Novel transcriptional regulator OxtR1 regulates potential ferrodoxin in response to oxygen stress in Treponema denticola.

OBJECTIVE: Treponema denticola has been strongly implicated in the pathogenesis of chronic periodontitis. Previously, we reported that the potential transcriptional regulator TDE_0259 (oxtR1) is upregulated in the bacteriocin ABC transporter gene-deficient mutant. OxtR1 may regulate genes to adapt to environmental conditions during colonization; however, the exact role of the gene in T. denticola has not been reported. Therefore, we investigated its function using an oxtR1-deficient mutant. METHODS: The growth rates of the wild-type and oxtR1 mutant were monitored under anaerobic conditions; their antibacterial agent susceptibility and gene expression were assessed using a liquid dilution assay and DNA microarray, respectively. An electrophoretic mobility shift assay was performed to investigate the binding of OxtR1 to promoter regions. RESULTS: The growth rate of the bacterium was accelerated by the inactivation of oxtR1, and the mutant exhibited an increased minimum inhibitory concentration against ofloxacin. We observed a relative increase in the expression of genes associated with potential ferrodoxin (TDE_0260), flavodoxin, ABC transporters, heat-shock proteins, DNA helicase, iron compounds, and lipoproteins in the mutant. OxtR1 expression increased upon oxygen exposure, and oxtR1 complementation suppressed the expression of potential ferrodoxin. Our findings also suggested that OxtR1 binds to a potential promoter region of the TDE_0259-260 operon. Moreover, the mutant showed a marginal yet significantly faster growth rate than the wild-type strain under H2O2 exposure. CONCLUSION: The oxygen-sensing regulator OxtR1 plays a role in regulating the expression of a potential ferrodoxin, which may contribute to the response of T. denticola to oxygen-induced stress.

The effect of scanning pathways on trueness and precision in full-arch optical impression.

BACKGROUND: In this study, we investigated the effects of differences in scanning pathways during optical impression on the trueness and precision of full-arch impressions. METHODS: Reference data were obtained using a laboratory scanner. All optical impressions were measured across the dental arch using TRIOS® 3 in four different pathways. The reference and optical impression data were superimposed using the best-fit method. The criteria for superimposition were based on the starting side of the dental arch (partial arch best-fit method, PB) and based on the full arch (full arch best-fit method, FB). The data were compared between the left and right molars (starting and ending sides). The scan deviations for trueness (n = 5) and precision (n = 10) were obtained for each group by calculating the root mean square (RMS) of the deviation at each measurement point. Visual observations using superimposed color map images revealed variations in trueness. RESULTS: There were no significant differences in scanning time or amount of scan data between the four scanning pathways. Trueness did not differ significantly among the four pathways with respect to the starting and ending sides, regardless of the superimposition criteria. Precision with PB was significantly different between scanning pathways A and B, and pathways B and C for the starting sides, and between scanning pathways A and B, and pathways A and D for the ending sides. In contrast, there was no significant difference between the starting and ending side in pathways for FB. Regarding PB, color map images showed a large error range in the direction toward the molar radius for the occlusal surface and cervical regions on the ending sides. CONCLUSION: Differences in the scanning pathways did not affect trueness, regardless of the superimposition criteria. On the other hand, differences in the scanning pathways affected the precision of the starting and ending sides with PB. Scanning pathways B and D were more precise on the starting and ending sides, respectively.

Analytic Map of Three-Channel S Matrix: Generalized Uniformization and Mittag-Leffler Expansion.

We explore the analytic structure of the three-channel S matrix by generalizing uniformization and making a single-valued map for the three-channel S matrix. First, by means of the inverse Jacobi's elliptic function we construct a transformation from eight Riemann sheets of the center-of-mass energy complex plane onto a torus, on which the three-channel S matrix is represented single-valued. Second, we show that the Mittag-Leffler expansion, a pole expansion, of the three-channel scattering amplitude includes not only topologically trivial but also nontrivial contributions and is given by the Weierstrass zeta function. Finally, taking a simple nonrelativistic effective field theory with contact interaction for the S=-2, I=0, J^{P}=0^{+}, ΛΛ-NΞ-ΣΣ coupled-channel scattering, we demonstrate that as a function of the uniformization variable the scattering amplitude is, in fact, given by the Mittag-Leffler expansion and is dominated by contributions from neighboring poles.

Prevalence and Clinical Characteristics of Proximal Deep Venous Thrombosis After a High-Density Coronavirus Disease 2019 Cluster in a Japanese Psychiatric Hospital.

BACKGROUND: The prevalence of deep venous thrombosis (DVT) among hospitalized psychiatric patients after coronavirus disease 2019 (COVID-19) infection remains unclear.Methods and Results:We retrospectively investigated the prevalence of proximal DVT after COVID-19 infection among 50 hospitalized patients in a Japanese psychiatric hospital that in which a COVID-19 cluster developed between August and September 2020. The prevalence of proximal DVT was 10.0%. Patients with proximal DVT had a lower body weight and higher maximum D-dimer levels and International Medical Prevention Registry on Venous Thromboembolism (IMPROVE) VTE scores. CONCLUSIONS: After COVID-19 infection, hospitalized psychiatric patients are at high risk of DVT and should be carefully followed up.

Prognostic Impact of Peak Aortic Jet Velocity on Patients With Acute Myocardial Infarction.

BACKGROUND: Aortic valve stenosis (AS) leads to increased cardiovascular mortality and morbidity, and recent studies reported that even mild-to-moderate AS was associated with poor prognosis in the general population. This study investigated the prognostic impact of mild or moderate AS, defined as 2.0 m/s ≤ peak aortic jet velocity (Vmax) ≤3.9 m/s using echocardiography in acute myocardial infarction (AMI) patients.Methods and Results: This study enrolled 3,049 AMI patients using data from the Mie ACS registry. Patients were divided into 2 groups according to Vmax: Group 1: Vmax <2.0 m/s and/or visually intact aortic valve in which all 3 leaflets are fully and evenly open; Group 2: 2.0 m/s ≤ Vmax ≤ 3.9 m/s. There were 2,976 patients in Group 1and 73 patients in Group 2. The Group 2 patients were older, had a higher percentage of males and had lower body mass index and Killip ≥2 than the Group 1 patients. Angiographic data, door-to-balloon time, and mechanical support were not different between the 2 groups. The Group 2 patients demonstrated a significantly higher all-cause mortality rate (P<0.01) and composite of cardiovascular death and heart failure hospitalization (P<0.01), and Kaplan-Meier analysis showed the same tendency in propensity score-matched patients. CONCLUSIONS: The present study revealed that mild or moderate AS based on Vmax is associated with poor prognosis following AMI.

Effects of Cuspal Inclination and Luting Agent on Fracture Load Values in Composite Resin CAD/CAM Crowns.

The purpose of this study was to evaluate whether change in cuspal inclination influences the fracture load values of composite resin computer-aided design/computer-aided manufacturing (CAD/CAM) crowns. Abutment teeth and CAD/CAM crowns were prepared as they would be for treating a mandibular first premolar with two cusps. The CAD/CAM crowns were designed so that 1) the principal stress lines would be radially distributed from the two points of contact with the indenter to the occlusal area of the abutment (Type I), or 2) the principal stress lines would pass outside the occlusal area of the abutment (Types II and III). The CAD/CAM crowns were mounted on the abutments using one of two types of resin or polycarboxylate cement. Fracture load values were measured using a universal tester. The Type I CAD/CAM crowns exhibited the highest mean fracture load value, followed by the Type II crowns and then the Type III crowns, with significant differences seen between all types (p<0.05). The luting agent used (resin or polycarboxylate cement) showed no effect on the fracture load value. With the Type II and Type III crowns, significant differences in the fracture load value were observed between the Super-Bond and Hy-Bond polycarboxylate cement groups (p<0.05).

Patient with Poor Esthetic Anterior Tooth Position Treated with Lithium Disilicate Mesial Cantilever Single-retainer Fixed Partial Denture: A Case Report.

We report a case of fixed prosthetic treatment for poor esthetics due to the position of the maxillary left lateral incisor in a 43-year-old woman. Initial examination revealed no carious lesions, but the tooth axis of the maxillary right canine showed mesial inclination of approximately 15°. Orthodontic treatment was first proposed but was declined by the patient as they did not wish to undergo a prolonged period of therapy. Therefore, recovery by extraction of the maxillary right lateral incisor and prosthetic treatment was proposed as an alternative. The method to be used for application of a 3-unit fixed partial denture and implant treatment was explained to the patient. She refused to give consent to this plan as well, however, due to concerns regarding the need to cut a lot from a non-problematic tooth and the length of time such treatment would require. Therefore, the problem was finally treated by application of a cantilever single-retainer fixed partial denture while giving sufficient consideration to extraction and occlusal contact. Lithium disilicate was used for the material of the prothesis. At 1 year after completion of treatment, no problem was observed with either the prosthetic appliance or the abutment teeth.

Influence of Tooth Mold Materials in Composite Resin CAD/CAM Crown Destructive Test.

A range of experimental designs have been used in destructive testing of composite resin CAD/CAM crowns. Various materials have been adopted for the abutment in such tests, including human or bovine dentin, stainless steel, PMMA, and composite resin, the selection of which is made in accordance with study objective or preference of the researcher. The purpose of this study was to determine how the material selected for the abutment material affected fracture load and maximum displacement. Destructive tests were conducted on composite resin crowns of the same design. Three types of material were used for the abutments together with 2 types of adhesive material. Images of each sample were acquired before destruction using a microfocus X-ray CT scanner to confirm the feasibility of a non-destructive test.The load required to fracture the composite CAD/CAM resin crowns depended on the abutment material used, with a decrease being observed in the order of composite resin, stainless steel, and PMMA. Maximum displacement decreased in the order of PMMA, composite resin, and stainless steel. Differences in the material used for setting (adhesive resin or polycarboxylate cement) showed no effect on fracture load. These results indicate that the load required to achieve destruction of resin CAD/CAM crowns varies according to the abutment material used.

Implant and Prosthetic Treatment in Esthetic Zone with Alveolar Ridge Preservation and Autotransplantation: Clinical Case Report with 16-year Follow-up.

Occlusal reconstruction comprising orthodontic treatment, autotransplantation, and implant treatment was performed in a 30-year-old woman with missing maxillary anterior teeth. An initial examination revealed marked root resorption of the maxillary anterior teeth. Both the maxillary canines were missing, causing constriction of the dental arch. Conserving the right maxillary central and lateral incisors, which were dislocated due to trauma, was considered to be too difficult, and a bridge was not selected as there was insufficient load bearing capacity in the adjacent abutment teeth, making the prognosis uncertain. Partial dentures were rejected due to the patient's age and esthetic demands. First, the right mandibular lateral incisor was extracted to relieve crowding in the mandibular anterior teeth, leaving the patient with 3 mandibular incisors. Orthodontic treatment was then performed to harmonize the occlusal relationship between the mandibular and maxillary anterior teeth. Next, the right mandibular lateral incisor was transplanted to the extraction site of the right maxillary lateral incisor. After fixation of the autotransplanted tooth, the shape of the bone around the implant site improved. The final prosthesis for the right maxillary central incisor was provided via implant treatment. As seen in a follow-up 16 years later, the interproximal dental papilla was intact, and the patient's esthetic demands were fulfilled. Utilizing the functions of the periodontal ligament of the natural teeth was a useful part of orthodontic treatment and autotransplantation.

Plaque-removing Effects of Interdental Instruments in Molar Region.

Many types of interdental instrument, such as dental floss and interdental brushes, can be purchased easily and sell in large numbers. Many studies have compared the effects of such instruments. Few studies have investigated their relationship with regions of residual plaque, however. The purpose of this study was to compare rates of plaque removal from the mesial and distal surfaces of the bilateral maxillary and mandibular premolars and molars among 3 types of interdental instrument: finger-winding-dental floss, holder-type dental floss, and an interdental brush. Prior to the experiment, the artificial teeth in a jaw model were removed for application of artificial plaque. The teeth were then replaced and the model attached to a phantom. An operator brushed the teeth in a posture close to that adopted in actual tooth brushing with each type of instrument, after which the plaque removal rate was compared among them. The rate of plaque removal using finger-winding floss was the highest, although this type of instrument is less easy to hold than the others. The rate with a handle-equipped interdental instrument showed a decrease in some regions, although it is easy to hold. The results of this study suggest that the type of interdental instrument used should differ depending on the region to be cleaned.

Unicystic Ameloblastoma in a Child Treated with a Combination of Conservative Surgery and Orthodontic Treatment: A Case Report.

Unicystic ameloblastoma (UAM) is a variant of intraosseous ameloblastoma that occurs as a single cystic cavity. This report describes a case of UAM of the mandible in a seven-year-old girl. The lesion radiographically mimicked a dentigerous cyst. Under the primary diagnosis of a dentigerous cyst, marsupialization was performed to erupt the first molar involved in the cystic lesion and to obtain a definitive diagnosis. The biopsy specimen revealed ameloblastoma. During careful observation, orthodontic treatment, which was performed to upright and promote the eruption of the first molar involved in the tumor, maintained the space needed for enucleation of the tumor. Finally, the second primary molar was extracted, and the lesion was enucleated at 3 years and 4 months after marsupialization. The results of the histological examination revealed UAM. Conclusively, the treatment course not only avoids a resection of the mandible but also induces eruption of the teeth involved in the tumor. Thus, the combination of conservative surgery and orthodontic treatment was effective in the management of UAM that mimics a dentigerous cyst.

Effect of Differences in Axial Thickness and Type of Cement on Fracture Resistance in Composite Resin CAD/CAM Crowns.

The purpose of this study was to investigate the influence of differences in axial thickness and type of cement on fracture load in CAD/CAM crowns. Assuming the mandibular first premolar to be the abutment tooth, 4 types of crown with different axial thicknesses and radii of curvature were prepared. To unify external design, the morphology of the crown margins was set at 0.15, 0.30, 0.45, or 0.60 mm, thus maintaining uniform axial form of the crowns. The CAD/CAM crowns and abutment teeth were bonded using each of 2 types of resin cement or polycarboxylate cement. The fracture load value was measured using a universal testing machine and the destruction phase observed.No significant difference was observed with change in axial thickness. The fracture load values with each of the 2 types of resin cement used were significantly higher than that with polycarboxylate cement (p<0.01). These results suggest that the fracture load values of CAD/CAM crowns are not influenced by differences in the axial thickness of the crown, and that they are higher when bonding is achieved with resin rather than polycarboxylate cement.

The clinical impact of edoxaban for the patients with postoperative anemia after total hip arthroplasty.

BACKGROUND: Postoperative anemia is a common complication after total hip arthroplasty (THA). However, the effect of edoxaban on postoperative anemia after THA remains unclear. Here, we retrospectively evaluated the clinical assessment of postoperative anemia and the associated changes of coagulation parameters in patients undergoing thromboprophylaxis with edoxaban compared with fondaparinux as a conventional anticoagulant thromboprophylactic agent after THA. METHODS: One hundred and forty-nine patients who underwent THA from July 2010 to June 2012 were divided into two groups, according to whether they were operated on before or after the approval of edoxaban: the fondaparinux group (Group F: 86 patients) and the edoxaban group (Group E: 63 patients). The frequency of postoperative anemia and blood coagulation values were investigated. RESULTS: Postoperative anemia developed more frequently in Group E than in Group F after surgery. However, the degree of postoperative anemia showed no significant difference between the groups. Meanwhile, prothrombin time (PT), prothrombin time-international normalized ratio (PT-INR), and activated partial thromboplastin time were markedly higher in patients with edoxaban-associated postoperative anemia, which showed an increased potential to predict the occurrence of postoperative anemia. Additionally, both PT and PT-INR in Group E were also correlated with the volume of estimated blood loss. CONCLUSION: The frequency of postoperative anemia was increased in patients treated with edoxaban, compared to fondaparinux, after THA. Edoxaban thromboprophylaxis might, therefore, require more careful monitoring to prevent postoperative anemia. Additionally, particular prolongation of PT and PT-INR induced by edoxaban treatment might predict postoperative anemia.

Identification of Heschl's gyrus on phase difference enhanced imaging.

Background The white matter in the Heschl's gyrus (HG-WM) may appear differently to the other gyri on phase difference enhanced imaging (PADRE), which can enhance the myelin density. Purpose To evaluate the signal intensity (SI) of HG-WM using the PADRE technique and to compare the images with susceptibility-weighted imaging (SWI)-like images. Material and Methods The participants included 19 normal controls (38 HGs; mean age, 60.1 years; age range, 28-80 years). Coronal PADRE and SWI-like images were acquired using a 3T magnetic resonance (MR) system. The SI of the HG-WM was classified into three grades based on a comparison with the SI of the superior temporal gyrus: Grade 1, isointense; Grade 2, slightly hypointense, and Grade 3, markedly hypointense. Results In the assessment of the SI of the HG-WM, the HG-WM appeared hypointense in all 38 sites of the 19 participants; the hypointensity corresponded to Grade 2 in 13 (34%) images and Grade 3 in 25 (66%) images. On the other hand, the HG-WM was classified as Grade 1 (isointense) in all of the SWI-like images. Conclusion The HG-WM appears hypointense on PADRE, which probably reflects the higher myelin content. PADRE may be useful for identifying the HG through the assessment of the SI of the HG-WM.

Total hip arthroplasty after failed treatment of proximal femur fracture.

INTRODUCTION: Total hip arthroplasty (THA) is a good option as a salvage procedure after failed treatment of proximal femur fracture. The anatomy of the proximal femur, however, makes this surgery complicated and challenging. The purpose of this study was to evaluate the radiographic and clinical outcomes of THA after failed treatment of proximal femur fractures. MATERIALS AND METHODS: We retrospectively analysed 50 consecutive THAs (42 women, 8 men; mean age 77 years) after failed treatment of a proximal femur fracture. Mean postoperative follow-up was 58.1 months. Preoperative diagnoses were femoral neck fracture in 18 hips and trochanteric fracture in 32 hips, including three that were infected. Failure resulted from cutout in 22 cases, osteonecrosis in 12, non-union with failed fixation in nine, postoperative osteoarthritis in four, and infection in three. Factors compared included radiographic assessment, complication rate, visual analogue scale (VAS), and Harris Hip Scores (HHS). Radiographic variables included femoral neck anteversion and cup and stem alignment. RESULTS: Absolute values of the differences in femoral neck anteversion between the affected and healthy sides were 6.0° in the femoral neck fracture group and 19.2° in the trochanteric fracture group (p = 0.01). There were no significant differences in cup anteversion (p = 0.20) or stem anteversion (p = 0.08). The complication rate was significantly higher in the trochanteric fracture group than in the femoral neck fracture group (25 vs 0%, p < 0.0001). Postoperative complications in the trochanteric fracture group included three periprosthetic fractures (9.4%), two dislocations (6.3%), two surgical-site infections (6.3%), and one stem penetration (3.1%). Although no significant differences between groups were seen in the VAS or HHS at final follow-up (p = 0.32, 0.09, respectively), these measures were significantly improved at final follow-up in both groups (p < 0.0001 for both). CONCLUSIONS: Performing THA after failed treatment of trochanteric fractures requires consideration of complication risk and incorrect femoral neck anteversion.

Status of Clinical Training at Tokyo Dental College and Subsequent Career Pathway - Focusing on Training Facilities and Programs.

The goal of the present study was to clarify the status of training in clinical dentistry at training facilities belonging to Tokyo Dental College by investigating trainee quota fill rates and analyzing the relationship between selection of training program and subsequent career pathway. The trainees were divided into 4 groups based on career pathway after training: those entering graduate school; those becoming residents; those remaining at the college or hospital to take specialized clinical courses or for other purposes; and those starting work outside the college. The trainee quota fill rate was highest at the Suidobashi Hospital, followed by the Ichikawa General and Chiba Hospitals. A total of 8 training programs have been implemented at these facilities (Chiba: A, B, C, and D; Suidobashi, A, B, and C; and Ichikawa, A). A comparison among training programs revealed that the fill rate exceeded 60% in all cases, except for Chiba D, where it was markedly lower, at 25%. Career pathway after training significantly varied between training facilities. Among trainees selecting the Chiba Hospital, the highest proportion was occupied by those starting work outside the college. The proportion of those entering graduate school was also high in this group. Similarly, among trainees selecting the Suidobashi Hospital, the highest proportion was occupied by those starting work outside the college. The proportion of those entering graduate school was low in this group, however. Among trainees selecting the Ichikawa General Hospital, the proportions of those entering graduate school and those becoming residents were particularly high, while the proportion of those starting work outside the college was low. A comparison of career pathways revealed a significant difference only between Chiba Programs B and C. In conclusion, training facility showed a markedly stronger influence on career pathway than training program.

Zebra sign of precentral gyri in amyotrophic lateral sclerosis: A novel finding using phase difference enhanced (PADRE) imaging-initial results.

OBJECTIVE: We compared the precentral gyri (PG) on the PADRE of patients with amyotrophic lateral sclerosis (ALS) and healthy subjects (HSs) in order to determine whether it is possible to discriminate between ALS patients and HSs on an individual basis. METHODS: First, two radiologists reviewed the appearance of the normal PG and that of ALS patients on PADRE in a non-blinded manner, and deviations from the appearance of the normal PG were recorded. Next, based on the presence of PG abnormalities on PADRE, we performed an observer performance study using 16 ALS patients and 16 HSs. RESULTS: The radiologists were able to consensually define the PG as abnormal on PADRE when a low-signal-intensity layer was observed in the gray matter of the PG; a three- or four-layer organization (zebra sign) was characterized by the low-signal-intensity layer. The observer performance study demonstrated that the sensitivity, specificity, and accuracy of PG abnormalities on PADRE for discriminating ALS patients from HSs were 94 %, 94 %, and 94 %, respectively, for reviewers 1 and 2. CONCLUSIONS: It was possible to discriminate between ALS patients and HSs based on the presence of PG abnormalities on PADRE, which may reflect upper motor neuron impairment in ALS. KEY POINTS: • PADRE reveals low-signal-intensity layer in the PG of ALS • By PADRE findings on PG, we can discriminate ALS from HSs • PADRE may be a useful method for detecting UMN impairment in ALS.

Quantitative susceptibility mapping in patients with systemic lupus erythematosus: detection of abnormalities in normal-appearing basal ganglia.

OBJECTIVES: To evaluate whether quantitative susceptibility mapping (QSM) can be employed to detect abnormalities within normal-appearing basal ganglia on conventional MRI in patients with neuropsychiatric systemic lupus erythematosus (NPSLE). METHODS: For 33 SLE patients (13 NPSLE and 20 non-NPSLE patients) and 23 age/sex-matched controls, two radiologists independently measured the mean QSM and R2* values in various brain structures that appeared to be normal on conventional MR images. These values in each brain structure were compared among the two SLE groups and controls. RESULTS: Regarding the putamen, the NPSLE patients showed significantly higher QSM values than the non-NPSLE patients and controls (p < 0.05). For the lateral globus pallidus, both SLE groups showed significantly higher QSM values than the controls (p < 0.05). The R2* values were not significantly different between both SLE groups. The NPSLE patients showed a significant correlation between the mean QSM values in putamen and the disease duration (r = 0.63, p < 0.05). For the interobserver agreement, the QSM value was superior to the R2* value (0.690 vs. 0.446, Kendall W value). CONCLUSIONS: QSM can be used to identify increased susceptibility of the basal ganglia appearing to be normal on conventional MR images in NPSLE patients. KEY POINTS: • QSM values in the putamen are significantly higher in NPSLE than non-NPSLE. • NPSLE patients show correlation between QSM values in the putamen and disease duration. • QSM is more sensitive than R2* mapping for detecting subtle changes.

The male mouse pheromone ESP1 enhances female sexual receptive behaviour through a specific vomeronasal receptor.

Various social behaviours in mice are regulated by chemical signals called pheromones that act through the vomeronasal system. Exocrine gland-secreting peptide 1 (ESP1) is a 7-kDa peptide that is released into male tear fluids and stimulates vomeronasal sensory neurons in female mice. Here, we describe the molecular and neural mechanisms that are involved in the decoding of ESP1 signals in the vomeronasal system, which leads to behavioural output in female mice. ESP1 is recognized by a specific vomeronasal receptor, V2Rp5, and the ligand-receptor interaction results in sex-specific signal transmission to the amygdaloid and hypothalamic nuclei via the accessory olfactory bulb. Consequently, ESP1 enhances female sexual receptive behaviour upon male mounting (lordosis), allowing successful copulation. In V2Rp5-deficient mice, ESP1 induces neither neural activation nor sexual behaviour. These findings show that ESP1 is a crucial male pheromone that regulates female reproductive behaviour through a specific receptor in the mouse vomeronasal system.

Clinical Assessment of Postoperative Anemia Associated with Edoxaban in Patients Undergoing Total Knee Arthroplasty Compared to Fondaparinux.

Edoxaban, an oral direct factor Xa inhibitor, was developed and approved for anticoagulant thromboprophylaxis after total knee arthroplasty (TKA). We retrospectively investigated the postoperative anemia by oral administration of edoxaban 30 mg compared with fondaparinux 2.5 mg in TKA patients. Two hundred twenty nine patients who underwent TKA in National Hospital Organization Okayama Medical Center from July 2010 to June 2012 were divided into two groups; pre and post approval of edoxaban: fondaparinux-group (F-group) and edoxaban-group (E-group). As the primary endpoint, the frequency of postoperative anemia was evaluated. Blood coagulation values and relations between these parameters and postoperative anemia were also investigated. The frequency of postoperative anemia was significantly higher in E-group than F-group patients (52.7% vs. 37.8%; p<0.05). Hemoglobin (Hgb) levels were decreased with the peak at postoperative day (POD) 3 in both groups, and the change of Hgb values from POD1 (ΔHgb) was significantly increased in the E-group (p=0.04). At each POD, prothrombin time (PT) and international normalized ratio of PT (PT-INR) prolonged from the preoperative day in E-group were significantly higher than F-group. Additionally, PT and PT-INR in the E-group at POD3 were significantly prolonged in patients with postoperative anemia and the sensitivity of cut-off values to predict postoperative anemia was superior to the activated partial thromboplastin time (APTT). Thus, as the frequency of postoperative anemia tended to be higher in E-group, edoxaban 30 mg might require vigilance, and prolonged PT and PT-INR could potentially predict edoxaban-associated postoperative anemia after TKA.