ABSTRACT
We report hydroboration of carbodiimide and isocyanate substrates catalyzed by a cyclic carbodiphosphorane catalyst. The cyclic carbodiphosphorane outperformed the other Lewis basic carbon species tested, including other zerovalent carbon compounds, phosphorus ylides, an N-heterocyclic carbene, and an N-heterocyclic olefin. Hydroborations of seven carbodiimides and nine isocyanates were performed at room temperature to form N-boryl formamidine and N-boryl formamide products. Intermolecular competition experiments demonstrated the selective hydroboration of alkyl isocyanates over carbodiimide and ketone substrates. DFT calculations support a proposed mechanism involving activation of pinacolborane by the carbodiphosphorane catalyst, followed by hydride transfer and B-N bond formation.
ABSTRACT
Definitive treatment of supraventricular tachycardia (SVT) substrate involves catheter ablation. While objective success rates have been well established, long-term subjective patient experiences have not been well described. We quantify a subjective cure rate and characterize long-term patient experience after acutely successful ablation. A cross-sectional survey of pediatric patients with accessory pathways or atrioventricular nodal reentrant tachycardia who underwent acutely successful ablation from 2008 to 2012 was performed. Data were obtained from medical records and patient surveys. Patients with congenital heart disease other than patent ductus arteriosus, patent foramen ovale, or coronary artery abnormalities were excluded. Statistical analyses included Student's t-test and χ2 analysis for continuous and categorical variables, respectively. Surveys were sent to 153 patients of which 147 responded with median follow-up of 7.2 (IQR 6.1-8.5) years. Of the 147 responders, 124 (84%) patients reported cure with a male predominance. Symptoms were present in 130/147 (88%) patients pre-ablation and in 53/147 (36%) post-ablation. Among those with post-ablation symptoms, 50/53 (94%) reported symptomatic improvement. Recurrence occurred in 23/147 (16%) patients and was more prevalent following cryoablation. Ablation of SVT substrate can be curative with excellent long-term results and patient satisfaction. Long-term subjective cure rate is high and there is a substantial decrease in symptoms post-ablation. Many patients continue to have symptoms following ablation; however, the majority of these patients consider themselves cured and symptoms can be attributed to other etiologies. Recurrence is uncommon and occurs more frequently following cryoablation.
Subject(s)
Catheter Ablation/methods , Patient Outcome Assessment , Tachycardia, Supraventricular/surgery , Accessory Atrioventricular Bundle/surgery , Adolescent , Child , Child, Preschool , Cross-Sectional Studies , Cryosurgery/methods , Electrocardiography , Female , Follow-Up Studies , Humans , Male , Recurrence , Surveys and Questionnaires , Tachycardia, Atrioventricular Nodal Reentry/surgery , Time Factors , Treatment Outcome , Young AdultABSTRACT
Second-generation ruthenium olefin metathesis catalysts bearing aminophosphine ligands were investigated with systematic variation of the ligand structure. The rates of phosphine dissociation ( k1; initiation rate) and relative phosphine reassociation ( k-1) were determined for two series of catalysts bearing cyclohexyl(morpholino)phosphine and cyclohexyl(piperidino)phosphine ligands. In both cases, incorporating P-N bonds into the architecture of the dissociating phosphine accelerates catalyst initiation relative to the parent [Ru]-PCy3 complex; however, this effect is muted for the tris(amino)phosphine-ligated complexes, which exhibit higher ligand binding constants in comparison to those with phosphines containing one or two cyclohexyl substituents. These results, along with X-ray crystallographic data and DFT calculations, were used to understand the influence of ligand structure on catalyst activity. Especially noteworthy is the application of phosphines containing incongruent substituents (PR1R'2); detailed analyses of factors affecting ligand dissociation, including steric effects, inductive effects, and ligand conformation, are presented. Computational studies of the reaction coordinate for ligand dissociation reveal that ligand conformational changes contribute to the rapid dissociation for the fastest-initiating catalyst of these series, which bears a cyclohexyl-bis(morpholino)phosphine ligand. Furthermore, the effect of amine incorporation was examined in the context of ring-opening metathesis polymerization, and reaction rates were found to correlate well with catalyst initiation rates. The combined experimental and computational studies presented in this report reveal important considerations for designing efficient ruthenium olefin metathesis catalysts.
ABSTRACT
Control over polymer sequence and architecture is crucial to both understanding structure-property relationships and designing functional materials. In pursuit of these goals, we developed a new synthetic approach that enables facile manipulation of the density and distribution of grafts in polymers via living ring-opening metathesis polymerization (ROMP). Discrete endo,exo-norbornenyl dialkylesters (dimethyl DME, diethyl DEE, di-n-butyl DBE) were strategically designed to copolymerize with a norbornene-functionalized polystyrene (PS), polylactide (PLA), or polydimethylsiloxane (PDMS) macromonomer mediated by the third-generation metathesis catalyst (G3). The small-molecule diesters act as diluents that increase the average distance between grafted side chains, generating polymers with variable grafting density. The grafting density (number of side chains/number of norbornene backbone repeats) could be straightforwardly controlled by the macromonomer/diluent feed ratio. To gain insight into the copolymer sequence and architecture, self-propagation and cross-propagation rate constants were determined according to a terminal copolymerization model. These kinetic analyses suggest that copolymerizing a macromonomer/diluent pair with evenly matched self-propagation rate constants favors randomly distributed side chains. As the disparity between macromonomer and diluent homopolymerization rates increases, the reactivity ratios depart from unity, leading to an increase in gradient tendency. To demonstrate the effectiveness of our method, an array of monodisperse polymers (PLAx-ran-DME1-x)n bearing variable grafting densities (x = 1.0, 0.75, 0.5, 0.25) and total backbone degrees of polymerization (n = 167, 133, 100, 67, 33) were synthesized. The approach disclosed in this work therefore constitutes a powerful strategy for the synthesis of polymers spanning the linear-to-bottlebrush regimes with controlled grafting density and side chain distribution, molecular attributes that dictate micro- and macroscopic properties.
ABSTRACT
Grafting density and graft distribution impact the chain dimensions and physical properties of polymers. However, achieving precise control over these structural parameters presents long-standing synthetic challenges. In this report, we introduce a versatile strategy to synthesize polymers with tailored architectures via grafting-through ring-opening metathesis polymerization (ROMP). One-pot copolymerization of an ω-norbornenyl macromonomer and a discrete norbornenyl comonomer (diluent) provides opportunities to control the backbone sequence and therefore the side chain distribution. Toward sequence control, the homopolymerization kinetics of 23 diluents were studied, representing diverse variations in the stereochemistry, anchor groups, and substituents. These modifications tuned the homopolymerization rate constants over 2 orders of magnitude (0.36 M-1 s-1 < khomo < 82 M-1 s-1). Rate trends were identified and elucidated by complementary mechanistic and density functional theory (DFT) studies. Building on this foundation, complex architectures were achieved through copolymerizations of selected diluents with a poly(d,l-lactide) (PLA), polydimethylsiloxane (PDMS), or polystyrene (PS) macromonomer. The cross-propagation rate constants were obtained by nonlinear least-squares fitting of the instantaneous comonomer concentrations according to the Mayo-Lewis terminal model. In-depth kinetic analyses indicate a wide range of accessible macromonomer/diluent reactivity ratios (0.08 < r1/r2 < 20), corresponding to blocky, gradient, or random backbone sequences. We further demonstrated the versatility of this copolymerization approach by synthesizing AB graft diblock polymers with tapered, uniform, and inverse-tapered molecular "shapes." Small-angle X-ray scattering analysis of the self-assembled structures illustrates effects of the graft distribution on the domain spacing and backbone conformation. Collectively, the insights provided herein into the ROMP mechanism, monomer design, and homo- and copolymerization rate trends offer a general strategy for the design and synthesis of graft polymers with arbitrary architectures. Controlled copolymerization therefore expands the parameter space for molecular and materials design.
ABSTRACT
Brush block copolymers are a class of comb polymers that feature polymeric side chains densely grafted to a linear backbone. These polymers display interesting properties due to their dense functionality, low entanglement, and ability to rapidly self-assemble to highly ordered nanostructures. The ability to prepare brush polymers with precise structures has been enabled by advancements in controlled polymerization techniques. This Feature Article highlights the development of brush block copolymers as photonic crystals that can reflect visible to near-infrared wavelengths of light. Fabrication of these materials relies on polymer self-assembly processes to achieve nanoscale ordering, which allows for the rapid preparation of photonic crystals from common organic chemical feedstocks. The characteristic physical properties of brush block copolymers are discussed, along with methods for their preparation. Strategies to induce self-assembly at ambient temperatures and the use of blending techniques to tune photonic properties are emphasized.
Subject(s)
Photochemistry/methods , Polymers/chemical synthesis , Light , Nanostructures/chemistry , Photons , Polymerization , Polymers/chemistryABSTRACT
Hydrosilation reactions represent an important class of chemical transformations and there has been considerable recent interest in expanding the scope of these reactions by developing new catalysts. A major theme to emerge from these investigations is the development of catalysts with electrophilic character that transfer electrophilicity to silicon by Si-H activation. This type of mechanism has been proposed for catalysts ranging from Groupâ 4 transition metals to Groupâ 15 main group species. Additionally, other electrophilic silicon species, such as silylene complexes and η3 -H2 SiRR' complexes, have been identified as intermediates in hydrosilation reactions. In this Review, different types of catalysts are compared to highlight the range of hydrosilation mechanisms that feature electrophilic silicon centers. The importance of these catalysts to the development of new hydrosilation reactions is also discussed.
ABSTRACT
Complexes [PhBP3]RuH(η(3)-H2SiRR') (RR' = Me,Ph, 1a; RR' = Ph2, 1b; RR' = Et2, 1c) react with XylNC to form carbene complexes [PhBP3]Ru(H)â[C(H)(N(Xyl)(η(2)-H-SiRR'))] (2a-c; previously reported for 2a,b). Reactions of 1a-c with XylNC were further investigated to assess how metal complexes with multiple M-H-Si bonds can mediate transformations of unsaturated substrates. Complex 2a eliminates an N-methylsilacycloindoline product (3a) that results from hydrosilylation, hydrogenation, and benzylic C-H activation of XylNC. Turnover was achieved in a pseudocatalytic manner by careful control of the reaction conditions. Complex 1c mediates a catalytic isocyanide reductive coupling to furnish an alkene product (4) in a transformation that has precedent only in stoichiometric processes. The formations of 3a and 4 were investigated with deuterium labeling experiments, KIE and other kinetic studies, and by examining the reactivity of XylNC with an η(3)-H2SiMeMes complex (1d) to form a C-H activated complex (6). Complex 6 serves as a model for an intermediate in the formation of 3a, and NMR investigations at -30 °C reveal that 6 forms via a carbene complex (1d) that isomerizes to aminomethyl complex 7d. These investigations reveal that the formations of 3a and 4 involve multiple 4-, 5-, and 6-coordinate silicon species with 0, 1, 2, or 3 Ru-H-Si bonds. These mechanisms demonstrate exceptionally intricate roles for silicon in transition-metal-catalyzed reactions with a silane reagent.
ABSTRACT
Bis(perfluorocatecholato)silane Si(cat(F))2 was prepared, and stoichiometric binding to Lewis bases was demonstrated with fluoride, triethylphosphine oxide, and N,N'-diisopropylbenzamide. The potent Lewis acidity of Si(cat(F))2 was suggested from catalytic hydrosilylation and silylcyanation reactions with aldehydes. Mechanistic studies of hydrosilylation using an optically active silane substrate, R-(+)-methyl-(1-naphthyl)phenylsilane, proceeded with predominant stereochemical retention at silicon, consistent with a carbonyl activation pathway. The enantiospecificity was dependent on solvent and salt effects, with increasing solvent polarity or addition of NBu4BAr(F)4 leading to a diminished enantiomeric ratio. The medium effects are consistent with an ionic mechanism, wherein hydride transfer occurs prior to silicon-oxygen bond formation.
Subject(s)
Aldehydes/chemistry , Fluorocarbons/chemistry , Lewis Acids/chemistry , Silanes/chemistry , Silicon Compounds/chemistry , Catalysis , Catechols/chemistry , Models, Molecular , StereoisomerismABSTRACT
Galactic cosmic radiation (GCR) is one of the most serious risks posed to astronauts during missions to the Moon and Mars. Experimental models capable of recapitulating human physiology are critical to understanding the effects of radiation on human organs and developing radioprotective measures against space travel exposures. The effects of systemic radiation are studied using a multi-organ-on-a-chip (multi-OoC) platform containing engineered tissue models of human bone marrow (site of hematopoiesis and acute radiation damage), cardiac muscle (site of chronic radiation damage) and liver (site of metabolism), linked by vascular circulation with an endothelial barrier separating individual tissue chambers from the vascular perfusate. Following protracted neutron radiation, the most damaging radiation component in deep space, a greater deviation of tissue function is observed as compared to the same cumulative dose delivered acutely. Further, by characterizing engineered bone marrow (eBM)-derived immune cells in circulation, 58 unique genes specific to the effects of protracted neutron dosing are identified, as compared to acutely irradiated and healthy tissues. It propose that this bioengineered platform allows studies of human responses to extended radiation exposure in an "astronaut-on-a-chip" model that can inform measures for mitigating cosmic radiation injury.
ABSTRACT
Systemic lupus erythematosus (SLE) is a heterogenous autoimmune disease that affects multiple organs, including the heart. The mechanisms of myocardial injury in SLE remain poorly understood. In this study, we engineered human cardiac tissues and cultured them with IgG from patients with SLE, with and without myocardial involvement. IgG from patients with elevated myocardial inflammation exhibited increased binding to apoptotic cells within cardiac tissues subjected to stress, whereas IgG from patients with systolic dysfunction exhibited enhanced binding to the surface of live cardiomyocytes. Functional assays and RNA sequencing revealed that, in the absence of immune cells, IgG from patients with systolic dysfunction altered cellular composition, respiration and calcium handling. Phage immunoprecipitation sequencing (PhIP-seq) confirmed distinctive IgG profiles between patient subgroups. Coupling IgG profiling with cell surfaceome analysis identified four potential pathogenic autoantibodies that may directly affect the myocardium. Overall, these insights may improve patient risk stratification and inform the development of new therapeutic strategies.
ABSTRACT
Systemic lupus erythematosus (SLE) is a highly heterogenous autoimmune disease that affects multiple organs, including the heart. The mechanisms by which myocardial injury develops in SLE, however, remain poorly understood. Here we engineered human cardiac tissues and cultured them with IgG fractions containing autoantibodies from SLE patients with and without myocardial involvement. We observed unique binding patterns of IgG from two patient subgroups: (i) patients with severe myocardial inflammation exhibited enhanced binding to apoptotic cells within cardiac tissues subjected to stress, and (ii) patients with systolic dysfunction exhibited enhanced binding to the surfaces of viable cardiomyocytes. Functional assays and RNA sequencing (RNA-seq) revealed that IgGs from patients with systolic dysfunction exerted direct effects on engineered tissues in the absence of immune cells, altering tissue cellular composition, respiration and calcium handling. Autoantibody target characterization by phage immunoprecipitation sequencing (PhIP-seq) confirmed distinctive IgG profiles between patient subgroups. By coupling IgG profiling with cell surface protein analyses, we identified four pathogenic autoantibody candidates that may directly alter the function of cells within the myocardium. Taken together, these observations provide insights into the cellular processes of myocardial injury in SLE that have the potential to improve patient risk stratification and inform the development of novel therapeutic strategies.
ABSTRACT
A strategy for the control of electron density at a metal center is reported, which uses a remote chemical switch involving second-sphere Lewis acid binding that modulates electron density in the first coordination sphere. Binding of the Lewis acid B(C6F5)3 at remote nitrogen positions of a bipyrazine-diarylplatinum(II) complex accelerates biaryl reductive elimination by a factor of 64,000.
Subject(s)
Lewis Acids/chemistry , Organoplatinum Compounds/chemistry , Pyrazines/chemistry , Molecular Structure , Oxidation-ReductionABSTRACT
Cosmic radiation is the most serious risk that will be encountered during the planned missions to the Moon and Mars. There is a compelling need to understand the effects, safety thresholds, and mechanisms of radiation damage in human tissues, in order to develop measures for radiation protection during extended space travel. As animal models fail to recapitulate the molecular changes in astronauts, engineered human tissues and "organs-on-chips" are valuable tools for studying effects of radiation in vitro. We have developed a bioengineered tissue platform for studying radiation damage in individualized settings. To demonstrate its utility, we determined the effects of radiation using engineered models of two human tissues known to be radiosensitive: engineered cardiac tissues (eCT, a target of chronic radiation damage) and engineered bone marrow (eBM, a target of acute radiation damage). We report the effects of high-dose neutrons, a proxy for simulated galactic cosmic rays, on the expression of key genes implicated in tissue responses to ionizing radiation, phenotypic and functional changes in both tissues, and proof-of-principle application of radioprotective agents. We further determined the extent of inflammatory, oxidative stress, and matrix remodeling gene expression changes, and found that these changes were associated with an early hypertrophic phenotype in eCT and myeloid skewing in eBM. We propose that individualized models of human tissues have potential to provide insights into the effects and mechanisms of radiation during deep-space missions and allow testing of radioprotective measures.
Subject(s)
Cosmic Radiation , Humans , Biomedical Engineering , Cosmic Radiation/adverse effects , HypertrophyABSTRACT
Many neuromuscular diseases, such as myasthenia gravis (MG), are associated with dysfunction of the neuromuscular junction (NMJ), which is difficult to characterize in animal models due to physiological differences between animals and humans. Tissue engineering offers opportunities to provide in vitro models of functional human NMJs that can be used to diagnose and investigate NMJ pathologies and test potential therapeutics. By incorporating optogenetic proteins into induced pluripotent stem cells (iPSCs), we generated neurons that can be stimulated with specific wavelengths of light. If the NMJ is healthy and functional, a neurochemical signal from the motoneuron results in muscle contraction. Through the integration of optogenetics and microfabrication with tissue engineering, we established an unbiased and automated methodology for characterizing NMJ function using video analysis. A standardized protocol was developed for NMJ formation, optical stimulation with simultaneous video recording, and video analysis of tissue contractility. Stimulation of optogenetic motoneurons by light to induce skeletal muscle contractions recapitulates human NMJ physiology and allows for repeated functional measurements of NMJ over time and in response to various inputs. We demonstrate this platform's ability to show functional improvements in neuromuscular connectivity over time and characterize the damaging effects of patient MG antibodies or neurotoxins on NMJ function.
Subject(s)
Neuromuscular Junction , Optogenetics , Animals , Engineering , Humans , Motor Neurons , Muscle ContractionABSTRACT
The structure of the title compound, C27H46N2, at 93â K has monoclinic (P21/n) symmetry. The title compound was prepared by treatment of 2-(2,6-diiso-propyl-phenyl)-3,3-dimethyl-2-aza-spiro-[4.5]dec-1-en-2-ium hydrogen dichloride with two equivalents of lithium di-ethyl-amide. Characterization of the title compound by single-crystal X-ray diffraction and 1H and 13C NMR spectroscopy is presented. Formation of the di-ethyl-amine adduct of the cyclic(alk-yl)(amino)-carbene (CAAC) was unexpected, as deprotonation using lithium diiso-propyl-amide results in free CAAC formation.
ABSTRACT
The self-assembly of poly(dimethylsiloxane)-b-poly(trimethylene carbonate) (PDMS-b-PTMC) bottlebrush block polymers was investigated under different processing conditions. Small-angle X-ray scattering (SAXS) and UV/Visible spectroscopy provided insight into the self-assembly and structure in response to heating and applied pressure. In the absence of applied pressure (i.e., before annealing), the PDMS-b-PTMC bottlebrush block polymers are white solids and adopt small, randomly oriented lamellar grains. Heating the materials to 140 °C in the absence of applied pressure appears to "lock in" the isotropic, short-range-ordered state, preventing the formation of the long-range-ordered lamellar structure responsible for photonic properties. Applying modest anisotropic pressure (3 psi) between parallel plates at ambient temperature orients the short-range lamellar grains; however, applied pressure alone does not produce long-range order. Only when the bottlebrush block polymers were heated (>100 °C) under modest pressure (3 psi) were long-range-ordered photonic crystals formed. Analysis of the SAXS data motivated analogies to liquid crystals and revealed the potential self-assembly pathway. These results provide insight into the structure and self-assembly of bottlebrush block polymers with low glass transition temperature side chains in response to different processing conditions.
ABSTRACT
Z-type interactions between bis(perfluorophenyl)zinc and platinum(ii) diaryl complexes supported by 1,10-phenanthroline (phen), 2,2'-bipyridine (bpy), and bis(dimethylphosphino)ethane (dmpe) ligands are reported. In the solid state, the nature of the Pt-Zn interaction depends on the bidentate ligand; the phen-supported complex exhibits an unsupported Pt-Zn bond, while the dmpe derivative features additional bridging aryl interactions. A strongly accelerated rate of reductive elimination is observed for phen- and bpy-supported complexes, while aryl exchange between Pt and Zn is observed for the dmpe complex.
Subject(s)
Coordination Complexes/chemistry , Lewis Acids/chemistry , Lewis Bases/chemistry , Zinc/chemistry , 2,2'-Dipyridyl/chemistry , Crystallography, X-Ray , Ligands , Models, Chemical , Oxidation-Reduction , Phenanthrolines/chemistry , Phosphines/chemistry , Proton Magnetic Resonance SpectroscopyABSTRACT
OBJECTIVE: To report a case of esophageal cancer in an adult patient with cystic fibrosis (CF) and review the relationship between these 2 diseases. CASE REPORT: A 40-year-old man with CF presented with worsening epigastric pain, weight loss, and upper gastrointestinal (GI) bleeding. Endoscopy revealed innumerable masses in the distal esophagus. The workup revealed esophageal adenocarcinoma metastatic to the liver and the lungs. DISCUSSION: Abnormal mucous secretions in CF patients impair the innate GI mucosal barriers. The incidence of both gastroesophageal reflux disease and GI malignancies is higher in patients with CF. Patients with CF now survive long enough to potentially experience the consequences of long-term acid exposure, including esophagitis, Barrett esophagus, and esophageal cancer. CONCLUSION: Our case report adds to a small but growing body of evidence that CF is a significant risk factor for GI malignancies, including esophageal adenocarcinoma. Controlled studies are needed to determine whether a causal relationship truly exists.
ABSTRACT
An ion chromatography method with non-suppressed conductivity detection was developed for the simultaneous determination of methylamines (methylamine, dimethylamine, trimethylamine) and trimethylamine-N-oxide in particulate matter air samples. The analytes were well separated by means of cation-exchange chromatography using a 3 mM nitric acid/3.5% acetonitrile (v/v) eluent solution and a Metrosep C 2 250 (250 mm x 4 mm i.d.) separation column. The effects of the different chromatographic parameters on the separation were also investigated. Detection limits of methylamine, dimethylamine, trimethylamine, and trimethylamine-N-oxide were 43, 46, 76 and 72 microg/L, respectively. The relative standard deviations of the retention times were between 0.42% and 1.14% while the recoveries were between 78.8% and 88.3%. The method is suitable for determining if methylamines and trimethylamine-N-oxide are a significant component of organic nitrogen aerosol in areas with high concentration of these species.