ABSTRACT
Syngas conversion serves as a gas-to-liquid technology to produce liquid fuels and valuable chemicals from coal, natural gas, or biomass. During syngas conversion, sintering is known to deactivate the catalyst owing to the loss of active surface area. However, the growth of nanoparticles might induce the formation of new active sites such as grain boundaries (GBs) which perform differently from the original nanoparticles. Herein, we reported a unique Cu-based catalyst, Cu nanoparticles with in situ generated GBs confined in zeolite Y (denoted as activated Cu/Y), which exhibited a high selectivity for C5+ hydrocarbons (65.3â C%) during syngas conversion. Such high selectivity for long-chain products distinguished activated Cu/Y from typical copper-based catalysts which mainly catalyze methanol synthesis. This unique performance was attributed to the GBs, while the zeolite assisted the stabilization through spatial confinement. Specifically, the GBs enabled H-assisted dissociation of CO and subsequent hydrogenation into CHx*. CHx* species not only serve as the initiator but also directly polymerize on Cu GBs, known as the carbide mechanism. Meanwhile, the synergy of GBs and their vicinal low-index facets led to the CO insertion where non-dissociative adsorbed CO on low-index facets migrated to GBs and inserted into the metal-alkyl bond for the chain growth.
ABSTRACT
The hydrogenation of CO2 by renewable power-generated hydrogen offers a promising approach to a sustainable carbon cycle. However, the role of water during CO2 hydrogenation is still under debate. Herein, we demonstrated that either too low or too high contents of water hampered the methanol synthesis over Cu/ZnO based catalysts. For Cu single atoms on ZnO supports, the optimal content of water was 0.11â vol. % under 30â bar (CO2 : H2 =1 : 3) at 170 °C. Upon the introduction of optimal-content water, the methanol selectivity immediately became 99.1 %, meanwhile the conversion of CO2 underwent a volcano-type trend with the maximum of 4.9 %. According to mechanistic studies, water acted as a bridge between H atoms and CO2 /intermediates, facilitating the transformation of COOH* and CH2 O*. The enhanced activity induced the generation of more water to react with CO via water-gas shift reaction, resulting in the increase in methanol selectivity.
ABSTRACT
Extra-heavy olefins (C12+=), feedstocks to synthesize a wide range of value-added products, are conventionally generated from fossil resources via energy-intensive wax cracking or multi-step processes. Fischer-Tropsch synthesis with sustainably obtained syngas as feed-in provides a potential way to produce C12+=, though there is a trade-off between enhancing C-C coupling and suppressing further hydrogenation of olefins. Herein, we achieve selective production of C12+= via the overall conversion of CO and water, denoted as Kölbel-Engelhardt synthesis (KES), in polyethylene glycol (PEG) over a mixture of Pt/Mo2N and Ru particles. KES provides a continuously high CO/H2 ratio, thermodynamically favoring chain propagation and olefin formation. PEG serves as a selective extraction agent to hinder hydrogenation of olefins. Under an optimal condition, the yield ratio of CO2 to hydrocarbons reaches the theoretical minimum, and the C12+= yield reaches its maximum of 1.79 mmol with a selectivity (among hydrocarbons) of as high as 40.4%.
ABSTRACT
The conversion of CO2 by renewable power-generated hydrogen is a promising approach to a sustainable production of long-chain olefins (C4+=) which are currently produced from petroleum resources. The decentralized small-scale electrolysis for hydrogen generation requires the operation of CO2 hydrogenation in ambient-pressure units to match the manufacturing scales and flexible on-demand production. Herein, we report a Cu-Fe catalyst which is operated under ambient pressure with comparable C4+= selectivity (66.9%) to that of the state-of-the-art catalysts (66.8%) optimized under high pressure (35 bar). The catalyst is composed of copper, iron oxides, and iron carbides. Iron oxides enable reverse-water-gas-shift to produce CO. The synergy of carbide path over iron carbides and CO insertion path over interfacial sites between copper and iron carbides leads to efficient C-C coupling into C4+=. This work contributes to the development of small-scale low-pressure devices for CO2 hydrogenation compatible with sustainable hydrogen production.
ABSTRACT
Red phosphorus (P) has attracted intense attention as promising anode material for high-energy density sodium-ion batteries (NIBs), owing to its high sodium storage theoretical capacity (2595 mAh g-1 ). Nevertheless, natural insulating property and large volume variation of red P during cycling result in extremely low electrochemical activity, leading to poor electrochemical performance. Herein, the authors demonstrate a rational strategy to improve sodium storage performance of red P by confining nanosized amorphous red P into zeolitic imidazolate framework-8 (ZIF-8) -derived nitrogen-doped microporous carbon matrix (denoted as P@N-MPC). When used as anode for NIBs, the P@N-MPC composite displays a high reversible specific capacity of ≈600 mAh g-1 at 0.15 A g-1 and improved rate capacity (≈450 mAh g-1 at 1 A g-1 after 1000 cycles with an extremely low capacity fading rate of 0.02% per cycle). The superior sodium storage performance of the P@N-MPC is mainly attributed to the novel structure. The N-doped porous carbon with sub-1 nm micropore facilitates the rapid diffusion of organic electrolyte ions and improves the conductivity of the encapsulated red P. Furthermore, the porous carbon matrix can buffer the volume change of red P during repeat sodiation/desodiation process, keeping the structure intact after long cycle life.