLA films remains unchanged in the first stage of hydrolysis and then gradually decreases. Eventually, the films turn to be brittle in the third stage. The strain-hardening modulus (GR) of the hydrolyzed films is utilized to reflect the density of the entangled amorphous network, and a gradual decrease of GR with hydrolysis time indicates the decisive role of the amorphous entanglement network in the mechanical rejuvenation-induced ductility of PLLA. The quantitative relationship between the entangled amorphous network and the stress-induced ductility of PLLA films is revealed. The dependence of deformation behavior on entangled amorphous network density is closely correlated to activated primary structure during deformation. The intact chain network plays a crucial role in sufficiently activating the primary structure to yield and disentanglement during the subsequent necking. These findings could advance the understanding of the PLLA's ductility induced by mechanical rejuvenation and offer guidance for awakening the intrinsic toughness of PLLA.

Topographic Cues Guiding Cell Polarization via Distinct Cellular Mechanosensing Pathways.

Cell polarization exists in a variety of tissues to regulate cell behaviors and functions. Space constraint (spatially limiting cell extension) and adhesion induction (guiding adhesome growth) are two main ways to induce cell polarization according to the microenvironment topographies. However, the mechanism of cell polarization induced by these two ways and the downstream effects on cell functions are yet to be understood. Here, space constraint and adhesion induction guiding cell polarization are achieved by substrate groove arrays in micro and nano size, respectively. Although the morphology of polarized cells is similar on both structures, the signaling pathways to induce the cell polarization and the downstream functions are distinctly different. The adhesion induction (nano-groove) leads to the formation of focal adhesions and activates the RhoA/ROCK pathway to enhance the myosin-based intracellular force, while the space constraint (micro-groove) only activates the formation of pseudopodia. The enhanced intracellular force caused by adhesion induction inhibits the chromatin condensation, which promotes the osteogenic differentiation of stem cells. This study presents an overview of cell polarization and mechanosensing at biointerface to aid in the design of novel biomaterials.

Reorganization of Hydrogen Bonding in Biobased Polyamide 5,13 under the Thermo-Mechanical Field: Hierarchical Microstructure Evolution and Achieving Excellent Mechanical Performance.

The hierarchical microstructure evolution of an emerging biobased odd-odd polyamide 5,13 (PA5,13) films under the thermo-mechanical field, stepping from hydrogen bond (H-bond) arrangement to the crystalline morphology, has been investigated systematically. It is found that the reorganization of H-bonds under the thermo-mechanical field plays a crucial role in the crystallization of PA5,13. Especially, it is revealed that the crystallization process under the thermo-mechanical field develops along the chain axis direction, while lamellar fragmentation occurs perpendicular to the chain axis. Consequently, a stable and well-organized H-bond arrangement and lengthened lamellae with significant orientation have been constructed. Laudably, an impressive tensile strength of about 500 MPa and modulus of about 4.7 GPa are thus achieved. The present study could provide important guidance for the industrial-scale manufacture of high-performance biobased odd-odd PAs with long polymethylene segment in the dicarboxylic unit combined with a large difference between the polymethylene segments in the dicarboxylic and diamine units.

Velocity mismatch effect on the dynamic MTF of a TDI image sensor.

By analyzing the process of time delay integration dynamic imaging, we establish a model of velocity mismatch. Based on this model, we analyze the influence of different factors on the dynamic imaging process, and a modulation transfer function (MTF) is used to evaluate imaging quality. According to the simulation, the velocity mismatch and scan stage are the main factors for image quality. The MTF of the image sensor decreases with the velocity mismatch, and the scan stage increases. In addition, an image with higher contrast can be obtained in a short integration time. However, a shorter integration time leads to insufficient sampling. Furthermore, we establish a dynamic MTF testing system, and evaluate the experiment at different imaging modes. Through data comparison, the experimental data are consistent with theoretical data.

Interconnected Microdomain Structure of a Cross-Linked Cellulose Nanocomposite Revealed by Micro-Raman Imaging and Its Influence on Water Permeability of a Film.

Substantial adsorption of water vapor triggered by hydrogen-bonding interactions between water molecules and cellulose chains (or nanoplates) is hard to avoid in nanocomposite films, although the addition of nanoplates can improve the oxygen (or carbon dioxide) barrier property. In the present work, an effective strategy is raised to decline adsorption by weakening hydrogen-bonding interactions via chemical cross-linking by epichlorohydrin (ECH) without sacrificing the homogeneous dispersion of nanoplates. The generated microdomain structure of the chemical cross-linking reaction via ECH is explicitly revealed by micro-Raman imaging. Unambiguously, Raman maps of scanning elucidate the distribution and morphology of physical and chemical cross-linking domains quantitatively. The chemical cross-linking domains are nearly uniformly located in the matrix at a low degree of cross-linking, while the interconnected and assembled networks are formed at a high degree of cross-linking. ECH boosts the formation of chemical cross-linking microdomains, bringing out the terrific water vapor barrier property and alleviating the interfacial interactions in penetration, consequently magnifying the water contact angle and holding back the water vapor permeability. Our methodology confers an effective and convenient strategy to obtain remarkable water vapor-resistant cellulose-based films that meet the practical application in the packaging fields.

High Oxidation Stability of Tea Polyphenol-stabilized Highly Crosslinked UHMWPE Under an in Vitro Aggressive Oxidative Condition.

BACKGROUND: Synovial fluid components, especially lipids, can trigger oxidation of ultrahigh-molecular-weight polyethylene (UHMWPE) artificial joint components in vivo. The use of antioxidants such as vitamin E effectively diminishes the oxidative cascade by capturing free radicals and reducing the oxidation potential of UHMWPE implants. Using a thermo-oxidative aging method, we recently found that tea polyphenols can enhance the oxidation resistance of irradiated UHMWPE in comparison with commercial vitamin E. However, it is yet unknown whether tea polyphenols can reduce lipid-induced oxidation. QUESTIONS/PURPOSES: We explored whether tea polyphenol-stabilized UHMWPE would exhibit (1) lower squalene absorption; (2) stronger oxidation resistance; and (3) lower content of free radicals than vitamin E-stabilized UHMWPE under a physiologically-motivated in vitro accelerated-aging model. METHODS: Tea polyphenol (lipid-soluble epigallocatechin gallate [lsEGCG]) and vitamin E were blended with UHMWPE powders followed by compression molding and electron beam irradiation at 100 and 150 kGy. Small cubes (n = 3, 60 mg, 4 × 4 × 4 mm) cut from the blocks were doped in squalene at 60°, 80°, 100°, and 120° C for 2 hours. Gravimetric change of the cubes after squalene immersion was measured to assess absorption. Thin films (n = 3, ∼60 µm) were also microtomed from the blocks and were doped at 120° C for 24 hours. Oxidation induction time (n = 3, 5 mg of material from the cubes) and incipient oxidation temperature (n = 3, thin films) were obtained to determine the oxidation stability. Signal intensity of the free radicals, obtained by electron spin resonance spectroscopy, was used to qualitatively rank the antioxidant ability of vitamin E and lsEGCG. RESULTS: Squalene absorption was comparable between lsEGCG/UHMWPE and vitamin E/UHMWPE at a given temperature and radiation dose. The oxidation induction time of 100 kGy-irradiated UHMWPE was increased with lsEGCG compared with vitamin E except at 120° C. For example, the oxidation induction time value of 100 kGy-irradiated lsEGCG/UHMWPE immersed at 60 C was 25.3 minutes (24.2-27.8 minutes), which was 8.3 minutes longer than that of 100 kGy-irradiated vitamin E/UHMWPE which was 17.0 minutes (15.0-17.1 minutes) (p = 0.040). After squalene immersion at 120° C, the incipient oxidation temperature of 100 and 150 kGy irradiated lsEGCG/UHMWPE was 234° C (227-240° C) and 227° C (225-229° C), which was higher than vitamin E-stabilized counterparts with value of 217° C (214-229° C; p = 0.095) and 216° C (207-218° C; p = 0.040), respectively. The electron spin resonance signal of 150 kGy irradiated lsEGCG/UHMWPE was qualitatively weaker than that of 150 kGy irradiated vitamin E/UHMWPE. CONCLUSIONS: lsEGCG-stabilized UHMWPE demonstrated higher oxidation resistance than vitamin E-stabilized UHMWPE after squalene immersion, likely because lsEGCG donates more protons to eliminate macroradicals than vitamin E. CLINICAL RELEVANCE: Our in vitro findings provide support that lsEGCG may be effective in protecting against oxidation that may be associated with synovial fluid-associated oxidation of highly crosslinked UHMWPE joint replacement components.

Sendai Virus Mucosal Vaccination Establishes Lung-Resident Memory CD8 T Cell Immunity and Boosts BCG-Primed Protection against TB in Mice.

Accumulating evidence has shown the protective role of CD8+ T cells in vaccine-induced immunity against Mycobacterium tuberculosis (Mtb) despite controversy over their role in natural immunity. However, the current vaccine BCG is unable to induce sufficient CD8+ T cell responses, especially in the lung. Sendai virus, a respiratory RNA virus, is here engineered firstly as a novel recombinant anti-TB vaccine (SeV85AB) that encodes Mtb immuno-dominant antigens, Ag85A and Ag85B. A single mucosal vaccination elicited potent antigen-specific T cell responses and a degree of protection against Mtb challenge similar to the effect of BCG in mice. Depletion of CD8+ T cells abrogated the protective immunity afforded by SeV85AB vaccination. Interestingly, only SeV85AB vaccination induced high levels of lung-resident memory CD8+ T (TRM) cells, and this led to a rapid and strong recall of antigen-specific CD8+ T cell responses against Mtb challenge infection. Furthermore, when used in a BCG prime-SeV85AB boost strategy, SeV85AB vaccine significantly enhanced protection above that seen after BCG vaccination alone. Our findings suggest that CD8+ TRM cells that arise in lungs responding to this mucosal vaccination might help to protect against TB, and SeV85AB holds notable promise to improve BCG's protective efficacy in a prime-boost immunization regimen.

A Criterion for Flow-Induced Oriented Crystals in Isotactic Polypropylene under Pressure.

Flow-induced oriented crystals have attracted considerable attention because they significantly increase stiffness and strength of polymer products. Naturally, understanding the necessary condition of forming oriented crystals is of importance for both industry and polymer physics. Following the concept of specific work of flow proposed by Mykhaylyk and co-workers, the expression of the specific work of flow, w (T,P) , was carefully summarized and verified that when w (T,P) is above a critical specific work of flow, w c(T,P) = (1.7 ± 0.7) × 107 J m-3 , oriented crystals in isotactic polypropylene can be induced by flow at pressures (50, 100, and 150 MPa) and at a undercooling of 65 K. The influences of pressure on w c(T,P) stem from two facets: one is the influence on the melt viscosity (the Barus law), and the other one is the influence on the equilibrium melting temperature (the Clapeyron equation). The current study can guide real processing to fabricate high-performance polymer products with oriented crystals.

Structural Hierarchy and Polymorphic Transformation in Shear-Induced Shish-Kebab of Stereocomplex Poly(Lactic Acid).

The realization of hierarchical shish-kebab structures for stereocomplex poly(lactic acid) (PLA) is achieved by the application of a shear flow (100 s(-1) for 1 s) mimicking what can be expected during polymer processing. Compared to the normal shearing scenarios, this transient and strong shear flow enables the creation of dense shish precursors in time- and energy-saving manner. The distribution of crystal form associated with the hierarchical structure is revealed by 2D Fourier transform infrared spectroscopy imaging, creating a unique visualization for both spatial resolution and polymorphism identification. Interestingly, in the shear stereocomplex chains are preferentially extended and crystallized as stable central cores with weak temperature dependence, whereas the development of lateral kebabs is defined by the distinct relation to the crystallization temperature. Below the melting point of homocrystals, both homo and stereocomplex crystallization are engaged in lamellar packing. Above that, exclusive stereocomplex crystals are organized into ordered lamellae. Combining the direct observations at multiscale, the ordered alignment of stereocomplex chains is recognized as the molecular origin of fibrillar extended chain bundles that constitute the central row-nuclei. The proposed hypothesis affords elucidation of shish-kebab formation and unique polymorphism in sheared stereocomplex PLA, which generates opportunities for engendering hierarchically structured PLA with improved performance.

Macromol. Rapid Commun. 9/2016.

Back Cover: The shish-kebab superstructure of poly(lactic acid) stereocomplex was developed in a transient and strong shear flow. The shear-aligned stereocomplex chains were preferentially assembled into the central shish, while the crystal form of the lateral kebabs showed strong dependency on the crystallization temperature. Further details can be found in the article by L. Xie, H. Xu, Z.-M. Li, and M. Hakkarainen* on page 745.

Structural basis for unique hierarchical cylindrites induced by ultrahigh shear gradient in single natural fiber reinforced poly(lactic acid) green composites.

A local shear flow field was feasibly generated by pulling the ramie fiber in single fiber reinforced poly(lactic acid) (PLA) composites. This was featured by an ultrahigh shear gradient with a maximum shear rate up to 1500 s(-1), a level comparable to that frequently occurring during the practical polymer processing. To distinguish shear-induced self-nucleation and ramie fiber-induced heterogeneous nucleation, the shear history was classified by pulling the fiber for 5 s (pulled sample) and pulling out the fiber during 10 s (pulled-out sample), while the static fiber-induced crystallization was carried out as the counterpart. As a result of the ultrahigh shear gradient, the combination of primary shear-induced nucleation in the central region and secondary nucleation in the outer layer assembled the unique hierarchical superstructures. By comparing the architectural configurations of interphases formed in the static, pulled, and pulled-out samples, it was shown that the hierarchical cylindrites underwent the process of self-nucleation driven by the applied shear flow, very different from the formation of fiber-induced transcrystallinity (TC) triggered by the heterogeneous nucleating sites at the static fiber surface. The twisting of transcrystallized lamellae may take place due to the spatial hindrance induced by the incredibly dense nuclei under the intense shearing flow, as observed in the synchrotron X-ray diffraction patterns. The influence of chain characteristics on the crystalline morphology was further explored by adding a small amount of poly(ethylene glycol) (PEG) to enhance the molecular mobility of PLA. It was of interest to find that the existence of PEG not only facilitated the growth rates of TC and cylindrites but also improved the preferential orientation of PLA chains and thus expanded the ordered regions. We unearthed lamellar units that were composed of rich fibrillar extended chain crystals (diameter of 50-80 nm). These results are of importance to shed light on tailoring crystalline morphology for natural fibers reinforced green composite materials. Of immense practical significance, too, is the crystalline evolution that has been tracked in the simple model penetrated with an ultrahigh shear gradient, which researchers have so far been unable to replicate during the practical melt processing, such as extrusion and injection molding.

Unprecedented access to strong and ductile poly(lactic acid) by introducing In Situ Nanofibrillar Poly(butylene succinate) for green packaging.

The notion of toughening poly(lactic acid) (PLA) by adding flexible biopolymers has generated enormous interest but has yielded few desirable advances, mainly blocked by the sacrifice of strength and stiffness due to uncontrollable phase morphology and poor interfacial interactions. Here the phase control methodology, that is, intense extrusion compounding followed by "slit die extrusion-hot stretching-quenching" technique, was proposed to construct well-aligned, stiff poly(butylene succinate) (PBS) nanofibrils in the PLA matrix for the first time. We show that generating nanosized discrete droplets of PBS phase during extrusion compounding is key to enable the development of in situ nanofibrillar PBS assisted by the shearing/stretching field. The size of PBS nanofibrils strongly dependent on the PBS content, showing an increased average diameter from 83 to 116 and 236 nm for the composites containing 10, 20, and 40 wt % nanofibrils, respectively. More importantly, hybrid shish-kebab superstructure anchoring ordered PLA kebabs were induced by the PBS nanofibrils serving as the central shish, conferring the creation of tenacious interfacial crystalline ligaments. The exceptional combination of strength, modulus, and ductility for the composites loaded 40 wt % PBS nanofibrils were demonstrated, outperforming pure PLA with the increments of 31, 51, and 72% in strength, modulus, and elongation at break (56.4 MPa, 1702 MPa, and 92.4%), respectively. The high strength, modulus, and ductility are unprecedented for PLA and are in great potential need for packaging applications.

Electromagnetic interference shielding of segregated polymer composite with an ultralow loading of in situ thermally reduced graphene oxide.

An in situ thermally reduced graphene/polyethylene conductive composite with a segregated structure was fabricated, which achieved a high electromagnetic interference shielding effectiveness of up to 28.3-32.4 dB at an ultralow graphene loading of 0.660 vol.%. Our work suggests a new way of effectively using graphene.

Nano-Topographically Guided, Biomineralized, 3D-Printed Polycaprolactone Scaffolds with Urine-Derived Stem Cells for Promoting Bone Regeneration.

Currently, biomineralization is widely used as a surface modification approach to obtain ideal material surfaces with complex hierarchical nanostructures, morphologies, unique biological functions, and categorized organizations. The fabrication of biomineralized coating for the surfaces of scaffolds, especially synthetic polymer scaffolds, can alter surface characteristics, provide a favorable microenvironment, release various bioactive substances, regulate the cellular behaviors of osteoblasts, and promote bone regeneration after implantation. However, the biomineralized coating fabricated by immersion in a simulated body fluid has the disadvantages of non-uniformity, instability, and limited capacity to act as an effective reservoir of bioactive ions for bone regeneration. In this study, in order to promote the osteoinductivity of 3D-printed PCL scaffolds, we optimized the surface biomineralization procedure by nano-topographical guidance. Compared with biomineralized coating constructed by the conventional method, the nano-topographically guided biomineralized coating possessed more mineral substances and firmly existed on the surface of scaffolds. Additionally, nano-topographically guided biomineralized coating possessed better protein adsorption and ion release capacities. To this end, the present work also demonstrated that nano-topographically guided biomineralized coating on the surface of 3D-printed PCL scaffolds can regulate the cellular behaviors of USCs, guide the osteogenic differentiation of USCs, and provide a biomimetic microenvironment for bone regeneration.

Peelable Microwave Absorption Coating with Reusable and Anticorrosion Merits.

The peelable microwave absorption (MA) coating with reversible adhesion for stable presence on substrates and easy release without any residuals is highly desired in temporary electromagnetic protection, which can quickly enter and disengage the electromagnetic protection state according to the real-time changeable harsh surroundings. On the contrary, with the incorporation of abundant absorbent to achieve excellent MA ability, the tunable adhesion and sufficient cohesion are extremely challenging to fulfill the above requirement. The reported peelable coatings still have problems in controlling adhesion/cohesion strength and coating release, facing substantial residuals after peeling even using complex chemical modification or abundant additives. Herein, a peelable MA coating based on the block characteristics of polar and nonpolar segments of poly(styrene-(ethylene-co-butylene)-styrene) (SEBS) is successfully developed. The polyaniline-decorated carbon nanotube as a microwave absorber plays a positive influence on the adhesion/cohesion of the coating due to bonding interaction. The competitive effective absorption bandwidth (EAB) of 8.8 GHz and controllable yet reversible adhesion release on various substrates and complex surfaces have been achieved. The reusability endows peelable MA coating with 93% retention of EAB even after ten coating-peeling cycles. The coating with excellent chemical and adhesion stability can effectively protect substrates from salt/acid/alkali corrosion, showing over 98% retention of EAB even after 8 h of accelerated corrosion. Our peelable MA coating via a general yet reliable approach provides a prospect for temporary electromagnetic protection.

Hierarchically Biomimetic Scaffolds with Anisotropic Micropores and Nanotopological Patterns to Promote Bone Regeneration via Geometric Modulation.

Structural engineering is an appealing means to modulate osteogenesis without the intervention of exogenous cells or therapeutic agents. In this work, a novel 3D scaffold with anisotropic micropores and nanotopographical patterns is developed. Scaffolds with oriented pores are fabricated via the selective extraction of water-soluble polyethylene oxide from its poly(ε-caprolactone) co-continuous mixture and uniaxial stretching. The plate apatite-like lamellae are subsequently hatched on the pore walls through surface-induced epitaxial crystallization. Such a unique geometric architecture yields a synergistic effect on the osteogenic capability. The prepared scaffold leads to a 19.2% and 128.0% increase in the alkaline phosphatase activity of rat bone mesenchymal stem cells compared to that of the scaffolds with only oriented pores and only nanotopographical patterns, respectively. It also induces the greatest upregulation of osteogenic-related gene expression in vitro. The cranial defect repair results demonstrate that the prepared scaffold effectively promotes new bone regeneration, as indicated by a 350% increase in collagen I expression in vivo compared to the isotropic porous scaffold without surface nanotopology after implantation for 14 weeks. Overall, this work provides geometric motifs for the transduction of biophysical cues in 3D porous scaffolds, which is a promising option for tissue engineering applications.