ABSTRACT
To investigate the molecular mechanisms underlying the differences in iris color in quail, the transcriptome of iris tissue from black quail and Korean quail at day 10 of hatching was RNA sequenced in this study. The differentially expressed genes (DEGs) were screened, functionally annotated and enriched after the quality control and mapping of the raw data. RT-qPCR validation was performed using EIF2S3 as an internal reference gene. The screened SNPs were studied by bioinformatics analysis and iris color correlation analysis. The results showed that there were 425 upregulated genes and 364 downregulated genes in 789 DEGs. Gene Ontology (GO) enrichment analysis revealed that 139 DEGs were significantly enriched in 154 GO terms. The Kyoto Encyclopedia of Genes and Genomes enrichment results showed that the Notch signaling pathway, melanogenesis and tyrosine metabolism were associated with pigment synthesis (p < 0.05). The expression levels of the ASIP, MLPH, PMEL, TYR and SOX10 genes were significantly different in black quail iris and Korean quail iris, as verified by RT-qPCR. The SOX10 gene c.324G>C mutation, which caused the replacement of p.Glu108Asp, had a highly significant correlation with iris color in black quail and Korean quail, which may be one of the reasons for different in iris color between these two quail species.
Subject(s)
Gene Expression Profiling , Mutation, Missense , Animals , Transcriptome , Sequence Analysis, RNA , PhenotypeABSTRACT
In this research, two polymers of P1 and P2 based on monomers consisting of thiophene, 3,4-Ethylenedioxythiophene (EDOT) and diketopyrrolopyrrole (DPP) are designed and obtained via Stille coupling polycondensation. The material shows excellent coplanarity and structural regularity due to the fine planarity of DPP itself and the weak non-covalent bonding interactions existing between the three units. Two different lengths of non-conjugated side chains are introduced and this has an effect on the intermolecular chain stacking, causing the film absorption to display different characteristic properties. On the other hand, the difference in the side chains does not have a significant effect on the thermal stability and the energy levels of the frontier orbitals of the materials, which is related to the fact that the materials both feature extremely high conjugation lengths and specific molecular compositions. Microscopic investigations targeting the side chains provide a contribution to the further design of organic semiconductor materials that meet device requirements. Tests based on organic transistors show a slight difference in conductivity between the two polymers, with P2 having better hole mobility than P1. This study highlights the importance of the impact of side chains on device performance, especially in the field of organic electronics.
Subject(s)
Electronics , Ketones , Polymers , Pyrroles , Thiophenes , Electric ConductivityABSTRACT
Oligomers and polymers consisting of multiple thiophenes are widely used in organic electronics such as organic transistors and sensors because of their strong electron-donating ability. In this study, a solution to the problem of the poor solubility of polythiophene systems was developed. A novel π-conjugated polymer material, PDPP-5Th, was synthesized by adding the electron acceptor unit, DPP, to the polythiophene system with a long alkyl side chain, which facilitated the solution processing of the material for the preparation of devices. Meanwhile, the presence of the multicarbonyl groups within the DPP molecule facilitated donor-acceptor interactions in the internal chain, which further improved the hole-transport properties of the polythiophene-based material. The weak forces present within the molecules that promoted structural coplanarity were analyzed using theoretical simulations. Furthermore, the grazing incidence wide-angle X-ray scanning (GIWAXS) results indicated that PDPP-5Th features high crystallinity, which is favorable for efficient carrier migration within and between polymer chains. The material showed hole transport properties as high as 0.44 cm2 V-1 s-1 in conductivity testing. Our investigations demonstrate the great potential of this polymer material in the field of optoelectronics.
ABSTRACT
Polythiophene, as a class of potential electron donor units, is widely used in organic electronics such as transistors. In this work, a novel polymeric material, PDPPTT-FT, was prepared by incorporating the electron acceptor unit into the polythiophene system. The incorporation of the DPP molecule assists in improving the solubility of the material and provides a convenient method for the preparation of field effect transistors via subsequent solution processing. The introduction of fluorine atoms forms a good intramolecular conformational lock, and theoretical calculations show that the structure displays excellent co-planarity and regularity. Grazing incidence wide-angle X-ray (GIWAXS) results indicate that the PDPPTT-FT is highly crystalline, which facilitates carrier migration within and between polymer chains. The hole mobility of this π-conjugated material is as high as 0.30 cm2 V-1 s-1 in organic transistor measurements, demonstrating the great potential of this polymer material in the field of optoelectronics.
ABSTRACT
Organic dye semiconductors have received increasing attention as the next generation of semiconductors, and one of their potential applications is as a core component of organic transistors. In this study, two novel diketopyrrolopyrrole (DPP) dye core-based materials were designed and separately prepared using Stille coupling reactions under different palladium catalyst conditions. The molecular weights and elemental compositions were tested to demonstrate that both catalysts could be used to successfully prepare materials of this structure, with the main differences being the weight-average molecular weight and the dispersion index. PDPP-2Py-2Tz I with a longer conjugation length exhibited better thermodynamic stability than the counterpart polymer PDPP-2Py-2Tz II. The intrinsic optical properties of the polymers were relatively similar, while the electrochemical tests showed small differences in their energy levels. The polymers obtained with different catalysts displayed similar and moderate electron mobility in transistor devices, while PDPP-2Py-2Tz I possessed a higher switching ratio. Our study provides a comparison of such dye materials under different catalytic conditions and also demonstrates the great potential of dye materials for optoelectronic applications.
ABSTRACT
The thyroid nodule segmentation of ultrasound images is a critical step for the early diagnosis of thyroid cancers in clinics. Due to the weak edge of ultrasound images and the complexity of thyroid tissue structure, it is still challenging to accurately segment the delicate contour of thyroid nodules. A local and context-attention adaptive network (LCA-Net) for thyroid nodule segmentation is proposed to address these shortcomings, which leverages both local feature information from convolution neural networks and global context information from transformers. Firstly, since most existing thyroid nodule segmentation models are skilled at local detail features and lose some context information, we propose a transformers-based context-attention module to capture more global associative information for the network and perceive the edge information of the nodule contour. Secondly, a backbone module with 7×1, 1×7 convolutions and the activation function Mish is designed, which enlarges the receptive field and extracts more feature details. Furthermore, a nodule adaptive convolution (NAC) module is introduced to adaptively deal with thyroid nodules of different sizes and positions, thereby improving the generalization performance of the model. Simultaneously, an optimized loss function is proposed to solve the pixels class imbalance problem in segmentation. The proposed LCA-Net, validated on the public TN-SCUI2020 and TN3K datasets, achieves Dice scores of 90.26% and 82.08% and PA scores of 98.87% and 96.97%, respectively, which outperforms other state-of-the-art thyroid nodule segmentation models. This paper demonstrates the superiority of the proposed LCA-Net for thyroid nodule segmentation, which possesses strong generalization performance and promising segmentation accuracy. Consequently, the proposed model has wide application prospects for thyroid nodule diagnosis in clinics.
Subject(s)
Thyroid Nodule , Attention , Humans , Image Processing, Computer-Assisted/methods , Neural Networks, Computer , Thyroid Nodule/diagnostic imaging , UltrasonographyABSTRACT
Designing therapeutic and sensor materials to diagnose and eliminate bacterial infections remains a significant challenge for active theragnostic nanoprobes. In the present work, fluorescent/electroactive poly(3-hexylthiophene) P3HT nanoparticles (NPs) stabilized with quaternary ammonium salts using cetyltrimethylammonium bromide (CTAB), (CTAB-P3HT NPs) were prepared using a simple mini-emulsion method. The morphology, spectroscopic properties and electronic properties of CTAB-P3HT NPs were characterized by DLS, zeta potential, SEM, TEM, UV-vis spectrophotometry, fluorescence spectroscopy and electrochemical impedance spectroscopy (EIS). In an aqueous solution, CTAB-P3HT NPs were revealed to be uniformly sized, highly fluorescent and present a highly positively charged NP surface with good electroactivity. Dual detection was demonstrated as the binding of the bacteria to NPs could be observed by fluorescence quenching as well as by the changes in EIS. Binding of E. coli to CTAB-P3HT NPs was demonstrated and LODs of 5 CFU/mL and 250 CFU/mL were obtained by relying on the fluorescence spectroscopy and EIS, respectively. The antimicrobial activity of CTAB-P3HT NPs on bacteria and fungi was also studied under dark and nutritive conditions. An MIC and an MBC of 2.5 µg/mL were obtained with E. coli and with S. aureus, and of 0.312 µg/mL with C. albicans. Additionally a good biocompatibility toward normal human cells (WI38) was observed, which opens the way to their possible use as a therapeutic agent.
Subject(s)
Anti-Infective Agents , Nanoparticles , Anti-Infective Agents/pharmacology , Escherichia coli , Humans , Staphylococcus aureus , ThiophenesABSTRACT
In this study, optical and structural characterizations of near-infrared-emitting alloyed CdSeTe quantum dots (QDs) are measured after the dissolution in toluene. Luminescence spectra are obtained from alloyed CdSeTe QDs under 800 nm femtosecond laser excitation. With increasing pump fluence, the line width or full width at half maximum (FWHM) of photoluminescence (PL) spectrum becomes larger than 10 nm due to increasing temperature. Ultrafast spectroscopic properties of CdSeTe QDs are investigated by means of time-resolved PL, transient absorption (TA) and Z scan techniques. Moreover, open-aperture (OA) Z scan measurement is used to clarify the composition and pump fluence dependence of optical nonlinearity under femtosecond laser excitation. With increasing pump fluence, evolution from saturable absorption to reverse saturable absorption in CdSeTe QDs is observed. The transition process is analyzed via a phenomenological model based on nonlinear absorption coefficient and saturation intensity, which indicates that CdSeTe QDs have potential for applications in all-optical switching devices.
ABSTRACT
Recently, the concept of the difference and sum co-array (DSCa) has attracted much attention in array signal processing due to its high degree of freedom (DOF). In this paper, the DSCa of the nested array (NA) is analyzed and then an improved nested configuration known as the diff-sum nested array (DsNA) is proposed. We find and prove that the sum set for the NA contains all the elements in the difference set. Thus, there exists the dual characteristic between the two sets, i.e., for the difference result between any two sensor locations of the NA, one equivalent non-negative/non-positive sum result of two other sensor locations can always be found. In order to reduce the redundancy for further DOF enhancement, we develop a new DsNA configuration by moving nearly half the dense sensors of the NA to the right side of the sparse uniform linear array (ULA) part. These moved sensors together with the original sparse ULA form an extended sparse ULA. For analysis, we provide the closed form expressions of the DsNA locations as well as the DOF. Compared with some novel sparse arrays with large aperture such as the NA, coprime array and augmented nested array, the DsNA can achieve a higher number of DOF. The effectiveness of the proposed array is proved by the simulations.
ABSTRACT
In this paper, a generalized L-shaped nested array based on the fourth-order difference co-array is proposed for two-dimensional (2D) directions' estimation. The new structure framework makes full use of the physical sensor locations to form a virtual uniform rectangular array (URA) as large as possible. As it utilizes the fourth-order difference instead of the traditional second-order difference result, this structure framework can acquire a much higher degree-of-freedom (DOF) than the existing 2D sparse arrays. The proposed structures have two advantages. One is that the subarrays can be chosen as any nested-class arrays, which makes the sparse array design more flexible. We can choose arbitrary subarray structures for DOF enhancement purposes. Another advantage is that the relative position of two subarrays can be set as any integral multiple of half wavelength. This means that two subarrays can be located as far as possible so that the relative influence between two physical subarrays can be ignored. The DOFs of several typical generalized L-shaped nested arrays (GLNAs) are compared in this paper. By setting the subarrays as different types and the relative position as a special value, a special GLNA is presented. Simulations show that GLNAs have obvious superiority in 2D direction-of-arrival estimation.
ABSTRACT
In this paper, we propose a vectorized noncircular MUSIC (VNCM) algorithm based on the concept of the coarray, which can construct the difference and sum (diff-sum) coarray, for direction finding of the noncircular (NC) quasi-stationary sources. Utilizing both the NC property and the concept of the Khatri-Rao product, the proposed method can be applied to not only the ULA but also sparse arrays. In addition, we utilize the quasi-stationary characteristic instead of the spatial smoothing method to solve the coherent issue generated by the Khatri-Rao product operation so that the available degree of freedom (DOF) of the constructed virtual array will not be reduced by half. Compared with the traditional NC virtual array obtained in the NC MUSIC method, the diff-sum coarray achieves a higher number of DOFs as it comprises both the difference set and the sum set. Due to the complementarity between the difference set and the sum set for the coprime array, we choose the coprime array with multiperiod subarrays (CAMpS) as the array model and summarize the properties of the corresponding diff-sum coarray. Furthermore, we develop a diff-sum coprime array with multiperiod subarrays (DsCAMpS) whose diff-sum coarray has a higher DOF. Simulation results validate the effectiveness of the proposed method and the high DOF of the diff-sum coarray.
ABSTRACT
In this paper, an algorithm of direction finding is proposed in the presence of unknown mutual coupling. The preliminary direction of arrival (DOA) is estimated using the whole array for high resolution. Further refinement can then be conducted by estimating the angularly dependent coefficients (ADCs) with the subspace theory. The mutual coupling coefficients are finally determined by solving the least squares problem with all of the ADCs utilized without discarding any. Simulation results show that the proposed method can achieve better performance at a low signal-to-noise ratio (SNR) with a small-sized array and is more robust, compared with the similar processes employing the initial DOA estimation and further improvement iteratively.
ABSTRACT
Because of the complex nonlinear relationship between working conditions, the prediction of tribological properties has become a difficult problem in the field of tribology. In this study, we employed three distinct machine learning (ML) models, namely random forest regression (RFR), gradient boosting regression (GBR), and extreme gradient boosting (XGBoost), to predict the tribological properties of polytetrafluoroethylene (PTFE) composites under high-speed and high-temperature conditions. Firstly, PTFE composites were successfully prepared, and tribological properties under different temperature, speed, and load conditions were studied in order to explore wear mechanisms. Then, the investigation focused on establishing correlations between the friction and wear of PTFE composites by testing these parameters through the prediction of the friction coefficient and wear rate. Importantly, the correlation results illustrated that the friction coefficient and wear rate gradually decreased with the increase in speed, which was also proven by the correlation coefficient. In addition, the GBR model could effectively predict the tribological properties of the PTFE composites. Furthermore, an analysis of relative importance revealed that both load and speed exerted a greater influence on the prediction of the friction coefficient and wear rate.
ABSTRACT
The design of novel acceptor molecular structures based on classical building blocks is regarded as one of the efficient ways to explore the application of organic conjugated materials in conductivity and electronics. Here, a novel acceptor moiety, thiophene-vinyl-diketopyrrolopyrrole (TVDPP), was envisioned and prepared with a longer conjugation length and a more rigid structure than thiophene-diketopyrrolopyrrole (TDPP). The brominated TVDPP can be sequentially bonded to trimethyltin-containing benzo[c][1,2,5]thiadiazole units via Suzuki polycondensation to efficiently prepare the polymer PTVDPP-BSz, which features high molecular weight and excellent thermal stability. The polymerization process takes only 24 h and eliminates the need for chlorinated organic solvents or toxic tin-based reagents. Density functional theory (DFT) simulations and film morphology analyses verify the planarity and high crystallinity of the material, respectively, which facilitates the achievement of high carrier mobility. Conductivity measurements of the polymeric material in the organic transistor device show a hole mobility of 0.34 cm2 V-1 s-1, which illustrates its potential for functionalized semiconductor applications.
ABSTRACT
Iris color is a prominent phenotypic feature of quail. To understand the mechanism of melanin deposition related to quail iris color, iris tissues were selected from Beijing white and Chinese yellow quail for transcriptome analysis. Differentially expressed genes (DEGs) associated with pigmentation were identified using RNA sequencing and validated by quantitative real-time polymerase chain reaction (RT-qPCR). The identified single nucleotide polymorphisms were studied using bioinformatics and iris color correlation analyses. A total of 485 DEGs were obtained, with 223 upregulated and 262 downregulated. Gene ontology (GO) and Kyoto Encyclopedia of Genes and Genomes pathway enrichment analyses were performed. Thirty-two genes were annotated using the GO database. Three important pigment synthesis pathways (Notch signaling, melanogenesis, and tyrosine metabolism) were identified in quail iris tissue (P < 0.05). The expression levels of solute carrier family 45 member 2 (SLC45A2), tyrosinase-related protein 1, vitamin D receptor, opsin 5, and docking protein 5 were significantly different between Beijing white and Chinese yellow quail, as verified by RT-qPCR. The c.1061C>T mutation in SLC45A2, which caused a single amino acid change at position 354 (threonine to methionine), was significantly associated with iris color in Beijing white and Chinese yellow quail, and might be the main reason for the different iris colors between these two quail species.
ABSTRACT
A unitary transformation-based algorithm is proposed for two-dimensional (2-D) direction-of-arrival (DOA) estimation of coherent signals. The problem is solved by reorganizing the covariance matrix into a block Hankel one for decorrelation first and then reconstructing a new matrix to facilitate the unitary transformation. By multiplying unitary matrices, eigenvalue decomposition and singular value decomposition are both transformed into real-valued, so that the computational complexity can be reduced significantly. In addition, a fast and computationally attractive realization of the 2-D unitary transformation is given by making a Kronecker product of the 1-D matrices. Compared with the existing 2-D algorithms, our scheme is more efficient in computation and less restrictive on the array geometry. The processing of the received data matrix before unitary transformation combines the estimation of signal parameters via rotational invariance techniques (ESPRIT)-Like method and the forward-backward averaging, which can decorrelate the impinging signalsmore thoroughly. Simulation results and computational order analysis are presented to verify the validity and effectiveness of the proposed algorithm.
ABSTRACT
This review highlights selected examples, published in the last three to four years, of recent advance in the design, synthesis, properties, and device performance of quinoidal π-conjugated materials. A particular emphasis is placed on emerging materials, such as indophenine dyes that have the potential to enable high-performance devices. We specifically discuss the recent advances and design guidelines of π-conjugated quinoidal molecules from a chemical standpoint. To the best of the authors' knowledge, this review is the first compilation of literature on indophenine-based semiconducting materials covering their scope, limitations, and applications. In the first section, we briefly introduce some of the organic electronic devices that are the basic building blocks for certain applications involving organic semiconductors (OSCs). We introduce the definition of key performance parameters of three organic devices: organic field effect transistors (OFET), organic photovoltaics (OPV), and organic thermoelectric generators (TE). In section two, we review recent progress towards the synthesis of quinoidal semiconducting materials. Our focus will be on indophenine family that has never been reviewed. We discuss the relationship between structural properties and energy levels in this family of molecules. The last section reports the effect of structural modifications on the performance of devices: OFET, OPV and TE. In this review, we provide a general insight into the association between the molecular structure and electronic properties in quinoidal materials, encompassing both small molecules and polymers. We also believe that this review offers benefits to the organic electronics and photovoltaic communities, by shedding light on current trends in the synthesis and progression of promising novel building blocks. This can provide guidance for synthesizing new generations of quinoidal or diradical materials with tunable optoelectronic properties and more outstanding charge carrier mobility.
ABSTRACT
Organic polymer semiconductor materials are conveniently tuned to energy levels because of their good chemically modifiable properties, thus enhancing their carrier transport capabilities. Here, we have designed and prepared a polymer with a donor-acceptor structure and tested its potential as a p-type material for organic field-effect transistor (OFET) applications using a solution-processing method. The conjugated polymers, obtained via the polymerization of the two monomers relying on the Stille coupling reaction, possess extremely high molecular weights and thermodynamic stability. Theoretical-based calculations show that PDPP-2S-Se has superior planarity, which is favorable for carrier transport within the main chain. Photophysical and electrochemical measurements systematically investigated the properties of the material and the energy levels with respect to the theoretical values. The maximum hole mobility of the PDPP-2S-Se-based OFET device is 0.59 cm2 V-1 s-1, which makes it a useful material for potential organic electronics applications.
ABSTRACT
Organic polymer semiconductor materials, due to their good chemical modifiability, can be easily tuned by rational molecular structure design to modulate their material properties, which, in turn, affects the device performance. Here, we designed and synthesized a series of materials based on terpolymer structures and applied them to organic thin-film transistor (OTFT) device applications. The four polymers, obtained by polymerization of three monomers relying on the Stille coupling reaction, shared comparable molecular weights, with the main structural difference being the ratio of the thiazole component to the fluorinated thiophene (Tz/FS). The conjugated polymers exhibited similar energy levels and thermal stability; however, their photochemical and crystalline properties were distinctly different, leading to significantly varied mobility behavior. Materials with a Tz/FS ratio of 50:50 showed the highest electron mobility, up to 0.69 cm2 V-1 s-1. Our investigation reveals the fundamental relationship between the structure and properties of materials and provides a basis for the design of semiconductor materials with higher carrier mobility.
ABSTRACT
Many optoelectronic applications require organic semiconductor (OSC) materials with high electron affinity. In this work, a series of novel acceptor-donor-acceptor (A-D-A) materials with low-lying LUMO energy levels were designed and characterized. In this strategy, two acceptor dyes, bis-isatin and di-2-(2-oxindolin-3-ylidene) malononitrile, were connected by various π-bridges (benzene ring, benzo[c][1,2,5]thiadiazole, monothiophene, trithiophene). We varied the length of the π-conjugation of the central core and the linkage position of the acceptor core (4- vs. 6-position of the phenyl ring) to investigate the effect on the optical and electrochemical properties of the materials. We performed density functional theory (DFT) and time-dependent DFT (TD-DFT) studies to gain insight into the dyes' electronic properties by determining the energy levels. Our findings demonstrate that with increasing acceptor strength and π-conjugation length of the core, the wavelength of the longest absorption maximum as well as their respective extinction coefficients are enhanced, which results in band-gap reduction either by lowering the LUMO and/or raising the HOMO energy level of the molecules. The potential practical utility of these materials as electron-transport materials for perovskite solar cells (PSCs) has been demonstrated.