Using multivariate nonlinear mixed-effects model to investigate factors influencing symptom improvement after high tibial osteotomy in combination with bone marrow concentrate injection for medial compartment knee osteoarthritis: a prospective, open-label study.

PURPOSE: To investigate the effects of various demographic, structural, radiographic, and clinical factors on the prognosis of patients with medial compartmental knee osteoarthritis with varus deformity undergoing medial opening wedge high tibial osteotomy (HTO) in combination with bone marrow concentrate (BMC) injection. METHODS: In this prospective study, 20 patients underwent medial opening wedge HTO in combination with BMC injection with 12 months of follow-up. The structural and radiographic outcomes were evaluated by femorotibial angle and posterior tibial slope angle. The clinical outcomes were evaluated by visual analogue scale (VAS), Western Ontario and McMaster Universities Arthritis Index (WOMAC), and The Knee injury and Osteoarthritis Outcome Score (KOOS). Multivariate nonlinear mixed-effects models with asymptotic regressions were used to model the trajectory of symptom improvement. RESULTS: Medial opening wedge HTO in combination with BMC corrected the malalignment of the knee and led to significant symptom relief. The improvement of clinical symptoms reached a plateau 6 months after the surgery. Greater symptom severity at baseline and lower Kellgren-Lawrance (KL) grades were correlated with better post-operative clinical outcomes. Body-Mass-Index (BMI), femorotibial angle, age, and sex may also play a role in influencing the extent of symptom relief. CONCLUSION: Symptom severity at baseline is important for prognosis prediction. In clinical practice, we suggest that the evaluation of clinical features and functional status of the patients be more emphasised.

Successful Plate Fixation with Long Intramedullary Fibula Bone Graft for Periprosthetic Femur Fracture: A Case Report.

Background and objectives: Treatment of a displaced or comminuted periprosthetic distal femur fracture is challenging, especially in patients with osteoporosis. In this case report, we shared our successful surgical experience of using a long intramedullary fibula bone graft in a plate fixation surgery for a periprosthetic distal femur fracture in an extremely elderly patient with osteoporosis. Case report: A 95-year-old woman with severe osteoporosis (bone mineral density level: -3.0) presented with right knee pain and deformity after a fall, and a right periprosthetic distal femur fracture was identified. The patient underwent an open reduction and an internal plate fixation surgery with the application of a long intramedullary fibular bone graft. Due to a solid fixation, immediate weight-bearing was allowed after the surgery. She could walk independently without any valgus or varus malalignment or shortening 3 months after the surgery. A solid union was achieved 4 months postoperatively. Conclusions: We present a case wherein a long intramedullary allogenous fibula strut bone graft was used successfully to treat a right periprosthetic femur fracture in an extremely elderly patient. A long allogenous fibula bone graft can act not only as a firm structure for bridging the bone defect but also as a guide for precise component alignment. We believe this treatment option for periprosthetic fractures is beneficial for achieving biological and mechanical stability and facilitates early mobilization and weight-bearing for the patient.

Acute and Long-Term Effects of Mechanotherapy on the Outcome After an Achilles Repair: A Prospective Cohort Study With Historical Controls.

OBJECTIVES: To evaluate the effects of vibration on Achilles' tendon microcirculation and characteristics following surgical repair of Achilles' tendon rupture. DESIGN: Cohort study with historical controls. SETTING: A university institute. PARTICIPANTS: Participants (N=32), including 19 (16 men, 3 women; median [range] age: 43.0 [25.0-57.0] years) and 13 (10 men, 3 women; 44.00 [29.0-60.0] years) in the vibration (application to the ball of the foot, 30Hz, 2mm amplitude, 4kg pressure, and self-administration) and control groups, respectively, who underwent unilateral Achilles' tendon repairs were recruited. INTERVENTION: A 4-week vibration intervention in the vibration group. MAIN OUTCOME MEASUREMENTS: The tendon microcirculation was measured after the first session of vibration. The participants were evaluated repeatedly with bilateral follow-up measurements of tendon stiffness, 3 functional outcome tests, and a questionnaire survey. RESULTS: Acute effects of the vibration were observed immediately after the 5-minute vibration (P≤.001). Lower total hemoglobin and oxygen saturation were respectively observed (P=.043) in the repaired legs 3 and 6 months postsurgery in the vibration group as compared with the control group. The vibration group also showed greater tendon stiffness, heel raising height and hopping distance 3 or 6 months postoperation in both the repaired and noninjured legs (all P<.05). The microcirculatory characteristics 2 months postoperation were correlated with the outcomes at 6 months postoperation. CONCLUSIONS: Differences in microcirculatory characteristics and better rehabilitation outcomes were observed in the legs with an Achilles repair that underwent the early vibration intervention.

A New Technique to Increase Reliability in Measuring the Axis of Bone.

Measuring bone angles is an important method for diagnosing disease and predicting the prognosis in orthopedics. Traditionally, the angle is measured using lines drawn manually and adjusted by the naked eye. The purpose of the present study was to propose new methods to measure the bone angles formed by the axes of the calcaneus with good reliability and low operational error. The 2 new methods used linear regression analysis of the points inside and on the "envelope" line. The traditional method used the vector of the lines drawn for calculation. Digital radiographs of the lateral view of the feet from 51 patients were collected, and the angles were measured using these 3 methods. Next, we analyzed the reliability, differences, and correlations of these 3 methods. The intra- and interobserver comparisons revealed significant differences between the results of the 2 new methods and those of the traditional method. In addition, the new methods had greater reliability and better intra- and interobserver correlations than did the traditional method. We suggest that these 2 new methods to measure bone axis should be added to the Picture Archiving and Communication System to obtain more reliable and standardized data in clinical practice and for future research purposes.

Biomechanical Investigation of Hallux Valgus Deformity Treated with Different Osteotomy Methods and Kirschner Wire Fixation Strategies Using the Finite Element Method.

The aim of this study was to propose a finite element method based numerical approach for evaluating various hallux valgus treatment strategies. We developed three-dimensional hallux valgus deformity models, with different metatarsal osteotomy methods and Kirschner wire fixation strategies, under two types of standing postures. Ten Kirschner wire fixations were analyzed and compared. The fixation stability, bone stress, implant stress, and contact pressure on the osteotomy surface were calculated as the biomechanical indexes. The results showed that the biomechanical indexes of the osteotomy and Kirschner wire fixations for hallux valgus deformity could be effectively analyzed and fairly evaluated. The distal metatarsal osteotomy method provided better biomechanical indexes compared to the proximal metatarsal osteotomy method. This study proposed a finite element method based numerical approach for evaluating various osteotomy and Kirschner wire fixations for hallux valgus deformity before surgery.

Integration of statistical shape modeling and alternating interpolation-based model tracking technique for measuring knee kinematics in vivo using clinical interleaved bi-plane fluoroscopy.

Background: A 2D fluoroscopy/3D model-based registration with statistical shape modeling (SSM)-reconstructed subject-specific bone models will help reduce radiation exposure for 3D kinematic measurements of the knee using clinical alternating bi-plane fluoroscopy systems. The current study aimed to develop such an approach and evaluate in vivo its accuracy and identify the effects of the accuracy of SSM models on the kinematic measurements. Methods: An alternating interpolation-based model tracking (AIMT) approach with SSM-reconstructed subject-specific bone models was used for measuring 3D knee kinematics from dynamic alternating bi-plane fluoroscopy images. A two-phase optimization scheme was used to reconstruct subject-specific knee models from a CT-based SSM database of 60 knees using one, two, or three pairs of fluoroscopy images. Using the CT-reconstructed model as a benchmark, the performance of the AIMT with SSM-reconstructed models in measuring bone and joint kinematics during dynamic activity was evaluated in terms of mean target registration errors (mmTRE) for registered bone poses and the mean absolute differences (MAD) for each motion component of the joint poses. Results: The mmTRE of the femur and tibia for one image pair were significantly greater than those for two and three image pairs without significant differences between two and three image pairs. The MAD was 1.16 to 1.22° for rotations and 1.18 to 1.22 mm for translations using one image pair. The corresponding values for two and three image pairs were 0.75 to 0.89° and 0.75 to 0.79 mm; and 0.57 to 0.79° and 0.6 to 0.69 mm, respectively. The MAD values for one image pair were significantly greater than those for two and three image pairs without significant differences between two and three image pairs. Conclusions: An AIMT approach with SSM-reconstructed models was developed, enabling the registration of interleaved fluoroscopy images and SSM-reconstructed models from more than one asynchronous fluoroscopy image pair. This new approach had sub-millimeter and sub-degree measurement accuracy when using more than one image pair, comparable to the accuracy of CT-based methods. This approach will be helpful for future kinematic measurements of the knee with reduced radiation exposure using 3D fluoroscopy with clinically alternating bi-plane fluoroscopy systems.

Improvement in the clinical practicability of roentgen stereophotogrammetric analysis (RSA): free from the use of the dual X-ray equipment.

After total knee replacement, the monitoring of the prosthetic performance is often done by roentgenographic examination. However, the two-dimensional (2D) roentgen images only provide information about the projection onto the anteroposterior (AP) and mediolateral (ML) planes. Historically, the model-based roentgen stereophotogrammetric analysis (RSA) technique has been developed to predict the spatial relationship between prostheses by iteratively comparing the projective data for the prosthetic models and the roentgen images. During examination, the prosthetic poses should be stationary. This should be ensured, either by the use of dual synchronized X-ray equipment or by the use of a specific posture. In practice, these methods are uncommon or technically inconvenient during follow-up examination. This study aims to develop a rotation platform to improve the clinical applicability of the model-based RSA technique. The rotation platform allows the patient to assume a weight-bearing posture, while being steadily rotated so that both AP and ML knee images can be obtained. This study uses X-ray equipment with a single source and flat panel detectors (FPDs). Four tests are conducted to evaluate the quality of the FPD images, steadiness of the rotation platform, and accuracy of the RSA results. The results show that the distortion-induced error of the FPD image is quite minor, and the prosthetic size can be cautiously calibrated by means of the scale ball(s). The rotation platform should be placed closer to the FPD and orthogonal to the projection axis of the X-ray source. Image overlap of the prostheses can be avoided by adjusting both X-ray source and knee posture. The device-induced problems associated with the rotation platform include the steadiness of the platform operation and the balance of the rotated subject. Sawbone tests demonstrate that the outline error, due to the platform, is of the order of the image resolution (= 0.145 mm). In conclusion, the rotation platform with steady rotation, a knee support, and a handle can serve as an alternative method to take prosthetic images, without the loss in accuracy associated with the RSA method.

Biomechanical influence of pin placement and elbow angle on joint distraction and hinge alignment for an arthrodiatasis elbow-pin-fixator construct.

Stiffness and contracture of the periarticular tissues are common complications of a post-traumatic elbow. Arthrodiatasis is a surgical technique that uses an external fixator for initial immobilization and subsequent distraction. The two prerequisites for an ideal arthrodiatasis are concentric distraction (avoiding bony contact) and hinge alignment (reducing internal stress). This study used the finite element (FE) method to clarify the relationship between these two prerequisites and the initial conditions (pin placement, elbow angle, and distraction mode). A total of 12 variations of the initial conditions were symmetrically arranged to evaluate their biomechanical influence on concentric distraction and hinge alignment. The humeroulnar surface was hypothesized to be ideally distracted orthogonal to the line joining the tips of the olecranon and the coronoid. The eccentric separation of the humeroulnar surfaces is a response to the non-orthogonality of the distracting force and joining line. Pin placement significantly affects the effective moment arm of the fixing pins to distract the bridged elbow. Both elbow angle and distraction mode directly alter the direction of the distracting force at the elbow center. In general, the hinges misalignment occurs in a direction opposite to the distraction-activated site. After joint distraction, the elastic deflection of the fixing pins inevitably makes both elbow and fixator hinges to misalign. This indicates that both joint distraction and hinge alignment are the interactive mechanisms. The humeroulnar separation is more concentric in the situation of the 120 degrees humeral distraction by using stiffer pins with convergent placement. Even so, the eccentric displacement of the elbow hinge is a crucial consideration in the initial placement of the guiding pin to compensate for hinge misalignment.

Real-time gait cycle parameter recognition using a wearable accelerometry system.

This paper presents the development of a wearable accelerometry system for real-time gait cycle parameter recognition. Using a tri-axial accelerometer, the wearable motion detector is a single waist-mounted device to measure trunk accelerations during walking. Several gait cycle parameters, including cadence, step regularity, stride regularity and step symmetry can be estimated in real-time by using autocorrelation procedure. For validation purposes, five Parkinson's disease (PD) patients and five young healthy adults were recruited in an experiment. The gait cycle parameters among the two subject groups of different mobility can be quantified and distinguished by the system. Practical considerations and limitations for implementing the autocorrelation procedure in such a real-time system are also discussed. This study can be extended to the future attempts in real-time detection of disabling gaits, such as festinating or freezing of gait in PD patients. Ambulatory rehabilitation, gait assessment and personal telecare for people with gait disorders are also possible applications.

Three-Dimensional Subject-Specific Knee Shape Reconstruction with Asynchronous Fluoroscopy Images Using Statistical Shape Modeling.

Background and objectives: Statistical shape modeling (SSM) based on computerized tomography (CT) datasets has enabled reasonably accurate reconstructions of subject-specific 3D bone morphology from one or two synchronous radiographs for clinical applications. Increasing the number of radiographic images may increase the reconstruction accuracy, but errors related to the temporal and spatial asynchronization of clinical alternating bi-plane fluoroscopy may also increase. The current study aimed to develop a new approach for subject-specific 3D knee shape reconstruction from multiple asynchronous fluoroscopy images from 2, 4, and 6 X-ray detector views using a CT-based SSM model; and to determine the optimum number of planar images for best accuracy via computer simulations and in vivo experiments. Methods: A CT-based SSM model of the knee was established from 60 training models in a healthy young Chinese male population. A new two-phase optimization approach for 3D subject-specific model reconstruction from multiple asynchronous clinical fluoroscopy images using the SSM was developed, and its performance was evaluated via computer simulation and in vivo experiments using one, two and three image pairs from an alternating bi-plane fluoroscope. Results: The computer simulation showed that subject-specific 3D shape reconstruction using three image pairs had the best accuracy with RMSE of 0.52 ± 0.09 and 0.63 ± 0.085 mm for the femur and tibia, respectively. The corresponding values for the in vivo study were 0.64 ± 0.084 and 0.69 ± 0.069 mm, respectively, which was significantly better than those using one image pair (0.81 ± 0.126 and 0.83 ± 0.108 mm). No significant differences existed between using two and three image pairs. Conclusion: A new two-phase optimization approach was developed for SSM-based 3D subject-specific knee model reconstructions using more than one asynchronous fluoroscopy image pair from widely available alternating bi-plane fluoroscopy systems in clinical settings. A CT-based SSM model of the knee was also developed for a healthy young Chinese male population. The new approach was found to have high mode reconstruction accuracy, and those for both two and three image pairs were much better than for a single image pair. Thus, two image pairs may be used when considering computational costs and radiation dosage. The new approach will be useful for generating patient-specific knee models for clinical applications using multiple asynchronous images from alternating bi-plane fluoroscopy widely available in clinical settings. The current SSM model will serve as a basis for further inclusion of training models with a wider range of sizes and morphological features for broader applications.

Patient-specific instrumentation improves functional kinematics of minimally-invasive total knee replacements as revealed by computerized 3D fluoroscopy.

BACKGROUND AND OBJECTIVES: Minimally-invasive total knee arthroplasty (MIS-TKA) has demonstrated very good short-term success, but its mid- to long-term results remain inconclusive. The success may be related to the tradeoff between a small incision and accurate positioning of the implant components. Patient-specific instrumentation (PSI) aims to improve the accuracy in restoring the knee axis and the clinical outcomes for MIS-TKA, but the results are yet to be confirmed by accurate assessment during functional activities. The purpose of the current study was to measure and compare the in vivo three-dimensional (3D) rigid-body and surface kinematics of MIS-TKA implanted with and without PSI during isolated knee active flexion/extension and sit-to-stand using state-of-the-art 3D model-based fluoroscopy technology. METHODS: Ten patients treated for advanced medial knee osteoarthritis by MIS-TKA without PSI (non-PSI group) and nine with PSI (PSI group) participated in the current study. Each subject performed non-weight-bearing knee flexion/extension and sit-to-stand tasks while the motion of the prosthetic knee was under bi-plane fluoroscopy surveillance. The computer models of each of the knee prosthesis components were registered to the measured fluoroscopy images for each time frame via a novel validated 3D fluoroscopy method. Non-parametric 1-tailed Mann-Whitney tests were performed to detect the differences in the joint and surface kinematic variables every 10° of knee flexion between the non-PSI and PSI groups. The 1-tailed significance level was at α = 0.05. RESULTS: The PSI group showed clear, coupled flexion/internal rotation during activities, while the non-PSI group remained roughly at an externally rotated position with slight internal rotations. The coupled rotation in the PSI group was accompanied by an anterior displacement of the medial contact and a posterior displacement of the lateral contact, which was different from the screw-home mechanism. Neither of the two groups showed the normal roll-back phenomenon, i.e., posterior translation of the femur relative to the tibia during knee flexion. CONCLUSIONS: With the state-of-the-art 3D fluoroscopy method, differences in both the rigid-body and surface kinematics of the prosthetic knees between MIS-TKA with and without PSI were identified. Patients with PSI demonstrated significant positive effects on the reconstructed rigid-body kinematics of the knee, showing clearer coupled flexion/internal rotations - an important kinematic characteristic in healthy knees - than those without PSI during activities with or without weight-bearing. However, none of them showed normal contact patterns. The current findings will be helpful for surgical instrument design, as well as for surgical decision-making in MIS total knee arthroplasty.

Comparison and prediction of pullout strength of conical and cylindrical pedicle screws within synthetic bone.

BACKGROUND: This study was designed to derive the theoretical formulae to predict the pullout strength of pedicle screws with an inconstant outer and/or inner diameter distribution (conical screws). For the transpedicular fixation, one of the failure modes is the screw loosening from the vertebral bone. Hence, various kinds of pedicle screws have been evaluated to measure the pullout strength using synthetic and cadaveric bone as specimens. In the literature, the Chapman's formula has been widely proposed to predict the pullout strength of screws with constant outer and inner diameters (cylindrical screws). METHODS: This study formulated the pullout strength of the conical and cylindrical screws as the functions of material, screw, and surgery factors. The predicted pullout strength of each screw was compared to the experimentally measured data. Synthetic bones were used to standardize the material properties of the specimen and provide observation of the loosening mechanism of the bone/screw construct. RESULTS: The predicted data from the new formulae were better correlated with the mean pullout strength of both the cylindrical and conical screws within an average error of 5.0% and R2 = 0.93. On the other hand, the average error and R2 value of the literature formula were as high as -32.3% and -0.26, respectively. CONCLUSION: The pullout strength of the pedicle screws was the functions of bone strength, screw design, and pilot hole. The close correlation between the measured and predicted pullout strength validated the value of the new formulae, so as avoid repeating experimental tests.

Biomechanical investigation of different surgical strategies for the treatment of rib fractures using a three-dimensional human respiratory model.

Rib fracture is a common injury and can result in pain during respiration. Conservative treatment of rib fracture is applied via mechanical ventilation. However, ventilator-associated complications frequently occur. Surgical fixation is another approach to treat rib fractures. Unfortunately, this surgical treatment is still not completely defined. Past studies have evaluated the biomechanics of the rib cage during respiration using a finite element method, but only intact conditions were modelled. Thus, the purpose of this study was to develop a realistic numerical model of the human rib cage and to analyse the biomechanical performance of intact, injured and treated rib cages. Three-dimensional finite element models of the human rib cage were developed. Respiratory movement of the human rib cage was simulated to evaluate the strengths and limitations of different scenarios. The results show that a realistic human respiratory movement can be simulated and the predicted results were closely related to previous study (correlation coefficient>0.92). Fixation of two fractured ribs significantly decreased the fixation index (191%) compared to the injured model. This fixation may provide adequate fixation stability as well as reveal lower bone stress and implant stress compared with the fixation of three or more fractured ribs.

Comparison between different screening strategies to determine the statistical shape model of the pelvises for implant design.

BACKGROUND AND OBJECTIVES: The statistical shape model (SSM) of numerous bones has been used to determine the anatomical representative of the population- or race-specific design for periarticular implants. Whether to include size- and profile-mismatched bones in the SSM calculation is debatable. Therefore, the objective of this study was to characterize the screening strategies for the mismatched bones to improve the SSM calculation. METHODS: The bone database used in this study consisted of 20 pelvises. A systematic four-staged SSM calculation was used to evaluate the accuracy of the predicted SSM shape among the four size- and profile-screening strategies. Additionally, the surface-smoothing effects on the SSM results were investigated. Two comparison indices were used in terms of profile difference and surface smoothness. RESULTS: Significant variations in size and profile existed for the collected bones. By normalizing the aspect ratio of all bones, exclusion of the size-mismatched bones reduced the maximum and root mean square (RMS) error values of the profile difference by 18.9% and 17.5%, respectively. After further excluding the profile-improper bones, normalization reduced the RMS profile difference by 24.1% compared with the non-normalized strategy. Exclusion of the size-improper bones for non-normalized strategy would have reduced the RMS profile difference by 15.4%. After smoothness, the RMS profile difference of SSM was only 6.1% higher than that of the non-smoothness SSM. CONCLUSIONS: The four-stage calculation showed that the most favorable strategy was to normalize bones to the same aspect ratio and exclude improperly shaped bones. The model permitted inclusion of the original characteristics of the bones and preserved their shapes and excluded only significantly improper bones. After SSM calculation, the smoothed process provided satisfaction in quality with a statistically insignificant loss in bone morphology for population- or race-specific designs of implants.

Influence of muscular contractions on the stress analysis of distal femoral interlocking nailing.

BACKGROUND: In the literature, the commonly assumed loading conditions on the proximal femur are hip compression and/or gluteus contractions. However, no study has discussed the influence of muscle forces on failure of distal nail holes and locking screws. METHODS: This finite-element study analyzed the influence of muscular contractions on stress analysis of distal nail holes and locking screws. Three loading conditions were used for comparison, comprised of either hip compression alone or with muscle contractions. The head displacement of intact and fractured femur, the nail and screw stresses vs. fixation depth, and the stress distribution at the distal nail-screw interfaces were chosen as the comparison indices. FINDINGS: The addition of trochanteric and diaphysial muscles showed the more physiologically reasonable displacement of the femoral head. However, all loading conditions consistently showed the hole and screw stresses increase as the nail was inserted deeper. The stress distribution at the distal nail-screw interfaces was remarkably different under the condition of with or without the muscular contractions. The exertion of muscles predicted the fatigue cracking originated at the edge of the nail holes on the medial rather than lateral side. INTERPRETATION: Only hip compression and/or gluteus contraction generated a characteristic bending stress pattern and medially deflected nail curvature. Comparatively, the trochanteric and diaphysial muscles stabilized the femoral head and resulted in the higher stress concentration at the distally medial nail-screw interfaces. However, further experimental and clinical studies, focusing on the failure sites of the distal femoral hardware, should be undertaken to validate such findings.

Pulmonary tuberculosis with delayed tuberculosis infection of total knee arthroplasty.

Tuberculous prosthetic joint infection is rare. While early diagnosis is critical for treatment, it is usually delayed. Here, we present the case of a 72-year-old patient who underwent total knee arthroplasty for his right knee due to degenerative arthritis 4 years ago. Three years after arthroplasty, pulmonary tuberculosis was found and he hesitated on starting antituberculosis chemotherapy. He suffered from progressive pain and swelling of the right prosthetic knee for 2 months before this admission. The pathologic report of the debridement of the right prosthetic knee was caseous granulomatous inflammation with positive acid-fast staining bacilli. The culture of the debridement also yielded Mycobacterium tuberculosis. He died due to aspiration pneumonia with multiorgan dysfunction. This case is a reminder of the possibility of tuberculosis while dealing with prosthetic joint infection.

Theoretical prediction of pullout strengths for dental and orthopaedic screws with conical profile and buttress threads.

BACKGROUND AND OBJECTIVE: The pullout strength of a screw is an indicator of how secure bone fragments are being held in place. Such bone-purchasing ability is sensitive to bone quality, thread design, and the pilot hole, and is often evaluated by experimental and numerical methods. Historically, there are some mathematical formulae to simulate the screw withdrawal from the synthetic bone. There are great variations in screw specifications. However, extensive investigation of the correlation between experimental and analytical results has not been reported in literature. METHODS: Referring to the literature formulae, this study aims to evaluate the differences in the calculated pullout strengths. The pullout tests of the surgical screws are measured and the sawbone is used as the testing block. The absolute errors and correlation coefficients of the experimental and analytical results are calculated as the comparison baselines of the formulae. RESULTS: The absolute error of the dental, traumatic, and spinal groups are 21.7%, 95.5%, and 37.0%, respectively. For the screws with a conical profile and/or tiny threads, the calculated and measured results are not well correlated. The formulae are not accurate indicators of the pullout strengths of the screws where the design parameters are slightly varied. However, the experimental and numerical results are highly correlated for the cylindrical screws. The pullout strength of a conical screw is higher than that of its counterpart, but all formulae consistently predict the opposite results. In general, the bony purchase of the buttress threads is securer than that of the symmetric thread. CONCLUSIONS: An absolute error of up to 51.4% indicates the theoretical results cannot predict the actual value of the pullout strength. Only thread diameter, pitch, and depth are considered in the investigated formulae. The thread profile and shape should be formulated to modify the slippage mechanism at the bone-screw interfaces and simulate the strength change in the squeezed bones, especially for the conical screw.

Characteristics of Intratendinous Microcirculation Shortly After an Achilles Rupture and Subsequent Treatment Outcomes.

BACKGROUND: Early microcirculatory responses after experimental tenotomy are critical to the healing of tendons and their ultimate tensile strength. The effects of changes in microcirculation on the outcomes of tendon healing, however, have not been determined. OBJECTIVES: To assess microcirculation values in injured Achilles tendons in the first 3 months after surgical repair and to correlate the inter-limb microcirculatory changes with functional outcomes at 3 and 6 months after surgery. DESIGN: Case-control study. SETTING: A university sports physiotherapy laboratory. PARTICIPANTS: Thirteen subjects (median age: 45 years; range: 34.8-51.9 years) with a repaired Achilles tendon were recruited. METHODS OR INTERVENTION: Surgical repair. MAIN OUTCOME MEASUREMENTS: Measurements were obtained at 1, 2, 3, and 6 months after surgery. Bilateral measurements of tendon microcirculation (total hemoglobin [THb] and oxygen saturation [StO2]) were recorded at the first 3 time points, whereas outcome measures of a Taiwan Chinese version of the Victorian Institute of Sport Assessment Scale-Achilles questionnaire, one-leg hopping distance, the star excursion balance test, and the heel raise index were conducted at the third and fourth time points. Correlations between the inter-limb microcirculatory changes, eg, between the measurements at 2 months and 1 month (2-1) after surgery, at 3 months and 2 months (3-2) after surgery, and at 3 months and 1 month (3-1) after surgery, and the outcome measures were investigated. RESULTS: Compared with the noninjured tendons, the repaired Achilles demonstrated greater THb (at 1, 2, and 3 months; P = .017, .008, and .012 respectively) and StO2 (at 3 months; P = .017). Furthermore, the THb2-1 and THb3-2, StO2 2-1, and StO2 3-2 showed correlations with the heel raise index, differences in the star excursion balance test and one-leg hopping distance between the noninjured leg and injured leg, and Taiwan Chinese version of the Victorian Institute of Sport Assessment Scale-Achilles questionnaire scores (rho -0.921 to 0.855). CONCLUSIONS: Changes in the inter-limb microcirculation shortly after Achilles repair were correlated with subsequent symptoms and functional symmetry. LEVEL OF EVIDENCE: III.

Simultaneous dislocation of the carpometacarpal and metacarpophalangeal joints of the thumb in a motorcyclist.

Combined dislocation of more than one joint in a single finger is a rare injury. An amateur motorcyclist sustained simultaneous closed dislocation of the carpometacarpal and metacarpophalangeal joints of the thumb as an isolated injury after falling from his motorcycle during an abrupt stop from high speed. The dislocated joints were reduced by closed means on the day of injury. After 18 months, the functional result of his right thumb was excellent. The mechanism of injury and management of this uncommon motorcycle injury is reported.