Water-alcohol-TiO2 dispersions as sustainable ink.

Nanocrystalline titanium dioxide (TiO2) is a widespread multifunctional and environmentally friendly material that has numerous applications requiring micro-/nanofabrication or thin film deposition. In most cases, the fabrication of titania films can be achieved using cost-efficient solution chemistry combined with various coating or printing techniques. The practical implementation of these methods requires the preparation of a suitable ink with properly adjusted rheological properties. Conventionally, such adjustments are achieved based on TiO2 hydrosols containing various organic surfactants and stabilizing agents. However, the use of such additives may affect the properties of the deposited functional layer, which can be crucial for electronic and optical applications. In this work, we address a comprehensive study of simple surfactant-free TiO2 dispersion systems based on various water-alcohol solvents and demonstrate the possibility of controlling the rheological properties of the titania ink in a wide range that is suitable for several printing applications. As a particular example, we demonstrate the application of a water-i-propanol-TiO2 dispersion as a functional ink for the offset printing of interference images.

Dimensionality Mediated Highly Repeatable and Fast Transformation of Coordination Polymer Single Crystals for All-Optical Data Processing.

A family of coordination polymers (CPs) based on dynamic structural elements are of great fundamental and commercial interest addressing modern problems in controlled molecular separation, catalysis, and even data processing. Herein, the endurance and fast structural dynamics of such materials at ambient conditions are still a fundamental challenge. Here, we report on the design of a series of Cu-based CPs [Cu(bImB)Cl2] and [Cu(bImB)2Cl2] with flexible ligand bImB (1,4-bis(imidazol-1-yl)butane) packed into one- and two-dimensional (1D, 2D) structures demonstrating dimensionality mediated flexibility and reversible structural transformations. Using the laser pulses as a fast source of activation energy, we initiate CP heating followed by anisotropic thermal expansion and 0.2-0.8% volume changes with the record transformation rates from 2220 to 1640 s-1 for 1D and 2D CPs, respectively. The endurance over 103 cycles of structural transformations, achieved for the CPs at ambient conditions, allows demonstrating optical fiber integrated all-optical data processing.

Insights into Solid-To-Solid Transformation of MOF Amorphous Phases.

Metal-organic frameworks (MOFs) have been recently explored as crystalline solids for conversion into amorphous phases demonstrating non-specific mechanical, catalytic, and optical properties. The real-time control of such structural transformations and their outcomes still remain a challenge. Here, we use in situ high-resolution transmission electron microscopy with 0.01 s time resolution to explore non-thermal (electron induced) amorphization of a MOF single crystal, followed by transformation into an amorphous nanomaterial. By comparing a series of M-BTC (M: Fe3+, Co3+, Co2+, Ni2+, and Cu2+; BTC: 1,3,5-benzentricarboxylic acid), we demonstrate that the topology of a metal cluster of the parent MOFs determines the rate of formation and the chemistry of the resulting phases containing an intact ligand and metal or metal oxide nanoparticles. Confocal Raman and photoluminescence spectroscopies further confirm the integrity of the BTC ligand and coordination bond breaking, while high-resolution imaging with chemical and structural analysis over time allows for tracking the dynamics of solid-to-solid transformations. The revealed relationship between the initial and resulting structures and the stability of the obtained phase and its photoluminescence over time contribute to the design of new amorphous MOF-based optical nanomaterials.

Study by Optical Spectroscopy of Bismuth Emission in a Nanosecond-Pulsed Discharge Created in Liquid Nitrogen.

Time-resolved optical emission spectroscopy of nanosecond-pulsed discharges ignited in liquid nitrogen between two bismuth electrodes is used to determine the main discharge parameters (electron temperature, electron density and optical thickness). Nineteen lines belonging to the Bi I system and seven to the Bi II system could be recorded by directly plunging the optical fibre into the liquid in close vicinity to the discharge. The lack of data for the Stark parameters to evaluate the broadening of the Bi I lines was solved by taking advantage of the time-resolved information supported by each line to determine them. The electron density was found to decrease exponentially from 6.5 ± 1.5 × 1016 cm-3 200 ns after ignition to 1.0 ± 0.5 × 1016 cm-3 after 1050 ns. The electron temperature was found to be 0.35 eV, close to the value given by Saha's equation.

All-Dielectric Nanostructures with a Thermoresponsible Dynamic Polymer Shell.

We suggest a new strategy for creating stimuli-responsive bio-integrated optical nanostructures based on Mie-resonant silicon nanoparticles covered by an ensemble of similarity negatively charged polyelectrolytes (heparin and sodium polystyrene sulfonate). The dynamic tuning of the nanostructures' optical response is due to light-induced heating of the nanoparticles and swelling of the polyelectrolyte shell. The resulting hydrophilic/hydrophobic transitions significantly change the shell thickness and reversible shift of the scattering spectra for individual nanoparticles up to 60 nm. Our findings bring novel opportunities for the application of smart nanomaterials in nanomedicine and bio-integrated nanophotonics.

Photochromic Free MOF-Based Near-Infrared Optical Switch.

We demonstrate herein an all-optical switch based on stimuli-responsive and photochromic-free metal-organic framework (HKUST-1). Ultrafast near-infrared laser pulses stimulate a reversible 0.4 eV blue shift of the absorption band with up to 200 s-1 rate due to dehydration and concomitant shrinking of the structure-forming [Cu2 C4 O8 ] cages of HKUST-1. Such light-induced switching enables the remote modulation of intensities of photoluminescence of single crystals of HKUST-1 as well visible radiation passing through the crystal by 2 order of magnitude. This opens up the possibility of utilyzing stimuli-responsive MOFs for all-optical data processing devices.

Resonant Nonplasmonic Nanoparticles for Efficient Temperature-Feedback Optical Heating.

We propose a novel photothermal approach based on resonant dielectric nanoparticles, which possess imaginary part of permittivity significantly smaller as compared to metal ones. We show both experimentally and theoretically that a spherical silicon nanoparticle with a magnetic quadrupolar Mie resonance converts light to heat up to 4 times more effectively than similar spherical gold nanoparticle at the same heating conditions. We observe photoinduced temperature raise up to 900 K with the silicon nanoparticle on a glass substrate at moderate intensities (<2 mW/µm2) and typical laser wavelength (633 nm). The advantage of using crystalline silicon is the simplicity of local temperature control by means of Raman spectroscopy working in a broad range of temperatures, that is, up to the melting point of silicon (1690 K) with submicrometer spatial resolution. Our CMOS-compatible heater-thermometer nanoplatform paves the way to novel nonplasmonic photothermal applications, extending the temperature range and simplifying the thermoimaging procedure.

Prediction of Metal-Organic Frameworks with Phase Transition via Machine Learning.

Metal-organic frameworks (MOFs) possess a virtually unlimited number of potential structures. Although the latter enables an efficient route to control the structure-related functional properties of MOFs, it still complicates the prediction and searching for an optimal structure for specific application. Next to prediction of the MOFs for gas sorption/separation and catalysis via machine learning (ML), we report on ML to find MOFs demonstrating a phase transition (PT). On the basis of an available QMOF database (7463 frameworks), we create and train the autoencoder followed by training the classifier of MOFs from a unique database with experimentally confirmed PT. This makes it possible to identify MOFs with a high potential for PT and evaluate the most likely stimulus for it (guest molecules or temperature/pressure). The formed list of available MOFs for PT allows us to discuss their structural features and opens an opportunity to search for phase change MOFs for diverse physical/chemical application.

Control Morphology and Biological Properties of HKUST-1 MOFs Using an Ultrasound-Assisted Approach.

The synthesis of bioinspired metal-organic frameworks (MOFs) performed in mild conditions with a high quality is greatly demanded. Moreover, the influence of the morphology and structure of bio-MOFs on the cell interaction and toxicity is important to determine. In this work, we developed an ultrasound (US)-assisted synthesis of HKUST-1 MOFs under mild conditions and investigated the influence of the parameters of synthesis on the morphology, structure, and biological properties of the developed MOFs. It was found that the US power, reaction time, temperature, and type of solvent composition would affect the morphology, size, and yield of the obtained crystals. Employing the optimal synthetic conditions, five types of HKUST-1 MOFs were prepared, achieving highest yields (67.8-96.2%) and different morphologies (octahedral, dodecahedral, icosahedral). The relationship between the morphological features and biological properties of developed bio-MOFs was evaluated and discussed. The cellular association and cytotoxicity of MOF@US and MOF@US-PARG were studied on various cell cultures, i.e. normal mouse embryonic fibroblasts (MEF NF2), chronic myeloid leukemia (K562), and mouse melanoma (B16-F10). The experimental results showed that MOF@US-PARG has a higher percentage of association compared to MOF@US. It has also been shown that the cytotoxicity depends on the concentration and surface modification of the developed MOFs.

Application of DUT-4 MOF structure switching for optical and electrical humidity sensing.

The threshold structural transformation of the DUT-4 metal-organic framework (MOF) from an ordered to distorted phase during exposure to ambient conditions has been revealed. The in situ X-ray diffraction analysis, in situ Raman and FTIR spectroscopy, scanning electron microscopy and synchronous thermal analysis have been used for investigation. The reversible effect of exposure time and humidity on such a phase transition has been confirmed. We also demonstrated that the observed phase transition correlated well with changes in the optical and electronic properties of DUT-4, paving the way to a new family of MOF-based phase change materials for optoelectronic applications.

FeAu mixing for high-temperature control of light scattering at the nanometer scale.

Control of the optical properties of a nanoparticle (NP) through its structural changes underlies optical data processing, dynamic coloring, and smart sensing at the nanometer scale. Here, we report on the concept of controlling the light scattering by a NP through mixing of weakly miscible chemical elements (Fe and Au), supporting a thermal-induced phase transformation. The transformation corresponds to the transition from a homogeneous metastable solid solution phase of the (Fe,Au) NP towards an equilibrium biphasic Janus-type NP. We demonstrate that the phase transformation is thermally activated by laser heating up to a threshold of 800 °C (for NPs with a size of hundreds of nm), leading to the associated changes in the light scattering and color of the NP. The results thereby pave the way for the implementation of optical sensors triggered by a high temperature at the nanometer scale via NPs based on metal alloys.

3D Optical Reconstruction of the Nervous System of the Whole-Body Marine Invertebrates.

Optical clearing of invertebrates, the number of species of which is 20 times greater than that of vertebrates, is of fundamental and applied interest for neuroscience in general. Herein, the optical clearing of invertebrates to identify their morphology and neurostructure remains unrealized as of yet. Here, we report on fast (from a few seconds to minutes) and uniform whole-body optical clearing of invertebrates (bivalves, nemertines, annelids, and anomura) of any age and thickness (up to 2 cm) possessing complicated structures and integuments. We developed the protocol unifying dimethyl sulfoxide (DMSO)-based immunostaining of the animals followed by their optical clearing with benzyl alcohol/benzyl benzoate (BABB). Confocal microspectroscopy revealed that the protocol provides an increase of the fluorescence signal by 2 orders of magnitude and decrease of the light scattering by 2 orders of magnitude, thereby accelerating the confocal bioimaging of the whole body. Moreover, by tracking the optical clearing over time with 0.3 s resolution, we revealed that the clearing process is described by the Gompertz growth function, allowing us to determine the physical mechanism of the clearing and its optical parameters. Thereby, we were able to identify in detail and to describe previously unknown neurostructures of different invertebrate animals, paving the way to discovery in neuroscience.

Metal-mediated tunability of MOF-based optical modulators.

We report on the design of 1D MOFs based on a nopinane-annelated organic ligand and Co(II) or Ni(II), the variation of which allows tuning the optical modulation bandwidth. Structural and time-resolved analysis revealed the optical modulation mechanism, the rates and its endurance, thereby enriching the list of sustainable MOFs for tunable optical modulators.

Exfoliation of 2D Metal-Organic Frameworks: toward Advanced Scalable Materials for Optical Sensing.

Two-dimensional metal-organic frameworks (MOFs) occupy a special place among the large family of functional 2D materials. Even at a monolayer level, 2D MOFs exhibit unique sensing, separation, catalytic, electronic, and conductive properties due to the combination of porosity and organo-inorganic nature. However, lab-to-fab transfer for 2D MOF layers faces the challenge of their scalability, limited by weak interactions between the organic and inorganic building blocks. Here, comparing three top-down approaches to fabricate 2D MOF layers (sonication, freeze-thaw, and mechanical exfoliation), The technological criteria have established for creation of the layers of the thickness up to 1 nm with a record aspect ratio up to 2*10^4:1. The freezing-thaw and mechanical exfoliation are the most optimal approaches; wherein the rate and manufacturability of the mechanical exfoliation rivaling the greatest scalability of 2D MOF layers obtained by freezing-thaw (21300:1 vs 1330:1 aspect ratio), leaving the sonication approach behind (with a record 900:1 aspect ratio) have discovered. The high quality 2D MOF layers with a record aspect ratio demonstrate unique optical sensitivity to solvents of a varied polarity, which opens the way to fabricate scalable and freestanding 2D MOF-based atomically thin chemo-optical sensors by industry-oriented approach.

Laser-Assisted Design of MOF-Derivative Platforms from Nano- to Centimeter Scales for Photonic and Catalytic Applications.

Laser conversion of metal-organic frameworks (MOFs) has recently emerged as a fast and low-energy consumptive approach to create scalable MOF derivatives for catalysis, energy, and optics. However, due to the virtually unlimited MOF structures and tunable laser parameters, the results of their interaction are unpredictable and poorly controlled. Here, we experimentally base a general approach to create nano- to centimeter-scale MOF derivatives with the desired nonlinear optical and catalytic properties. Five three- and two-dimensional MOFs, differing in chemical composition, topology, and thermal resistance, have been selected as precursors. Tuning the laser parameters (i.e., pulse duration from fs to ns and repetition rate from kHz to MHz), we switch between ultrafast nonthermal destruction and thermal decomposition of MOFs. We have established that regardless of the chemical composition and MOF topology, the tuning of the laser parameters allows obtaining a series of structurally different derivatives, and the transition from femtosecond to nanosecond laser regimes ensures the scaling of the derivatives from nano- to centimeter scales. Herein, the thermal resistance of MOFs affects the structure and chemical composition of the resulting derivatives. Finally, we outline the "laser parameters versus MOF structure" space, in which one can create the desired and scalable platforms with nonlinear optical properties from photoluminescence to light control and enhanced catalytic activity.

Light-Induced Color Switching of Single Metal-Organic Framework Nanocrystals.

Photoinduced modulation of the optical parameters of nanomaterials underlies the operating principles of all-optical nanodevices. Here, we demonstrate the laser-induced 10% modulation of the refractive index and 16-fold modulation of the extinction coefficient of the dynamic metal-organic framework (HKUST-1) nanocrystals within the whole visible range. Using the laser-induced water sorption/desorption process inside HKUST-1, we have achieved size-dependent reversible tuning of brightness and color of its nanocrystals over the different spatial directions and color palette. The numerical analysis also confirmed the detected optical tuning through the evolution of optical spectra and directivity of the scattered light. The results of the work demonstrate the promising nature of the dynamic metal-organic frameworks for nonlinear optics and expand the library of chemically synthesized hybrid materials with light-controlled optical properties.

Single Particle Color Switching by Laser-Induced Deformation of Liquid Metal-derived Microcapsules.

Active controlling of optical properties of metallic particles holds great promise for nonlinear nanophotonics and compact optoelectronic devices. Except for the electronic and chemical tuning of their properties, active control through fast and reversible shape modulation remains a significant challenge. Here, we report on the concept for changing the color and brightness of single particles by reversible/irreversible tuning of their shapes. As a family of plasmonic materials with low melting points and high flexibility, we synthesized liquid metal microparticles with different interior (dense/hollow) and morphology from Ga and its alloys (GaNi, GaCu). Utilizing near-infrared femtosecond laser pulses, we achieve two regimes for reversible/irreversible optical tuning due to consequent weak/strong perturbation of the microcapsules (MC) shapes. The chemical composition and MCs morphology significantly affect the tuning of color and brightness, as well as the rigidity of the MCs to extreme laser conditions.

Polymer Matrix Incorporated with ZIF-8 for Application in Nonlinear Optics.

Polymers with embedded metal-organic frameworks (MOFs) have been of interest in research for advanced applications in gas separation, catalysis and sensing due to their high porosity and chemical selectivity. In this study, we utilize specific MOFs with high thermal stability and non-centrosymmetric crystal structures (zeolitic imidazolate framework, ZIF-8) in order to give an example of MOF-polymer composite applications in nonlinear optics. The synthesized MOF-based polymethyl methacrylate (PMMA) composite (ZIF-8-PMMA) demonstrates the possibility of the visualization of near-infrared laser beams in the research lab. The resulting ZIF-8-PMMA composite is exposed to a laser under extreme conditions and exhibits enhanced operating limits, much higher than that of the widely used inorganic materials in optics. Overall, our findings support the utilization of MOFs for synthesis of functional composites for optical application.

Optical interference-based sensors for the visual detection of nano-scale objects.

In this study, we present a new concept for the simple visual detection of nano-scale objects in solutions. To achieve this goal, we developed chromogen-free interference-based sensors that provided a color visible reaction directly after the interaction of the analyte with the substrate. The effect is based on the strong optical interference occurring at the interface between the inkjet printed sol-gel titania film (a layer with high refractive index) and the adsorbed nano-sized objects (layer with low refractive index), which can be detected even with the naked eye. Herein, we have developed a synthetic strategy for the inkjet printing of interference sensors with controllable color change through thickness adjustment.

Metal-Organic Frameworks in Modern Physics: Highlights and Perspectives.

Owing to the synergistic combination of a hybrid organic-inorganic nature and a chemically active porous structure, metal-organic frameworks have emerged as a new class of crystalline materials. The current trend in the chemical industry is to utilize such crystals as flexible hosting elements for applications as diverse as gas and energy storage, filtration, catalysis, and sensing. From the physical point of view, metal-organic frameworks are considered molecular crystals with hierarchical structures providing the structure-related physical properties crucial for future applications of energy transfer, data processing and storage, high-energy physics, and light manipulation. Here, the perspectives of metal-organic frameworks as a new family of functional materials in modern physics are discussed: from porous metals and superconductors, topological insulators, and classical and quantum memory elements, to optical superstructures, materials for particle physics, and even molecular scale mechanical metamaterials. Based on complementary properties of crystallinity, softness, organic-inorganic nature, and complex hierarchy, a description of how such artificial materials have extended their impact on applied physics to become the mainstream in material science is offered.