ABSTRACT
BACKGROUND: Different types of analytical methods, with different characteristics, are applied in metabolomics and lipidomics research and include untargeted, targeted and semi-targeted methods. Ultra High Performance Liquid Chromatography-Mass Spectrometry is one of the most frequently applied measurement instruments in metabolomics because of its ability to detect a large number of water-soluble and lipid metabolites over a wide range of concentrations in short analysis times. Methods applied for the detection and quantification of metabolites differ and can either report a (normalised) peak area or an absolute concentration. AIM OF REVIEW: In this tutorial we aim to (1) define similarities and differences between different analytical approaches applied in metabolomics and (2) define how amounts or absolute concentrations of endogenous metabolites can be determined together with the advantages and limitations of each approach in relation to the accuracy and precision when concentrations are reported. KEY SCIENTIFIC CONCEPTS OF REVIEW: The pre-analysis knowledge of metabolites to be targeted, the requirement for (normalised) peak responses or absolute concentrations to be reported and the number of metabolites to be reported define whether an untargeted, targeted or semi-targeted method is applied. Fully untargeted methods can only provide (normalised) peak responses and fold changes which can be reported even when the structural identity of the metabolite is not known. Targeted methods, where the analytes are known prior to the analysis, can also report fold changes. Semi-targeted methods apply a mix of characteristics of both untargeted and targeted assays. For the reporting of absolute concentrations of metabolites, the analytes are not only predefined but optimized analytical methods should be developed and validated for each analyte so that the accuracy and precision of concentration data collected for biological samples can be reported as fit for purpose and be reviewed by the scientific community.
Subject(s)
Mass Spectrometry , Metabolomics , Metabolomics/methods , Chromatography, High Pressure Liquid/methods , Mass Spectrometry/methods , HumansABSTRACT
The US National Institute of Standards and Technology (NIST) developed a Standard Reference Material® (SRM®) 3949 Folate Vitamers in Frozen Human Serum to replace SRM 1955 Homocysteine and Folate in Human Serum. The presence of increased endogenous levels of folic acid and 5-methyltetrahydrofolate (5mTHF) in SRM 3949, enhanced folate stability via addition of ascorbic acid, and inclusion of values for additional minor folates are improvements over SRM 1955 that should better serve the clinical folate measurement community. The new SRM contains folates at three levels. To produce SRM 3949, pilot sera were collected from 15 individual donors, 5 of whom were given a 400-µg folic acid supplement 1 h prior to blood draw to increase serum levels of 5mTHF and folic acid for the high-level material. To stabilize the folates, 0.5% (mass concentration) ascorbic acid was added as soon as possible after preparation of serum. These pilot sera were screened for five folates plus the pyrazino-s-triazine derivative of 4-α-hydroxy-5-methyltetrahydrofolate (MeFox) at the US Centers for Disease Control and Prevention (CDC) by isotope dilution liquid chromatography-tandem mass spectrometry (ID-LC-MS/MS). Based on these results, a blending protocol was specified to obtain the three desired folate concentrations for SRM 3949. ID-LC-MS/MS analysis at the CDC and NIST was utilized to assign values for folic acid and 5mTHF, as well as several minor folates.
Subject(s)
Folic Acid , Tandem Mass Spectrometry , Humans , Folic Acid/analysis , Chromatography, Liquid/methods , Tandem Mass Spectrometry/methods , Reference Standards , Ascorbic AcidABSTRACT
INTRODUCTION: The metabolomics quality assurance and quality control consortium (mQACC) is enabling the identification, development, prioritization, and promotion of suitable reference materials (RMs) to be used in quality assurance (QA) and quality control (QC) for untargeted metabolomics research. OBJECTIVES: This review aims to highlight current RMs, and methodologies used within untargeted metabolomics and lipidomics communities to ensure standardization of results obtained from data analysis, interpretation and cross-study, and cross-laboratory comparisons. The essence of the aims is also applicable to other 'omics areas that generate high dimensional data. RESULTS: The potential for game-changing biochemical discoveries through mass spectrometry-based (MS) untargeted metabolomics and lipidomics are predicated on the evolution of more confident qualitative (and eventually quantitative) results from research laboratories. RMs are thus critical QC tools to be able to assure standardization, comparability, repeatability and reproducibility for untargeted data analysis, interpretation, to compare data within and across studies and across multiple laboratories. Standard operating procedures (SOPs) that promote, describe and exemplify the use of RMs will also improve QC for the metabolomics and lipidomics communities. CONCLUSIONS: The application of RMs described in this review may significantly improve data quality to support metabolomics and lipidomics research. The continued development and deployment of new RMs, together with interlaboratory studies and educational outreach and training, will further promote sound QA practices in the community.
Subject(s)
Lipidomics , Metabolomics , Mass Spectrometry/methods , Metabolomics/methods , Quality Control , Reproducibility of ResultsABSTRACT
INTRODUCTION: To date, there has been little effort to develop standards for metabolome-based gut microbiome measurements despite the significant efforts toward standard development for DNA-based microbiome measurements. OBJECTIVES: The National Institute of Standards and Technology (NIST), The BioCollective (TBC), and the North America Branch of the International Life Sciences Institute (ILSI North America) are collaborating to extend NIST's efforts to develop a Human Whole Stool Reference Material for the purpose of method harmonization and eventual quality control. METHODS: The reference material will be rationally designed for adequate quality assurance and quality control (QA/QC) for underlying measurements in the study of the impact of diet and nutrition on functional aspects of the host gut microbiome and relationships of those functions to health. To identify which metabolites deserve priority in their value assignment, NIST, TBC, and ILSI North America jointly conducted a workshop on September 12, 2019 at the NIST campus in Gaithersburg, Maryland. The objective of the workshop was to identify metabolites for which evidence indicates relevance to health and disease and to decide on the appropriate course of action to develop a fit-for-purpose reference material. RESULTS: This document represents the consensus opinions of workshop participants and co-authors of this manuscript, and provides additional supporting information. In addition to developing general criteria for metabolite selection and a preliminary list of proposed metabolites, this paper describes some of the strengths and limitations of this initiative given the current state of microbiome research. CONCLUSIONS: Given the rapidly evolving nature of gut microbiome science and the current state of knowledge, an RM (as opposed to a CRM) measured for multiple metabolites is appropriate at this stage. As the science evolves, the RM can evolve to match the needs of the research community. Ultimately, the stool RM may exist in sequential versions. Beneficial to this evolution will be a clear line of communication between NIST and the stakeholder community to ensure alignment with current scientific understanding and community needs.
Subject(s)
Feces/microbiology , Gastrointestinal Microbiome , Metabolome , Metagenome , Diet , Feces/chemistry , Humans , Metabolomics , MetagenomicsABSTRACT
The unavailability of appropriate quality assurance/quality control materials in many lipidomics applications poses a significant challenge for lipidomics research. It is recommended that samples with certified values and/or consensus estimates, such as NIST SRM 1950-Metabolites in Frozen Human Plasma, be implemented in routine analyses to enable community-wide comparisons of lipidomics results and analytical workflows. Herein, we applied a nontargeted lipidomics method for the analysis of a new human plasma reference material suite developed by NIST (hypertriglyceridemic, diabetic, and African-American plasma pools), in addition to SRM 1950. We identified specific lipidomics fingerprints associated with each sample type, including lauric acid-containing lipids and elevated triacylglycerol levels in hypertriglyceridemic plasma, palmitoleic acid-containing lipids in diabetic plasma, and oxidized fatty acid-containing phospholipids in African-American plasma. This work highlights the importance of developing and profiling application-specific reference materials, while establishing reference data that may be used for system suitability and/or quality control metrics.Graphical abstract.
Subject(s)
Diabetes Mellitus/blood , Hyperglycemia/blood , Lipidomics/methods , Lipids/blood , Black or African American , Chromatography, High Pressure Liquid/methods , Chromatography, High Pressure Liquid/standards , Humans , Lipidomics/standards , Lipids/analysis , Quality Control , Reference Standards , Tandem Mass Spectrometry/methods , Tandem Mass Spectrometry/standards , Triglycerides/analysis , Triglycerides/bloodABSTRACT
Over two decades, the Organic Analysis Working Group (OAWG) of the Consultative Committee for Amount of Substance: Metrology in Chemistry and Biology (CCQM) has organized a number of comparisons for clinically relevant small molecule organic biomarkers. The aim of the OAWG community is to be part of the coordinated international movement towards accuracy and comparability of clinical measurements that will, in turn, minimize the wastage of repeat testing and unnecessary therapy to create a sustainable healthcare industry. International and regional directives/requirements on metrological traceability of calibrators and control materials are in place. Metrology institutes worldwide maintain infrastructure for the practical realization of metrological traceability and demonstrate the equivalence of their measurement capabilities through participation in key comparisons organized under the auspices of the CCQM. These institutes provide certified reference materials, as well as other dedicated value-assignment services benefiting the in-vitro diagnostic (IVD) industry, reference (calibration) laboratories and the clinical chemistry laboratories. The roles of these services in supporting national, regional, and international activities to ensure the metrological traceability of clinical chemistry measurements are described. Graphical abstract.
Subject(s)
Biomarkers/analysis , Organic Chemicals/analysis , Small Molecule Libraries/analysis , Calibration , Clinical Chemistry Tests , Humans , In Vitro Techniques , Reference Standards , Reproducibility of ResultsABSTRACT
Metrological traceability for organic chemical measurements is a documented unbroken chain of calibrations with stated uncertainties that ideally link the measurement result for a sample to a primary calibrator in appropriate SI units (e.g., mass fraction). A comprehensive chemical purity determination of the organic calibrator is required to ensure a true assessment of this result. We explore the evolution of chemical purity capabilities across metrology institute members of the Consultative Committee for Amount of Substance: Metrology in Chemistry and Biology's Organic Analysis Working Group (OAWG). The OAWG work program has promoted the development of robust measurement capabilities, using indirect "mass balance" determinations via rigorous assessment of impurities and direct determination using quantitative nuclear magnetic resonance spectroscopy methods. A combination of mass balance and qNMR has been shown to provide a best practice approach. Awareness of the importance of the traceability of organic calibrators continues to grow across stakeholder groups, particularly in key areas such as clinical chemistry where activities related to the Joint Committee for Traceability in Laboratory Medicine have raised the profile of traceable calibrators.
ABSTRACT
Process quality control and reproducibility in emerging measurement fields such as metabolomics is normally assured by interlaboratory comparison testing. As a part of this testing process, spectral features from a spectroscopic method such as nuclear magnetic resonance (NMR) spectroscopy are attributed to particular analytes within a mixture, and it is the metabolite concentrations that are returned for comparison between laboratories. However, data quality may also be assessed directly by using binned spectral data before the time-consuming identification and quantification. Use of the binned spectra has some advantages, including preserving information about trace constituents and enabling identification of process difficulties. In this paper, we demonstrate the use of binned NMR spectra to conduct a detailed interlaboratory comparison and composition analysis. Spectra of synthetic and biologically-obtained metabolite mixtures, taken from a previous interlaboratory study, are compared with cluster analysis using a variety of distance and entropy metrics. The individual measurements are then evaluated based on where they fall within their clusters, and a laboratory-level scoring metric is developed, which provides an assessment of each laboratory's individual performance.
ABSTRACT
As feedstocks transition from conventional oil to unconventional petroleum sources and biomass, it will be necessary to determine whether a particular fuel or fuel blend is suitable for use in engines. Certifying a fuel as safe for use is time-consuming and expensive and must be performed for each new fuel. In principle, suitability of a fuel should be completely determined by its chemical composition. This composition can be probed through use of detailed analytical techniques such as gas chromatography-mass spectroscopy (GC-MS). In traditional analysis, chromatograms would be used to determine the details of the composition. In the approach taken in this paper, the chromatogram is assumed to be entirely representative of the composition of a fuel, and is used directly as the input to an algorithm in order to develop a model that is predictive of a fuel's suitability. When a new fuel is proposed for service, its suitability for any application could then be ascertained by using this model to compare its chromatogram with those of the fuels already known to be suitable for that application. In this paper, we lay the mathematical and informatics groundwork for a predictive model of hydrocarbon properties. The objective of this work was to develop a reliable model for unsupervised classification of the hydrocarbons as a prelude to developing a predictive model of their engine-relevant physical and chemical properties. A set of hydrocarbons including biodiesel fuels, gasoline, highway and marine diesel fuels, and crude oils was collected and GC-MS profiles obtained. These profiles were then analyzed using multi-way principal components analysis (MPCA), principal factors analysis (PARAFAC), and a self-organizing map (SOM), which is a kind of artificial neural network. It was found that, while MPCA and PARAFAC were able to recover descriptive models of the fuels, their linear nature obscured some of the finer physical details due to the widely varying composition of the fuels. The SOM was able to find a descriptive classification model which has the potential for practical recognition and perhaps prediction of fuel properties.
ABSTRACT
Chemical purity assessment using quantitative 1H-nuclear magnetic resonance spectroscopy is a method based on ratio references of mass and signal intensity of the analyte species to that of chemical standards of known purity. As such, it is an example of a calculation using a known measurement equation with multiple inputs. Though multiple samples are often analyzed during purity evaluations in order to assess measurement repeatability, the uncertainty evaluation must also account for contributions from inputs to the measurement equation. Furthermore, there may be other uncertainty components inherent in the experimental design, such as independent implementation of multiple calibration standards. As such, the uncertainty evaluation is not purely bottom up (based on the measurement equation) or top down (based on the experimental design), but inherently contains elements of both. This hybrid form of uncertainty analysis is readily implemented with Bayesian statistical analysis. In this article we describe this type of analysis in detail and illustrate it using data from an evaluation of chemical purity and its uncertainty for a folic acid material.
ABSTRACT
Reference standards for the vitamin D metabolites 25-hydroxyvitamin D3, 25-hydroxyvitamin D2, and 3-epi-25-hydroxyvitamin D3 were evaluated using liquid chromatography (LC) with ultraviolet (UV) absorbance and mass spectrometric (MS) detection to assess purity. The chromatograms for solutions of all three 25(OH)D compounds, obtained using a pentafluorophenyl (PFP) stationary phase, revealed peaks that increased in area over time and had MS spectra that were nearly identical to the parent compound, indicating isomers had formed in solution that were unrelated to the reference standard purity. However, when the purity evaluations were completed with a cyanopropyl stationary phase, the isomeric products coeluted with the parent compounds and were not observable. The rates of formation of the isomeric products were found to increase when heated and were confirmed to be pre-25-hydroxyvitamin D compounds using spectral information from both MS detection and nuclear magnetic resonance (NMR) spectroscopy. The rates of conversion of 25(OH)D3 to pre-25(OH)D3 was studied in solutions of ethanol and bovine serum albumin (BSA) in phosphate-buffered saline (PBS). The solutions prepared with BSA/PBS were found to form twice as much pre-25(OH)D3 as the solutions in ethanol. The isomerization of 25(OH)D in solution has implications for calibration of 25(OH)D in clinical measurements, which are discussed.
Subject(s)
25-Hydroxyvitamin D 2/chemistry , Calcifediol/chemistry , Mass Spectrometry/methods , Vitamin D/analogs & derivatives , Animals , Calibration , Cattle , Chromatography, Liquid/methods , Isomerism , Reference Standards , Serum Albumin, Bovine/chemistry , Solutions , Vitamin D/chemistryABSTRACT
Given the critical role of pure, organic compound primary reference standards used to characterize and certify chemical Certified Reference Materials (CRMs), it is essential that associated mass purity assessments be fit-for-purpose, represented by an appropriate uncertainty interval, and metrologically sound. The mass fraction purities (% g/g) of 25-hydroxyvitamin D (25(OH)D) reference standards used to produce and certify values for clinical vitamin D metabolite CRMs were investigated by multiple orthogonal quantitative measurement techniques. Quantitative (1)H-nuclear magnetic resonance spectroscopy (qNMR) was performed to establish traceability of these materials to the International System of Units (SI) and to directly assess the principal analyte species. The 25(OH)D standards contained volatile and water impurities, as well as structurally-related impurities that are difficult to observe by chromatographic methods or to distinguish from the principal 25(OH)D species by one-dimensional NMR. These impurities have the potential to introduce significant biases to purity investigations in which a limited number of measurands are quantified. Combining complementary information from multiple analytical methods, using both direct and indirect measurement techniques, enabled mitigation of these biases. Purities of 25(OH)D reference standards and associated uncertainties were determined using frequentist and Bayesian statistical models to combine data acquired via qNMR, liquid chromatography with UV absorbance and atmospheric pressure-chemical ionization mass spectrometric detection (LC-UV, LC-ACPI-MS), thermogravimetric analysis (TGA), and Karl Fischer (KF) titration.
Subject(s)
Chromatography, Liquid/standards , Magnetic Resonance Spectroscopy/standards , Mass Spectrometry/standards , Vitamin D/isolation & purification , Bayes Theorem , Chromatography, Liquid/methods , Magnetic Resonance Spectroscopy/methods , Mass Spectrometry/methods , Reference Standards , Solutions , Thermogravimetry , Vitamin D/analogs & derivativesABSTRACT
Quantitative evidence is presented for the importance of alkyl peroxy photochemistry in the formation of secondary organic aerosol at 254 nm. Particles were generated by extensively oxidizing dodecanoic acid with photolytically generated hydroxyl radicals in a flow cell. The resulting particles were collected and analyzed for composition, which shows a lower contribution from multiply substituted parent molecules and much more decomposition product than expected from typical low-NOx oxidation mechanisms. Studies were performed at two separate reaction times, and kinetics modeling calculations were done using theoretical work from the combustion literature to estimate the branching of the photoexcited products. Extrapolation of the ethyl peroxy radical absorption spectrum compared to actinic flux measurements also shows that the alkyl peroxy radical absorption at â¼310 nm leads to photochemical lifetimes under pristine tropospheric conditions that are comparable to predicted lifetimes from peroxy-peroxy recombination reactions, particularly at higher altitudes.
ABSTRACT
Non-invasive and real-time analysis of cellular redox processes has been greatly hampered by lack of suitable measurement techniques. Here we describe an in-cell nuclear magnetic resonance (NMR) based method for measuring the intracellular glutathione redox potential by direct and quantitative measurement of isotopically labeled glutathione introduced exogenously into living yeast. By using this approach, perturbations in the cellular glutathione redox homeostasis were also monitored as yeast cells were subjected to oxidative stress.
Subject(s)
Glutathione/metabolism , Nuclear Magnetic Resonance, Biomolecular/methods , Oxidative Stress , Saccharomyces cerevisiae/metabolism , Glutathione/biosynthesis , Glutathione Disulfide/metabolism , Homeostasis , Membrane Transport Proteins/metabolism , Models, Biological , Nitrogen Isotopes , Oxidants/pharmacology , Oxidation-Reduction , Oxidative Stress/drug effectsABSTRACT
Methods for quantifying the level of glutathione (GSH) in yeast cell lysate are described using (1)H NMR analysis. For quantification purposes, the (1)H resonances corresponding to the Cys ßCH2 of GSH were identified as having the fewest overlapping spectral interferences from lysate matrix components using GSH spiked yeast lysate samples. Two methods, standard addition based on peak integration and a spectral subtraction approach, were evaluated for quantifying GSH in lysate samples. The peak integration procedure required baseline estimation and a peak fitting step to correct for background interferences while the spectral subtraction procedure was comparatively straightforward. The level of GSH measured by (1)H NMR was in good agreement with the concentration measured by the DTNB-GSSG reductase recycling assay. The proposed NMR method can lead to a reliable quantitation of GSH and could be applicable to a variety of other analytes of interest in complex biological matrices.
Subject(s)
Cell Fractionation , Glutathione/analysis , Magnetic Resonance Spectroscopy/methods , Saccharomyces cerevisiae/chemistry , ProtonsABSTRACT
The National Institute of Standards and Technology (NIST) has established a Dietary Supplement Laboratory Quality Assurance Program (DSQAP) in collaboration with the National Institutes of Health Office of Dietary Supplements (NIH-ODS). The DSQAP invites laboratories twice annually to participate in interlaboratory studies where participants elect to measure concentrations of nutritional and/or toxic elements as well as active and/or marker compounds. One of these studies was designed to determine the effects of material granularity and sample processing techniques on measurement variability (precision) as well as to provide participating laboratories information on their performance relative to the NIST assigned values (bias) and to the other participants (concordance). Participants were asked to determine the mass fractions of Ca, Fe, and Zn, in mg/kg, in six breakfast cereal samples. Cereal samples consisted of three ground materials (homogenized wheat, wheat, and rice), two flake materials (wheat and rice) and a partially crushed material (a wheat/rice mixture). In general, approximately 25% of the laboratories processed and analyzed the suite of six cereal materials with adequate to exemplary measurement precision. Over half of the laboratories (60%) experienced measurement issues related to only a particular type of cereal matrix or for only a single element. A small number (15%) of laboratories experienced significant sample processing or measurement problems. Future studies planned by the DSQAP may be designed to use commercial products to aid laboratories with their sampling and analytical techniques.
Subject(s)
Edible Grain/chemistry , Metals, Heavy/analysis , Chromatography, Liquid , Food Analysis , Humans , Quality Control , Reference Standards , Reference Values , Reproducibility of Results , Tandem Mass SpectrometryABSTRACT
We report a sample pretreatment approach for the analysis of total cocaine residues in wastewater that eliminates the need for two key assumptions often made in estimating cocaine utilization from measurement of its benzoylecgonine metabolite: that benzoylecgonine is neither degraded nor generated during transport in a sewer system, and that it is excreted as a constant fraction of cocaine ingested. By adding NaOH and incubating samples at 55 °C, cocaine and its principal metabolites are efficiently hydrolyzed into ecgonine, anhydroecgonine, and norecgonine. Ecgonine, estimated to represent between 37% and 90% (on a molar basis) of cocaine residues, can be directly determined (without preconcentration via solid-phase extraction (SPE)) by reversed-phase (RP) or hydrophilic interaction liquid chromatography-tandem mass spectrometry (LC/MS/MS). If samples are subjected to SPE, anhydroecgonine can also be determined; this metabolite (and its precursors) represents ≈7% of urinary cocaine residues (based on spot collections from living individuals). Although a reference standard for norecgonine is not commercially available, such nortropanes are also a minor fraction (up to 2%) of urinary cocaine residues. The stability of two human markers (cotinine and creatinine) to the hydrolysis procedure was also investigated. Results obtained by applying the hydrolysis approach for the analysis of total cocaine in an untreated municipal wastewater sample (obtained from Baltimore, MD) were generally in excellent agreement with those obtained from split samples analyzed using a more comprehensive solid-phase extraction RPLC/MS/MS method as described in our previous work. In particular, total tropane-based cocaine residues were found to be hydrolyzed to ecgonine with 98-99% efficiency.
Subject(s)
Cocaine/analogs & derivatives , Cocaine/analysis , Waste Disposal, Fluid , Water Pollutants, Chemical/analysis , Chromatography, Liquid/methods , Humans , Hydrolysis , Solid Phase Extraction/methods , Tandem Mass Spectrometry/methodsABSTRACT
The Consultative committee for amount of substance-metrology in chemistry (CCQM)-K80 Key Comparison directly assessed the equivalence of many of the world's higher-order value-assigned materials (HOVAMs) for creatinine in human serum. This 2009 international study compared the certified values and uncertainties of the materials using measurements made under repeatability conditions. The study evaluated 17 materials submitted by 6 national metrology institutes (NMIs). The creatinine quantity in these materials ranged from 3 mg/kg to 57 mg/kg (about 0.3 mg/dL to 6 mg/dL or 30 nmol/L to 500 nmol/L). All materials were stored and prepared according the specifications provided by the participating NMIs. Samples were processed and analyzed under repeatability conditions by one analyst using isotope-dilution liquid chromatography-mass spectrometry in two measurement campaigns. The certified values and repeatability measurements were compared using uncertainty-weighted generalized distance regression. The instrumental repeatability relative standard deviation was 1.2%. The measurement design required assessment of within-unit and between-campaign variability in addition to measurement repeatability. At a 95% level of confidence, the certified values for all 17 materials agreed to within their assigned uncertainties. CCQM-K80 demonstrated the metrological equivalence of the currently available HOVAMs for creatinine in human serum and of the creatinine measurement services provided by the participating NMIs.
Subject(s)
Chromatography, Liquid/standards , Creatinine/standards , Mass Spectrometry/standards , Calibration , Chromatography, Liquid/methods , Creatinine/blood , Humans , Mass Spectrometry/methods , Reference Standards , Reference ValuesABSTRACT
Exhaled breath is a non-invasive, information-rich matrix with the potential to diagnose or monitor disease, including infectious disease. Despite significant effort dedicated to biomarker identification in case control studies, very few breath tests are established in practice. In this topical review, we identify how gas standards support breath analysis today and what is needed to support further expansion and translation to practice. We examine forensic and clinical breath tests and discuss how confidence has been built through unambiguous biomarker identification and quantitation supported by gas calibration standards. Based on this discussion, we identify a need for multicomponent gas standards with part-per-trillion to part-per-million concentrations. We highlight National Institute of Standards and Technology gas standards developed for atmospheric measurements that are also relevant to breath analysis and describe investigations of long-term stability, chemical reactions, and interactions with gas cylinder wall treatments. An overview of emerging online instruments and their need for gas standards is also presented. This review concludes with a discussion of our ongoing research to examine the feasibility of producing multicomponent gas standards at breath-relevant concentrations. Such standards could be used to investigate interference from ubiquitous endogenous compounds and as a starting point for standards tailored to specific breath tests.
Subject(s)
Breath Tests , Volatile Organic Compounds , Biomarkers , Exhalation , Humans , Reference Standards , Volatile Organic Compounds/analysisABSTRACT
The National Institute of Standards and Technology (NIST) has established a Dietary Supplement Laboratory Quality Assurance Program (DSQAP) in collaboration with the National Institutes of Health Office of Dietary Supplements. Program participants measure concentrations of active and/or marker compounds as well as nutritional and toxic elements in food and dietary supplements distributed by NIST. Data are compiled at NIST, where they are analyzed for accuracy relative to reference values and concordance among the participants. Performance reports and certificates of completion are provided to participants, which can be used to demonstrate compliance with current Good Manufacturing Practices as promulgated by the U.S. Food and Drug Administration. The DSQAP has conducted five exercises to date, with total participation including more than 75 different laboratories and many more individual analysts.