Genome editing with CRISPR/Cas9 in Pinus radiata (D. Don).

BACKGROUND: To meet increasing demand for forest-based products and protect natural forests from further deforestation requires increased productivity from planted forests. Genetic improvement of conifers by traditional breeding is time consuming due to the long juvenile phase and genome complexity. Genetic modification (GM) offers the opportunity to make transformational changes in shorter time frames but is challenged by current genetically modified organism (GMO) regulations. Genome editing, which can be used to generate site-specific mutations, offers the opportunity to rapidly implement targeted improvements and is globally regulated in a less restrictive way than GM technologies. RESULTS: We have demonstrated CRISPR/Cas9 genome editing in P. radiata targeting a single-copy cell wall gene GUX1 in somatic embryogenic tissue and produced plantlets from the edited tissue. We generated biallelic INDELs with an efficiency of 15 % using a single gRNA. 12 % of the transgenic embryogenic tissue was edited when two gRNAs were used and deletions of up to 1.3 kb were identified. However, the regenerated plants did not contain large deletions but had single nucleotide insertions at one of the target sites. We assessed the use of CRISPR/Cas9 ribonucleoproteins (RNPs) for their ability to accomplish DNA-free genome editing in P. radiata. We chose a hybrid approach, with RNPs co-delivered with a plasmid-based selectable marker. A two-gRNA strategy was used which produced an editing efficiency of 33 %, and generated INDELs, including large deletions. Using the RNP approach, deletions found in embryogenic tissue were also present in the plantlets. But, all plants produced using the RNP strategy were monoallelic. CONCLUSIONS: We have demonstrated the generation of biallelic and monoallelic INDELs in the coniferous tree P. radiata with the CRISPR/Cas9 system using plasmid expressed Cas9 gRNA and RNPs respectively. This opens the opportunity to apply genome editing in conifers to rapidly modify key traits of interest.

Syringyl lignin production in conifers: Proof of concept in a Pine tracheary element system.

Conifers (softwoods) naturally lack syringyl units in their lignins, rendering lignocellulosic materials from such species more difficult to process than syringyl-rich hardwood species. Using a transformable Pinus radiata tracheary element (TE) system as an experimental platform, we investigated whether metabolic engineering can be used to create syringyl lignin in conifers. Pyrolysis-GC/MS and 2D-NMR analysis of P. radiata TE cultures transformed to express ferulate 5-hydroxylase (F5H) and caffeic acid O-methyltransferase (COMT) from Liquidambar styraciflua confirmed the production and incorporation of sinapyl alcohol into the lignin polymer. Transformation with F5H was sufficient for the production of syringyl lignin in TEs, but cotransformation with COMT improved its formation. In addition, lower levels of the pathway intermediate 5-hydroxyconiferyl alcohol were evidenced in cotransformation experiments, indicating that the introduction of the COMT overcame the inefficiency of the native pine methyltransferases for supporting sinapyl alcohol production.Our results provide the proof of concept that it is possible to generate a lignin polymer that contains syringyl units in softwood species such as P. radiata, suggesting that it might be possible to retain the outstanding fiber properties of softwoods while imbuing them with the lignin characteristics of hardwoods that are more favorable for industrial processing.

Bioinformatic and phylogenetic analysis of the CLAVATA3/EMBRYO-SURROUNDING REGION (CLE) and the CLE-LIKE signal peptide genes in the Pinophyta.

BACKGROUND: There is a rapidly growing awareness that plant peptide signalling molecules are numerous and varied and they are known to play fundamental roles in angiosperm plant growth and development. Two closely related peptide signalling molecule families are the CLAVATA3-EMBRYO-SURROUNDING REGION (CLE) and CLE-LIKE (CLEL) genes, which encode precursors of secreted peptide ligands that have roles in meristem maintenance and root gravitropism. Progress in peptide signalling molecule research in gymnosperms has lagged behind that of angiosperms. We therefore sought to identify CLE and CLEL genes in gymnosperms and conduct a comparative analysis of these gene families with angiosperms. RESULTS: We undertook a meta-analysis of the GenBank/EMBL/DDBJ gymnosperm EST database and the Picea abies and P. glauca genomes and identified 93 putative CLE genes and 11 CLEL genes among eight Pinophyta species, in the genera Cryptomeria, Pinus and Picea. The predicted conifer CLE and CLEL protein sequences had close phylogenetic relationships with their homologues in Arabidopsis. Notably, perfect conservation of the active CLE dodecapeptide in presumed orthologues of the Arabidopsis CLE41/44-TRACHEARY ELEMENT DIFFERENTIATION (TDIF) protein, an inhibitor of tracheary element (xylem) differentiation, was seen in all eight conifer species. We cloned the Pinus radiata CLE41/44-TDIF orthologues. These genes were preferentially expressed in phloem in planta as expected, but unexpectedly, also in differentiating tracheary element (TE) cultures. Surprisingly, transcript abundances of these TE differentiation-inhibitors sharply increased during early TE differentiation, suggesting that some cells differentiate into phloem cells in addition to TEs in these cultures. Applied CLE13 and CLE41/44 peptides inhibited root elongation in Pinus radiata seedlings. We show evidence that two CLEL genes are alternatively spliced via 3'-terminal acceptor exons encoding separate CLEL peptides. CONCLUSIONS: The CLE and CLEL genes are found in conifers and they exhibit at least as much sequence diversity in these species as they do in other plant species. Only one CLE peptide sequence has been 100% conserved between gymnosperms and angiosperms over 300 million years of evolutionary history, the CLE41/44-TDIF peptide and its likely conifer orthologues. The preferential expression of these vascular development-regulating genes in phloem in conifers, as they are in dicot species, suggests close parallels in the regulation of secondary growth and wood formation in gymnosperm and dicot plants. Based on our bioinformatic analysis, we predict a novel mechanism of regulation of the expression of several conifer CLEL peptides, via alternative splicing resulting in the selection of alternative C-terminal exons encoding separate CLEL peptides.

Suppression of CCR impacts metabolite profile and cell wall composition in Pinus radiata tracheary elements.

Suppression of the lignin-related gene cinnamoyl-CoA reductase (CCR) in the Pinus radiata tracheary element (TE) system impacted both the metabolite profile and the cell wall matrix in CCR-RNAi lines. UPLC-MS/MS-based metabolite profiling identified elevated levels of p-coumaroyl hexose, caffeic acid hexoside and ferulic acid hexoside in CCR-RNAi lines, indicating a redirection of metabolite flow within phenylpropanoid metabolism. Dilignols derived from coniferyl alcohol such as G(8-5)G, G(8-O-4)G and isodihydrodehydrodiconiferyl alcohol (IDDDC) were substantially depleted, providing evidence for CCR's involvement in coniferyl alcohol biosynthesis. Severe CCR suppression almost halved lignin content in TEs based on a depletion of both H-type and G-type lignin, providing evidence for CCR's involvement in the biosynthesis of both lignin types. 2D-NMR studies revealed minor changes in the H:G-ratio and consequently a largely unchanged interunit linkage distribution in the lignin polymer. However, unusual cell wall components including ferulate and unsaturated fatty acids were identified in TEs by thioacidolysis, pyrolysis-GC/MS and/or 2D-NMR in CCR-RNAi lines, providing new insights into the consequences of CCR suppression in pine. Interestingly, CCR suppression substantially promoted pyrolytic breakdown of cell wall polysaccharides, a phenotype most likely caused by the incorporation of acidic compounds into the cell wall matrix in CCR-RNAi lines.

CCoAOMT suppression modifies lignin composition in Pinus radiata.

A cDNA clone encoding the lignin-related enzyme caffeoyl CoA 3-O-methyltransferase (CCoAOMT) was isolated from a Pinus radiata cDNA library derived from differentiating xylem. Suppression of PrCCoAOMT expression in P. radiata tracheary element cultures affected lignin content and composition, resulting in a lignin polymer containing p-hydroxyphenyl (H), catechyl (C) and guaiacyl (G) units. Acetyl bromide-soluble lignin assays revealed reductions in lignin content of up to 20% in PrCCoAOMT-deficient transgenic lines. Pyrolysis-GC/MS and 2D-NMR studies demonstrated that these reductions were due to depletion of G-type lignin. Correspondingly, the proportion of H-type lignin in PrCCoAOMT-deficient transgenic lines increased, resulting in up to a 10-fold increase in the H/G ratio relative to untransformed controls. 2D-NMR spectra revealed that PrCCoAOMT suppression resulted in formation of benzodioxanes in the lignin polymer. This suggested that phenylpropanoids with an ortho-diphenyl structure such as caffeyl alcohol are involved in lignin polymerization. To test this hypothesis, synthetic lignins containing methyl caffeate or caffeyl alcohol were generated and analyzed by 2D-NMR. Comparison of the 2D-NMR spectra from PrCCoAOMT-RNAi lines and synthetic lignins identified caffeyl alcohol as the new lignin constituent in PrCCoAOMT-deficient lines. The incorporation of caffeyl alcohol into lignin created a polymer containing catechyl units, a lignin type that has not been previously identified in recombinant lignin studies. This finding is consistent with the theory that lignin polymerization is based on a radical coupling process that is determined solely by chemical processes.

Proteomic analysis of membrane preparations from developing Pinus radiata compression wood.

For coniferous gymnosperms, few data exist as to the contribution of the membrane-associated proteome to cell wall and wood formation. In this study, we begin to address this knowledge deficiency by examining the proteomic profile of Golgi-enriched membrane preparations derived from developing Pinus radiata compression wood. These membrane preparations were generated by a combination of discontinuous sucrose gradient centrifugation and Triton X-114-based phase separation. Fractionation by phase separation removed contaminating proteins associated with the cytoskeleton and enabled the discrimination between soluble and membrane-bound/integral proteins. The proteomic analysis of the resulting aqueous and detergent phases using high-performance liquid chromatography-tandem mass spectrometry resulted in the identification of 175 proteins. The majority of the identified proteins were membrane bound/integral and originated from cellular components such as the nucleus, plastids, endoplasmic reticulum, plasma membrane and Golgi vesicles. On the basis of bioinformatic analysis, many of the identified proteins were predicted to be involved either in the regulation of wood formation or in cell wall biosynthesis, which indicated that the proteomic analysis of non-cytosolic proteins in developing xylem is a useful strategy to investigate the molecular aspects of wood formation in pine.

Gene silencing of cinnamyl alcohol dehydrogenase in Pinus radiata callus cultures.

Xylem-derived Pinus radiata cell cultures, which can be induced to differentiate tracheary elements (TEs), were transformed with an RNAi construct designed to silence cinnamyl alcohol dehydrogenase (CAD), an enzyme involved in the biosynthesis of monolignols. Quantitative enzymatic CAD measurements revealed reduced CAD activity levels in most transclones generated. TEs from transclones with approximately 20% residual CAD activity did not release elevated levels of vanillin, which was derived from coniferyl-aldehyde through a mild alkali treatment. However, the activation of the phenylpropanoid pathway in transclones with approximately 20% residual CAD activity through the application of non-physiological concentrations of sucrose and l-phenylalanine produced phenotypic changes. The accumulation of metabolites such as dihydroconiferyl-alcohol (DHCA), which also accumulates in the P. taeda CAD mutant cad-n1, was observed. These results indicate that a substantial reduction in CAD activity is necessary for this enzyme to become a rate-limiting step in lignin biosynthesis in conifers such as P. radiata and confirm that transformable P. radiata callus cultures can be useful to investigate the function of xylogenesis-related genes in conifers.

Exploring the ultrastructural localization and biosynthesis of beta(1,4)-galactan in Pinus radiata compression wood.

Softwood species such as pines react to gravitropic stimuli by producing compression wood, which unlike normal wood contains significant amounts of beta(1,4)-galactan. Currently, little is known regarding the biosynthesis or physiological function of this polymer or the regulation of its deposition. The subcellular location of beta(1,4)-galactan in developing tracheids was investigated in Pinus radiata D. Don using anti-beta(1,4)-galactan antibodies to gain insight into its possible physiological role in compression wood. beta(1,4)-Galactan was prominent and evenly distributed throughout the S2 layer of developing tracheid cell walls in P. radiata compression wood. In contrast, beta(1,4)-galactan was not detected in normal wood. Greatly reduced antibody labeling was observed in fully lignified compression wood tracheids, implying that lignification results in masking of the epitope. To begin to understand the biosynthesis of galactan and its regulation, an assay was developed to monitor the enzyme that elongates the beta(1,4)-galactan backbone in pine. A beta(1,4)-galactosyltransferase (GalT) activity capable of extending 2-aminopyridine-labeled galacto-oligosaccharides was found to be associated with microsomes. Digestion of the enzymatic products using a beta(1,4)-specific endogalactanase confirmed the production of beta(1,4)-galactan by this enzyme. This GalT activity was substantially higher in compression wood relative to normal wood. Characterization of the identified pine GalT enzyme activity revealed pH and temperature optima of 7.0 and 20 degrees C, respectively. The beta(1,4)-galactan produced by the pine GalT had a higher degree of polymerization than most pectic galactans found in angiosperms. This observation is consistent with the high degree of polymerization of the naturally occurring beta(1,4)-galactan in pine.

Suppression of 4-coumarate-CoA ligase in the coniferous gymnosperm Pinus radiata.

Severe suppression of 4-coumarate-coenzyme A ligase (4CL) in the coniferous gymnosperm Pinus radiata substantially affected plant phenotype and resulted in dwarfed plants with a "bonsai tree-like" appearance. Microscopic analyses of stem sections from 2-year-old plants revealed substantial morphological changes in both wood and bark tissues. This included the formation of weakly lignified tracheids that displayed signs of collapse and the development of circumferential bands of axial parenchyma. Acetyl bromide-soluble lignin assays and proton nuclear magnetic resonance studies revealed lignin reductions of 36% to 50% in the most severely affected transgenic plants. Two-dimensional nuclear magnetic resonance and pyrolysis-gas chromatography-mass spectrometry studies indicated that lignin reductions were mainly due to depletion of guaiacyl but not p-hydroxyphenyl lignin. 4CL silencing also caused modifications in the lignin interunit linkage distribution, including elevated beta-aryl ether (beta-O-4 unit) and spirodienone (beta-1) levels, accompanied by lower phenylcoumaran (beta-5), resinol (beta-beta), and dibenzodioxocin (5-5/beta-O-4) levels. A sharp depletion in the level of saturated (dihydroconiferyl alcohol) end groups was also observed. Severe suppression of 4CL also affected carbohydrate metabolism. Most obvious was an up to approximately 2-fold increase in galactose content in wood from transgenic plants due to increased compression wood formation. The molecular, anatomical, and analytical data verified that the isolated 4CL clone is associated with lignin biosynthesis and illustrated that 4CL silencing leads to complex, often surprising, physiological and morphological changes in P. radiata.

Exploring lignification in conifers by silencing hydroxycinnamoyl-CoA:shikimate hydroxycinnamoyltransferase in Pinus radiata.

The enzyme hydroxycinnamoyl-CoA:shikimate hydroxycinnamoyltransferase (HCT) is involved in the production of methoxylated monolignols that are precursors to guaiacyl and syringyl lignin in angiosperm species. We identified and cloned a putative HCT gene from Pinus radiata, a coniferous gymnosperm that does not produce syringyl lignin. This gene was up-regulated during tracheary element (TE) formation in P. radiata cell cultures and showed 72.6% identity to the amino acid sequence of the Nicotiana tabacum HCT isolated earlier. RNAi-mediated silencing of the putative HCT gene had a strong impact on lignin content, monolignol composition, and interunit linkage distribution. AcBr assays revealed an up to 42% reduction in lignin content in TEs. Pyrolysis-GC/MS, thioacidolysis, and NMR detected substantial changes in lignin composition. Most notable was the rise of p-hydroxyphenyl units released by thioacidolysis, which increased from trace amounts in WT controls to up to 31% in transgenics. Two-dimensional 13C-1H correlative NMR confirmed the increase in p-hydroxyphenyl units in the transgenics and revealed structural differences, including an increase in resinols, a reduction in dibenzodioxocins, and the presence of glycerol end groups. The observed modifications in silenced transgenics validate the targeted gene as being associated with lignin biosynthesis in P. radiata and thus likely to encode HCT. This enzyme therefore represents the metabolic entry point leading to the biosynthesis of methoxylated phenylpropanoids in angiosperm species and coniferous gymnosperms such as P. radiata.

Gene silencing studies in the gymnosperm species Pinus radiata.

A biolistic transformation procedure was used to transform embryogenic Pinus radiata tissue with constructs containing the Zea mays UBI1 (ubiquitin)-promoter followed by the P. radiata CAD (cinnamyl alcohol dehydrogenase) cDNA in sense or anti-sense orientation or in the form of an inverted-repeat. The effect of the different constructs on silencing the endogenous CAD gene was monitored in embryogenic tissue and somatic seedlings of 28 P. radiata transclones. Quantitative CAD measurements demonstrated that the construct containing an inverted-repeat of the CAD cDNA was most efficient in triggering gene silencing in P. radiata. Northern hybridization experiments with silenced transclones revealed that reduced CAD activities were the result of reduced steady state levels of the targeted CAD mRNA. Monitoring of the activity of the UBI1-promoter in the P. radiata transclones and heat-shock experiments with transgenic somatic P. radiata seedlings indicated that gene silencing is positively correlated with the expression level of the transgene. The obtained data are also consistent with a role for the expression level of the endogenous CAD gene in gene silencing.