ABSTRACT
There are important questions surrounding the potential contribution of outdoor and indoor air quality in the transmission of SARS-CoV-2 and perpetuation of COVID-19 epidemic waves. Environmental health may be a critical component of COVID-19 prevention. The public health community and health agencies should consider the evolving evidence in their recommendations and statements, and work to issue occupational guidelines. Evidence coming from the current epidemiological and experimental research is expected to add knowledge about virus diffusion, COVID-19 severity in most polluted areas, inter-personal distance requirements and need for wearing face masks in indoor or outdoor environments. The COVID-19 pandemic has highlighted the need for maintaining particulate matter concentrations at low levels for multiple health-related reasons, which may also include the spread of SARS-CoV-2. Indoor environments represent even a more crucial challenge to cope with, as it is easier for the SARS-COV2 to spread, remain vital and infect other subjects in closed spaces in the presence of already infected asymptomatic or mildly symptomatic people. The potential merits of preventive measures, such as CO2 monitoring associated with natural or controlled mechanical ventilation and air purification, for schools, indoor public places (restaurants, offices, hotels, museums, theatres/cinemas etc.) and transportations need to be carefully considered. Hospital settings and nursing/retirement homes as well as emergency rooms, infectious diseases divisions and ambulances represent higher risk indoor environments and may require additional monitoring and specific decontamination strategies based on mechanical ventilation or air purification.
Subject(s)
Air Pollution, Indoor , COVID-19 , COVID-19/epidemiology , COVID-19/prevention & control , Humans , Pandemics/prevention & control , Particulate Matter , RNA, Viral , SARS-CoV-2ABSTRACT
BACKGROUND: The burden of COVID-19 was extremely severe in Northern Italy, an area characterized by high concentrations of particulate matter (PM), which is known to negatively affect human health. Consistently with evidence already available for other viruses, we initially hypothesized the possibility of SARS-CoV-2 presence on PM, and we performed a first experiment specifically aimed at confirming or excluding this research hyphotesys. METHODS: We have collected 34 PM10 samples in Bergamo area (the epicenter of the Italian COVID-19 epidemic) by using two air samplers over a continuous 3-weeks period. Filters were properly stored and underwent RNA extraction and amplification according to WHO protocols in two parallel blind analyses performed by two different authorized laboratories. Up to three highly specific molecular marker genes (E, N, and RdRP) were used to test the presence of SARS-CoV-2 RNA on particulate matter. RESULTS: The first test showed positive results for gene E in 15 out of 16 samples, simultaneously displaying positivity also for RdRP gene in 4 samples. The second blind test got 5 additional positive results for at least one of the three marker genes. Overall, we tested 34 RNA extractions for the E, N and RdRP genes, reporting 20 positive results for at least one of the three marker genes, with positivity separately confirmed for all the three markers. Control tests to exclude false positivities were successfully accomplished. CONCLUSION: This is the first evidence that SARS-CoV-2 RNA can be present on PM, thus suggesting a possible use as indicator of epidemic recurrence.
Subject(s)
Betacoronavirus , Coronavirus Infections , Pandemics , Pneumonia, Viral , Betacoronavirus/genetics , COVID-19 , Humans , Italy , Particulate Matter , RNA, Viral/genetics , SARS-CoV-2ABSTRACT
Diversifying energy sources and managing waste biomass are two pressing contemporary issues. The new technology proposed in this study aims to address both by converting waste biomass into energy and fertilizer through the use of a biofuel cell (BFC). The purpose of this study is to assess the environmental impacts associated with this innovative technology through a Life Cycle Assessment (LCA). To achieve the goal, the production and use of the cell were modelled, considering both laboratory-scale operations and industrial-scale approximations. The study explored alternative scenarios, such as sensitivity analyses involving different acids and bases, renewable energy sources, and heat recovery. Comparisons with conventional biomass waste treatments (anaerobic digestion and composting) demonstrated that the BFC technology remains competitive. To further improve the BFC's environmental footprint, efforts should focus on reducing energy requirements and enhancing nutrient recovery during scale-up. These insights are crucial for advancing sustainable waste treatment technologies and maximizing the potential of discarded biomass in an environmentally friendly manner.
ABSTRACT
A number of nations were forced to declare a total shutdown due to COVID-19 infection, as extreme measure to cope with dramatic impact of the pandemic, with remarkable consequences both in terms of negative health outcomes and economic loses. However, in many countries a "Phase-2" is approaching and many activities will re-open soon, although with some differences depending on the severity of the outbreak experienced and SARS-COV-2 estimated diffusion in the general population. At the present, possible relapses of the epidemic cannot be excluded until effective vaccines or immunoprophylaxis with human recombinant antibodies will be properly set up and commercialized. COVD-19-related quarantines have triggered serious social challenges, so that decision makers are concerned about the risk of wasting all the sacrifices imposed to the people in these months of quarantine. The availability of possible early predictive indicators of future epidemic relapses would be very useful for public health purposes, and could potentially prevent the suspension of entire national economic systems. On 16 March, a Position Paper launched by the Italian Society of Environmental Medicine (SIMA) hypothesized for the first time a possible link between the dramatic impact of COVID-19 outbreak in Northern Italy and the high concentrations of particulate matter (PM10 and PM2.5) that characterize this area, along with its well-known specific climatic conditions. Thereafter, a survey carried out in the U.S. by the Harvard School of Public Health suggested a strong association between increases in particulate matter concentration and mortality rates due to COVID-19. The presence of SARS-COV-2 RNA on the particulate matter of Bergamo, which is not far from Milan and represents the epicenter of the Italian epidemic, seems to confirm (at least in case of atmospheric stability and high PM concentrations, as it usually occurs in Northern Italy) that the virus can create clusters with the particles and be carried and detected on PM10. Although no assumptions can be made concerning the link between this first experimental finding and COVID-19 outbreak progression or severity, the presence of SARS-COV-2 RNA on PM10 of outdoor air samples in any city of the world could represent a potential early indicator of COVID-19 diffusion. Searching for the viral genome on particulate matter could therefore be explored among the possible strategies for adopting all the necessary preventive measures before future epidemics start.
Subject(s)
Coronavirus Infections/epidemiology , Coronavirus , Pandemics , Particulate Matter , Pneumonia, Viral/epidemiology , Aerosols , Betacoronavirus , COVID-19 , Disease Outbreaks , Humans , Italy/epidemiology , Public Health , Quarantine , Recurrence , SARS-CoV-2ABSTRACT
The COVID-19 pandemic caused the shutdown of entire nations all over the world. In addition to mobility restrictions of people, the World Health Organization and the Governments have prescribed maintaining an inter-personal distance of 1.5 or 2 m (about 6 feet) from each other in order to minimize the risk of contagion through the droplets that we usually disseminate around us from nose and mouth. However, recently published studies support the hypothesis of virus transmission over a distance of 2 m from an infected person. Researchers have proved the higher aerosol and surface stability of SARS-COV-2 as compared with SARS-COV-1 (with the virus remaining viable and infectious in aerosol for hours) and that airborne transmission of SARS-CoV can occur besides close-distance contacts. Indeed, there is reasonable evidence about the possibility of SARS-COV-2 airborne transmission due to its persistence into aerosol droplets in a viable and infectious form. Based on the available knowledge and epidemiological observations, it is plausible that small particles containing the virus may diffuse in indoor environments covering distances up to 10 m from the emission sources, thus representing a kind of aerosol transmission. On-field studies carried out inside Wuhan Hospitals showed the presence of SARS-COV-2 RNA in air samples collected in the hospitals and also in the surroundings, leading to the conclusion that the airborne route has to be considered an important pathway for viral diffusion. Similar findings are reported in analyses concerning air samples collected at the Nebraska University Hospital. On March 16th, we have released a Position Paper emphasizing the airborne route as a possible additional factor for interpreting the anomalous COVID-19 outbreaks in northern Italy, ranked as one of the most polluted areas in Europe and characterized by high particulate matter (PM) concentrations. The available information on the SARS-COV-2 spreading supports the hypothesis of airborne diffusion of infected droplets from person to person at a distance greater than two meters (6 feet). The inter-personal distance of 2 m can be reasonably considered as an effective protection only if everybody wears face masks in daily life activities.
Subject(s)
Severe acute respiratory syndrome-related coronavirus , Aerosols , Betacoronavirus , COVID-19 , Coronavirus Infections , Europe , Italy , Nebraska , Pandemics , Pneumonia, Viral , SARS-CoV-2ABSTRACT
OBJECTIVES: A number of studies have shown that the airborne transmission route could spread some viruses over a distance of 2 meters from an infected person. An epidemic model based only on respiratory droplets and close contact could not fully explain the regional differences in the spread of COVID-19 in Italy. On March 16th 2020, we presented a position paper proposing a research hypothesis concerning the association between higher mortality rates due to COVID-19 observed in Northern Italy and average concentrations of PM10 exceeding a daily limit of 50 µg/m3. METHODS: To monitor the spreading of COVID-19 in Italy from February 24th to March 13th (the date of the Italian lockdown), official daily data for PM10 levels were collected from all Italian provinces between February 9th and February 29th, taking into account the maximum lag period (14 days) between the infection and diagnosis. In addition to the number of exceedances of the daily limit value of PM10, we also considered population data and daily travelling information for each province. RESULTS: Exceedance of the daily limit value of PM10 appears to be a significant predictor of infection in univariate analyses (p<0.001). Less polluted provinces had a median of 0.03 infections over 1000 residents, while the most polluted provinces showed a median of 0.26 cases. Thirty-nine out of 41 Northern Italian provinces resulted in the category with the highest PM10 levels, while 62 out of 66 Southern provinces presented low PM10 concentrations (p<0.001). In Milan, the average growth rate before the lockdown was significantly higher than in Rome (0.34 vs 0.27 per day, with a doubling time of 2.0 days vs 2.6, respectively), thus suggesting a basic reproductive number R0>6.0, comparable with the highest values estimated for China. CONCLUSION: A significant association has been found between the geographical distribution of daily PM10 exceedances and the initial spreading of COVID-19 in the 110 Italian provinces.
Subject(s)
Air Pollution , Betacoronavirus/isolation & purification , Coronavirus Infections , Disease Transmission, Infectious , Pandemics , Particulate Matter/analysis , Pneumonia, Viral , Air Pollution/analysis , Air Pollution/statistics & numerical data , COVID-19 , Coronavirus Infections/epidemiology , Coronavirus Infections/prevention & control , Coronavirus Infections/transmission , Correlation of Data , Disease Transmission, Infectious/prevention & control , Disease Transmission, Infectious/statistics & numerical data , Humans , Italy/epidemiology , Outcome Assessment, Health Care , Pandemics/prevention & control , Pneumonia, Viral/epidemiology , Pneumonia, Viral/prevention & control , Pneumonia, Viral/transmission , Public Health/methods , Public Health/statistics & numerical data , Risk Assessment/methods , SARS-CoV-2ABSTRACT
A method of liquid chromatography coupled with tandem mass spectrometry was developed and validated for the determination of free soluble phenolic compounds in eight ancient varieties of wheat ( Triticum sp. pl.): Autonomia, Gentil rosso, Inallettabile, Leone aristato, Mentana, Poulard di Ciano, Risciola, and Terminillo. Trace compounds such as two conjugated flavones, vitexin (17.13-34.32 µg/kg) and isovitexin (9.76-30.01 µg/kg), were also determined. Poulard di Ciano, presumably an autochthonous wheat of the Reggio Emilia province (northern Italy), showed a peculiar quali/quantitative phenolic profile (7097.03 µg/kg sum of total phenolic compounds and 1.97 sum of hydroxycinnamic acids to sum of hydroxybenzoic acids ratio) along with a tetraploid genome. Terminillo, Risciola, Gentil rosso, Mentana, and Leone aristato showed hexaploid genomes and high concentrations of phenolic compounds (ranging from 6796.12 to 7605.78 µg/kg), also in comparison with two modern varieties of bread wheat, Bolero and Blasco. The targeted metabolomic approach proved to be effective to determine some secondary metabolites of wheat. The richness in phenolic compounds combined with high rusticity and adaptability to marginal soils showed by ancient wheat varieties make them suitable for sustainable agricultural and organic cultivation.
Subject(s)
Chromatography, High Pressure Liquid/methods , Phenols/analysis , Plant Extracts/analysis , Tandem Mass Spectrometry/methods , Triticum/chemistry , Genome, Plant , Genotype , Triticum/classification , Triticum/geneticsABSTRACT
The Black Soldier Fly (Hermetia illucens (L.), Diptera: Stratiomyidae) is an insect whose larvae thrive on agro-industrial by-products. This study reports the first use of black soldier fly larvae processing residue (BSPR) as an innovative ingredient for growing media. BSPR was characterized and evaluated to partially replace commercial peat (CP) in the production of potted plants. Chemical and microbiological analysis showed the suitability of BSPR for soilless production. Hence, six growing media mixtures (CP 100%â¯+â¯slow acting synthetic solid fertilizer, CP 90%â¯+â¯BSPR 10%, CP 80%â¯+â¯BSPR 20%, CP 70%â¯+â¯BSPR 30%, CP 60%â¯+â¯BSPR 40% and CP 100% without fertilizer) were assessed for the production of baby leaf lettuce, basil and tomato potted plants. Using BSPR in a proportion up to 20%, all investigated crops showed values significantly greater than or comparable to those obtained using CP 100%â¯+â¯slow acting synthetic solid fertilizer. In general, BSPR used in a proportion up to 20% increased the crop growth of baby leaf lettuce, basil and tomato, recording a high total dry weight (+31%, compared to the total average) and the measured leaf parameters (+39% of leaf area, +14% of leaf number), without showing abiotic stresses. This study indicates that BSPR used in a proportion up to 20% might be a valid approach for soilless production of potted baby leaf lettuce, basil and tomato plants.
Subject(s)
Diptera , Simuliidae , Animals , Fertilizers , Larva , SoilABSTRACT
Agricultural industrial wastes can frequently be used as raw materials in the production of bio-fuels. Olive-oil milling wastewater is considered as one of the most polluting agro-industrial residues, but fortunately due to its high content of organic matter, it has the potential to be a valuable starting material to obtain bio-ethanol via fermentation with Saccharomyces cerevisiae. The fermentation of olive-oil milling wastewater has been demonstrated with good yield of ethanol (8-12%v/v) once the level of reducing sugars is appropriate and the phenolic fraction, which inhibits the yeast, is removed.
Subject(s)
Ethanol/chemical synthesis , Plant Oils/chemistry , Waste Disposal, Fluid/methods , Agriculture , Fermentation , Humans , Olive OilABSTRACT
Metal-organic framework (MOF) on activated carbon (AC) enhanced the performance of cathodes but longevity needs to be considered in the presence of metal chelators or ligands, such as phosphate, present in wastewaters. MOF catalysts on AC initially produced 2.78±0.08Wm-2, but power decreased by 26% after eight weeks in microbial fuel cells using a 50mM phosphate buffer (PBS) and acetate due to decreased cathode performance. However, power was still 41% larger than that of the control AC (no MOF). Power generation using domestic wastewater was initially 0.73±0.01Wm-2, and decreased by 21% over time, with power 53% larger than previous reports, although changes in wastewater composition were a factor in performance. Adding phosphate salts to the wastewater did not affect the catalyst performance over time. While MOF catalysts are therefore initially adversely affected by chelators, performance remains enhanced compared to plain AC.