Deficiency of circ_0103809 Attenuates Non-small Cell Lung Cancer Malignant Progression by Controlling miR-153-3p/HDAC1 Network.

Circular RNAs are vital players in tumorigenesis. We held the purpose to investigate the role and mechanism of circ_0103809 in non-small cell lung cancer (NSCLC). The expressions of circ_0103809, miR-153-3p and HDAC1 mRNA were determined using quantitative real-time PCR assay, and HDAC1 protein was quantified using western blot analysis. MTT, EdU, flow cytometry, tube-formation, wound healing and tube-formation assays were conducted for functional analysis. The predicted relationship among circ_0103809, miR-153-3p and HDAC1 was ascertained using dual-luciferase analysis, RIP assay and pull-down analysis. Animal models were further constructed to realize circ_0103809's role in vivo. Circ_0103809 was upregulated NSCLC specimens, cells and serum-derived exosomes. Serum exosomal circ_0103809 had the potency to be a diagnostic biomarker for NSCLC. Circ_0103809 silencing inhibited NSCLC cell growth, metastasis and angiogenesis and triggered cell cycle arrest and apoptosis. Circ_0103809 deficiency also suppressed the growth of transplanted tumors. Circ_0103809 acted as the miR-153-3p sponge, and the biological effects of circ_0103809 knockdown were relieved by miR-153-3p inhibition. HDAC1 was directly targeted by miR-153-3p, and miR-153-3p enrichment inhibited NSCLC cell malignant phenotypes by sequestering HDAC1. Circ_0103809 knockdown repressed NSCLC malignant progression partly by regulating miR-153-3p/HDAC1 signaling.

Interface Bonding Properties and Mechanism of Poplar Board-Veneered Wood Fiber/Polypropylene Composites with Chlorinated Polypropylene Films as an Intermediate Layer.

It is difficult to decorate wood plastic composites with wood veneer because their surface energy is low and there are no pores on the surface. In the present study, we developed an environmentally friendly and convenient method to decorate the wood fiber/polypropylene (WF/PP) composite board. We used chlorinated polypropylene (CPP) as an intermediate film to laminate wood veneer to WF/PP composite boards by hot-pressing at 110 °C and then cooling down. The interface bonding mechanism between the wood veneer, CPP layer, and WF/PP composite was analyzed using scanning electron microscopy (SEM), energy dispersive X-ray analysis (EDS), surface roughness test, and attenuated total reflection-Fourier transform infrared spectroscopy (ATR-FTIR). The results indicated that CPP penetrated the wood pores and formed a firm anchor structure. SEM images showed small cracks at the interface between CPP and PP when WF/PP contained less WF. The results of SEM-EDS and ATR-FTIR showed that WF/PP composites with a higher WF content would have more fibers exposed at the surface, thus making the surface rough and providing more specific surface area. The veneered WF/PP composite with 80% WF content had the highest surface bond strength and water resistance.

Rapid fabricated in-situ polymerized lignin hydrogel sensor with highly adjustable mechanical properties.

Conductive hydrogels have been widely used as sensors owing to their tissue-like properties. However, the synthesis of conductive hydrogels with highly adjustable mechanical properties and multiple functions remains difficult to achieve yet highly needed. In this study, lignin hydrogel characterized by frost resistance, UV resistance, high conductivity, and highly adjustable mechanical properties without forming by-products was prepared through a rapid in-situ polymerization of acrylic acid/zinc chloride (AA/ZnCl2) aqueous solution containing lignin extract induced by the reversible quinone-catechol redox of the ZnCl2-lignin system at room temperature. Results revealed that the PAA/ZnCl2/lignin hydrogel exhibited mechanical properties with tensile stress (ranging from 0.08 to 3.28 MPa), adhesion to multiple surfaces (up to 62.05 J m-2), excellent frost resistance (-70-20 °C), UV resistance, and conductivity (0.967 S m-1), which further endow the hydrogel as potential strain and temperature sensor with wide monitor range (0-300 %), fatigue resistance, and quick response (70 ms for 150 % strain). This study proposed and developed a green, simple, economical, and efficient processing method for a hydrogel sensor in flexible wearable devices and man-machine interaction fields.

Innovative wearable solutions: Semi-releasing ion-conductive lignin hydrogel sensors for enhanced practicability.

The severe negative effects of impurities adhering to the external surface of wearable devices can significantly influence the signal transmission, performance, and lifespan of hydrogel sensors. Herein, we developed an ion-conducting hydrogel sensor with a strong adhesive side and a non-adhesive side, similar to a "semi-releasing material." This hydrogel, formulated using deep eutectic solvents obtained from choline chloride and acrylic acid, contained lignin. This versatile material, exhibiting properties similar to semi-releasing materials, was treated with an AlCl3 solution on one side. Additionally, the hydrogel was successfully used as a highly adhesive strain sensor for real-time monitoring of various human activity signals. Moreover, the hydrogel demonstrated excellent environmental tolerance and conductivity. Lignin extracted from wood flour endowed the hydrogel sensor with excellent adhesion energy (up to 427.1 J/m2) and UV resistance. Treatment of hydrogels with AlCl3 completely eliminated their adhesiveness, thereby enhancing fracture elongation and tensile strength. This improvement can be attributed to the absence of carboxyl groups and the formation of a metal-phenolic network. The implementation of this convenient and efficient strategy provides a more feasible approach to address challenges related to impurity adhesion and signal transmission in flexible wearable devices.

Nacre-inspired starch-based bioplastic with excellent mechanical strength and electromagnetic interference shielding.

Bioplastics have aroused significant interest in researchers to relieve the serious environmental pollution caused by the ubiquity of petroleum-based plastics. However, it remains a great challenge to construct functional bioplastics with excellent mechanical strength, water resistance, and heat resistance. Inspired by the interesting structure of nacre, a novel starch-based bioplastic was prepared via a self-assembly technique, using 2,2,6,6-tetramethylpiperidine-1-oxy-oxidized cellulose nanofibers modified starch, nano-montmorillonite, and reduced graphene oxide as raw materials. Due to the unique layered structure and rich interfacial interaction, the starch-based bioplastic exhibited excellent mechanical properties, while the tensile strength was up to 37.39 MPa. Furthermore, it represented outstanding water resistance, heat resistance, repairability, renewability and biodegradability. Especially, the starch-based bioplastic demonstrated a strong electromagnetic interference shielding effectiveness (EMI SE), which was higher than 35 dB with a thickness of 0.5 mm. These powerful properties provided the possibility for functional applications of starch-based bioplastics.

Cellulose-based light-management film exhibiting flame-retardant and thermal-healing properties.

The increased use and expansion of biomass applications offer a viable approach to diminish reliance on petroleum-derived resources and promote carbon neutrality. Cellulose, being the most abundant natural polymer on Earth, has garnered considerable attention. This study introduces a straightforward method to fabricate a cellulose-based multifunctional composite film designed for efficient light management, specifically featuring flame retardant and thermal-healing capabilities. The film incorporates a microfibrillated cellulose (MFC) matrix with functional components, namely benzoxazine resin (BR) and 2-hydroxyethyl methacrylate phosphate (HEMAP). Utilizing dynamic covalent crosslinking, the composite films exhibit satisfactory self-healing properties. The combined effects of BR and HEMAP contribute to the effective flame retardancy of the composite film. Furthermore, the resulting film shields ultraviolet and blue light, offering comfortable interior lighting by mitigating harsh light and extending light propagation. The film also demonstrates favorable water resistance and high tensile strength. The exceptional multifunctional properties, coupled with its safety and extended service life, position it as a potential optical management film for smart building materials.

Self-healing hydrogel with multiple adhesion as sensors for winter sports.

Hydrogels are widely used as sensors in the field of wearable devices. However, the hydrogels were rarely designed to endure the harsh outdoor environment in winter, including extremely low temperature, ultraviolet (UV) radiation and variable humidity. In addition, physical damage is also a challenge for hydrogels. In this study, a self-healing hydrogel with adhesion was prepared as a sensor for winter sports using a one-pot method. Polyvinyl alcohol was used as the hydrogel matrix, providing the hydrogel preferable self-healing properties and adhesion to various surfaces such as porcine skin, metal, glass, and plastic. Lithium chloride was used for the chain entanglement of polyvinyl alcohol, forming a hydrogel with excellent ionic conductivity (24.29 S m-1 at room temperature, 13.45 S m-1 under -18 ℃) to detect human motion and temperature changes. Together with ethylene glycol, lithium chloride also provided successful water retention ability and frost resistance. The hydrogel remained stable after 30 d of storage at room temperature and -18 ℃. Sodium lignosulfonate was introduced to improve the mechanical properties and ultraviolet (UV) resistance of hydrogel, created nearly 100% UV shielding with a thickness of 0.5 mm. These advantages provide great potential to the hydrogel for application in flexible wearable devices for winter sports.

A novel, robust mechanical strength, and naturally degradable double crosslinking starch-based bioplastics for practical applications.

The increasing number of petroleum-based plastics has caused severe environmental pollution, which has attracted great research interest in the development of low-cost, renewable, and degradable starch-based bioplastics. However, developing starch-based bioplastics with robust mechanical strength, excellent water resistance, and thermal resistance remains a great challenge. In this study, we presented a simple and efficient method for preparing high-performance novel starch-based bioplastics with chemical and physical double crosslinking network structures filled with 2,2,6,6-tetramethylpiperidine 1-oxy-oxidized cellulose nanofibers and zinc oxide nanoparticles. Compared with pure starch-based bioplastics, the tensile strength of the novel robust strength starch-based bioplastics increased by 431.2 %. The novel starch-based bioplastics exhibited excellent mechanical properties (tensile strength up to 24.54 MPa), water resistance, thermal resistance, and biodegradability. In addition, the novel starch-based bioplastics could be reused, crushed, dissolved, and re-poured after use. After recycling, the novel starch-based bioplastics could be discarded in the soil to achieve complete degradation within six weeks. Owing to these characteristics, the novel starch-based bioplastics are good alternatives used to replace traditional petroleum-based plastics and have great development prospects.

Mussel-inspired cellulose nanofiber/poly(vinyl alcohol) hydrogels with robustness, self-adhesion and antimicrobial activity for strain sensors.

Flexible strain sensors have attracted substantial attention given their application in human-computer interaction and personal health monitoring. Due to the inherent disadvantages of conventional hydrogels, the manufacture of hydrogel strain sensors with high tensile strength, excellent adhesion, self-healing and antimicrobial properties in vitro, and conductive stability is still a challenge. Herein, a conductive hydrogel consisting of polydopamine-coated cellulose nanofibers (CNF@PDA), carbon nanotubes (CNT), and polyvinyl alcohol (PVA) was developed. The CNTs in PVA/CNF@PDA/CNT hydrogels were uniformly dispersed in the presence of CNF@PDA by hydrogen bonding, resulting in a nearly threefold increase in conductivity (0.4 S/m) over hydrogels without PDA. The hydrogel exhibited satisfactory tensile properties (tensile stress up to 0.79 MPa), good fatigue resistance, self-recovery and excellent antimicrobial activity in vitro. It showed excellent adhesion, especially the adhesion strength of pigskin was increased to 27 kPa. In addition, the hydrogel was used as a strain sensor, exhibiting excellent strain sensitivity (strain coefficient = 2.29), fast response (150 ms), and great durability (over 1000 cycles). The fabricated strain sensors can detect both large and subtle human movements (e.g., wrist bending and vocalization) with stable and repeatable electrical signals, indicating potential applications in personal health monitoring.

CCR7 and VEGF-C: molecular indicator of lymphatic metastatic recurrence in pN0 esophageal squamous cell carcinoma after Ivor-Lewis esophagectomy?

BACKGROUND: Esophageal squamous cell carcinoma (ESCC) is a malignant tumor with a high incidence of lymph node metastasis. This study was undertaken to investigate the expression of CCR7 and VEGF-C in pN0 ESCC and its relationship with lymphatic metastatic recurrence. METHODS: The expression of CCR7 and VEGF-C was examined by RT-PCR and immunohistochemistry. The recurrence rates were calculated by the Kaplan-Meier method and their difference was determined by log rank analysis. Cox regression analysis was performed to determine the independent risk factors. RESULTS: In 99 patients, CCR7 mRNA expression was observed in 42 patients with a 3 year recurrence rate of 57.1%; VEGF-C mRNA expression was observed in 52 patients with a 3 year recurrence rate of 53.8%; and coexpression of CCR7 mRNA and VEGF-C mRNA was observed in 22 patients with a 3 year recurrence of 63.6%. Neither CCR7 mRNA nor VEGF-C mRNA expression was observed in 27 patients with a 3 year recurrence rate of 22.2%. The recurrence rates of patients with positive expression of CCR7 mRNA and/or VEGF-C mRNA were significantly higher than in patients without expression of both CCR7 mRNA and VEGF-C mRNA. We achieved better concordance between RT-PCR and immunohistochemistry detection of both markers. The Cox regression analysis showed tumor T classification, positive expression of CCR7/VEGF-C mRNA, and positive expression of CCR7/VEGF-C protein in tumor tissues to be independent risk factors for 3 year recurrence. CONCLUSIONS: Patients with positive expression of CCR7 and/or VEGF-C have a higher recurrence rate than patients without expression of both CCR7 and VEGF-C. CCR7 and VEGF-C may become molecular indicators of disease in patients vulnerable to lymphatic metastatic recurrence.

Downregulation of circATXN7 represses non-small cell lung cancer growth by releasing miR-7-5p.

BACKGROUND: Circular RNAs (circRNAs) participate in the occurrence and progression of many cancers. CircRNA ataxin 7 (circATXN7) (circBase ID: hsa_circ_0066436) plays a promoting influence on gastric cancer progression. However, the biological role of circATXN7 in non-small cell lung cancer (NSCLC) is indistinct. METHODS: Levels of circATXN7, microRNA (miR)-7-5p, and profilin 2 (PFN2) mRNA were detected using quantitative real-time polymerase chain reaction (RT-qPCR). Proliferation, apoptosis, metastasis, and invasion were analyzed using cell counting kit-8 (CCK-8), colony formation, 5-ethynyl-2'-deoxyuridine (EdU), flow cytometry, and transwell assays. Protein levels were analyzed using western blotting (WB) and immunohistochemistry (IHC). The relationship between circATXN7 or PFN2 and miR-7-5p was analyzed by dual-luciferase reporter and RNA immunoprecipitation (RIP) assays. The biological function of circATXN7 was verified by xenograft assay. RESULTS: CircATXN7 and PFN2 were highly expressed in NSCLC, whereas miR-7-5p expression had the opposite trend. CircATXN7 overexpression constrained apoptosis and promoted proliferation, metastasis, invasion, and epithelial-mesenchymal transition of NSCLC cells, but circATXN7 silencing played the opposing influence and repressed xenograft tumor growth in vivo. CircATXN7 served as a miR-7-5p sponge, and circATXN7 regulated malignant behaviors of NSCLC cells through sponging miR-7-5p. PFN2 acted as a miR-7-5p target. PFN2 silencing overturned the promoting effect of miR-7-5p inhibitor on NSCLC cell malignancy, while PFN2 overexpression reversed the inhibitory impact of miR-7-5p mimic on NSCLC cell malignancy. CONCLUSION: CircATXN7 accelerated the malignancy of NSCLC cells through adsorbing miR-7-5p and upregulating PFN2, offering evidence to support circATXN7 as a target for NSCLC treatment.

Methyltransferase 3, N6-adenosine-methyltransferase complex catalytic subunit-induced long intergenic non-protein coding RNA 1833 N6-methyladenosine methylation promotes the non-small cell lung cancer progression via regulating heterogeneous nuclear ribonucleoprotein A2/B1 expression.

Long intergenic non-protein coding RNA 1833 (LINC01833) exhibits elevated expression in the non-small cell lung cancer (NSCLC) tissues, while its molecular mechanism in NSCLC progression remains elusive. Herein, the proliferation, migration, invasion as well as apoptosis of NSCLC cells were assessed. The potential N6-methyladenosine (m6A) modification site was predicted by the m6aVar tool. RNA pulldown and m6A-specific immunoprecipitation assays were used to detect the interaction between LINC01833 and methyltransferase 3, N6-adenosine-methyltransferase complex catalytic subunit (METTL3). RNA pull-down together with mass spectrometry were performed to assess the binding relationship between LINC01833 and heterogeneous nuclear ribonucleoprotein A2/B1 (HNRNPA2B1) in NSCLC. Tumor xenograft mice model was established, and the tumor size and weight were measured. The results demonstrated that LINC01833 expression was elevated in NSCLC samples. Overexpression of LINC01833 promoted proliferative, migratory, and invasive abilities and inhibited HCC827 cell apoptosis. LINC01833 knockdown inhibited tumor growth in mice. LINC01833 is further demonstrated to be modulated by METTL3, which is highly expressed in NSCLC samples. In addition, RNA pulldown and m6A-specific immunoprecipitation assays indicated that LINC01833 might form a complex with HNRNPA2B1. In conclusion, m6A transferase METTL3-induced LINC01833 m6A methylation promotes NSCLC progression through modulating HNRNPA2B1 expression. Our findings indicated that LINC01833 might be a therapeutic target for NSCLC.

Hsa_circ_0017639 regulates cisplatin resistance and tumor growth via acting as a miR-1296-5p molecular sponge and modulating sine oculis homeobox 1 expression in non-small cell lung cancer.

Cisplatin (DDP)-induced chemoresistance is an important reason for the failure of non-small cell lung cancer (NSCLC) treatment. Circular RNAs (circRNAs) participate in the chemoresistance of diverse cancers. However, the function of hsa_circ_0017639 (circ_0017639) in the DDP resistance of NSCLC is unclear. Forty-one NSCLC samples (21 DDP-resistant samples and 20 DDP-sensitive samples) were utilized in the research. The relative expression levels of some genes were determined by real-time quantitative polymerase chain reaction (RT-qPCR). 3-(4,5-Dimethylthiazol-2-yl)-2,5-Diphenyltetrazolium Bromide (MTT) assay for half-maximal inhibitory concentration (IC50) value of DDP and cell viability, colony formation and 5-ethynyl-2'-deoxyuridine (EDU) assays for cell proliferation, flow cytometry assay for cell apoptosis, transwell assay for cell invasion and wound-healing assay for cell migration were performed. The regulation mechanism of circ_0017639 was demonstrated by a dual-luciferase reporter assay. We observed higher levels of circ_0017639 in DDP-resistant NSCLC samples and cells. Functionally, circ_0017639 silencing decreased tumor growth and elevated DDP sensitivity in vivo and induced apoptosis, repressed proliferation, invasion, and migration of DDP-resistant NSCLC cells in vitro. Mechanically, circ_0017639 modulated sine oculis homeobox 1 (SIX1) expression via sponging microRNA (miR)-1296-5p. Also, miR-1296-5p inhibitor restored circ_0017639 knockdown-mediated impacts on cell DDP resistance in DDP-resistant NSCLCs. Furthermore, SIX1 overexpression counteracted the inhibiting impact of miR-1296-5p upregulation on DDP resistance and malignant phenotypes of DDP-resistant NSCLC cells. In conclusion, circ_0017639 conferred DDP resistance and promoted tumor growth via elevating SIX1 expression through sequestering miR-1296-5p in NSCLC, providing a new mechanism for understanding the chemoresistance and progression of NSCLC.

An environmentally tolerant, highly stable, cellulose nanofiber-reinforced, conductive hydrogel multifunctional sensor.

The application of flexible multifunctional sensors based on conductive hydrogels in human health detection has been widely studied. Herein, a facile one-pot method is proposed to prepare ionic conductive hydrogels by dissolving polyvinyl alcohol (PVA), cellulose nanofiber (CNF), and aluminum chloride hexahydrate (AlCl3·6H2O) in a dimethyl sulfoxide (DMSO)/water binary solvent. The resulting ionically-conductive organohydrogels have high stretchability (up to 696%), fast response (130 ms), wide operating temperature (-50 °C to 50 °C), and long-term stability (30 days). The hydrogel sensor exhibits excellent signal sensing capability (human motion and sound detection signals) and cycling stability (1000 cycles) under extreme temperature and long-term storage conditions. Notably, the organohydrogel displays high sensitivity to both compressive deformation and temperature, resulting in multifunctional sensing performance. This work provides a viable approach for the long-term use of hydrogels as wearable devices in extreme environments and daily life.

Frost-resistant and ultrasensitive strain sensor based on a tannic acid-nanocellulose/sulfonated carbon nanotube-reinforced polyvinyl alcohol hydrogel.

The operating temperature of hydrogels, especially at low temperatures, is crucial due to their wide applicability in soft robots, sensors, and electronic skin. Hydrogels are often used at room temperature, but their performance may deteriorate at low temperatures. Therefore, it is crucial to develop hydrogels that can be used at low temperatures to expand their range of use. Herein, we have proposed a simple one-pot method to prepare a frost-resistant (-70 °C) and conductive hydrogel consisting of a glycerol (Gly)-water binary solvent. We have added tannic acid (TA)-coated carboxymethylated cellulose nanofibrils (CMCNFs) to poly (vinyl alcohol) (PVA) as a functional filler to improve the hydrogel's mechanical properties. The introduction of sulfonated carbon nanotubes (SCNT) has provided the hydrogel with high conductivity (0.1 S/m), strain sensitivity (gauge factor of 3.76), and cyclic stability (1600 cycles). Due to the strong hydrogen bonding and physical entanglement effects between the components, the hydrogel exhibied excellent tensile properties (297 %), high toughness (0.44 MJ/m3), and a high Young's modulus (1.25 MPa). These characteristics ensure that the hydrogel is well suited for low-temperature environments, health monitoring, and wearable devices.

circHUWE1 Exerts an Oncogenic Role in Inducing DDP-Resistant NSCLC Progression Depending on the Regulation of miR-34a-5p/TNFAIP8.

BACKGROUND: Circular RNAs (circRNAs) are reported as competing endogenous RNAs (ceRNAs) and play key roles in non-small-cell lung cancer (NSCLC) progression. Thus, this study was aimed at clarifying underlying molecular mechanisms of circHUWE1 in NSCLC. METHODS: The quantitative real-time polymerase chain reaction (RT-qPCR) and western blot analyses were used for examining circHUWE1, microRNA-34a-5p (miR-34a-5p), and tumor necrosis factor alpha-induced protein 8 (TNFAIP8). IC50 of cisplatin (DDP) in A549/DDP and H1299/DDP cells and cell viability were analyzed by the Cell Counting Kit 8 (CCK-8) assay. Colony forming assay was performed to assess colony forming ability. Cell apoptosis and cell cycle distribution were determined by flow cytometry. Migrated and invaded cell numbers were examined by transwell assay. The association among circHUWE1, miR-34a-5p, and TNFAIP8 was analyzed by dual-luciferase reporter and RNA immunoprecipitation assays. A xenograft experiment was applied to clarify the functional role of circHUWE1 in vivo. RESULTS: circHUWE1 was upregulated in NSCLC tissues and cells, especially in DDP-resistant groups. circHUWE1 downregulation inhibited DDP resistance, proliferation, migration, and invasion while it induced apoptosis and cell cycle arrest of DDP-resistant NSCLC cells, which was overturned by silencing of miR-34a-5p. TNFAIP8 was a functional gene of miR-34a-5p, and the suppressive effects of miR-34a-5p overexpression on DDP-resistant NSCLC progression were dependent on the suppression of TNFAIP8. circHUWE1 inhibition also delayed tumor growth of DDP-resistant NSCLC cells. CONCLUSION: circHUWE1 functioned as a promoter in DDP-resistant NSCLC by interaction with miR-34a-5p-TNFAIP8 networks, providing novel insight into DDP-resistant NSCLC diagnosis and treatment.

Deriving the priority weights from probabilistic linguistic preference relation with unknown probabilities.

Generally, the probabilistic linguistic term set (PLTS) provides more accurate descriptive properties than the hesitant fuzzy linguistic term set does. The probabilistic linguistic preference relation (PLPR), which is applied to deal with complex decision-making problems, can be constructed for PLTSs. However, it is difficult for decision makers to provide the probabilities of occurrence for PLPR. To deal with this problem, we propose a definition of expected consistency for PLPR and establish a probability computing model to derive probabilities of occurrence in PLPR with priority weights for alternatives. A consistency-improving iterative algorithm is presented to examine whether or not the PLPR is at an acceptable consistency. Moreover, the consistency-improving iterative algorithm should obtain the satisfaction consistency level for the unacceptable consistency PLPR. Finally, a real-world employment-city selection is used to demonstrate the effectiveness of the proposed method of deriving priority weights from PLPR.

Role of Wood Fibers in Tuning Dynamic Rheology, Non-Isothermal Crystallization, and Microcellular Structure of Polypropylene Foams.

Microcellular polypropylene (PP)/wood fiber composite foams were fabricated via batch foaming assisted by supercritical CO2 (scCO2). Effects of wood fibers on rheology, crystallization, and foaming behaviors of PP were comprehensively investigated. The obtained results showed that the incorporation of wood fibers increased the complex viscosity and the storage modulus of the PP matrix. Jeziorny's model for non-isothermal crystallization kinetics indicated that wood fibers did not change the crystal growth. However, the crystallization rate of the PP matrix was decreased to a certain extent with increasing wood fiber loadings. The wood fiber exerts a noticeable role in improving the cell density and reducing the cell size, despite decreasing the expansion ratio. Interestingly, a "small-sized cells to large-sized cells" gradient cell structure was found around the wood fibers, implying cell nucleation was induced at the interface between wood fiber and PP matrix. When wood fiber loadings were specifically increased, a desirable microcellular structure was obtained. However, further increasing the wood fiber loadings deteriorated the cell structure. Moreover, the crystallinity of the composite foams initially decreased and then slightly increased with increasing wood fiber loadings, while the crystal size decreased.

[Restoration of pathological changes of emphysema by angiogenesis factors: experiment of rats].

OBJECTIVE: To investigate whether intratracheal administration of basic fibroblast growth factor (bFGF) and vascular endothelial growth factor (VEGF) restore the pulmonary function and pathology in emphysema, and research the mechanism of they restored pulmonary emphysema, and the pathogenesis of pulmonary emphysema. METHODS: Twenty-four Wistar rats were randomized into the 4 equal groups: bFGF group [receiving a single intratracheal instillation of porcine pancreatic elastase (PPE) 250 U/kg, and 4 weeks later receiving intratracheal instillation of bFGF 400 U once a week for 3 weeks), VEGF group (receiving a single intratracheal instillation of PPE 250 U/kg, and 4 weeks later receiving intratracheal instillation of VEGF 2 microg once a week for 3 weeks), control group [receiving a single intratracheal instillation of PPE 250 U/kg, and 4 weeks later receiving intratracheal instillation of normal saline (NS) once a week for 3 weeks], and normal group (receiving intratracheal instillation of NS in above-mentioned pattern). Four weeks after treatment, arterial blood sample was collected from the abdominal aorta to undergo blood gas analysis for assessment pulmonary function, and then the rata were killed with their lungs taken out to undergo pathological examination. Immunohistochemistry was performed to detect the CD34, markers of pulmonary capillary endothelial cells. RESULTS: There were no significant differences in the artery blood gas analysis among the four groups (all P > 0.05). The levels of mean alveoli number (MAN) of the bFGF and VEGF groups were (43 +/- 8)/HP and (44 +/- 9)/HP] respectively, both significantly higher than that of the control group [(30 +/- 6)/HP, both P < 0.01]. The levels of mean linear intercept (MLI) of the bFGF and VEGF groups were (196 +/- 38) microm and (194 +/- 38) microm respectively, both significantly lower than that of the control group [(288 +/- 68) microm, both P < 0.01). the mean alveoli area (MAA) level of the bFGF and VEGF groups were (9856 +/- 1864) microm(2) and (9804 +/- 1929) microm(2) respectively, both significantly lower than that of the control group [(14,525 +/- 3408) microm(2), both P < 0.01]. The percentages of CD34(+) cells of the bFGF and VEGF groups were (3.7 +/- 1.3)% and (2.6 +/- 1.2)% respectively, both significantly higher than that of the control group [(0.8 +/- 0.7)%, both P < 0.05). CONCLUSION: bFGF and VEGF can restore the pathological changes of experimental emphysema. The damage of pulmonary capillary may play an important role in the pathogenesis of pulmonary emphysema.

Vector similarity measures of hesitant fuzzy linguistic term sets and their applications.

In decision making, similarity measure and distance between two objects are crucial to be able to determine the relationship between those objects. Many researchers have received much attention for their research on this subject. In this study, we propose two novel similarity measures between hesitant fuzzy linguistic term sets (HFLTSs). In addition, two extensions of Technique for Order of Preference by Similarity to Ideal Solution (TOPSIS) are proposed in the hesitant fuzzy linguistic environments. Furthermore, an example of an application concerning traditional Chinese medical diagnosis and an MCDM problem have been given to illustrate the applicability and validation of these similarity measures of HFLTSs. Furthermore, the results of examples demonstrate that the Dice and Jaccard similarity measures are more reasonable than the cosine similarity measure with respect to HFLTSs.