Multi-layer 3D Chirality and Double-Helical Assembly in a Copper Nanocluster with a Triple-Helical Cu15 Core.

Conceptually mimicking biomolecules' ability to construct multiple-helical aggregates with emergent properties and functions remains a long-standing challenge. Here we report an atom-precise 18-copper nanocluster (NC), Cu18 H(PET)14 (TPP)6 (NCS)3 (Cu18 H) which contains a pseudo D3 -symmetrical triple-helical Cu15 core. Structurally, Cu18 H may be also viewed as sandwich type of sulfur-bridged chiral copper cluster units [Cu6 -Cu6 -Cu6 ], endowing three-layered 3D chirality. More importantly, the chiral NCs are aggregated into an infinite double-stranded helix supported by intra-strand homonuclear C-H⋅⋅⋅H-C dihydrogen contacts and inter-strand C-H/π and C-H/S interactions. The unique multi-layered 3D chirality and the double-helical assembly of Cu18 H are evocative of DNA. Moreover, the collective behaviours of the aggregated NCs not only exhibit crystallization-induced emission enhancement (CIEE) and aggregation-induced emission enhancement (AIEE) effects in the deep-red region, but also efficiently catalyze electron transfer (ET) reaction. This study thus presents that hierarchical assemblies of atomically defined copper NCs could be intricate as observed for important biomolecules like DNA with emergent properties arising from aggregated behaviours.

Total Structure, Electronic Structure and Catalytic Hydrogenation Activity of Metal-Deficient Chiral Polyhydride Cu57 Nanoclusters.

Accurate identifying and in-depth understanding of the defect sites in a working nanomaterial could hinge on establishing specific defect-activity relationships. Yet, atomically precise coinage-metal nanoclusters (NCs) possessing surface vacancy defects are scarce primarily owing to challenges in the synthesis and isolation of such defective NCs. Herein we report a mixed-ligand strategy to synthesizing an intrinsically chiral and metal-deficient copper hydride-rich NC [Cu57 H20 (PET)36 (TPP)4 ]+ (Cu57 H20 ). Its total structure (including hydrides) and electronic structure are well established by combined experimental and computational results. Crystal structure reveals Cu57 H20 features a cube-like Cu8 kernel embedded in a corner-missing metal-ligand shell of Cu49 (PET)36 (TPP)4 . Single Cu vacancy defect site occurs at one corner of the shell, evocative of mono-lacunary polyoxometalates. Theoretical calculations demonstrate that the above-mentioned point vacancy causes one surface hydride exposed as an interfacial capping µ3 -H- , which is accessible in chemical reaction, as proved by deuterated experiment. Moreover, Cu57 H20 shows catalytic activity in the hydrogenation of nitroarene. The success of this work opens the way for the research on well-defined chiral metal-deficient Cu and other metal NCs, including exploring their application in asymmetrical catalysis.

Unusual Intramolecular Motion of ReH92- in K2ReH9 Crystal: Circle Dance and Three-Arm Turnstile Mechanisms Revealed by Computational Studies.

The nonahydridorhenate dianion ReH92- is a unique rhenium polyhydride complex due to its remarkably high coordination number; however, its detailed polytopal rearrangement process in either solution or crystal is so far unclear. In this work, our quantum chemical calculations have identified two previously unreported fluxional mechanisms for the ReH92- dianion in the K2ReH9 crystal: three-arm turnstile rotation and circle dance mechanism. These two polytopal rearrangements in the crystal offer an alternative interpretation to the pulse and wide-line NMR spectra (Farrar et al. J. Chem. Phys. 1969, 51, 3595). The previously postulated hindered rotation of the whole ReH92- dianion in K2ReH9 (White et al. J. Chem. Soc., Faraday Trans. 2 1972, 68, 1414) turns out to be a combination of the above-mentioned two elementary fluxional processes. In addition, our calculations have confirmed the Muetterties' D3h⇌C4v rearrangement as the intramolecular motion for the ReH92- dianion in solution.

Describing Polytopal Rearrangement Processes of Octacoordinate Structures. I. Renewed Insights into Fluxionality of the Rhenium Polyhydride Complex ReH5(PPh3)2(Pyridine).

Hydride ligands of transition metal polyhydride complexes with a high coordination number are prone to fluxionality leading to interesting structural dynamics. However, the underlying polytopal rearrangement pathways have been rarely studied. Based on quantum chemical calculations carried out in this work with density functional theory and coupled-cluster theory, two new fluxional mechanisms have been identified for the rhenium polyhydride complex ReH5(PPh3)2(pyridine) to jointly account for two consecutive coalescence events in the variable-temperature NMR spectra upon heating: lateral and basal three-arm turnstile rotation. The frequently cited pseudorotation in ReH5(PPh3)2(pyridine) (Lee et al. Inorg. Chem. 1996, 35, 695) turns out to be a three-step process including two lateral three-arm turnstile steps and one basal turnstile step in between. The new fluxional mechanisms discovered in this work may also exist in other transition metal polyhydrides.

Recent Progress in Inorganic Anions Templated Silver Nanoclusters: Synthesis, Structures and Properties.

Over recent years, research on the ligand-protected silver clusters have gained significant interest owing to their unique potential applications in catalysis, organic optoelectronics, and luminescent materials. However, the synthesis of structurally precise high-nuclearity silver nanoclusters is still challenging and become one of the prime interests of chemists. The controllable synthesis of high-nuclearity silver nanoclusters involves the ingenious use of capping ligands or/and templating agents. Thereinto, the main role of the templating agents is to promote the order arrangement of silver ions around them to form discrete molecules. Our lab has performed comprehensive studies on the ligand-protected silver clusters in the past eight years. This review highlights recent progress in the use of inorganic template anions, silver precursors, solvents, and the ligand types in synthesizing high-nuclearity silver nanoclusters. Furthermore, some interesting photo- and electrochemical properties revealed by silver clusters including luminescent thermochromism, electrical conductivity, and electrochemical reduction of H2 O2 have been also summarized.

The Difference Se Makes: A Bio-Inspired Dppf-Supported Nickel Selenolate Complex Boosts Dihydrogen Evolution with High Oxygen Tolerance.

Inspired by the metal active sites of [NiFeSe]-hydrogenases, a dppf-supported nickel(II) selenolate complex (dppf=1,1'-bis(diphenylphosphino)ferrocene) shows high catalytic activity for electrochemical proton reduction with a remarkable enzyme-like H2 evolution turnover frequency (TOF) of 7838 s-1 under an Ar atmosphere, which markedly surpasses the activity of a dppf-supported nickel(II) thiolate analogue with a low TOF of 600 s-1 . A combined study of electrochemical experiments and DFT calculations shed light on the catalytic process, suggesting that selenium atom as a bio-inspired proton relay plays a key role in proton exchange and enhancing catalytic activity of H2 production. For the first time, this type of Ni selenolate-containing electrocatalyst displays a high degree of O2 and H2 tolerance. Our results should encourage the development of the design of highly efficient oxygen-tolerant Ni selenolate molecular catalysts.

Silver-Sulfur Hybrid Supertetrahedral Clusters: The Hitherto Missing Members in the Metal-Chalcogenide Tetrahedral Clusters.

The synthesis of Group 11 metal chalcogenide supertetrahedral clusters (SCs) still remains a great challenge mainly due to the high tendency of metal aggregation through metallophilicity and global charge balance. Demonstrated herein are the preparation, crystallographic characterization, and optical properties of two stable silver-sulfur SCs through ligand-control; one as a discrete zero-dimensional (0D) V3,4-type cluster and the other as a one-dimensional (1D) zigzag chain extended by alternating V3,2-type clusters. The notation Vn,m (where n is the number of metal layers, and m is the number of vacant corners) is used to describe a new series of vacant-corner SCs, which can be derived from the regular Tn clusters. The existence of vacant-corner-type SCs may be ascribed to the low valence and tri-coordinated environment of silver ions. These are the first representatives of structurally determined silver-sulfur tetrahedral clusters thus far. This work enriches the coinage-metal chalcogenide tetrahedral cluster portfolio, discovers vacant-corner SCs present in silver-sulfur hybrid tetrahedral clusters, and provides effective means for further development of Group 11 coinage-metal chalcogenide SCs.

The relationship between the boron dipyrromethene (BODIPY) structure and the effectiveness of homogeneous and heterogeneous solar hydrogen-generating systems as well as DSSCs.

A series of boron dipyrromethene (BODIPY) dyes (B1­B5) having H atoms at 2,6-positions or heavy-atom I at 2-/2,6-positions, and an ortho- or a para-COOH substituted phenyl moiety at the 8-position on the BODIPY core were synthesized and characterized. These organic dyes were applied for investigating the relationship between the BODIPY structure and the effectiveness of homogeneous and heterogeneous visible-light-driven hydrogen production as well as dye-sensitized solar cells (DSSCs). For the homogeneous photocatalytic hydrogen production systems with a cobaloxime catalyst, the efficiency of hydrogen production could be tuned by substituting with heavy atoms and varying carboxyl group orientations of BODIPYs. As a result, B5 containing two I atoms and an ortho-COOH anchoring group was the most active one (TONs = 197). The activity of hydrogen generation followed the order B5 > B3 > B2 > B1 = B4 = 0. An interesting "ortho-position effect" was observed in the present homogeneous systems, i.e., substitution groups were located at the ortho-position and higher hydrogen production activities were obtained. For the heterogeneous hydrogen production systems with a platinized TiO2 catalyst, the effectiveness of hydrogen evolution was highly influenced by the intersystem crossing efficiency, molar absorptivity and positions of the anchoring group of dyes. Thus, B3 having two core iodine atoms and a para-COOH group with TONs of 70 excelled other BODIPYs and the TONs of hydrogen generation showed the trend of B3 > B5 > B2 > B1 = B4 = 0. The results demonstrate that the present photocatalytic H2 production proceeds with higher efficiency and stability in the homogeneity than in the heterogeneity. In the case of DSSCs, the overall cell performance of BODIPY chromophores was highly dependent on both the absence or the presence of iodine atoms on the BODIPY core and ­COOH anchoring positions. The B1­TiO2 system showed the best cell performance, because the most effective surface binding mode is allowed with this structure. This is also in contrast with the case of dye-sensitized solar H2 generation, in which B3 was the most efficient chromophore. The differences between dye-sensitized hydrogen-generating systems and DSSCs may be due to rates of electron transfer and the dye aggregation tendency.

Experimental and theoretical study of enol-keto prototropic tautomerism and photophysics of azomethine-BODIPY dyads.

In this study we report about two novel azomethine­BODIPY dyads 1 and 2. The two dyads have been, respectively, synthesized by covalent tethering of tautomeric ortho-hydroxy aromatic azomethine moieties including N-salicylideneaniline (SA) and N-naphthlideneaniline (NA) to a BODIPY fluorophore. Both of the two dyads 1 and 2 show enol-imine (OH) structures dominating in the crystalline state. Dyad 1 in the enol state is the most stable form at room temperature in most media, while enol­keto prototropic tautomerism of the NA moiety in solution is preserved in dyad 2, which can be reversibly converted between enol and keto forms in the environment's polarity. Visible illumination of dyad 2 in the enol state excites selectively the BODIPY fragment and then deactivates radiatively by emitting green light in the form of fluorescence, while the emission intensity of 2 in the keto state is quenched on the basis of the proton-coupled photoinduced electron transfer (PCPET) mechanism. This allows large fluorescence modulation between the two states of dyad 2 and generates a novel tautomerisable fluorescent switch. Theoretical calculations including calculated energies, potential energy surfaces (PESs) and intrinsic reaction coordinate (IRC) analysis further support that the single proton transfer reaction from an enol form to a transition state (TS) and from the TS to a keto form for 2 is easier to occur than that for 1, which accounts for the fluorescence quenching of 2 in methanol. The agreement of the experimental results and theoretical calculations clearly suggests that fluorescent and tautomeric components can be paired within the same molecular skeleton and the proton tautomerization of the latter can be designed to regulate the emission of the former. In addition, preliminary experiments revealed that 1 can be potentially used as a simple on/off fluorescent chemosensor which exhibited higher selectivity for Cu(2+) over other common cations.

Noble-metal-free BODIPY-cobaloxime photocatalysts for visible-light-driven hydrogen production.

In this study a series of supramolecular BODIPY-cobaloxime systems Co-Bn (n = 1-4): [{Co(dmgH)2Cl}{4,4-difluoro-8-(4-pyridyl)-1,3,5,7-tetramethyl-4-bora-3a,4a-diaza-s-indacene}] (Co-B1), [{Co(dmgH)2Cl}{4,4-difluoro-8-(4-pyridyl)-1,3,5,7-tetramethyl-2,6-diiodo-4-bora-3a,4a-diaza-s-indacene}] (Co-B2), [{Co(dmgH)2Cl}{4,4-difluoro-8-(3-pyridyl)-1,3,5,7-tetramethyl-4-bora-3a,4a-diaza-s-indacene}] (Co-B3), and [{Co(dmgH)2Cl}{4,4-difluoro-8-(3-pyridyl)-1,3,5,7-tetramethyl-2,6-diiodo-4-bora-3a,4a-diaza-s-indacene}] (Co-B4) (BODIPY = boron dipyrromethene, dmgH = dimethylglyoxime) have been synthesized by replacing one axial chlorine of cobaloxime moieties with the pyridine residues of BODIPYs, and structurally characterized. Absorption spectra show that the optical properties of the BODIPY-cobaloximes are essentially the sum of their constituent components, indicating weak interactions between the cobaloxime units and BODIPY chromophores in the ground state. If any, electronic communications may take place through the intramolecular electron transfer across their orthogonal structures. The possibility of intramolecular electron transfer is further supported by the results of the density functional theory (DFT) calculations at UB3LYP/LANL2DZ levels on Co-B2˙(-) and Co-B4˙(-), which show that the highest occupied molecular orbitals (HOMOs) possess predominantly BODIPY character, while the lowest unoccupied molecular orbitals (LUMOs) are located on the cobalt centers. The HOMO → LUMO transition is an electron-transfer process (BODIPY˙(-) radical anions → cobaloxime fragments). In view of the possible occurrence of electron transfer, these noble-metal-free BODIPY-cobaloximes are studied as single-component homogeneous photocatalysts for H2 generation in aqueous media. Under optimized conditions, the 2,6-diiodo BODIPY-sensitized cobaloxime Co-B4 that contains a meta-pyridyl at the 8-position of BODIPY presents excellent H2 photoproduction catalytic activity with a turnover number (TON) of 85, which is comparable to that of its analogue Co-B2 that has a para-pyridyl attached onto 2,6-diiodo BODIPY (TON = 82); however, both of the noniodinated BODIPY-sensitizer cobaloximes (Co-B1, Co-B3) exhibit a complete lack of activity under the same experimental conditions. These results show that the presence of heavy atoms in the core of BODIPY is essential for the catalytic process and reductive quenching pathways (namely, the intramolecular electron transfers from BODIPY˙(-) species to the cobalt centers) for these photocatalytically active systems of Co-Bn (n = 2 and 4) are thermodynamically feasible for the hydrogen-evolving reaction.

Secondary hierarchical complexity in double-stranded cluster helicates covered by NNNNN type pincer ligands.

We designed and synthesized a new tripyridine dipyrrolide pincer ligand, which could be doubly deprotonated to provide five-nitrogen-donor sites and then utilized to prepare a subnanometric chiral silver cluster. The cluster belongs to an S4 point group and shows a double-stranded helicate. DFT calculations were performed to analyze the electronic structure of the cluster. Interestingly, through hierarchical intercluster interactions, the cluster helicates evolve into complex secondary structures including a right-handed helix and a folded sheet, both of which are reminiscent of secondary structures of proteins, i.e., an α-helix and an antiparallel ß-sheet.

Controllable spontaneous resolution in ultrasmall Cu-Ag bimetallic cluster ion pairs from achiral components.

Bimetallic cluster ion pairs containing a quaternary phosphonium and an ultrasmall Cu2Ag3 anionic cluster protected by thiolates: (PPh3R'')[Cu2Ag3(SR')6] (R'SH = cyclohexylthiol (CySH), R'' = Ph, 1; Me, 2; Et, 3; Pr, 4; R'SH = tert-butylthiol (tBuSH) and R'' = Ph, 5) were reported. Without any chiral source, 1 crystallizes as conglomerate crystals with homochiral packings and spontaneous resolution occurs, while four other clusters 2-5 crystallize as racemic crystals with heterochiral packings. These results indicate that racemic and homochiral crystallization in the cluster system could be controlled through fine-tuning internal achiral structural components.

catena-Poly[[silver(I)-µ-1,3-bis(4-pyridyl)propane] hemi(naphthalene-1,5-disulfonate) dihydrate]: a three-dimensional metallo-supramolecular sandwich lamellar network.

The title compound, {[Ag(C(13)H(14)N(2))](C(10)H(6)O(6)S(2))(0.5)·2H(2)O}(n), (I), features a three-dimensional supramolecular sandwich architecture that consists of two-dimensional cationic layers composed of polymeric chains of silver(I) ions and 1,3-bis(4-pyridyl)propane (bpp) ligands, linked by Ag···Ag and π-π interactions, alternating with anionic layers in which uncoordinated naphthalene-1,5-disulfonate (nds(2-)) anions and solvent water molecules form a hydrogen-bonded network. The asymmetric unit consists of one Ag(I) cation linearly coordinated by N atoms from two bpp ligands, one bpp ligand, one half of an nds(2-) anion lying on a centre of inversion and two solvent water molecules. The two-dimensional {[Ag(bpp)](+)}(n) cationic and {[(nds)·2H(2)O](2-)}(n) anionic layers are assembled into a three-dimensional supramolecular framework through long secondary coordination Ag···O interactions between the sulfonate O atoms and Ag(I) centres and through nonclassical C-H···O hydrogen bonds.

Observation of a bcc-like framework in polyhydrido copper nanoclusters.

Cu is well-known to adopt a face-centered cubic (fcc) structure in the bulk phase. Ligand-stabilized Cu nanoclusters (NCs) with atomically precise structures are an emerging class of nanomaterials. However, it remains a great challenge to have non-fcc structured Cu NCs. In this contribution, we report the syntheses and total structure determination of six 28-nuclearity polyhydrido Cu NCs: [Cu28H16(dppp)4(RS)4(CF3CO2)8] (dppp = 1,3-bis(diphenylphosphino)propane, RSH = cyclohexylthiol, 1; tert-butylthiol, 3; and 2-thiophenethiol, 4) and [Cu28H16(dppe)4(RS)4(CH3CO2)6Cl2] (dppe = 1,2-bis(diphenylphosphino)ethane, RSH = (4-isopropyl)thiophenol, 2; 4-tert-butylbenzenethiol, 5; and 4-tert-butylbenzylmercaptan, 6). Their well-defined structures solved by X-ray single crystal diffraction reveal that these 28-Cu NCs are isostructural, and the overall metal framework is arranged as a sandwich structure with a core-shell Cu2@Cu16 unit held by two Cu5 fragments. One significant finding is that the organization of 18 Cu atoms in the Cu2@Cu16 could be regarded as an incomplete and distorted version of 3 × 2 × 2 "cutout" of the body-centered cubic (bcc) bulk phase, which was strikingly different to the fcc structure of bulk Cu. The bcc framework came as a surprise, as no bcc structures have been previously observed in Cu NCs. A comparison with the ideal bcc arrangement of 18 Cu atoms in the bcc lattice suggests that the distortion of the bcc structure results from the insertion of interstitial hydrides. The existence, number, and location of hydrides in these polyhydrido Cu NCs are established by combined experimental and DFT results. These results have significant implications for the development of high-nuclearity Cu hydride NCs with a non-fcc architecture.

Ammine(2,2'-bipyridine-kappa(2)N,N')silver(I) nitrate: a dimer formed by pi-pi stacking and ligand-unsupported Ag...Ag interactions.

Reaction of AgNO(3) and 2,2'-bipyridine (bipy) under ultrasonic treatment gave the title compound, [Ag(C(10)H(8)N(2))(NH(3))]NO(3). The crystal structure consists of dimers formed by two symmetry-related Ag(I)-bipy monomers connected through intra-dimer pi-pi stacking and ligand-unsupported Ag...Ag interactions. A crystallographic C2 axis passes through the mid-point of and is perpendicular to the Ag...Ag(i)(-x + 1, y, -z + 1/2) axis. In addition, each Ag(I) cation is coordinated by one chelating bipy ligand and one ammine ligand, giving a trigonal coordination environment capped by the symmetry-equivalent Ag atom. Molecules are assembled by Ag...Ag, pi-pi, hydrogen-bond (N-H...O and C-H...O) and weak Ag...pi interactions into a three-dimensional framework. Comparing the products synthesized under different mechanical treatments, we found that reaction conditions have a significant influence on the resulting structures. The luminescence properties of the title compound are also discussed.

Bis[diamminesilver(I)] 5-nitro-iso-phthalate monohydrate.

In the title compound, [Ag(NH(3))(2)](2)(C(8)H(3)NO(6))·H(2)O, the cations have an almost linear coordination geometry with two ammine ligands and inter-act with the water mol-ecules [Ag⋯O(water) = 2.725 (4) and 2.985 (4) Å]. In the crystal, N-H⋯O and O-H⋯O hydrogen bonds, combined with weak (lone pair)⋯π [O⋯centroid distance = 3.401 (4) Å] and π-π stacking [centroid-centroid distance = 3.975 (3) Å] inter-actions, stabilize the three-dimensional supra-molecular network.

New protective ligands for atomically precise silver nanoclusters.

Atomically precise silver nanoclusters (NCs) have emerged as a hot topic attracting immense research interest. Protecting ligands are needed for direct capping on cluster surfaces in order to prevent aggregation and to stabilize NCs. It has been demonstrated that protective ligands are critical to determining the sizes, structures and properties of silver NCs. The past decades have witnessed conventionally used organic ligands (thiolates/selenols, phosphines and alkynyls) and inorganic ligands (chalcogens and halogens) being extensively used to passivate NC surfaces. However, only in the most recent years have new-type protecting ligands beyond the conventional ones begun to be introduced in the protecting sphere of new functional silver NCs. The present Frontier article covers the most recent examples of some new protective agents for well-defined silver NCs. We describe four classes of novel silver NCs stabilized by newly-developed surface ligands, namely, nitrogen-donor organic ligands, oxygen-donor inorganic ligands, metalloligands and macrocyclic hosts, paying attention to the synthesis, structures and properties of these silver NCs. This Frontier article will hopefully attract more cluster scientists to explore more freshly ligated atomically precise silver NCs with novel structures and properties in the years ahead. The literature survey in this review is based on publications up to February 2020. Some suggestions for future directions in this field are also given.

Two novel silver(I) coordination polymers: poly[(mu2-2-aminopyrimidine-kappa2N1:N3)bis(mu3-thiocyanato-kappa3S:S:S)disilver(I)] and poly[(2-amino-4,6-dimethylpyrimidine-kappaN)(mu3-thiocyanato-kappa3N:S:S)silver(I)].

2-Aminopyrimidine (L1) and 2-amino-4,6-dimethylpyrimidine (L2) have been used to create the two novel title complexes, [Ag2(NCS)2(C4H5N3)]n, (I), and [Ag(NCS)(C6H9N3)]n, (II). The structures of complexes (I) and (II) are mainly directed by the steric properties of the ligands. In (I), the L1 ligand is bisected by a twofold rotation axis running through the amine N atom and opposite C atoms of the pyrimidine ring. The thiocyanate anion adopts the rare mu3-kappa3S coordination mode to link three tetrahedrally coordinated Ag(I) ions into a two-dimensional honeycomb-like 6(3) net. The L1 ligands further extend the two-dimensional sheet to form a three-dimensional framework by bridging Ag(I) ions in adjacent layers. In (II), with three formula units in the asymmetric unit, the L2 ligand bonds to a single Ag(I) ion in a monodentate fashion, while the thiocyanate anions adopt a mu3-kappa1N,kappa2S coordination mode to link the AgL2 subunits to form two-dimensional sheets. These layers are linked by N-H...N hydrogen bonds between the noncoordinated amino H atoms and both thiocyanate and pyrimidine N atoms.

catena-Poly[[[(iminodiacetato-kappaO)silver(I)]-mu3-2-aminopyrimidine-kappa3N1:N2:N3] monohydrate]: a one-dimensional silver(I) coordination polymer with mixed ligands.

The title compound, {[Ag(C4H6NO4)(C4H5N3)].H2O}n, was synthesized by the reaction of silver(I) nitrate with 2-aminopyrimidine and iminodiacetic acid. X-ray analysis reveals that the crystal structure contains a one-dimensional ladder-like Ag(I) coordination polymer and that N-H...O and O-H...O hydrogen bonding results in a three-dimensional network. The Ag(I) centre is four-coordinated by three N atoms from three different 2-aminopyrimidine ligands and one O atom from one iminodiacetate ligand. Comparison of the structural features with previous findings suggests that the existence of a second ligand plays an important role in the construction of such polymer frameworks.

Poly[bis(mu2-2-aminopyrazine-kappa2N1:N4)(mu2-nitrato-kappa2O:O)(nitrato-kappa2O,O')disilver(I)]: an achiral two-dimensional coordination polymer forming chiral crystals.

The solution reaction of AgNO(3) and 2-aminopyrazine (apyz) in a 1:1 ratio gives rise to the title compound, [Ag(2)(NO(3))(2)(C(4)H(5)N(3))(2)](n), (I), which possesses a chiral crystal structure. In (I), both of the crystallographically independent Ag(I) cations are coordinated in tetrahedral geometries by two N atoms from two apyz ligands and two O atoms from nitrate anions; however, the Ag(I) centers show two different coordination environments in which one is coordinated by two O atoms from two different symmetry-related nitrate anions and the second is coordinated by two O atoms from a single nitrate anion. The crystal structure consists of one-dimensional Ag(I)-apyz chains, which are further extended by mu(2)-kappa(2)O:O nitrate anions into a two-dimensional (4,4) sheet. N-H...O and C(apyz)-H...O hydrogen bonds connect neighboring sheets to form a three-dimensional supramolecular framework.