High-Valent d7 NiIII versus d8 CuIII Oxidants in PCET.

Oxygenases have been postulated to utilize d4 FeIV and d8 CuIII oxidants in proton-coupled electron transfer (PCET) hydrocarbon oxidation. In order to explore the influence the metal ion and d-electron count can hold over the PCET reactivity, two metastable high-valent metal-oxygen adducts, [NiIII(OAc)(L)] (1b) and [CuIII(OAc)(L)] (2b), L = N,N'-(2,6-diisopropylphenyl)-2,6-pyridinedicarboxamidate, were prepared from their low-valent precursors [NiII(OAc)(L)]- (1a) and [CuII(OAc)(L)]- (2a). The complexes 1a/b-2a/b were characterized using nuclear magnetic resonance, Fourier transform infrared, electron paramagnetic resonance, X-ray diffraction, and absorption spectroscopies and mass spectrometry. Both complexes were capable of activating substrates through a concerted PCET mechanism (hydrogen atom transfer, HAT, or concerted proton and electron transfer, CPET). The reactivity of 1b and 2b toward a series of para-substituted 2,6-di-tert-butylphenols (p-X-2,6-DTBP; X = OCH3, C(CH3)3, CH3, H, Br, CN, NO2) was studied, showing similar rates of reaction for both complexes. In the oxidation of xanthene, the d8 CuIII oxidant displayed a small increase in the rate constant compared to that of the d7 NiIII oxidant. The d8 CuIII oxidant was capable of oxidizing a large family of hydrocarbon substrates with bond dissociation enthalpy (BDEC-H) values up to 90 kcal/mol. It was previously observed that exchanging the ancillary anionic donor ligand in such complexes resulted in a 20-fold enhancement in the rate constant, an observation that is further enforced by comparison of 1b and 2b to the literature precedents. In contrast, we observed only minor differences in the rate constants upon comparing 1b to 2b. It was thus concluded that in this case the metal ion has a minor impact, while the ancillary donor ligand yields more kinetic control over HAT/CPET oxidation.

Hydrogen Atom Transfer by a High-Valent Nickel-Chloride Complex.

Oxo-metal-halide moieties have often been implicated as C-H bond activating oxidants with the terminal oxo-metal entity identified as the electrophilic oxidant. The electrophilic reactivity of metal-halide species has not been investigated. We have prepared a high-valent nickel-halide complex [NiIII(Cl)(L)] (2, L = N,N'-(2,6-dimethylphenyl)-2,6-pyridinedicarboxamide) by one-electron oxidation of a [NiII(Cl)(L)]- precursor. 2 was characterized using electronic absorption, electron paramagnetic resonance, and X-ray absorption spectroscopies and mass spectrometry. 2 reacted readily with substrates containing either phenolic O-H or hydrocarbon C-H bonds. Analysis of the Hammett, Evans-Polanyi, and Marcus relationships between the determined rate constants and substrate pKa, X-H bond dissociation energy, and oxidation potential, respectively, was performed. Through this analysis, we found that 2 reacted by a hydrogen atom transfer (HAT) mechanism. Our findings shine light on enzymatic high-valent oxo-metal-halide oxidants and open new avenues for oxidative halogenation catalyst design.

Modulation of Nickel Pyridinedicarboxamidate Complexes to Explore the Properties of High-valent Oxidants.

High-valent Ni oxidants have been implicated in hydrocarbon oxidation catalysis, however, little is understood about the properties of these oxidants. Herein, a family of NiII complexes supported by a pyridinedicarboxamidate ligand and different ancillary ligands was synthesized. The series spans coordination numbers 4, 5, and 6, and contains neutral, mono- and di-anionic donor types. X-ray crystallography and magnetic measurements showed that the 4-coordinate complexes were square planar and low spin (S=0) and the 5- and 6-coordinate were intermediate spin (S=1). The NiII complexes could be oxidized by one electron to form a series of metastable NiIII species. EPR analysis confirmed their description as S=1/2 NiIII compounds with signal shape and hyperfine coupling dependent on the coordination environment. The oxidation of phenols by the NiIII species was probed, providing evidence for a correlation between oxidizing power and electron-donating properties of the supporting ligands. Critically, we found that the pyridinedicarboxamidate ligand may be a non-innocent proton acceptor in the oxidation reactions.

Tuning the Reactivity of Terminal Nickel(III)-Oxygen Adducts for C-H Bond Activation.

Two metastable NiIII complexes, [NiIII(OAc)(L)] and [NiIII(ONO2)(L)] (L = N,N'-(2,6-dimethylphenyl)-2,6-pyridinedicarboxamidate, OAc = acetate), were prepared, adding to the previously prepared [NiIII(OCO2H)(L)], with the purpose of probing the properties of terminal late-transition metal oxidants. These high-valent oxidants were prepared by the one-electron oxidation of their NiII precursors ([NiII(OAc)(L)]- and [NiII(ONO2)(L)]-) with tris(4-bromophenyl)ammoniumyl hexachloroantimonate. Fascinatingly, the reaction between any [NiII(X)(L)]- and NaOCl/acetic acid (AcOH) or cerium ammonium nitrate ((NH4)2[CeIV(NO3)6], CAN), yielded [NiIII(OAc)(L)] and [NiIII(ONO2)(L)], respectively. An array of spectroscopic characterizations (electronic absorption, electron paramagnetic resonance, X-ray absorption spectroscopies), electrochemical methods, and computational predictions (density functional theory) have been used to determine the structural, electronic, and magnetic properties of these highly reactive metastable oxidants. The NiIII-oxidants proved competent in the oxidation of phenols (weak O-H bonds) and a series of hydrocarbon substrates (some with strong C-H bonds). Kinetic investigation of the reactions with di-tert-butylphenols showed a 15-fold enhanced reaction rate for [NiIII(ONO2)(L)] compared to [NiIII(OCO2H)(L)] and [NiIII(OAc)(L)], demonstrating the effect of electron-deficiency of the O-ligand on oxidizing power. The oxidation of a series of hydrocarbons by [NiIII(OAc)(L)] was further examined. A linear correlation between the rate constant and the bond dissociation energy of the C-H bonds in the substrates was indicative of a hydrogen atom transfer mechanism. The reaction rate with dihydroanthracene (k2 = 8.1 M-1 s-1) compared favorably with the most reactive high-valent metal-oxidants, and showcases the exceptional reactivity of late transition metal-oxygen adducts.

Characterization and reactivity of a terminal nickel(III)-oxygen adduct.

High-valent terminal metal-oxygen adducts are hypothesized to be the potent oxidizing reactants in late transition metal oxidation catalysis. In particular, examples of high-valent terminal nickel-oxygen adducts are scarce, meaning there is a dearth in the understanding of such oxidants. A monoanionic Ni(II)-bicarbonate complex has been found to react in a 1:1 ratio with the one-electron oxidant tris(4-bromophenyl)ammoniumyl hexachloroantimonate, yielding a thermally unstable intermediate in high yield (ca. 95%). Electronic absorption, electronic paramagnetic resonance, and X-ray absorption spectroscopies and density functional theory calculations confirm its description as a low-spin (S = 1/2), square planar Ni(III)-oxygen adduct. This rare example of a high-valent terminal nickel-oxygen complex performs oxidations of organic substrates, including 2,6-di-tert-butylphenol and triphenylphosphine, which are indicative of hydrogen atom abstraction and oxygen atom transfer reactivity, respectively.

Nucleophilic reactivity of a copper(II)-superoxide complex.

Metal-bound superoxide intermediates are often implicated as electrophilic oxidants in dioxygen-activating metalloenzymes. In the nonheme iron α-ketoglutarate dependent oxygenases and pterin-dependent hydroxylases, however, Fe(III)-superoxide intermediates are postulated to react by nucleophilic attack on electrophilic carbon atoms. By reacting a Cu(II)-superoxide complex (1) with acyl chloride substrates, we have found that a metal-superoxide complex can be a very reactive nucleophile. Furthermore, 1 was found to be an efficient nucleophilic deformylating reagent, capable of Baeyer-Villiger oxidation of a number of aldehyde substrates. The observed nucleophilic chemistry represents a new domain for metal-superoxide reactivity. Our observations provide support for the postulated role of metal-superoxide intermediates in nonheme iron α-ketoglutarate dependent and pterin-dependent enzymes.

A wearable sensor for the detection of sodium and potassium in human sweat during exercise.

The SwEatch platform, a wearable sensor for sampling and measuring the concentration of electrolytes in human sweat in real time, has been improved in order to allow the sensing of two analytes. The solid contact ion-sensitive electrodes (ISEs) for the detection of Na+ and K+ have been developed in two alternative formulations, containing either poly(3,4-ethylenedioxythiophene) (PEDOT) or poly(3-octylthiophene-2,5-diyl) (POT) as a conductive polymer transducing component. The solution-processable POT formulation simplifies the fabrication process, and sensor to sensor reproducibility has been improved via partial automation using an Opentron® automated pipetting robot. The resulting electrodes showed good sensitivity (52.4 ± 6.3 mV/decade (PEDOT) and 56.4 ± 2.2 mV/decade (POT) for Na+ ISEs, and 45.7 ± 7.4 mV/decade (PEDOT) and 54.3 ± 1.5 mV/decade (POT) for K+) and excellent selectivity towards potential interferents present in human sweat (H+, Na+, K+, Mg2+, Ca2+). The 3D printed SwEatch platform has been redesigned to incorporate a double, mirrored fluidic unit which is capable of drawing sweat from the skin through passive capillary action and bring it in contact with two independent electrodes. The potentiometric signal generated by the electrodes is measured by an integrated electronics board, digitised and transmitted via Bluetooth to a laptop. The results obtained from on-body trials on athletes during cycling show a relatively small increase in sodium (1.89 mM-2.97 mM) and potassium (3.31 mM-7.25 mM) concentrations during the exercise period of up to 90 min.

Indirect evidence for a NiIII-oxyl oxidant in the reaction of a NiII complex with peracid.

The reaction of a NiII complex and meta-chloroperoxybenzoic acid (m-CPBA) resulted in the formation of a long-lived NiIII-chlorobenzoate complex that is a capable hydrocarbon oxidant. Analysis of the post-reaction decay products showed the formation of oxidised derivatives of the supporting ligand (a benzoxazine), and heterolytic O-O bond scission in m-CPBA. This evidence indicates formation of a more potent transient NiIII-oxyl species, which was further supported by DFT calculations.