ABSTRACT
Covalent organic frameworks (COFs), featuring structural diversity, permanent porosity, and functional versatility, have emerged as promising electrode materials for rechargeable batteries. To date, amorphous polymer, COF, or their composites are mostly explored in lithium-ion batteries (LIBs), while their research in other alkali metal ion batteries is still in infancy. This can be due to the challenges that arise from large volume changes, slow diffusion kinetics, and inefficient active site utilization by the large Na+ or K+ ion. Herein, microwave-assisted imide-based 2D COF, TAPB-NDA covalently connected with amine-functionalized carbon nanotubes (TAPB-NDA@CNT) targeting the application in both Li-/Na-ion batteries, is synthesized. As-synthesized, TAPB-NDA@CNT50 displays the good performance as LIB cathode with a specific capacity of ≈138 mAh g-1 at 25 mA g-1, long cycling stability (81.2% retention after 2000 cycles at 300 mA g-1), with excellent reversible capacity retention of ≈79.6%. Similarly, TAPB-NDA@CNT50, when employed in sodium-ion battery (SIB), exhibited 136.7 mAh g-1 specific capacity at 25 mA g-1, retained ≈80% of the reversible capacity after 1000 cycles at 300 mA g-1 and showing excellent rate performance. The structural advantage of TAPB-NDA@CNT will encourage researchers to design COF-based cathodes for the alkali ion batteries.
ABSTRACT
The hydrogels, formed by self-assembly of predesigned, discrete metal-organic cubes (MOCs), have emerged as a new type of functional soft material whose diverse properties are yet to be explored. Here, we explore the proton conductivity of a MOC-based supramolecular porous framework {(Me2NH2)12[Ga8(ImDC)12]·DMF·29H2O} (1) (ImDC = 4,5-imidazole dicarboxylate) and derived hydrogel (MOC-G1). The intrinsic charge-assisted H-bonded (between anionic MOC {[Ga8(ImDC)12]12-} and dimethylammonium cations) framework 1 exhibits an ambient condition proton conductivity value of 2.3 × 10-5 S cm-1 (@40% RH) which increases with increasing temperature (8.2 × 10-4 S cm-1 at 120 °C and 40% RH) and follows the Grotthuss type of mechanism of proton conduction. Self-assembly of the MOCs in the presence of ammonium cations, as molecular binders, resulted in a hydrogel (MOC-G1) that shows directional H-bonded 1D nanotubular morphology. While guest water molecules are immensely important in deciding the proton conductivity of both 1 and MOC-G1, the presence of additional proton carriers, such as DMA and ammonium cations, resulted in at least 1 order increment in the proton conductivity of the latter (1.8 × 10-2 S cm-1) than the former (1.4 × 10-3 S cm-1) under 25 °C and 98% RH condition. The values of proton conductivity of 1 and MOC-G1 are comparable with those of the best proton conduction reports in the literature. This work may pave the way for the development of proton conductors with unique architecture and conductivity requisite for the state-of-the-art technologies by selecting appropriate MOC and molecular binders.
ABSTRACT
Efficient solar-driven syngas production (CO+H2 mixture) from CO2 and H2O with a suitable photocatalyst and fundamental understanding of the reaction mechanism are the desired approach towards the carbon recycling process. Herein, we report the design and development of an unique COF-topological quantum material nano-heterostructure, COF@TI with a newly synthesized donor-acceptor based COF and two dimensional (2D) nanosheets of strong topological insulator (TI), PbBi2Te4. The intrinsic robust metallic surfaces of the TI act as electron reservoir, minimising the fast electron-hole recombination process, and the presence of 6s2 lone pairs in Pb2+ and Bi3+ in the TI helps for efficient CO2 binding, which are responsible for boosting overall catalytic activity. In variable ratio of acetonitrile-water (MeCN : H2O) solvent mixture COF@TI produces syngas with different ratios of CO and H2. COF@TI nano-heterostructure enables to produce higher amount of syngas with more controllable ratios of CO and H2 compared to pristine COF. The electron transfer route from COF to TI was realized from Kelvin probe force microscopy (KPFM) analysis, charge density difference calculation, excited state lifetime and photoelectrochemical measurements. Finally, a probable mechanistic pathway has been established after identifying the catalytic sites and reaction intermediates by in situ DRIFTS study and DFT calculation.
ABSTRACT
The energy barrier to dissociate neutral water has been lowered by the differential intermediate binding on the charge-modulated metal centers of Co85Mo15 sheets supported on Ni-foam (NF), where the overpotential for hydrogen evolution reaction (HER) in 1â M phosphate buffer solution (PBS) is only 50±9â mV at -10â mA cm-2. It has a turnover frequency (TOF) of 0.18â s-1, mass activity of 13.2â A g-1 at -200â mV vs. reversible hydrogen electrode (RHE), and produces 16â ml H2 h-1 at -300â mV vs. RHE, more than double that of 20 % Pt/C. The Moδ+ and Coδ- sites adsorb OH*, and H*, respectively, and the electron injection from Co to H-O-H cleaves the O-H bond to form the Mo-OH* intermediate. Operando spectral analyses indicate a weak H-bonded network for facilitating the H2O*/OH* transport, and a potential-induced reversal of the charge density from Co to the more electronegative Mo, because of the electron withdrawing Co-H* and Mo-OH* species. Co85Mo15/NF can also drive the complete electrolysis of neutral water at only 1.73â V (10â mA cm-2). In alkaline, and acidic media, it demonstrates a Pt-like HER activity, accomplishing -1000â mA cm-2 at overpotentials of 161±7, and 175±22â mV, respectively.
ABSTRACT
The synthesis of covalent organic frameworks (COFs) at bulk scale require robust, straightforward, and cost-effective techniques. However, the traditional solvothermal synthetic methods of COFs suffer low scalability as well as requirement of sensitive reaction environment and multiday reaction time (2-10â days) which greatly restricts their practical application. Here, we report microwave assisted rapid and optimized synthesis of a donor-acceptor (D-A) based highly crystalline COF, TzPm-COF in second (10â sec) to minute (10â min) time scale. With increasing the reaction time from seconds to minutes crystallinity, porosity and morphological changes are observed for TzPm-COF. Owing to visible range light absorption, suitable band alignment, and low exciton binding energy (Eb=64.6â meV), TzPm-COF can efficaciously produce superoxide radical anion (O2 .-) after activating molecular oxygen (O2) which eventually drives aerobic photooxidative amidation reaction with high recyclability. This photocatalytic approach works well with a variety of substituted aromatic aldehydes having electron-withdrawing or donating groups and cyclic, acyclic, primary or secondary amines with moderate to high yield. Furthermore, catalytic mechanism was established by monitoring the real-time reaction progress through in situ diffuse reflectance infrared Fourier transform spectroscopic (DRIFTS) study.
ABSTRACT
Nature's design of biological ion channels that demonstrates efficient gating and selectivity brings to light a very promising model to mimic and design for achieving selective and tunable ion transport. Functionalized nanopores that permit modulation of the pore wall charges are a compelling approach to gain control over the ion transport mechanism through the pores. This makes way for employing a noncovalent supramolecular approach for attaining charge reversal of the MOF pore walls using donor-acceptor pairs that can demonstrate strong charge transfer interactions. Herein, robust Zr4+-based mesoporous MOF-808 was postsynthetically modified into an anion-selective nanochannel (MOF-808-MV) by modification with dicationic viologen-based motifs. Charge modulation and even reversal of the MOF-808-MV pore walls were then explored taking advantage of strong charge transfer interactions between the grafted dicationic viologen acceptor moieties and anionic, π-electron-rich donor guest molecules such as pyranine (PYR) and tetrathiafulvalene tetrabenzoic acid (TTF-TA). Tunability of the MOF pore charge from positive to neutral to negative was achieved via simple methodologies such as diffusion control in case of guest molecule like PYR and by pH modulation for pH-responsive guest like TTF-TA. This results in a concomitant modulation in the selectivity of the nanochannel, rendering it from anion-selective to ambipolar to cation-selective. Furthermore, as a real-time application of this ion channel, Na+ ion conductivity (σ = 3.5 × 10-5 S cm-1) was studied at ambient temperature.
ABSTRACT
Integrating photoactive π-chromophoric guest molecules inside the MOF nanopore can result in the emergence of light-responsive features, which in turn can be utilized for developing photoactive materials with inherent properties of MOF. Herein, we report the confining of π-chromophoric tetracene (TET) molecules inside the nanospace of postmodified Zr-MOF-808 (Zr-MOF) with MBA molecules (MBA = 2-(5'-methyl-[2,2'-bipyridine]-5-yl)acetic acid) for effectively utilizing its light-harvesting properties toward photocatalytic CO2 reduction. The confinement of the TET molecules as a photosensitizer and the covalent grafting of a catalytically active [Re(MBA)(CO)3Cl] complex, postsynthetically, result in a single integrated catalytic system named Zr-MBA-TET-Re-MOF. Photoreduction of CO2 over Zr-MBA-TET-Re-MOF showed the evolution of 805 µmol g-1 CO with 99.9% selectivity after 10 h of continuous visible light irradiation in water without any additional sacrificial electron donor and having the apparent quantum efficiency of 1.3%. In addition, the catalyst demonstrated an appreciable activity even under direct sunlight irradiation in aqueous medium with a maximum production of 362.7 µmol g-1 CO, thereby mimicking artificial photosynthesis. Moreover, electron transfer from TET to the catalytic center was supported by the formation of photoinduced TET radical cation, as inferred from in situ UV-vis spectra, electron paramagnetic resonance (EPR) analysis, and transient absorption (TA) studies. Additionally, the in situ diffuse reflectance infrared Fourier transform (DRIFT) measurements support that the photoreduction of CO2 to CO proceeds via *COOH intermediate formation. The close proximity of the light-harvesting molecule and catalytic center facilitated facile electron transfer from the photosensitizer to the catalyst during the CO2 reduction.
ABSTRACT
The self-assembly of a well-defined and astutely designed, low-molecular weight gelator (LMWG) based linker with a suitable metal ion is a promising method for preparing photocatalytically active coordination polymer gels. Here, we report the design, synthesis, and gelation behaviour of a tetrapodal LMWG based on a porphyrin core connected to four terpyridine units (TPY-POR) through amide linkages. The self-assembly of TPY-POR LMWG with RuII ions results in a Ru-TPY-POR coordination polymer gel (CPG), with a nanoscroll morphology. Ru-TPY-POR CPG exhibits efficient CO2 photoreduction to CO (3.5â mmol g-1 h-1 ) with >99 % selectivity in the presence of triethylamine (TEA) as a sacrificial electron donor. Interestingly, in the presence of 1-benzyl-1,4-dihydronicotinamide (BNAH) with TEA as the sacrificial electron donor, the 8e- /8H+ photoreduction of CO2 to CH4 is realized with >95 % selectivity (6.7â mmol g-1 h-1 ). In CPG, porphyrin acts as a photosensitizer and covalently attached [Ru(TPY)2 ]2+ acts as a catalytic center as demonstrated by femtosecond transient absorption (TA) spectroscopy. Further, combining information from the in situ DRIFT spectroscopy and DFT calculation, a possible reaction mechanism for CO2 reduction to CO and CH4 was outlined.
ABSTRACT
Achieving more than a two-electron photochemical CO2 reduction process using a metal-free system is quite exciting and challenging, as it needs proper channeling of electrons. In the present study, we report the rational design and synthesis of a redox-active conjugated microporous polymer (CMP), TPA-PQ, by assimilating an electron donor, tris(4-ethynylphenyl)amine (TPA), with an acceptor, phenanthraquinone (PQ). The TPA-PQ shows intramolecular charge-transfer (ICT)-assisted catalytic activity for visible-light-driven photoreduction of CO2 to CH4 (yield = 32.2 mmol g-1) with an impressive rate (2.15 mmol h-1 g-1) and high selectivity (>97%). Mechanistic analysis based on experimental results, in situ DRIFTS, and computational studies reveals that the potential of TPA-PQ for catalyzing photoreduction of CO2 to CH4 was energetically driven by photoactivated ICT upon surface adsorption of CO2, wherein adjacent keto groups of PQ unit play a pivotal role. The critical role of ICT for stimulating photocatalysis is further illustrated by synthesizing another redox-active CMP (TEB-PQ), bearing triethynylbenzene (TEB) and PQ, that shows 8-fold lesser activity for photoreduction toward CO2 to CH4 (yield = 4.4 mmol g-1) as compared to TPA-PQ. The results demonstrate a novel concept for CO2 photoreduction to CH4 using an efficient, sustainable, and recyclable metal-free robust organic photocatalyst.
ABSTRACT
The composite hydrogel of a nanoscale metal-organic framework (NMOF) and nanoclay has emerged as a new soft-material with advanced properties and applications. Herein, we report a facile synthesis of a hydrogel nanocomposite by charge-assisted self-assembly of Pd@ZIF-8 nanoparticles with Laponite® nanoclay which coat the surface of Pd@ZIF-8 nanoparticles. Such surface coating significantly enhanced the thermal stability of the ZIF-8 compared to the pristine framework. Further, the Pd@ZIF-8+LP hydrogel nanocomposite shows better size-selective catalytic hydrogenation of olefins than Pd@ZIF-8 nanoparticles based on selective diffusion of the substrate.
ABSTRACT
The design and synthesis of porous materials for selective capture of CO2 in the presence of water vapor is of paramount importance in the context of practical separation of CO2 from the flue gas stream. Here, we report the synthesis and structural characterization of a photoresponsive fluorinated MOF {[Cd(bpee)(hfbba)]·EtOH}n (1) constructed by using 4,4'-(hexafluoroisopropylidene)bis(benzoic acid) (hfbba), Cd(NO3)2, and 1,2-bis(4-pyridyl)ethylene (bpee) as building units. Due to the presence of the fluoroalkyl -CF3 functionality, compound 1 exhibits superhydrophobicity, which is validated by both water vapor adsorption and contact angle measurements (152°). The parallel arrangement of the bpee linkers makes compound 1 a photoresponsive material that transforms to {[Cd2(rctt-tpcb)(hfbba)2]·2EtOH}n (rctt-tpcb = regio cis,trans,trans-tetrakis(4-pyridyl)cyclobutane; 1IR) after a [2 + 2] cycloaddition reaction. The photomodified framework 1IR exhibits increased uptake of CO2 in comparison to 1 under ambient conditions due to alteration of the pore surface that leads to additional weak electron donor-acceptor interactions with the -CF3 groups, as examined through periodic density functional theory calculations. The enhanced uptake is also aided by an expansion of the pore window, which contributes to increasing the rotational entropy of CO2, as demonstrated through force field based free energy calculations.
ABSTRACT
Adsorptive chemical separation is at the forefront of future technologies, for use in chemical and petrochemical industries. In this process, a porous adsorbent selectively allows a single component from a mixture of three or more chemical components to be adsorbed or permeate. To separate the unsorted chemicals, a different adsorbent is needed. A unique adsorbent which can recognize and separate each of the chemicals from a mixture of three or more components is the necessity for the next generation porous materials. In this regard, we demonstrate a "dynamic chemical clip" in a supramolecular framework capable of thermodynamic and kinetics-based chemical separation. The dynamic space, featuring a strong preference for aromatic guests through π-π and C-Hâ â â π interactions and adaptability, can recognize the individual chemical isomers from mixtures and separate those based on thermodynamic and kinetic factors. The liquid-phase selectivity and separation of the aromatic isomers are possible by the adaptability of the "chemical clip" and here we elucidate the prime factors in a combinatorial approach involving crystallographic evidence and detailed computational studies.
ABSTRACT
The designing and development of heterogeneous catalysts for conversion of renewable energy to chemical energies by electrochemical as well as photochemical processes is at the forefront of energy research. In this work, two new donor-acceptor-based redox-active conjugated microporous polymers (CMPs) (TAPA-OPE-mix and TAPA-OPE-gly) are synthesized through Schiff base condensation reaction using a microwave synthesizer. Notably, the asymmetric and symmetric bola-amphiphilic nature of the OPE struts results in distinct nanostructuring and morphologies in the CMPs. Interestingly, both CMPs show impressive heterogeneous catalytic activity toward electrochemical O2 reduction and photocatalytic H2 evolution reactions, and therefore, act as bimodal electro- and photocatalytic porous organic materials. Furthermore, the redox-active property of the CMPs is exploited for inâ situ generation and stabilization of platinum nanoparticles (Pt), and these Pt@CMPs exhibit significantly enhanced photocatalytic activity.
ABSTRACT
Various hierarchical micro/mesoporous MOFs based on {[Al(µ-OH)(1,4-NDC)]â H2 O} (MOF1) with tunable porosities (pore volume and surface area) have been synthesized by assembling AlIII and 1,4-NDC (1,4-naphthalenedicarboxylate) under microwave irradiation by varying water/ethanol solvent ratio. Water/ethanol mixture has played a crucial role in the mesopore generation in MOF1M25 , MOF1M50 , and MOF1M75 , which is achieved by in situ formation of water/ethanol clusters. By adjusting the ratio of water/ethanol, the particle size, surface area and micro/mesopore volume fraction of the MOFs are controlled. Furthermore, reaction time plays a critical role in mesopore formation as realized by varying reaction time for the MOF with 50 % ethanol (MOF1M50 ). Additionally, hierarchical MOF (MOF1M50 ) has been used as a template for the stabilization of MAPbBr3 (MA=methylammonium) perovskite quantum dots (PQDs). MAPbBr3 PQDs are grown inside MOF1M50 , where mesopores control the size of PQDs which leads to quantum confinement.
ABSTRACT
Here, we report the influences of the C-H···O interaction, weaker than other conventional noncovalent interactions, on the guest-responsive structural modification of a photoactive metal-organic framework (MOF) and the impact on gas sorption properties. A photoactive pillared-layer three-dimensional MOF {[Cd(pzdc)(bpee)]2·3H2O}n (1) (where bpee = 1,2-bis(4-pyridyl)ethylene and pzdc = 2,3-pyrazinedicarboxylate) was synthesized and characterized. Compound 1 shows guest-responsive structural contraction by the movement of two-dimensional layers supported by the C-H···O interaction between the pillar (bpee) and layer (pzdc) linkers. Further, 1 was postsynthetically modified using light by exploiting the parallel arrangement of the olefinic double bondsof the bpee pillars based on a [2 + 2] cycloaddition reaction to produce {[Cd2(pzdc)2(rctt-tpcb)]·3H2O}n, (1IR) (rctt-tpcb = regio cis,trans,trans-tetrakis(4-pyridyl)cyclobutane) in a single-crystal-to-single-crystal transformation (SCSC) manner. The C-H···O interaction between the two linkers is not possible in the photomodified framework, and thus guest-responsive structural expansion is realized. Such a reversal of the structural transformation facilitates the enhanced CO2 uptake in 1IR with respect to 1 at their dehydrated states. Further, the photomodified compound 1IR does not uptake N2 and CH4 at 273 K and shows high selectivity as realized by an ideal adsorbed solution theory calculation. The facile diffusion of CO2 in the irradiated framework is also supported by the kinetic measurements based on MeOH adsorption isotherms at 293 K. Here, postsynthetic modification by a [2 + 2] photochemical reaction is the key to control the structural change for enhanced CO2 uptake capacity.
ABSTRACT
Creating hierarchical porosity in MOFs has attracted significant interest due to their immense potential in a wide range of applications from materials to life science. Herein, we report a unique methodology of combining perturbation assisted nanofusion (PNF) with microwave (MW) stimuli to generate wide additional pores from (5-18) nm in the prototype MOF, Ni-MOF-74. An optimized combination of microwave exposure, perturbation in form of stirring, and solvent effect induces additional mesoscale porosity by fusion of MOF nanoparticles. The effect of microwave is realized by varying reaction time and medium using a range of solvents having different dielectric constant (DMSO, DMF, DMA, acetone, EA, and THF). Introducing this method, for the first time, we are able to generate a wide scale mesopore by fusion of nanoscale microporous MOF within a short reaction time by vigorous stirring, without using any template. This additional mesopore, thus generated, has been exploited by encapsulating 4.6 µmol·g-1 of large biomolecule Vitamin B12 (VB12).
ABSTRACT
We report a one-step, solvent-free, green approach for the mechanochemical stabilization of hybrid organic-inorganic lead halide (MAPbBr3) perovskite quantum dots (PQDs) within perovskite metal-organic frameworks (MOFs) [MA-M(HCOO)3] [M = Mn and Co; MA = methylammonium (CH3NH3+)]. The perovskite MOF acts as a template and source of MA cations for growing and stabilizing hybrid PQDs. The synthesis of the composite has been carried out mechanochemically, without the use of any external reagents by simply grinding the perovskite MOF with PbBr2. MAPbBr3@MA-Mn(HCOO)3 composite shows high chemical stability in several solvents. Its excellent processability has been demonstrated by using it as an electrode material which shows photoelectrochemical activity in the presence of light.
ABSTRACT
Toward the goal of clean and sustainable energy source, the development of a trifunctional electrocatalyst is a boon for energy storage and conversion devices such as regenerative fuel cells and metal-air batteries. MOF-derived semiconducting-metallic core-shell electrocatalyst Co3O4@Co/NCNT (NCNT = nitrogen-doped carbon nanotube), which was shown to catalyze oxygen reduction reaction (ORR) and oxygen evolution reaction (OER), is also found to be an active electrocatalyst for hydrogen evolution reaction (HER) with a low overpotential of 171 mV. Here, the HER activity of Co3O4@Co/NCNT is presented and is shown as highly efficient and robust trifunctional electrocatalyst. The detailed theoretical calculation has found N-center of Co-N4 moiety to be the H+ binding active site and thus proves Co3O4@Co/NCNT to be active for HER. Further, the ORR and OER bifunctionality of Co3O4@Co/NCNT helped in fabricating secondary Zn-air battery with high power density of 135 mW/cm2. Also, an all-solid-state flexible and wearable battery with Co3O4@Co/NCNT as cathode and electrodeposited Zn on carbon fiber cloth as anode was shown to withstand its performance even under stressed conditions. Finally, the material being trifunctional in nature was used both as an anode and cathode material for the electrolysis of water, which was powered by the Zn-air batteries with Co3O4@Co/NCNT as the cathode material. It is believed that the development of a trifunctional catalyst would help in wide commercialization of regenerative fuel cells.
ABSTRACT
Purification of ethylene by removing acetylene from an ethylene/acetylene (99/1 v/v) mixture is a challenging task in the petrochemical industry. Our effort toward finding new porous materials that can selectively uptake acetylene resulted in two 3D metal-organic frameworks. Compound 1, {[Zn(p-pda)(bpee)]} (p-pda = p-phenylenediacetate and bpee = 1,2-bis(4-pyridyl)ethylene) turned out to be a nonporous structure due to the presence of a bulky and rigid aromatic ring in the p-pda ligand. Interestingly, replacement of p-pda with succinic acid yields the microporous framework {[Zn2(µ3-OH)(suc)1.5(bpee)]·CH3OH·2H2O} (2; suc = succinate), which offers a 1D channel along the a direction occupied by guest methanol and water molecules. Remarkably, the desolvated framework of 2 shows selective uptake of C2H2 over other gas molecules such as C2H4, C2H6, CO2 and CH4 at 293 K. An ideal absorbed solution theory (IAST) study predicts a high selectivity value for acetylene adsorption over the other gas molecules mentioned above. The efficiency of removal of acetylene from ethylene/acetylene mixtures containing 1% acetylene was established through a column breakthrough experiment performed at room temperature. The performance of our material in the purification of ethylene by removing acetylene is comparable with those reported in the literature. In the frameworks of both 1 and 2, the ethylenic double bonds of adjacent bpee linkers are aligned parallel and readily undergo [2 + 2] cycloaddition reactions upon UV-light irradiation to yield {[Zn2(p-pda)2(rctt-tpcb)]} (1IR) and {[Zn4(µ3-OH)2(suc)3(rctt-tpcb)]·2CH3OH·4H2O} (2IR), respectively (rctt-tpcb = regio-cis,trans,trans-tetrakis(4-pyridyl)cyclobutane). Photochemical structural transformations of 100% were observed in single-crystal to single-crystal fashions, which were also supported by 1H NMR spectroscopy. The structures of both 2 and 2IR underwent temperature-dependent reversible structural transformations, which was confirmed by SCXRD and DSC analysis. Selective C2H2 uptake of the dehydrated framework of 2IR was also examined, which demonstrates results similar to those of 2.
ABSTRACT
Here, we demonstrate mimicking of photophysical properties of native green fluorescent protein (gfp) by immobilizing the gfp chromophore analogues in nanoscale MOF-808 and further exploring the bioimaging applications. The two virtually nonfluorescent gfp chromophore analogues carrying different functionalities, BDI-AE (COOH/COOMe) and BDI-EE (COOMe/COOMe) were immobilized in nanosized MOF-808 via postsynthetic modification. An 1H NMR and IR study confirms that BDI-AE was coordinated in NMOF-808, whereas BDI-EE was just noncovalently encapsulated. Interestingly, the extremely weakly fluorescent monomers BDI-AE and BDI-EE (QY = 0.01-0.03%, lifetime = 0.01-0.03 ns) showed a 102-fold increase in quantum efficiency with a significantly longer excited-state lifetime (QY = 1.8-5.6%, lifetime 0.89-1.49 ns) after immobilization in the NMOF-808 scaffold. Moreover, BDI-AE@MOF-808 has 4 times higher quantum efficiency as well as longer excited-state lifetime in comparison to BDI-EE@NMOF-808 due to the rigidity imposed in the chromophore upon coordination with Zr4+ in the former case. Further, a cell viability test performed for BDI-AE@NMOF-808 in HeLa cells confirmed the nontoxic nature of the material and, more importantly, bioimaging applications have also been explored successfully.