Fluorescent sensing platform based on polyethyleneimine-protected copper nanoclusters for detection of chromium(VI) in real samples.

A new type of polyethyleneimine-protected copper nanoclusters (PEI-CuNCs) is favorably developed by a one-pot method under mild conditions. The obtained PEI-CuNCs is characterized by X-ray diffraction, X-ray photoelectron spectroscopy, transmission electron microscopy, Fourier-transform infrared (FTIR) spectroscopy and other techniques. It is worth noting that the proposed PEI-CuNCs demonstrate a selective response to chromium(VI) over other competitive species. Fluorescence quenching of PEI-CuNCs is determined to be chromium(VI) concentrations dependence with a low limit of detection of 8.9 nM. What is more, the as-developed PEI-CuNCs is further employed in building a detection platform for portable recognition of chromium(VI) in real samples with good accuracy. These findings may offer a distinctive strategy for the development of methods for analyzing and monitoring chromium(VI) and expand their application in real sample monitoring.

Size-dependent electrophoretic migration and separation of water-soluble gold nanoclusters by capillary electrophoresis.

Recently, water-soluble gold nanoclusters (AuNCs) have attracted more and more attention due to their unique properties. In this study, penicillamine-protected gold nanoclusters (Pen-AuNCs) were synthesized and initially fractionated by sequential size-selective precipitation (SSSP). The crude Pen-AuNCs and SSSP fractions were separated by capillary zone electrophoresis (CZE) with a diode array detector. The effects of key parameters, including the concentration of phosphate buffer, pH value and the ethanol content were systematically investigated. The separation of water-soluble poly-disperse AuNCs were well achieved at 30 mM phosphate buffer with 7.5% EtOH, pH 12.0, and applied voltage of 15 kV. The linear correlation between AuNCs diameter and mobility was observed. This finding provides an important reference for CE separation and product purification of water-soluble AuNCs or other nanomaterials.

Silver-doped graphite carbon nitride nanosheets as fluorescent probe for the detection of curcumin.

Green fluorescent silver (Ag)-doped graphite carbon nitride (Ag-g-C3 N4 ) nanosheets have been fabricated by an ultrasonic exfoliating method. The fluorescence of the Ag-g-C3 N4 nanosheets is quenched by curcumin. The fluorescence intensity decreases with the increase in the concentration of curcumin, indicating that the Ag-g-C3 N4 nanosheets can function as a non-toxic and facile fluorescence probe to detect curcumin. The fluorescence intensity of Ag-g-C3 N4 nanosheets shows a linear relationship to curcumin in the concentration range 0.01-2.00 µM with a low detection limit of 38 nM. The fluorescence quenching process between curcumin and Ag-g-C3 N4 nanosheets mainly is based on static quenching. The fluorescent probe has been successfully applied to analyse curcumin in human urine and serum samples with satisfactory results.

Boron and nitrogen co-doped carbon dots as a sensitive fluorescent probe for the detection of curcumin.

In this present study, a fluorescent probe was developed to detect curcumin, which is derived from the rhizomes of the turmeric. We used a simple and economical way to synthesize boron and nitrogen co-doped carbon dots (BNCDs) by microwave heating. The maximum emission wavelength of the BNCDs was 450 nm at an excitation wavelength of 360 nm. The as-prepared BNCDs were characterized by multiple analytical techniques such as transmission electron microscopy, X-ray photoelectron spectroscopy, X-ray diffraction, and infrared spectroscopy. The synthesized carbon nanoparticles had an average particle diameter of 4.23 nm. The BNCDs exhibited high sensitivity to the detection of curcumin at ambient conditions. The changes of BNCDs fluorescent intensity show a good linear relationship with the curcumin concentrations in the range 0.2-12.5 µM. This proposed method has been successfully applied to detect the curcumin in urine samples with the recoveries of 96.5-105.5%.

Graphitic carbon nitride quantum dots as an "off-on" fluorescent switch for determination of mercury(II) and sulfide.

A rapid method has been developed for the determination of Hg(II) and sulfide by using graphitic carbon nitride quantum dots (g-CNQDs) as a fluorescent probe. The interaction between Hg(II) and g-CNQDs leads to the quenching of the blue g-CNQD fluorescence (with excitation/emission peaks at 390/450 nm). However, the fluorescence can be recovered after addition of sulfide such that the "turn-off" state is switched back to the "turn-on" state. The g-CNQDs were fully characterized by transmission electron microscopy, X-ray diffractometry, X-ray photoelectron spectroscopy, Fourier transform infrared spectroscopy, UV-vis absorption and fluorescence spectroscopy. Under the optimal experimental conditions, this probe is highly selective and sensitive to Hg(II). The linear response to Hg(II) extends from 0.20 to 21 µM with a detection limit of 3.3 nM. In addition, sulfide can be detected via the recovery of fluorescence. The linear response range for sulfide species is from 8.0 to 45 µM with a detection limit of 22 nM. The mechanism of the "turn-off-on" scheme is discussed. The methods have been applied to the analysis of spiked tap water, lake water and wastewater samples. Graphical abstract Schematic of an off-on fluorescent probe for mercury(II). The fluorescence of graphitic carbon nitride quantum dots (g-CNQDs) is quenched by Hg2+ but is recovered after reacting with S2- as it can combine with Hg2+ on the surface of g-CNQDs.

Capillary electrophoretic study of green fluorescent hollow carbon nanoparticles.

CE coupled with laser-induced fluorescence and UV absorption detections has been applied to study the complexity of as-synthesized green fluorescent hollow carbon nanoparticles (HC-NP) samples. The effects of pH, type, and concentration of the run buffer and SDS on the separation of HC-NP are studied in detail. It is observed that phosphate run buffer is more effective in separating the HC-NP and the optimal run buffer is found to be 30 mM phosphate and 10 mM SDS at pH 9.0. The CE separation of this HC-NP is based on the difference in size and electrophoretic mobility of HC-NP. Some selected HC-NP fractions are collected and further characterized by UV-visible absorption and photoluminescence (PL) spectroscopy, MS, and transmission electron microscopy. The fractionated HC-NP show profound differences in absorption, emission characteristics, and PL quantum yield that would have been otherwise misled by studying the complex mixture alone. It is anticipated that our CE methodology will open a new initiative on extensive studies of individual HC-NP species in the biomedical, catalysis, electronic, and optical device, energy storage, material, and sensing field.

Optimization and validation of an HPLC-photodiode array detector method for determination of organic acids in vinegar.

A novel isocratic RP-HPLC method with UV photodiode array detection for the determination of seven organic acids in vinegar samples was developed and optimized. Samples were analyzed on a C18 (150 × 4.6 mm id, 5 µm) analytical column. Methanol-0.010 M sodium dihydrogen phosphate buffer adjusted with H3PO4 to pH 2.80 (2 + 98, v/v), was used as the mobile phase. The column oven temperature was optimized at 23.0°C, the flow rate was 0.80 mL/min, and the detection wavelength was 210 nm. Matrix-matched calibration curves were prepared for all analytes, and the correlation coefficients were greater than 0.99. LOD and LOQ ranged from 0.10 to 10.0 and 0.30 to 30.0 µg/mL, respectively. The results for interday and intraday precision and accuracy fell within the ranges specified. Vinegar samples were quantified by the standard addition method. The main advantages of this method are its selectivity, which is one of the main weaknesses of most methods when determining organic acids in complex matrixes, and its simplicity since little sample preparation is needed. Moreover, it is safe and inexpensive with low organic solvent usage.

Design of ratiometric emission probe with visible light excitation for determination of Ca2+ in living cells.

An organic salt as a fluorescent probe based on intramolecular charge transfer for Ca(2+) determination is developed. Ca(2+) can be detected by ratiometric emission at 490 and 594 nm with an excitation wavelength of 405 nm. This probe is highly selective for Ca(2+) over other divalent metal cations and displays a large Stokes shift of 189 nm that can avoid interference of the excitation light beam and autofluorescence of biological samples. The dissociation constant for Ca(2+) is 2.25 ± 0.47 µM and pertinent to Ca(2+) detection in cellular resting and dynamic states. The probe demonstrates its application in monitoring Ca(2+) in living cells under confocal microscopic imaging.

Determination of doxorubicin in plasma by using CE coupled with in-column tapered optic-fiber light-emitting diode induced fluorescence detection.

This paper proposes a novel strategy to enhance detection of doxorubicin in human plasma, using homemade CE combined with normal stacking mode (NSM). The detection system of CE named as in-column tapered optic-fiber light-emitting diode induced fluorescence detection system is economic and more sensitive that has been demonstrated in our previous work. The influence of sample matrix, BGE, applied voltage, and injection time on the efficiency of NSM were systematically investigated. The clean extracts were subjected to CE separation with optimal experimental conditions: Ethanol-water (1:1, v/v) was used as sample matrix, pH 4.12 15 mM sodium phosphate buffer solution containing 70% v/v ACN, applied voltage 23 kV and 45 s hydrodynamic injection at a height of 20 cm. The detection system displayed linear dynamic range from 6.4 to 1.13 × 10(3) ng/mL with a correlation coefficient of 0.9990 and LOD 2.2 ng/mL for doxorubicin (DOX). The proposed CE method has been successfully applied to determine DOX in human plasma which the recoveries of standard DOX added to human plasma were found to been the range of 93.8-104.6%. The results obtained demonstrate that our detection system combined with NSM is a good idea to enhance sensitivity in CE for routine determination of DOX in some biological specimens.

Better understanding of carbon nanoparticles via high-performance liquid chromatography-fluorescence detection and mass spectrometry.

RP-HPLC coupled with fluorescence detection for separation of carbon nanoparticles (CNP) synthesized with microwave-assisted pyrolysis of citric acid and 1,2-ethylenediamine is presented. The influence of methanol content and pH of mobile phase on the separation of CNP has been investigated. Under optimal mobile phase and elution gradient conditions, the effect of mole ratio of amine to carboxylic groups (NH2 /COOH) in the initial reagents on CNP product is studied. At NH2 /COOH = 0.67, the strongest fluorescence CNP sample is obtained. The separated CNP fractions are collected and further characterized by UV-visible absorption and photoluminescence (PL) spectroscopy, CE, transmission electron microscopy (TEM), and MALDI-TOF MS. The absorption and PL emission bands of the fractions are bathochromatically shifted with the elution order of CNP on RP-HPLC. The TEM images prove that CNP are eluted from the smallest to the largest. The MS data show that CNP undergo fragmentations, closely relating to their surface-attached carboxylic acid and amide/amine moieties. This work highlights the merit of RP-HPLC coupled with fluorescence detection, TEM, and MS for isolation and characterization of individual CNP species present in a CNP sample.

3-aminophenylboronic acid modified carbon nitride quantum dots as fluorescent probe for selective detection of dopamine and cell imaging.

Dopamine (DA) is the most abundant catecholamine neurotransmitter in the brain and plays an extremely essential role in the physiological activities of the living organism. There is a critical need for accurately and efficiently detecting DA levels in organisms in order to reflect physiological states. Carbon nitride quantum dots (C3N4) were, in recent years, used enormously as electrochemical and fluorescence probes for the detection of metal ions, biomarkers and other environmental or food impurities due to their unique advantageous optical and electronic properties. 3-Aminophenylboronic acid (3-APBA) can specifically combine with DA through an aggregation effect, providing an effective DA detection method. In this work, 3-APBA modified carbon nitride quantum dots (3-APBA-CNQDs) were synthesized from urea and sodium citrate. The structure, chemical composition and optical properties of 3-APBA-CNQDs were investigated by XRD, TEM, UV-visible, and FT-IR spectroscopy. The addition of DA could induce fluorescence quenching of 3-APBA-CNQDs possibly through the inner filter effect (IFE). 3-APBA-CNQDs shows better selectivity and sensitivity to DA than other interfering substances. By optimizing the experiment conditions, good linearity was obtained at 0.10-51µM DA with a low detection limit of 22.08 nM. More importantly, 3-APBA-CNQDs have been successfully applied for the detection of DA in human urine and blood samples as well as for bioimaging of intracellular DA. This study provides a promising novel method for the rapid detection of DA in real biological samples.

Mesoporous Graphene Oxide Nanocomposite Effective for Combined Chemo/Photo Therapy Against Non-Small Cell Lung Cancer.

Introduction: Lung cancer is the most common cancer worldwide, among which non-small cell lung cancer (NSCLC) accounts for about 80% of all lung cancers. Chemotherapy, a mainstay modality for NSCLC, has demonstrated restricted effectiveness due to the emergence of chemo-resistance and systemic side effects. Studies have indicated that combining chemotherapy with phototherapy, such as photodynamic therapy (PDT) and photothermal therapy (PTT), can enhance efficacy of therapy. In this work, an aminated mesoporous graphene oxide (rPGO)-protoporphyrin IX (PPIX)-hyaluronic acid (HA)@Osimertinib (AZD) nanodrug delivery system (rPPH@AZD) was successfully developed for combined chemotherapy/phototherapy for NSCLC. Methods: A pH/hyaluronidase-responsive nanodrug delivery system (rPPH@AZD) was prepared using mesoporous graphene oxide. Its morphology, elemental composition, surface functional groups, optical properties, in vitro drug release ability, photothermal properties, reactive oxygen species production, cellular uptake and cell viability were evaluated. In addition, the in vivo therapeutic effect, biocompatibility, and imaging capabilities of rPPH@AZD were verified by a tumor-bearing mouse model. Results: Aminated mesoporous graphene oxide (rPGO) plays a role as a drug delivery vehicle owing to its large specific surface area and ease of surface functionalization. rPGO exhibits excellent photothermal conversion properties under laser irradiation, while PPIX acts as a photosensitizer to generate singlet oxygen. AZD acts as a small molecule targeted drug in chemotherapy. In essence, rPPH@AZD shows excellent photothermal and fluorescence imaging effects in tumor-bearing mice. More importantly, in vitro and in vivo results indicate that rPPH@AZD can achieve hyaluronidase/pH dual response as well as combined chemotherapy/PTT/PDT anti-NSCLC treatment. Conclusion: The newly prepared rPPH@AZD can serve as a promising pH/hyaluronidase-responsive nanodrug delivery system that integrates photothermal/fluorescence imaging and chemo/photo combined therapy for efficient therapy against NSCLC.

New light shed on charge transfer in fundamental H+ + H2 collisions.

There is no consensus on the magnitude and shape of the charge transfer cross section in low-energy H+ + H2 collisions, in spite of the fundamental importance of these collisions. Experiments have thus been carried out in the energy range 15≤E≤5000 eV. The measurements invalidate previous recommended data for E≤200 eV and confirm the existence of a local maximum around 45 eV, which was predicted theoretically. Additionally, vibrationally resolved cross sections allow us to investigate the evolution of the underlying charge transfer mechanism as a function of E.

A novel ratiometric emission probe for Ca2+ in living cells.

A ratiometric fluorescent probe for Ca(2+) based on 1,3,4-oxadiazole derivative has been designed and developed. The probe exhibits a large Stokes shift of 202 nm and a highly selective ratiometric emission response (490/582 nm) to Ca(2+) over other metal cations. Additionally, the probe can readily reveal the changes of intracellular Ca(2+) concentration in living human umbilical vein endothelial cells.

Combination of pentafluorophenylhydrazine derivatization and isotope dilution LC-MS/MS techniques for the quantification of apurinic/apyrimidinic sites in cellular DNA.

Apurinic/apyrimidinic (AP) sites are common DNA lesions arising from spontaneous hydrolysis of the N-glycosidic bond and base-excision repair mechanisms of the modified bases. Due to the strong association of AP site formation with physically/chemically induced DNA damage, quantifying AP sites provides important information for risk assessment of exposure to genotoxins and oxidative stress. However, rigorous quantification of AP sites in DNA has been hampered by technical problems relating to the sensitivity and selectivity of existing analytical methods. We have developed a new isotope dilution liquid chromatography-coupled tandem mass spectrometry (LC-MS/MS) method for the rigorous quantification of AP sites in genomic DNA. The method entails enzymatic digestion of AP site-containing DNA by endo- and exonucleases, derivatization with pentafluorophenylhydrazine (PFPH), addition of an isotopically labeled PFPH derivative as internal standard, and quantification by LC-MS/MS. The combination of PFPH derivatization with LC-MS/MS analysis on a triple quadrupole mass spectrometer allows for sensitive and selective quantification of AP sites in DNA at a detection limit of 6.5 fmol, corresponding to 4 AP sites/10(9) nt in 5 µg of DNA, which is at least ten times more sensitive than existing analytical methods. The protocol was validated by AP site-containing oligonucleotides and applied in quantifying methyl methanesulfonate-induced formation of AP sites in cellular DNA.

Microcalorimetric investigation of the effect of non-ionic surfactant on biodegradation of pyrene by PAH-degrading bacteria Burkholderia cepacia.

Polycyclic aromatic hydrocarbons (PAHs) are widespread in various ecosystems and are pollutants of great concern due to their potential toxicity, mutagenecity and carcinogenicity. Surfactant has become a hot topic for its wide application in the bioremediation of PAHs. The aim of this work is to explore a microcalorimetric method to determine the toxic effect of pyrene on Bacillus subtilis (B. subtilis) and the PAH-degrading bacteria Burkholderia cepacia (B. cepacia) and to evaluate the effect of Tween 80 on biodegradation of pyrene. Power-time curves were studied and calorimetric parameters including the growth rate constant (k), half inhibitory concentration (IC50), and total thermal effect (Q(T)) were determined. B. subtilis, B. cepacia and B. cepacia with Tween 80 were completely inhibited when the concentration of pyrene were 200, 800 and 1600 µg mL⁻¹, respectively. B. cepacia shows better tolerance to pyrene than B. subtilis. Tween 80 significantly improves the biodegradation of pyrene by increasing the bioavailability of pyrene. In addition, the expression of catechol 2,3-dioxygenase (C23O) in B. cepacia is responsible for the degradation of pyrene and plays an important role in improving the biodegradation of pyrene. Moreover, the activity of C23O increases with the application of Tween 80. The enhanced bioavailability and biodegradation of pyrene by Tween 80 shows the potential use of Tween 80 in the PAHs bioremediation.

Mass spectrometric identification of water-soluble gold nanocluster fractions from sequential size-selective precipitation.

This paper presents a simple and convenient methodology to separate and characterize water-soluble gold nanocluster stabilized with penicillamine ligands (AuNC-SR) in aqueous medium by sequential size-selective precipitation (SSSP) and mass spectrometry (MS). The highly polydisperse crude AuNC-SR product with an average core diameter of 2.1 nm was initially synthesized by a one-phase solution method. AuNCs were then precipitated and separated successively from larger to smaller ones by progressively increasing the concentration of acetone in the aqueous AuNCs solution. The SSSP fractions were analyzed by UV-vis spectroscopy, matrix-assisted laser desorption/ionization time-of-flight-MS, and thermogravimetric analysis (TGA). The MS and TGA data confirmed that the fractions precipitated from 36, 54, 72, and 90% v/v acetone (F(36%), F(54%), F(72%), and F(90%)) comprised families of close core size AuNCs with average molecular formulas of Au(38)(SR)(18), Au(28)(SR)(15), Au(18)(SR)(12), and Au(11)(SR)(8), respectively. In addition, F(36%), F(54%), F(72%), and F(90%) contained also the typical magic-sized gold nanoparticles of Au(38), Au(25), Au(18), and Au(11), respectively, together with some other AuNCs. This study shed light on the potential use of SSSP for simple and large-scale preliminary separation of polydisperse water-soluble AuNCs into different fractions with a relatively narrower size distribution.

Electrogenerated chemiluminescence behavior of graphite-like carbon nitride and its application in selective sensing Cu2+.

This paper reports for the first time the electrogenerated chemiluminescence (ECL) behavior of graphite-like carbon nitride (g-C(3)N(4)) with K(2)S(2)O(8) as the coreactant. The possible ECL reaction mechanisms are proposed. The spectral features of the ECL emission and photoluminescence (PL) of g-C(3)N(4) are compared, and their resemblance demonstrates that the excited states of g-C(3)N(4) from both ECL and photoexcitation are the same. The effects of K(2)S(2)O(8) concentration, pH, g-C(3)N(4)/carbon powder ratio, and scan rate on the ECL intensity have been studied in detail. Furthermore, it is observed that the ECL intensity is efficiently quenched by trace amounts of Cu(2+). g-C(3)N(4) is thus employed to fabricate an ECL sensor which shows high selectivity to Cu(2+) determination. The limit of detection is determined as 0.9 nM. It is anticipated that g-C(3)N(4) could be a new class of promising material for fabricating ECL sensors.

Sulfur-doped graphitic carbon nitride nanosheets as a sensitive fluorescent probe for detecting environmental and intracellular Ag.

Silver is widely used in medical materials, photography, electronics and other industries as a precious metal. The large-scale industrial production of silver-containing products and liquid waste emissions aggravate the environmental pollution. Silver ion is one of the most toxic metal ions, causing pollution to the environment and damage to public health. Therefore, the efficient and sensitive detection of Ag+in the water environment is extremely important. Sulfur-doped carbon nitride nanosheets (SCN Ns) were prepared by melamine and thiourea via high-temperature calcination. The morphology, chemical composition and surface functional groups of the SCN Ns were characterized by SEM, TEM, XRD, XPS, and FT-IR. The fluorescence of SCN Ns was gradually quenched as the Ag+concentration increased. The detection limit for Ag+was as low as 0.28 nM. The quenching mechanism mainly is attributed to static quenching. In this paper, SCN Ns were used as the fluorescent probe for detecting Ag+. SCN Ns have successfully detected Ag+in different environmental aqueous samples and cells. Finally, SCN Ns were further applied to the visual quantitative detection of intracellular Ag+.

Facile synthesis of sulfur and oxygen co-doped graphitic carbon nitride quantum dots for on-off detection of Cu2+in real samples and living cells.

A fluorescent sulfur and oxygen co-doped graphitic carbon nitride quantum dots (S,O-CNQDs) were prepared from ethylenediaminetetraacetic acid disodium salt dihydrate and thiourea as the carbon and sulfur sources. The morphology and surface functional groups of S,O-CNQDs were characterized by X-ray diffraction, transmission electron microscopy, X-ray photoelectron spectroscopy and Fourier transform infrared spectroscopy. The fluorescence of S,O-CNQDs could be quenched efficiently by Cu2+under the optimum conditions. The S,O-CNQDs could function as an excellent fluorescent probe for Cu2+detection with a wide linear range of 0.50-15µM and a low detection limit of 0.58 nM. In addition, this fluorescent probe was employed for monitoring Cu2+in samples of tap water, lake water, human serum and urine with good recoveries from 99.0% to 110.0%. Moreover, the S,O-CNQDs with high cell penetration and low cytotoxicity were utilized for Cu2+detection in living cells. Owing to the excellent properties of S,O-CNQDs, the as-prepared S,O-CNQDs can be a potential candidate for biological applications.