Ultrasensitive detection of Ag+and Ce3+ions using highly fluorescent carboxyl-functionalized carbon nitride nanoparticles.

The fluorescence quenching of carboxyl-rich g-C3N4nanoparticles was found to be selective to Ag+and Ce3+with a limit of detection as low as 30 pM for Ag+ions. A solid-state thermal polycondensation reaction was used to produce g-C3N4nanoparticles with distinct green fluorescence and high water solubility. Dynamic light scattering indicated an average nanoparticle size of 95 nm. The photoluminescence absorption and emission maxima were centered at 405 nm and 540 nm respectively which resulted in a large Stokes shift. Among different metal ion species, the carboxyl-rich g-C3N4nanoparticles were selective to Ag+and Ce3+ions, as indicated by strong fluorescence quenching and a change in the fluorescence lifetime. The PL sensing of heavy metal ions followed modified Stern-Volmer kinetics, and CNNPs in the presence of Ag+/Ce3+resulted in a higher value ofKapp(8.9 × 104M-1) indicating a more efficient quenching process and stronger interaction between CNNP and mixed ions. Sensing was also demonstrated using commercial filter paper functionalized with g-C3N4nanoparticles, enabling practical on-site applications.

Analyte-dependent Rabi splitting in solid-state plexcitonic sensors based on plasmonic nanoislands strongly coupled to J-aggregates.

A key challenge in the field of plexcitonic quantum devices is the fabrication of solid-state, device-friendly plexcitonic nanostructures using inexpensive and scalable techniques. Lithography-free, bottom-up nanofabrication methods have remained relatively unexplored within the context plexcitonic coupling. In this work, a plexcitonic system consisting of thermally dewetted plasmonic gold nanoislands (AuNI) coated with a thin film of J-aggregates was investigated. Control over nanoisland size and morphology allowed for a range of plasmon resonances with variable detuning from the exciton. The extinction spectra of the hybrid AuNI/J-aggregate films display clear splitting into upper and lower hybrid resonances, while the dispersion curve shows anti-crossing behavior with an estimated Rabi splitting of 180 eV at zero detuning. As a proof of concept for quantum sensing, the AuNI/J-aggregate hybrid was demonstrated to behave as a plexcitonic sensor for hydrochloric acid vapor analyte. This work highlights the possibility of using thermally dewetted nanoparticles as a platform for high-quality, tunable, cost-effective, and scalable plexcitonic nanostructures for sensing devices and beyond.

Sponge-shaped Au nanoparticles: A stand-alone metallic photocatalyst for driving the light-induced CO2 reduction reaction.

Coinage metal nanoparticles (NPs) enable plasmonic catalysis by generating hot carriers that drive chemical reactions. Making NPs porous enhances the adsorption of reactant molecules. We present a dewetting and dealloying strategy to fabricate porous gold nanoparticles (Au-Sponge) and compare their CO2 photoreduction activity with respect to the conventional gold nanoisland (Au-Island) morphology. Porous gold nanoparticles exhibit an unusually broad and red-shifted plasmon resonance which is in agreement with the results of finite difference time domain (FDTD) simulations. The key insight of this work is that the multi-step reduction of CO2 driven by short-lived hot carriers generated by the d → s interband transition proceeds extremely quickly as evidenced by the generation of methane. A 3.8-fold enhancement in the photocatalytic performance is observed for the Au-Sponge in comparison to the Au-Island. Electrochemical cyclic voltammetry measurements confirm the 2.5-fold increase in the surface area and roughness factor of the Au-Sponge sample due to its porous nature. Our results indicate that the product yield is limited by the amount of surface adsorbates i.e. reactant-limited. Isotope-labeled mass spectrometry using 13CO2 was used to confirm that the reaction product (13CH4) originated from CO2 photoreduction. We present the plasmon-mediated photocatalytic transformation of 4-aminothiophenol (PATP) into p,p'-dimercaptoazobenzene (DMAB) using Au-Sponge and Au-Island samples.

Measurement and Characterization of the Electrical Properties of Actin Filaments.

Actin filaments, as key components of the cytoskeleton, have aroused great interest due to their numerous functional roles in eukaryotic cells, including intracellular electrical signaling. The aim of this research is to characterize the alternating current (AC) conduction characteristics of both globular and polymerized actin and quantitatively compare their values to those theoretically predicted earlier. Actin filaments have been demonstrated to act as conducting bionanowires, forming a signaling network capable of transmitting ionic waves in cells. We performed conductivity measurements for different concentrations of actin, considering both unpolymerized and polymerized actin to identify potential differences in their electrical properties. These measurements revealed two relevant characteristics: first, the polymerized actin, arranged in filaments, has a lower impedance than its globular counterpart; second, an increase in the actin concentration leads to higher conductivities. Furthermore, from the data collected, we developed a quantitative model to represent the electrical properties of actin in a buffer solution. We hypothesize that actin filaments can be modeled as electrical resistor-inductor-capacitor (RLC) circuits, where the resistive contribution is due to the viscous ion flows along the filaments; the inductive contribution is due to the solenoidal flows along and around the helix-shaped filament and the capacitive contribution is due to the counterion layer formed around each negatively charged filament.

A Presentation of Babesiosis in the Setting of Low-Grade Follicular B-cell Lymphoma.

Babesiosis is a tick-borne parasitic infection seen in the Northeast and upper Midwest regions of the United States. Clinically, this intra-erythrocytic parasitic infection can present in a variety of ways, including fever, fatigue, malaise, or myalgia. Of note, these presenting symptoms are very similar to symptoms that can also be seen in patients with low-grade lymphoma. Thus, differentiating between babesiosis infection and active, symptomatic low-grade lymphoma can be difficult. We present a patient with concurrent severe babesiosis infection and follicular lymphoma. This case report provides a unique overlap of Hematology/Oncology and Infectious Disease and the ensuing diagnostic challenges when both tick-borne illnesses and low-grade lymphoma present together. We suggest including babesiosis screening in the pretreatment evaluation for the use of rituximab in patients with the above symptomatology and geography. This will help rule out alternate confounding diagnoses of babesiosis infection before initiating immunosuppressive treatment for active, symptomatic low-grade lymphoma. Using immunosuppressive agents such as rituximab to treat suspected low-grade lymphoma, before ruling out tick-borne illnesses, can be harmful. Our goal is to reduce such instances.

Selection and Optimization of Carbon-Reinforced Polyether Ether Ketone Process Parameters in 3D Printing-A Rotating Component Application.

The selection of process parameters is crucial in 3D printing for product manufacturing. These parameters govern the operation of production machinery and influence the mechanical properties, production time, and other aspects of the final product. The optimal process parameter settings vary depending on the product and printing application. This study identifies the most suitable cluster of process parameters for producing rotating components, specifically impellers, using carbon-reinforced Polyether Ether Ketone (CF-PEEK) thermoplastic filament. A mathematical programming technique using a rating method was employed to select the appropriate process parameters. The research concludes that an infill density of 70%, a layer height of 0.15 mm, a printing speed of 60 mm/s, a platform temperature of 195 °C, an extruder temperature of 445 °C, and an extruder travel speed of 95 mm/s are optimal process parameters for manufacturing rotating components using carbon-reinforced PEEK material.

Bioinspiration and biomimetics in marine robotics: a review on current applications and future trends.

Over the past few years, the research community has witnessed a burgeoning interest in biomimetics, particularly within the marine sector. The study of biomimicry as a revolutionary remedy for numerous commercial and research-based marine businesses has been spurred by the difficulties presented by the harsh maritime environment. Biomimetic marine robots are at the forefront of this innovation by imitating various structures and behaviors of marine life and utilizing the evolutionary advantages and adaptations these marine organisms have developed over millennia to thrive in harsh conditions. This thorough examination explores current developments and research efforts in biomimetic marine robots based on their propulsion mechanisms. By examining these biomimetic designs, the review aims to solve the mysteries buried in the natural world and provide vital information for marine improvements. In addition to illuminating the complexities of these bio-inspired mechanisms, the investigation helps to steer future research directions and possible obstacles, spurring additional advancements in the field of biomimetic marine robotics. Considering the revolutionary potential of using nature's inventiveness to navigate and thrive in one of the most challenging environments on Earth, the current review's conclusion urges a multidisciplinary approach by integrating robotics and biology. The field of biomimetic marine robotics not only represents a paradigm shift in our relationship with the oceans, but it also opens previously unimaginable possibilities for sustainable exploration and use of marine resources by understanding and imitating nature's solutions.

Dendritic Copper Current Collectors as a Capacity Boosting Material for Polymer-Templated Si/Ge/C Anodes in Li-Ion Batteries.

Dendritic copper offers a highly effective method for synthesizing porous copper anodes due to its intricate branching structure. This morphology results in an elevated surface area-to-volume ratio, facilitating shortened electron pathways during aqueous and electrolyte permeation. Here, we demonstrate a procedure for a time- and cost-efficient synthesis routine of fern-like copper microstructures as a host for polymer-templated Si/Ge/C thin films. Dissolvable Zintl clusters and sol-gel chemistry are used to synthesize nanoporous coating as the anode. Cyclic voltammetry (CV) with KOH as the electrolyte is used to estimate the surface area increase in the dendritic copper current collectors (CCs). Half cells are assembled and tested with battery-related techniques such as CV, galvanostatic cycling, and electrochemical impedance spectroscopy, showing a capacity increase in the dendritic copper cells. Energy-dispersive X-ray spectroscopy is used to estimate the removal of K in the bulk after oxidizing the Zintl phase K12Si8Ge9 in the polymer/precursor blend with SiCl4. Furthermore, scanning electron microscopy images are provided to depict the thin films after synthesis and track the degradation of the half cells after cycling, revealing that the morphological degradation through alloying/dealloying is reduced for the dendritic Cu CC anodes as compared with the bare reference. Finally, we highlight this time- and cost-efficient routine for synthesizing this capacity-boosting material for low-mobility and high-capacity anode coatings.

Raman Spectroscopy Reveals Photobiomodulation-Induced α-Helix to ß-Sheet Transition in Tubulins: Potential Implications for Alzheimer's and Other Neurodegenerative Diseases.

In small clinical studies, the application of transcranial photobiomodulation (PBM), which typically delivers low-intensity near-infrared (NIR) to treat the brain, has led to some remarkable results in the treatment of dementia and several neurodegenerative diseases. However, despite the extensive literature detailing the mechanisms of action underlying PBM outcomes, the specific mechanisms affecting neurodegenerative diseases are not entirely clear. While large clinical trials are warranted to validate these findings, evidence of the mechanisms can explain and thus provide credible support for PBM as a potential treatment for these diseases. Tubulin and its polymerized state of microtubules have been known to play important roles in the pathology of Alzheimer's and other neurodegenerative diseases. Thus, we investigated the effects of PBM on these cellular structures in the quest for insights into the underlying therapeutic mechanisms. In this study, we employed a Raman spectroscopic analysis of the amide I band of polymerized samples of tubulin exposed to pulsed low-intensity NIR radiation (810 nm, 10 Hz, 22.5 J/cm2 dose). Peaks in the Raman fingerprint region (300-1900 cm-1)-in particular, in the amide I band (1600-1700 cm-1)-were used to quantify the percentage of protein secondary structures. Under this band, hidden signals of C=O stretching, belonging to different structures, are superimposed, producing a complex signal as a result. An accurate decomposition of the amide I band is therefore required for the reliable analysis of the conformation of proteins, which we achieved through a straightforward method employing a Voigt profile. This approach was validated through secondary structure analyses of unexposed control samples, for which comparisons with other values available in the literature could be conducted. Subsequently, using this validated method, we present novel findings of statistically significant alterations in the secondary structures of polymerized NIR-exposed tubulin, characterized by a notable decrease in α-helix content and a concurrent increase in ß-sheets compared to the control samples. This PBM-induced α-helix to ß-sheet transition connects to reduced microtubule stability and the introduction of dynamism to allow for the remodeling and, consequently, refreshing of microtubule structures. This newly discovered mechanism could have implications for reducing the risks associated with brain aging, including neurodegenerative diseases like Alzheimer's disease, through the introduction of an intervention following this transition.