Biodegradation Behavior Control for Shape Memory Polyester Poly(Glycerol-Dodecanoate): An In Vivo and In Vitro Study.

Poly(glycerol-dodecanoate) (PGD) has garnered increasing attention in biomedical engineering for its degradability, shape memory, and rubber-like mechanical properties. Adjustable degradation is important for biodegradable implants and is affected by various aspects, including material properties, mechanical environments, temperature, pH, and enzyme catalysis. The crosslinking and chain length characteristics of poly(lactic acid) and poly(caprolactone) have been widely used to adjust the in vivo degradation rate. The PGD degradation rate is affected by its crosslink density in in vitro hydrolysis; however, there is no difference in vivo. We believe that this phenomenon is caused by the differences in enzymatic conditions in vitro and in vivo. In this study, it is found that the degradation products of PGD with different molar ratios of hydroxyl and carboxyl (MRH/C) exhibit varied pH values, affecting the enzyme activity and thus achieving different degradation rates. The in vivo degradation of PGD is characterized by surface erosion, and its mass decreases linearly with degradation duration. The degradation duration of PGD is linearly extrapolated from 9-18 weeks when MRH/C is in the range of 2.00-0.75, providing a protocol for adjusting the degradation durations of subsequent implants made by PGD.

Dual-functioning phage-derived peptides encourage human bone marrow cell-specific attachment to mineralized biomaterials.

Cell instructive mineralized biomaterials are a promising alternative to conventional auto-, allo-, and xenograft therapies for the reconstruction of critical sized defects. Extracellular matrix proteins, peptide domains, and functional motifs demonstrating cell and mineral binding activity have been used to improve cell attachment. However, these strategies vary in their tissue regeneration outcomes due to lack of specificity to both regenerative cell populations and the material substrates. In order to mediate cell-specific interactions on apatite surfaces, we identified peptide sequences with high affinity towards apatite (VTKHLNQISQSY, VTK) and clonally derived human bone marrow stromal cells (DPIYALSWSGMA, DPI) using phage display. The primary aims of this study were to measure apatite binding affinity, human bone marrow stromal cell (hBMSC) adhesion strength, and peptide specificity to hBMSCs when the apatite and cell-specific peptides are combined into a dual-functioning peptide. To assess binding affinity to hydroxyapatite (HA), binding isotherms were constructed and peptide binding affinity (K1) determined. HBMSC, MC3T3 and mouse dermal fibroblast (MDF) adhesion strength on biomimetic apatite functionalized with single- and dual-functioning peptide sequences were evaluated using a centrifugation assay. DPI-VTK had the highest binding strength towards hBMSCs (p < 0.01). DPI-VTK, while promoting strong initial attachment to hBMSCs, did not encourage strong adhesions to MC3T3s or fibroblasts (p < 0.01). Taken together, phage display is a promising strategy to identify preferential cell and material binding peptide sequences that can tether specific cell populations onto specific biomaterial chemistries.

Innovative design of minimal invasive biodegradable poly(glycerol-dodecanoate) nucleus pulposus scaffold with function regeneration.

Minimally invasive biodegradable implants with regeneration have been a frontier trend in clinic. Degeneration of nucleus pulposus (NP) is irreversible in most of spine diseases, and traditional spinal fusion or discectomy usually injure adjacent segments. Here, an innovative minimally invasive biodegradable NP scaffold with function regeneration inspired by cucumber tendril is developed using shape memory polymer poly(glycerol-dodecanoate) (PGD), whose mechanical property is controlled to the similar with human NP by adjusting synthetic parameters. The chemokine stromal cell-derived factor-1α (SDF-1α) is immobilized to the scaffold recruiting autologous stem cells from peripheral tissue, which has better ability of maintaining disc height, recruiting autologous stem cells, and inducing regeneration of NP in vivo compared to PGD without chemokine group and hydrogel groups significantly. It provides an innovative way to design minimally invasive implants with biodegradation and functional recovery, especially for irreversible tissue injury, including NP, cartilage and so on.

Sterilization effects on poly(glycerol dodecanedioate): A biodegradable shape memory elastomer for biomedical applications.

Biodegradable shape memory polymers provide unique regenerative medicine approaches in minimally invasive surgeries. Once heated, thermally responsive shape memory polymer devices can be compressed, programmed to fit within a small profile, delivered in the cold programmed state, and expanded when heated to body temperature. We have previously developed a biodegradable shape memory elastomer (SME), poly(glycerol dodecanedioate) (PGD), with transition temperatures near 37°C exhibiting nonlinear elastic properties like numerous soft tissues. Using SMEs in the clinic requires disinfection and sterilization methods that conserve physiochemical, thermomechanical, and shape recovery properties. We evaluated disinfection protocols using 70% ethanol and UV254 nm for research applications and ethylene oxide (EtO) gas sterilization for clinical applications. Samples disinfected with ethanol for 0.5 and 1 min showed no changes in physiochemical material properties, but after 15 min showed slower recovery rates than controls (p < .05). EtO sterilization at 54.4°C decreased transition temperatures and shape recovery rate compared to EtO sterilization at 37.8°C (p < .01) and controls (p < .05). Aging samples for 9 months in a vacuum desiccator significantly reduced shape recovery, and the recovery rate in EtO sterilized samples compared to controls (p < .001). Cytotoxicity testing (ISO-10993.5C:2012) revealed media extractions from EtO sterilized samples, sterilized at 37.8°C, and high-density polyethylene negative control samples exhibit lower cytotoxicity (IC50) than Ethanol 1 min, UV 2 h, and EtO 54.4°C. Cell viability of NIH3T3 fibroblasts on sterilized surfaces was equivalent on EtO 37.7°C, EtO 54.4°C and Ethanol sterilized substrates. Finally, chromogenic bacterial endotoxin testing showed endotoxin levels were below the FDA prescribed levels for devices contacting blood and lymphatic tissues for ethanol 1 min, UV 120 min, EtO 37.7°C, EtO 54.4°C. These findings outline various disinfection and sterilization processes for research and pre-clinical application and provide a pathway for developing custom sterilization cycles for the translation of biomedical devices utilizing PGD shape memory polymers.

Percutaneous delivery and degradation of a shape memory elastomer poly(glycerol dodecanedioate) in porcine pulmonary arteries.

Shape memory biodegradable elastomers are an emergent class of biomaterials well-suited for percutaneous cardiovascular repair requiring nonlinear elastic materials with facile handling. We have previously developed a chemically crosslinked shape memory elastomer, poly (glycerol dodecanedioate) (PGD), exhibiting tunable transition temperatures around body temperature (34-38 °C), exhibiting nonlinear elastic properties approximating cardiac tissues, and favorable degradation rates in vitro. Degree of tissue coverage, degradation and consequent changes in polymer thermomechanical properties, and inflammatory response in preclinical animal models are unknown material attributes required for translating this material into cardiovascular devices. This study investigates changes in the polymer structure, tissue coverage, endothelialization, and inflammation of percutaneously implanted PGD patches (20 mm × 9 mm x 0.5 mm) into the branch pulmonary arteries of Yorkshire pigs for three months. After three months in vivo, 5/8 samples exhibited (100%) tissue coverage, 2/8 samples exhibited 85-95% tissue coverage, and 1/8 samples exhibited limited (<20%) tissue coverage with mild-moderate inflammation. PGD explants showed a (60-70%) volume loss and (25-30%) mass loss, and a reduction in polymer crosslinks. Lumenal and mural surfaces and the cross-section of the explant demonstrated evidence of degradation. This study validates PGD as an appropriate cardiovascular engineering material due to its propensity for rapid tissue coverage and uneventful inflammatory response in a preclinical animal model, establishing a precedent for consideration in cardiovascular repair applications.

External airway splint placement for severe pediatric tracheobronchomalacia.

OBJECTIVE: To present external airway splinting with bioabsorbable airway supportive devices (ASD) for severe, life-threatening cases of pediatric tracheomalacia (TM) or tracheobronchomalacia (TBM). METHODS: A retrospective cohort was performed for 5 pediatric patients with severe TM or TBM who underwent ASD placement. Devices were designed and 3D-printed from a bioabsorbable material, polycaprolactone (PCL). Pre-operative planning included 3-dimensional airway modeling of tracheal collapse and tracheal suture placement using nonlinear finite element (FE) methods. Pre-operative modeling revealed that triads along the ASD open edges and center were the most effective suture locations for optimizing airway patency. Pediatric cardiothoracic surgery and otolaryngology applied the ASDs by suspending the trachea to the ASD with synchronous bronchoscopy. Respiratory needs were trended for all cases. Data from pediatric patients with tracheostomy and diagnosis of TM or TBM, but without ASD, were included for discussion. RESULTS: Five patients (2 Females, 3 Males, ages 2-9 months at time of ASD) were included. Three patients were unable to wean from respiratory support after vascular ring division; all three weaned to room air post-ASD. Two patients received tracheostomies prior to ASD placement, but continued to experience apparent life-threatening events (ALTE) and required ventilation with supraphysiologic ventilator settings. One patient weaned respiratory support successfully after ASD placement. The last patient died post-ASD due to significant respiratory co-morbidity. CONCLUSION: ASD can significantly benefit patients with severe, unrelenting tracheomalacia or tracheobronchomalacia. Proper multidisciplinary case deliberation and selection are key to success with ASD. Pre-operative airway modeling allows proper suture placement to optimally address the underlying airway collapse.

Finite element analysis of esophageal atresia repair with biodegradable polymer sleeves.

Esophageal atresia, which occurs in 1 in every 4100 live births, is a potentially lethal congenital malformation resulting in discontinuity of the esophagus. Treatment requires approximating the disconnected esophageal segments and suturing the ends to restore continuity. Due to excessive anastomotic tension, leaks and strictures are prevalent in primary surgical repair of the esophagus especially in the subset of neonates presenting with long gap atresia (>3 cm between esophageal segments). Extracellular matrix derived scaffolds and biodegradable polymer scaffolds have been investigated in preclinical models for use in alleviating esophageal anastomotic tension with varying degrees of success. We have previously described the suitability of biodegradable shape memory materials for use in a number of soft tissue repair applications. Developing repair strategies addressing esophageal atresia requires a framework for approximating tension at the anastomosis. In this study, we describe a computational framework for approximating esophageal anastomotic tension to study the impact of primary and device supported repair. The esophagus was modeled as an idealized concentric cylinder comprised of mucosal and muscle layers described by nonlinear strain energy functions and a mixed fiber model with a Neo-Hookean base material (FEBIO studio). Sutures were modeled as nonlinear elastic springs carrying only tension, and shape memory polymers were modeled as nonlinear elastic materials using one term Ogden parameters. The impact of suture bite (length of suture from anastomosis), sleeve material properties, sleeve suture strategy, and gap length were evaluated with respect to anastomotic LaGrangian strain, displacement magnitude, and strain energy density. With increasing gap length, there was an increase in anastomotic strain, displacement magnitude and strain energy density. Increasing the suture bite length decreased strain at the anastomosis. Application of the sleeve reduced strain, displacement and strain energy to a greater extent in longer gap atresia. Increasing the number of sutures to apply the sleeve did not decrease the esophageal strain compared to sleeves with lesser number of sutures. Sleeve material testing revealed an interplay between the nonlinear mechanical properties of the selected materials and their contribution to reducing anastomotic tension. Taken together this study provides a unique framework for computational verification of design hypothesis broadly addressing clinical procedure optimization, material design, and device design for surgical repair of esophageal atresia.

Clinical grade manufacture of 3D printed patient specific biodegradable devices for pediatric airway support.

Implantable patient-specific devices are the next frontier of personalized medicine, positioned to improve the quality of care across multiple clinical disciplines. Translation of patient-specific devices requires time- and cost-effective processes to design, verify and validate in adherence to FDA guidance for medical device manufacture. In this study, we present a generalized strategy for selective laser sintering (SLS) of patient-specific medical devices following the prescribed guidance for additive manufacturing of medical devices issued by the FDA in 2018. We contextualize this process for manufacturing an Airway Support Device, a life-saving tracheal and bronchial implant restoring airway patency for pediatric patients diagnosed with tracheobronchomalacia and exhibiting partial or complete airway collapse. The process covers image-based modeling, design inputs, design verification, material inputs and verification, device verification, and device validation, including clinical results. We demonstrate how design and material assessment lead to verified Airway Support Devices that achieve desired airway patency and reduction in required Positive End-Expiratory Pressure (PEEP) after patient implantation. We propose this process as a template for general quality control of patient-specific, 3D printed implants.

Early preclinical evaluation of a novel, computer aided designed, 3D printed, bioresorbable posterior cricoid scaffold.

OBJECTIVES: The posterior cricoid split with rib graft is a procedure that elegantly corrects pediatric posterior glottic stenosis and subglottic stenosis. Currently, the procedure requires harvesting of rib cartilage which leaves room for optimization. With use of three dimensional printing technology, our objective was to design a device that would negate the need for costal cartilage harvesting in this procedure. METHODS: An optimized, novel polycaprolactone scaffold was designed using computer aided design software and three dimensional printing. A pilot proof of concept study was conducted with implantation of the device in three porcine animal subjects. Device was evaluated by post-procedural clinical course, endoscopic exams, post-mortem exam, and histological evaluation. RESULTS: A series of variably sized scaffolds were created. The scaffolds showed structural integrity and successfully expanded the cricoid cartilage in the porcine model study. Post-operative endoscopy and clinical exams demonstrated no signs of implant instability or failure. Gross and histologic exams showed successful mucosalization over the scaffold and cartilage ingrowth by six weeks. CONCLUSION: This porcine animal pilot study demonstrated early success of a computer-aided designed, 3D printed, bioresorbable PCL posterior graft scaffold. The scaffolds eliminate the need for costal cartilage harvesting and had excellent surgical usability. The scaffolds functioned as designed, offering proof of concept and grounds for further evaluation to expand on this small pilot study with larger animal studies and continued design refinement.

Evaluating Directional Dependency of Selective Laser Sintered Patient Specific Biodegradable Devices to Improve Predictive Modeling and Design Verification.

Additive manufacturing, or 3D printing, of the bioresorbable polymer [Formula: see text]-polycaprolactone (PCL) is an emerging tissue engineering solution addressing patient specific anatomies. Predictively modeling the mechanical behavior of 3D printed parts comprised of PCL improves the ability to develop patient specific devices that meet design requirements while reducing the testing of extraneous design variants and development time for emergency devices. Predicting mechanical behavior of 3D-printed devices is limited by the variability of effective material moduli that are determined in part by the 3D printing manufacturing process. Powder fusion methods, specifically laser sintering, are known to produce parts with internal porosity ultimately impacting the mechanical performance of printed devices. This study investigates the role of print direction and part size on the material and structural properties of laser sintered PCL parts. Solid PCL cylinders were printed in the XY (perpendicular to laser) and Z direction (parallel to laser), scanned using microcomputed tomography, and mechanically tested under compression. Compositional, structural, and functional properties of the printed parts were evaluated with differential scanning calorimetry, gel permeation chromatography, microcomputed tomography, and mechanical testing. Computational models of printed and scanned cylinders were fit to experimental data to derive effective moduli. Effective moduli were used to predict the mechanical behavior of splints used for emergency repair of severe tracheobronchomalacia. Laser sintering did not cause significant differences in polymer material properties compared to unmanufactured powder. Effective moduli (Eeff) were greater for larger part sizes (p < 0.01) and for parts oriented in the XY direction compared to the Z direction (p < 0.001). These dependencies were congruent with the differences in void volumes associated with the print direction (p < 0.01) and part size (p < 0.01). Finite element models of splint parallel compression tests utilizing the Eeff dependent on print direction and size agreed with experimental closed compression tests of splints. Evaluating the microstructural properties of printed parts and selecting effective moduli for finite element models based on manufacturing parameters allows accurate prediction of device performance. These findings allow testing of a greater number of device design variants in silico to accomodate patient specific anatomies towards providing higher quality parts while lowering overall time and costs of manufacturing and testing.

Modulating nonlinear elastic behavior of biodegradable shape memory elastomer and small intestinal submucosa(SIS) composites for soft tissue repair.

Structural repair of soft tissue for regenerative therapies can be advanced by developing biocompatible and bioresorbable materials with mechanical properties similar to the tissue targeted for therapy. Developing new materials modeling soft tissue mechanics can mitigate many limitations of material based therapies, specifically concerning the mechanical stress and deformation the material imposes on surrounding tissue structures. However, many elastomeric materials used in soft tissue repair lack the ability to be delivered through minimally invasive surgical (MIS) or transcatheter routes and require open surgical approaches for placement and application. We have developed a biocompatible and fully biodegradable shape memory elastomer, poly-(glycerol dodecanedioate) (PGD), which fulfills the requirements for hyperelasticity and exhibits shape memory behavior to serve as a novel substrate material for regenerative therapy in minimally invasive clinical procedures. Our previous work demonstrated control over the tangent modulus at 12.5% compressive strain between 1 and 3 MPa by increasing the crosslinking density in the polymer. In order to improve control over a broader range of mechanical properties, nonlinear behavior, and toughness, we 1) varied PGD physical crosslink density, 2) incorporated sheets of porcine small intestinal submucosa (SIS, Cook Biotech, Inc.) with varying thickness, and 3) mixed lyophilized SIS particulates into PGD at different weight percentages. Tensile testing (ASTM D412a) revealed PGD containing SIS sheets of were stiffer than controls (p < 0.01). Incorporating lyophilized SIS particulates into PGD increased the strain to failure (p < 0.001) compared to PGD controls. Test specimens with 1 ply sheets had greater tear strength (ASTM D624c) compared to PGD tear specimens prepared control specimens (p < 0.001). However, incorporating SIS particulates decreased tear strength of PGD-SIS 0.5 wt% particulate composites (p < 0.01) compared to PGD controls. Incorporating 2 ply and 4 ply sheets and 0.5 wt% particulates into PGD decreased the fixity and recovery of composite materials compared to controls (p < 0.01). Nonlinear modeling of stress strain curves under uniaxial tension demonstrated tunability of PGD-SIS composite materials to model various nonlinear soft tissues. These findings support the use of shape memory PGD-SIS composite materials towards the design of implantable devices for a variety of soft tissue regeneration applications by minimally invasive surgery.

Degradation properties of a biodegradable shape memory elastomer, poly(glycerol dodecanoate), for soft tissue repair.

Development of biodegradable shape memory elastomers (SMEs) is driven by the growing need for materials to address soft tissue pathology using a minimally invasive surgical approach. Composition, chain length and crosslinking of biocompatible polymers like PCL and PLA have been investigated to control mechanical properties, shape recovery and degradation rates. Depending on the primary mechanism of degradation, many of these polymers become considerably stiffer or softer resulting in mechanical properties that are inappropriate to support the regeneration of surrounding soft tissues. Additionally, concerns regarding degradation byproducts or residual organic solvents during synthesis accelerated interest in development of materials from bioavailable monomers. We previously developed a biodegradable SME, poly(glycerol dodecanoate) (PGD), using biologically relevant metabolites and controlled synthesis conditions to tune mechanical properties for soft tissue repair. In this study, we investigate the influence of crosslinking density on the mechanical and thermal properties of PGD during in vitro and in vivo degradation. Results suggest polymer degradation in vivo is predominantly driven by surface erosion, with no significant effects of initial crosslinking density on degradation time under the conditions investigated. Importantly, mechanical integrity is maintained during degradation. Additionally, shifts in melt transitions on thermograms indicate a potential shift in shape memory transition temperatures as the polymers degrade. These findings support the use of PGD for soft tissue repair and warrant further investigation towards tuning the molecular and macromolecular properties of the polymer to tailor degradation rates for specific clinical applications.

Cell and Material-Specific Phage Display Peptides Increase iPS-MSC Mediated Bone and Vasculature Formation In Vivo.

Biomimetically designed materials matching the chemical and mechanical properties of tissue support higher mesenchymal stem cell (MSC) adhesion. However, directing cell-specific attachment and ensuring uniform cell distribution within the interior of 3D biomaterials remain key challenges in healing critical sized defects. Previously, a phage display derived MSC-specific peptide (DPIYALSWSGMA, DPI) was combined with a mineral binding sequence (VTKHLNQISQSY, VTK) to increase the magnitude and specificity of MSC attachment to calcium-phosphate biomaterials in 2D. This study investigates how DPI-VTK influences quantity and uniformity of iPS-MSC mediated bone and vasculature formation in vivo. There is greater bone formation in vivo when iPS-MSCs are transplanted on bone-like mineral (BLM) constructs coated with DPI-VTK compared to VTK (p < 0.002), uncoated BLM (p < 0.037), acellular BLM/DPI-VTK (p < 0.003), and acellular BLM controls (p < 0.01). This study demonstrates, for the first time, the ability of non-native phage-display designed peptides to spatially control uniform cell distribution on 3D scaffolds and increase the magnitude and uniformity of bone and vasculature formation in vivo. Taken together, the study validates phage display as a novel technology platform to engineer non-native peptides with the ability to drive cell specific attachment on biomaterials, direct bone regeneration, and engineer uniform vasculature in vivo.

Ceramides and other bioactive sphingolipid backbones in health and disease: lipidomic analysis, metabolism and roles in membrane structure, dynamics, signaling and autophagy.

Sphingolipids are comprised of a backbone sphingoid base that may be phosphorylated, acylated, glycosylated, bridged to various headgroups through phosphodiester linkages, or otherwise modified. Organisms usually contain large numbers of sphingolipid subspecies and knowledge about the types and amounts is imperative because they influence membrane structure, interactions with the extracellular matrix and neighboring cells, vesicular traffic and the formation of specialized structures such as phagosomes and autophagosomes, as well as participate in intracellular and extracellular signaling. Fortunately, "sphingolipidomic" analysis is becoming feasible (at least for important subsets such as all of the backbone "signaling" subspecies: ceramides, ceramide 1-phosphates, sphingoid bases, sphingoid base 1-phosphates, inter alia) using mass spectrometry, and these profiles are revealing many surprises, such as that under certain conditions cells contain significant amounts of "unusual" species: N-mono-, di-, and tri-methyl-sphingoid bases (including N,N-dimethylsphingosine); 3-ketodihydroceramides; N-acetyl-sphingoid bases (C2-ceramides); and dihydroceramides, in the latter case, in very high proportions when cells are treated with the anticancer drug fenretinide (4-hydroxyphenylretinamide). The elevation of DHceramides by fenretinide is befuddling because the 4,5-trans-double bond of ceramide has been thought to be required for biological activity; however, DHceramides induce autophagy and may be important in the regulation of this important cellular process. The complexity of the sphingolipidome is hard to imagine, but one hopes that, when partnered with other systems biology approaches, the causes and consequences of the complexity will explain how these intriguing compounds are involved in almost every aspect of cell behavior and the malfunctions of many diseases.

Dual-functioning peptides discovered by phage display increase the magnitude and specificity of BMSC attachment to mineralized biomaterials.

Design of biomaterials for cell-based therapies requires presentation of specific physical and chemical cues to cells, analogous to cues provided by native extracellular matrices (ECM). We previously identified a peptide sequence with high affinity towards apatite (VTKHLNQISQSY, VTK) using phage display. The aims of this study were to identify a human MSC-specific peptide sequence through phage display, combine it with the apatite-specific sequence, and verify the specificity of the combined dual-functioning peptide to both apatite and human bone marrow stromal cells. In this study, a combinatorial phage display identified the cell binding sequence (DPIYALSWSGMA, DPI) which was combined with the mineral binding sequence to generate the dual peptide DPI-VTK. DPI-VTK demonstrated significantly greater binding affinity (1/KD) to apatite surfaces compared to VTK, phosphorylated VTK (VTKphos), DPI-VTKphos, RGD-VTK, and peptide-free apatite surfaces (p < 0.01), while significantly increasing hBMSC adhesion strength (τ50, p < 0.01). MSCs demonstrated significantly greater adhesion strength to DPI-VTK compared to other cell types, while attachment of MC3T3 pre-osteoblasts and murine fibroblasts was limited (p < 0.01). MSCs on DPI-VTK coated surfaces also demonstrated increased spreading compared to pre-osteoblasts and fibroblasts. MSCs cultured on DPI-VTK coated apatite films exhibited significantly greater proliferation compared to controls (p < 0.001). Moreover, early and late stage osteogenic differentiation markers were elevated on DPI-VTK coated apatite films compared to controls. Taken together, phage display can identify non-obvious cell and material specific peptides to increase human MSC adhesion strength to specific biomaterial surfaces and subsequently increase cell proliferation and differentiation. These new peptides expand biomaterial design methodology for cell-based regeneration of bone defects. This strategy of combining cell and material binding phage display derived peptides is broadly applicable to a variety of systems requiring targeted adhesion of specific cell populations, and may be generalized to the engineering of any adhesion surface.

Inhibition of osteoblast mineralization by phosphorylated phage-derived apatite-specific peptide.

Functionalization of biomaterials with material- and cell-specific peptide sequences allows for better control of their surface properties and communication with the surrounding environment. Using a combinatorial phage display approach, we previously identified the peptide VTKHLNQISQSY (VTK) with specific affinity to biomimetic apatite. Phosphorylation of the serine residues of the peptide (pVTK) caused a significant increase in binding to apatite, as well as a dose-dependent inhibition of osteoblast mineralization. In this study, we investigated the mechanisms behind pVTK mediated inhibition of mineralization using MC3T3 cells and testing the hypothesis that mineralization is inhibited via alteration of the Enpp1-TNAP-Ank axis. Inhibition of mineralization was not due to disruption of collagen deposition or calcium chelation by the negatively charged pVTK. The timing of peptide administration was important in inhibiting mineralization - pVTK had a greater effect at later stages of osteogenic differentiation (days 7-12 of culture corresponding to matrix maturation and mineralization), and could prevent progression of mineralization once it had started. pVTK treatment resulted in a significant decrease in ectonucleotide pyrophosphatase/phosphodiesterase 1 (Enpp1) enzyme activity and gene expression. The expression of ankylosis protein (Ank), osteopontin (OPN) and Pit-1 genes was also significantly reduced with peptide treatment, while tissue non-specific alkaline phosphatase (TNAP), bone sialoprotein (BSP), and Runx2 gene expression was significantly higher. The ability of pVTK to inhibit mineralization can potentially be translated into therapeutics against pathological calcification seen in cardiovascular disease, osteoarthritis or craniosynostosis, or be used to prevent failure of biomaterials due to calcification, such as bioprosthetic heart valves.

Enigmol: a novel sphingolipid analogue with anticancer activity against cancer cell lines and in vivo models for intestinal and prostate cancer.

Sphingoid bases are cytotoxic for many cancer cell lines and are thought to contribute to suppression of intestinal tumorigenesis in vivo by ingested sphingolipids. This study explored the behavior of a sphingoid base analogue, (2S,3S,5S)-2-amino-3,5-dihydroxyoctadecane (Enigmol), that cannot be phosphorylated by sphingosine kinases and is slowly N-acylated and therefore is more persistent than natural sphingoid bases. Enigmol had potential anticancer activity in a National Cancer Institute (NCI-60) cell line screen and was confirmed to be more cytotoxic and persistent than naturally occurring sphingoid bases using HT29 cells, a colon cancer cell line. Although the molecular targets of sphingoid bases are not well delineated, Enigmol shared one of the mechanisms that has been found for naturally occurring sphingoid bases: normalization of the aberrant accumulation of ß-catenin in the nucleus and cytoplasm of colon cancer cells due to defect(s) in the adenomatous polyposis coli (APC)/ß-catenin regulatory system. Enigmol also had antitumor efficacy when administered orally to Min mice, a mouse model with a truncated APC gene product (C57Bl/6J(Min/+) mice), decreasing the number of intestinal tumors by half at 0.025% of the diet (w/w), with no evidence of host toxicity until higher dosages. Enigmol was also tested against the prostate cancer cell lines DU145 and PC-3 in nude mouse xenografts and suppressed tumor growth in both. Thus, Enigmol represents a novel category of sphingoid base analogue that is orally bioavailable and has the potential to be effective against multiple types of cancer.

Novel synthesis and biological evaluation of enigmols as therapeutic agents for treating prostate cancer.

Enigmol is a synthetic, orally active 1-deoxysphingoid base analogue that has demonstrated promising activity against prostate cancer. In these studies, the pharmacologic roles of stereochemistry and N-methylation in the structure of enigmols were examined. A novel enantioselective synthesis of all four possible 2S-diastereoisomers of enigmol (2-aminooctadecane-3,5-diols) from l-alanine is reported, which features a Liebeskind-Srogl cross-coupling reaction between l-alanine thiol ester and (E)-pentadec-1-enylboronic acid as the key step. In vitro biological evaluation of the four enigmol diastereoisomers and 2S,3S,5S-N-methylenigmol against two prostate cancer cell lines (PC-3 and LNCaP) indicates that all but one diastereomer demonstrate potent oncolytic activity. In nude mouse xenograft models of human prostate cancer, enigmol was equally effective as standard prostate cancer therapies (androgen deprivation or docetaxel), and two of the enigmol diastereomers, 2S,3S,5R-enigmol and 2S,3R,5S-enigmol, also caused statistically significant inhibition of tumor growth. A pharmacokinetic profile of enigmol and N-methylenigmol is also presented.