Improving dose delivery accuracy with EPID in vivo dosimetry: results from a multicenter study.

PURPOSE: To investigate critical aspects and effectiveness of in vivo dosimetry (IVD) tests obtained by an electronic portal imaging device (EPID) in a multicenter and multisystem context. MATERIALS AND METHODS: Eight centers with three commercial systems-SoftDiso (SD, Best Medical Italy, Chianciano, Italy), Dosimetry Check (DC, Math Resolution, LCC), and PerFRACTION (PF, Sun Nuclear Corporation, SNC, Melbourne, FL)-collected IVD results for a total of 2002 patients and 32,276 tests. Data are summarized for IVD software, radiotherapy technique, and anatomical site. Every center reported the number of patients and tests analyzed, and the percentage of tests outside of the tolerance level (OTL%). OTL% was categorized as being due to incorrect patient setup, incorrect use of immobilization devices, incorrect dose computation, anatomical variations, and unknown causes. RESULTS: The three systems use different approaches and customized alert indices, based on local protocols. For Volumetric Modulated Arc Therapy (VMAT) treatments OTL% mean values were up to 8.9% for SD, 18.0% for DC, and 16.0% for PF. Errors due to "anatomical variations" for head and neck were up to 9.0% for SD and DC and 8.0% for PF systems, while for abdomen and pelvis/prostate treatments were up to 9%, 17.0%, and 9.0% for SD, DC, and PF, respectively. The comparison among techniques gave 3% for Stereotactic Body Radiation Therapy, 7.0% (range 4.7-8.9%) for VMAT, 10.4% (range 7.0-12.2%) for Intensity Modulated Radiation Therapy, and 13.2% (range 8.8-21.0%) for 3D Conformal Radiation Therapy. CONCLUSION: The results obtained with different IVD software and among centers were consistent and showed an acceptable homogeneity. EPID IVD was effective in intercepting important errors.

Visceral and subcutaneous adipose tissue as markers of local and systemic inflammation: a comparison between celiac and obese patients using MRI.

BACKGROUND: Celiac disease (CD) is a systemic inflammatory disease, which primarily affects the gastrointestinal tract. It has been recently demonstrated that adipose-tissue infiltration by proinflammatory immune cells causes a chronic low-grade inflammation in obese patients. Magnetic resonance imaging (MRI) has already proved to be useful in evaluation of inflammatory states. The aim of the present study was to determine whether alterations of visceral and subcutaneous adipose tissue, identified with MRI, could serve as markers of local and systemic inflammation in patients with CD. METHODS: A pilot study was conducted comparing alterations in visceral adipose tissue (VAT) and subcutaneous adipose tissue (SAT) in CD patients vs obese patients and healthy controls. Fifty patients were enrolled and assigned to one of the following groups: Group A: 11 active CD patients; Group B: 11 CD patients in remission; Group C: 16 obese patients; Group D: 12 healthy controls. A 3-T MRI unit was used and T2-weighted TSE images of VAT and SAT were obtained in specific regions of interest. Serum cytokine concentrations (TNF-α, IL-6, adiponectin, leptin, IL-2, IFN-γ) were determined. RESULTS: There was a significant difference in VAT T2 relaxation time between Group A and B (p < 0.001), A and D (p < 0.01), B and C (p < 0.001). There was a statistically significant difference in SAT T2 relaxation time between Group A and B (p < 0.001), A and C (p < 0.05), A and D (p < 0.001), B and C (p < 0.01). In addition, VAT/SAT T2 relaxation time ratio showed a statistically significant difference between Group A and C (p < 0.05) and between Group B and C (p < 0.01). Only TNF-α and IL-6 significantly correlated with both VAT and VAT/SAT ratio in active CD. CONCLUSIONS: MRI showed similar increased visceral inflammatory signals in patients with active CD and obese patients. However, subcutaneous inflammatory signals were higher in active CD than in all the other groups. These data show that there is a systemic inflammatory state in active CD, whereas chronic inflammation appears confined to VAT in obesity. These data were only partially confirmed by serological cytokine profiles, which showed less specificity than MRI.

Frozen section accurately allows pathological characterization of endometrial cancer in patients with a preoperative ambiguous or inconclusive diagnoses: our experience.

BACKGROUND: The aim of this study was to assess the agreement rate between intraoperative evaluation (IOE) and final diagnosis (FD) in a series of surgically resected endometrial carcinoma (EC), with a preoperative ambiguous or inconclusive diagnosis by endometrial biopsies and imaging. METHODS: A retrospective study was performed selecting patients who underwent surgery with IOE for suspected EC at our institution from 2012 to 2018. A K coefficient was determined with respect to the histotype, tumor grade, myometrial infiltration and cervical involvement. RESULTS: Data analysis has been performed on 202 women. The IOE evaluation was distributed as Endometrioid (n = 180) and Non-Endometrioid (n = 22). The comparison between the frozen section (FS) and the definitive histological subtype showed an overall agreement rate of 93,07% (k = 0.612) and an agreement of 97.2% for Endometrioid vs 59% for Non-Endometrioid tumors. The FIGO system grading was the same in 91,1% of patients, none was upgraded and in 8,9% downgraded. Observed agreements were 89,11% and 95,54% for myometrial and cervical involvement, respectively. CONCLUSIONS: The good agreement between intraoperative grading, myometrial invasion and their histological definition on permanent sections highlights that FS is a good predictor for surgical outcome, in particular in presence of a preoperative ambiguous or inconclusive diagnostic evaluation.

Linking dendroecology and association genetics in natural populations: Stress responses archived in tree rings associate with SNP genotypes in silver fir (Abies alba Mill.).

Genetic association studies in forest trees would greatly benefit from information on the response of trees to environmental stressors over time, which can be provided by dendroecological analysis. Here, we jointly analysed dendroecological and genetic data of surviving silver fir trees to explore the genetic basis of their response to the iconic stress episode of the 1970s and 1980s that led to large-scale forest dieback in Central Europe and has been attributed to air pollution. Specifically, we derived dendrophenotypic measures from 190 trees in the Bavarian Forest that characterize the resistance, resilience and recovery during this growth depression, and in the drought year in 1976. By focusing on relative growth changes of trees and by standardizing the dendrophenotypes within stands, we accounted for variation introduced by micro- and macroscale environmental differences. We associated the dendrophenotypes with single nucleotide polymorphisms (SNPs) in candidate genes using general linear models (GLMs) and the machine learning algorithm random forest with subsequent feature selection. Most trees at our study sites experienced a severe growth decline from 1974 until the mid-1980s with minimum values during the drought year. Fifteen genes were associated with the dendrophenotypes, including genes linked to photosynthesis and drought stress. With our study, we show that dendrophenotypes can be a powerful resource for genetic association studies that permit to account for micro- and macroenvironmental variation when data are derived from natural populations. We call for a wider collaboration of dendroecologists and forest geneticists to integrate individual tree-level dendrophenotypes in genetic association studies.

Real-time dose reconstruction for wedged photon beams: a generalized procedure.

A practical and accurate generalized procedure to reconstruct the isocenter dose D(iso) for 3D conformal radiotherapy (3DCRT) has been developed for X-ray open beams supplied by linacs of different manufacturers and equipped with aSi electronic portal imaging devices (aSi EPIDs). This paper reports an extension of the method, to be applied at the wedged X-ray beams characterized by the wedge attenuation factor W(AF). Using water-equivalent solid phantoms (SPs) of different thicknesses, w, and photon square fields of sizes, L, the generalized midplane doses D(0)(W(AF), w/2,L) and generalized transit signals s(t)(0)(W(AF),w,L) by 38 beams of six different linacs were determined. The generalized data were fitted by surface equations and used together with the information of the 'record & verify' network of the centers. In this manner, for every beam, the D(iso) reconstruction was obtained in about 25 seconds after the treatment. To test the in vivo dosimetric procedure, six pelvic treatments that used conformed wedged beams were carried out with three linacs of different manufacturers. For every beam, the comparison between the reconstructed D(iso) and the D(iso,TPS) computed by the TPS, resulted in an acceptable tolerance level of ±5%, estimated for this kind of treatment. Generally the in vivo dosimetry methods that use EPIDs require: (i) a special effort for the dosimetric commissioning with SPs of different thicknesses, and (ii) extra time for the analysis of the EPID signals. The proposed procedure simplifies the commissioning step and supplies for Varian, Elekta, and Siemens linacs equipped with the aSi EPIDs a quasi-real time in vivo dosimetry for open and wedged 3DCRT fields.

A validation study of a dedicated software for an automated in vivo dosimetry control in radiotherapy.

In vivo dosimetry (IVD) is the last step of a radiotherapy quality control program aimed to ensure that the dose delivered is in agreement with that prescribed. IVD procedures based on single detectors are time-consuming and impossible to use for the modern radiotherapy techniques, based on static or kinetic beams (modulated in intensity fluence); this means that more efficient and practical methods are highly recommended. The practical method SOFTDISO, based on the use of electronic portal image device (EPID), provides two tests (i) the R ratio between the reconstructed and the planned isocenter doses to verify an agreement within 5% and (ii) the γ-analysis of the EPID images, to verify γ% ≥ 90% and γmean ≤ 0.4. This paper reports the results of 11,357 IVD tests carried out for 823 patients treated by three-dimensional conformal radiation therapy and volumetric modulated arc therapy techniques. In particular, the dose disagreements are reported distinguishing two kinds of causes, those of (i) class 1 that includes the errors due to inadequate quality controls and (ii) the class 2, due to patient morphological changes. About the tests out of tolerance, 6% were by VMAT and 21% by 3DCRT, but taking into account the only class 1 of errors, i.e., removing the causes of class 2, only 7% of patients examined presented at least one of the three mean indexes out of tolerance. The workload for IVD on 9 patients/day per linac is about 52 min/day but recently, a new automated SOFTDISO version has been implemented to reduce the time to about 34 min/day.

Portal dose measurements by a 2D array.

A 2D array (PTW, type 10024), equipped with 729 vented plane parallel ion-chambers, has been calibrated as a detector for the in vivo comparison between measured and predicted portal doses for head-neck tumors. The comparison of absolute portal doses measured to ones predicted by a commercial treatment planning system within the field of view of the CT scanner, can help the delivered dose verification during different treatment fractions, in particular when the patient's present weight loss. This paper reports the preliminary results of the comparison of the portal doses measured by a PTW 2D array during several radiotherapy fractions and the predicted portal doses for seven patients undergoing head-neck tumor radiotherapy. The gamma index analysis supplied an agreement of more than 95% of the dose-point P(gamma)>95% within acceptance criteria, in terms of dose difference, DeltaD(max), and distance-agreement, Deltad(max), equal to 5% and 4mm, respectively. After the third week, one patient showed a decrease of P(gamma) values due to the markedly reduced patient's thickness. Even if the spatial resolution of the 2D array was 1cm, there were two advantages in the use of this 2D array as a portal dose device for IMRT quality control. The first one was the use of a stable and efficient absolute dosimeter for in vivo verification, although its construction and behavior for other gantry angles need to be tested, and the second one was the time efficiency in verifying the correct dose delivery in several fractions of the therapy. This study presents acceptance criteria for the comparison of TPS-predicted portal dose images with in vivo 2D ion-chamber measurements for IMRT. In particular, portal dose measurements offer clues for additional studies as to which indicators can signal the need for replanning during treatment.

Step-and-Shoot IMRT by Siemens Beams: An EPID Dosimetry Verification During Treatment.

PURPOSE: This work reports the extension of a semiempirical method based on the correlation ratios to convert electronic portal imaging devices transit signals into in vivo doses for the step-and-shoot intensity-modulated radiotherapy Siemens beams. The dose reconstructed at the isocenter point Diso, compared to the planned dose, Diso,TPS, and a γ-analysis between 2-dimensional electronic portal imaging device images obtained day to day, seems to supply a practical method to verify the beam delivery reproducibility. METHOD: The electronic portal imaging device images were obtained by the superposition of many segment fields, and the algorithm for the Diso reconstruction for intensity-modulated radiotherapy step and shoot was formulated using a set of simulated intensity-modulated radiotherapy beams. Moreover, the in vivo dose-dedicated software was integrated with the record and verify system of the centers. RESULTS: Three radiotherapy centers applied the in vivo dose procedure at 30 clinical intensity-modulated radiotherapy treatments, each one obtained with 5 or 7 beams, and planned for patients undergoing radiotherapy for prostatic tumors. Each treatment beam was checked 5 times, obtaining 900 tests of the ratios R = Diso/Diso,TPS. The average R value was equal to 1.002 ± 0.056 (2 standard deviation), while the mean R value for each patient was well within 5%, once the causes of errors were removed. The γ-analysis of the electronic portal imaging device images, with 3% 3 mm acceptance criteria, showed 90% of the tests with Pγ < 1 ≥ 95% and γmean ≤ 0.5. The off-tolerance tests were found due to incorrect setup or presence of morphological changes. This preliminary experience shows the great utility of obtaining the in vivo dose results in quasi real time and close to the linac, where the radiotherapy staff may immediately spot possible causes of errors. The in vivo dose procedure presented here is one of the objectives of a project, for the development of practical in vivo dose procedures, financially supported by the Istituto Nazionale di Fisica Nucleare.

A preliminary dosimetric characterization of chemical vapor deposition diamond detector prototypes in photon and electron radiotherapy beams.

Three radiation detectors based on polycrystalline diamond films with different thickness and resistivity, obtained by microwave chemical vapor deposition, were tested to assess their suitability for relative dosimetry of photon and electron beams supplied by clinical linear accelerators. All samples showed a linear response as a function of the absorbed dose. The sensitivity per unit of detector sensitive volume spanned between 7 and 43 nC Gy(-1) mm(-3) with an applied electric field of 40 kV/cm. The dose rate dependence was evaluated following the Fowler theory and delta coefficient values between 0.95 and 1.00 were found for the three samples when polarized at 40 kV/cm. Percentage depth dose curves, output factors, and normalized dose profiles were determined for 6 and 10 MV photon beams and for 6 and 15 MeV electron beams. The results obtained with the diamond detectors were in good agreement with those obtained by reference detector measurements [all the data were within the experimental uncertainty of 1% (1sigma)].

Polyglycidol-based metal adhesion promoters.

Hydrophilic adhesion promoters that facilitate intimate binding between metals and polymers are an important class of materials with a wide variety of applications in biomedical coatings. Currently, non-poly(meth-)acrylate based hydrophilic polymeric adhesives are unavailable. Here, we report the preparation of such adhesion-promoters based on linear polyglycidol for biomedical applications. The adhesion promoting polymer is prepared from partly phosphonoethylated polyglycidol in three steps. First, the remaining hydroxyl groups of the polyglycidol backbone are reacted with acryloyl chloride; secondly, the phosphonate groups are chemoselectively dealkylated using bromotrimethylsilane. Finally, the bis(trimethylsilyl)phosphonate intermediate is converted to the phosphonic acid through ethanolysis. The reaction conditions of each synthetic step are optimized individually and the products are characterized by 1H, 31P NMR and SEC analysis. The optimized reaction conditions are applied to establish a straightforward one-pot reaction, resulting in an ethanolic formulation of the adhesion promoter, which can be used immediately for the coating application. Special attention is paid to the stability of the intermediates, the chemoselectivity of the reactions and the shelf-life of the product. 1H NMR spectroscopy reveals hydrolytic instability of the product under ambient conditions; however, the polymers are sufficiently stable in dry ethanol for at least 14 days. The combination of this hydrophilic polymer with acrylate and phosphonic acid groups constitutes a versatile platform technology for the preparation of thin primer coatings on metal substrates for biomedical applications. The phosphonic acid residues assure strong binding to stainless steel wires and the acrylates can be addressed by UV light to enable crosslinking, thus improving mechanical stability and adhesion between the substrate and a biomedical hydrogel coating. The quality of the adhesion promotion to stainless steel wires is verified by using a lubricious, hydrogel top coat and by evaluating friction and wear resistance of this total coating system. Constant values for friction and wear are obtained, proving the applicability of phosphonic acid-functionalized polyglycidols as metal adhesion promoters for biomedical applications.

Dose measurements and calculations of small radiation fields for 9-MV x rays.

Measurements of dose distribution for square fields with sizes ranging from 1 X 1 to 30 X 30 cm for a 9-MV x-ray beam from a Neptune 10 linear accelerator, manufactured by CGR, are reported. Special attention was paid to field sizes smaller than 4 X 4 cm, used in radiosurgery techniques. To express the dose-monitor units relationship, total, collimator, and phantom scatter correction factors were obtained by experimental measurements. A strong dependence of these factors on the smallest field sizes (less than 4 X 4 cm) was shown. Measurements of the maximum depth dose dmax, plotted as a function of field size, showed a maximum at about 5 X 5 cm, in good agreement with previous results. dmax was also measured for the smallest fields, demonstrating that the contaminating electron component of the x-ray beam was not responsible for the dmax shift. Analysis of the penumbra width of cross dose distributions, as a function of field sizes, allowed us to postulate that the dmax shift could be due to the phantom scattered photons, which in turn were generated by the collimator scattered photons. Newly derived tissue-maximum ratio and scatter-maximum ratio data were used for dose profile calculations of 2 X 2, 4 X 4, and 10 X 10 cm field sizes. The agreement between experimental and calculated data was found to be +/- 2% within the geometrical edges of the fields and +/- 6% outside of them. A dose profile from the isocenter of a 2 X 2 cm square field moving through a 360 degree rotation arc was obtained and compared with that from the center of a 125I shielded source, as measured by Ling. Advantages and problems relating to the use of x-ray beams from linear accelerators in radiosurgery are discussed.

PTW-diamond detector: dose rate and particle type dependence.

In this paper the suitability of a PTW natural diamond detector (DD) for relative and reference dosimetry of photon and electron beams, with dose per pulse between 0.068 mGy and 0.472 mGy, was studied and the results were compared with those obtained by a stereotactic silicon detector (SFD). The results show that, in the range of the examined dose per pulse the DD sensitivity changes up to 1.8% while the SFD sensitivity changes up to 4.5%. The fitting parameter, delta, used to correct the dose per pulse dependence of solid state detectors, was delta = 0.993 +/- 0.002 and delta = 1.025 +/- 0.002 for the diamond detector and for the silicon diode, respectively. The delta values were found to be independent of particle type of two conventional beams (a 10 MV x-ray beam and a 21 MeV electron beam). So if delta is determined for a radiotherapy beam, it can be used to correct relative dosimetry for other conventional radiotherapy beams. Moreover the diamond detector shows a calibration factor which is independent of beam quality and particle type, so an empirical dosimetric formalism is proposed here to obtain the reference dosimetry. This formalism is based on a dose-to-water calibration factor and on an empirical coefficient, that takes into account the reading dependence on the dose per pulse.

p-type silicon detector for brachytherapy dosimetry.

The sensitivity of a cylindrical p-type silicon detector was studied by means of air and water measurements using different photon beams. A lead filter cap around the diode was used to minimize the dependence of the detector response as a function of the brachytherapy photon energy. The radial dose distribution of a high-activity 192Ir source in a brachytherapy phantom was measured by means of the shielded diode and the agreement of these data with theoretical evaluations confirms the method used to compensate diode response in the intermediate energy range. The diode sensitivity was constant over a wide range of dose rates of clinical interest; this allowed one to have a small detector calibrated in terms of absorbed dose in a medium. Theoretical evaluations showed that a single shielding filter around the p-type diode is sufficient to obtain accurate dosimetry for 192Ir, 137Cs, and 60Co brachytherapy sources.

A study of quality of bremsstrahlung spectra reconstructed from transmission measurements.

A numerical method for the reconstruction of bremsstrahlung spectra has been applied to the analysis of simulated data. The method is found to be reliable in reconstructing x-ray spectra of maximum energy up to 10 MeV. Measurements of aluminum transmission data carried out for five linear accelerators have also been analyzed by this method to determine the fractional energy fluence. The values of the Spencer-Attix water/air stopping power ratio, SS.A. w,air, reported as a function of the ratios TPR20 10, are in good agreement with computed results. Quality index values were correlated to mean incident energies of x-ray beams used in radiotherapy. The experimental setup has also provided information regarding the softening effect on the off-axis beam, which can be used in clinical computer dosimetry to correct conventional zero field size tissue maximum ratio.

A correction method for diamond detector signal dependence with proton energy.

Small dosimeters as solid state detectors can be useful for the dosimetric characterization and periodic quality control of radiotherapy proton beams. The calibration of solid state detectors for proton beams is not a solved problem especially for ophthalmologic proton beams, where these detectors present a LET-dependent signal. In this work a PTW diamond detector has been selected because of its good signal reproducibility (0.3%) and stable response with accumulated dose. A method that takes into account the LET dependence of the diamond detector signal, at 62 MeV proton beam, is here proposed. In particular an empirical correction factor, kDD(Eo) (Rres), has been determined as a function of the residual range quality index, to correct the diamond detector signal for a proton beam of incident effective energy E0= 62 MeV. A dedicated software allows us to use the diamond detector as an on-line reference dosimeter, where an ionization chamber may be difficult to use, or for periodic quality control procedures. The article also reports a comparison between the signal dependence on proton energy of silicon, diamond, and radiochromic film detectors.

Radiochromic film dosimetry of a low energy proton beam.

In this work some dosimetric characteristics of MD-55-2 GafChromic films were studied in a low energy proton beam (21.5 MeV) directly in a water phantom. The nonlinearity of the optical density was quantified by a factor P(lin). A correction factor P(en), that accounts for optical density dependence on the energy, was empirically determined. The effects of detector thickness in depth dose measurements and of the film orientation with respect to beam direction were investigated. The results show that the MD-55-2 films provide dose measurements with the films positioned perpendicularly to the proton beam. A dosimetric formalizm is proposed to determine the dose to water at depth d, with films oriented perpendicularly to the beam axis. This formalism uses a calibration factor of the radiochromic film determined directly on the proton beam at a reference depth in water, and the P(lin) factor, that takes into account the nonlinearity of the calibration curve and the P(en) factor that, in turn takes into account the change of proton beam energy in water. The MD-55-2 films with their high spatial resolution and the quasiwater equivalent material are attractive, positioned perpendicularly along the beam axis, for the absolute dose determination of very small beam sizes and modulated proton beams.

Dosimetric characterization of a large area pixel-segmented ionization chamber.

A pixel-segmented ionization chamber has been designed and built by Torino University and INFN. The detector features a 24 x 24 cm2 active area divided in 1024 independent cylindrical ionization chambers and can be read out in 500 micros without introducing dead time; the digital charge quantum can be adjusted between 100 fC and 800 fC. The sensitive volume of each single ionization chamber is 0.07 cm3. The purpose of the detector is to ease the two-dimensional (2D) verifications of fields with complex shapes and large gradients. The detector was characterized in a PMMA phantom using 60Co and 6 MV x-ray photon beams. It has shown good signal linearity with respect to dose and dose rate to water. The average sensitivity of a single ionization chamber was 2.1 nC/Gy, constant within 0.5% over one month of daily measurements. Charge collection efficiency was 0.985 at the operating polarization voltage of 400 V and 3.5 Gy/min dose rate. Tissue maximum ratio and output factor have been compared with a Farmer ionization chamber and were found in good agreement. The dose profiles have been compared with the ones obtained with an ionization chamber in water phantom for the field sizes supplied by a 3D-Line dynamic multileaf collimator. These results show that this detector can be used for 2D dosimetry of x-ray photon beams, supplying a good spatial resolution and sensibly reducing the time spent in dosimetric verification of complex radiation fields.

Applications of the Italian protocol for the calibration of brachytherapy sources.

The Associazione Italianà di Fisica Biomedica (AIFB; Italian Association of Biomedical Physics) has adopted the Italian protocol for the calibration of brachytherapy sources. The AIFB protocol allows measurements of the reference air kerma rate, Kr, within 1.7% (1 sigma). To measure Kr the AIFB protocol has identified a direct and an indirect procedure. The direct procedure is based on the use of spherical or cylindrical ionization chambers as local reference dosimeters positioned along the transverse bisector axis of the source. Once the source is specified by a Kr value, this can be used to calibrate a field instrument, such as a well-type ionization chamber, for further source calibrations by means of an indirect procedure. This paper reports the results obtained by the Physics Laboratory of the Università Cattolica del S Cuore (PL-UCSC), in terms of Kr calibration of five types of source, 169Yb, 192Ir and 137Cs. The role of the Kr determination for a brachytherapy source has been underlined when a new source such as the 169Yb seed model X1267 has been proposed for clinical use. The Kr values for 137Cs spherical sources differed by 5% from the vendor's mean value. The five types of source calibrated in terms of Kr were used to obtain the calibration factor. NKrsource, of an HDR-1000 well-type ionization chamber.

Implantation guidelines for 169 Yb seed interstitial treatments.

The adequacy of an interstitial implant carried out with a new radioactive source, the 169 Yb seed model X1267, has been examined by computing volumetric indices based on dose-volume histograms. The comparison of these indices with the ones computed for 125I seed implantations shows that the use of ytterbium seeds presents an improvement of the dose homogeneity in interstitial implants. This is due to the significant build-up associated with 169 Yb photons that reduces the rapid dose fall-off with the distance from the source. Moreover, relative to 192Ir, the lower photon energy gives 169 Yb the advantage in clinical use of reduced radiation exposure (i) to health care workers, (ii) to relatives of treated patients and (iii) to healthy neighbouring tissues of the patients if appropriate thin shielding is used.

Ion-recombination correction factor ksat for spherical ion chambers irradiated by continuous photon beams.

The large range of reference air kerma rates of brachytherapy sources involves the use of large-volume ionization chambers. When such ionization chambers are used the ion-recombination correction factor ksat has to be determined. In this paper three spherical ion chambers with volumes ranging from 30 to 10(4) cm3 have been irradiated by photons of a 192Ir source to determine the ksat factors. The ionization currents of the ion chambers as a function of the applied voltage and the air kerma rate have been analysed to determine the contribution of the initial and general ion recombination. The ksat values for large-volume ionization chambers obtained by considering the general ion recombination as predominant (Almond's approach) are in disagreement with the results obtained using methods that consider both initial and general ion-recombination contributions (Niatel's approach). Such disagreement can reach 0.7% when high currents are measured for a high-activity source calibration in terms of reference air kerma rate. In this study a new 'two-voltage' method, independent of the voltage ratio given by a dosimetry system, is proposed for practical dosimetry of continuous x- and gamma-radiation beams. In the case where the Almond approach is utilized, the voltage ratio V1/V2 should be less than 2 instead of Almond's limit of V1/V2 < 5.