Optimizing ZnO-Quantum Dot Interface with Thiol as Ligand Modification for High-Performance Quantum Dot Light-Emitting Diodes.

As the electron transport layer in quantum dot light-emitting diodes (QLEDs), ZnO suffers from excessive electrons that lead to luminescence quenching of the quantum dots (QDs) and charge-imbalance in QLEDs. Therefore, the interplay between ZnO and QDs requires an in-depth understanding. In this study, DFT and COSMOSL simulations are employed to investigate the effect of sulfur atoms on ZnO. Based on the simulations, thiol ligands (specifically 2-hydroxy-1-ethanethiol) to modify the ZnO nanocrystals are adopted. This modification alleviates the excess electrons without causing any additional issues in the charge injection in QLEDs. This modification strategy proves to be effective in improving the performance of red-emitting QLEDs, achieving an external quantum efficiency of over 23% and a remarkably long lifetime T95 of >12 000 h at 1000 cd m-2. Importantly, the relationship between ZnO layers with different electronic properties and their effect on the adjacent QDs through a single QD measurement is investigated. These findings show that the ZnO surface defects and electronic properties can significantly impact the device performance, highlighting the importance of optimizing the ZnO-QD interface, and showcasing a promising ligand strategy for the development of highly efficient QLEDs.

Study of high-pressure thermophysical properties of orthocarbonate Sr3CO5 using deep learning molecular dynamics simulations.

The exploration of the physical attributes of the recently discovered orthocarbonate Sr3CO5 is significant for comprehending the carbon cycle and storage mechanisms within the Earth's interior. In this study, first-principles calculations are initially used to examine the structural phase transitions of Sr3CO5 polymorphs within the range of lower mantle pressures. The results suggest that Sr3CO5 with the Cmcm phase exhibits a minimal enthalpy between 8.3 and 30.3 GPa. As the pressure exceeds 30.3 GPa, the Cmcm phase undergoes a transition to the I4/mcm phase, while the experimentally observed Pnma phase remains metastable under our studied pressure. Furthermore, the structural data of SrO, SrCO3, and Sr3CO5 polymorphs are utilized to develop a deep learning potential model suitable for the Sr-C-O system, and the pressure-volume relationship and elastic constants calculated using the potential model are in line with the available results. Subsequently, the elastic properties of Cmcm and I4/mcm phases in Sr3CO5 at high temperature and pressure are calculated using the molecular dynamics method. The results indicate that the I4/mcm phase exhibits higher temperature sensitivity in terms of elastic moduli and wave velocities compared to the Cmcm phase. Finally, the thermodynamic properties of the Cmcm and I4/mcm phases are predicted in the range of 0-2000 K and 10-120 GPa, revealing that the heat capacity and bulk thermal expansion coefficient of both phases increase with temperature, with the constant volume heat capacity gradually approaching the Dulong-Petit limit as the temperature rises.

Novel superhard semiconducting structures of C8B2N2 predicted using the first-principles approach.

Using first-principles calculations, we predicted three novel superhard semiconducting structures of C8B2N2 with a space group of P3m1. We investigated their mechanical properties and electronic structures up to 100 GPa. These three structures were successfully derived by substituting carbon (C) atoms with isoelectronic boron (B) and nitrogen (N) atoms in the P3m1 phase, which is the most stable structure of BCN and exhibits exceptional mechanical properties. Our results indicated that these structures had superior energy over previously reported t-C8B2N2, achieved by replacing C atoms in the diamond supercell with B and N atoms. To ensure their stable existence, we thoroughly examined their mechanical and dynamical stabilities, and we found that their hardness values reached 82.4, 83.1, and 82.0 GPa, which were considerably higher than that of t-C8B2N2 and even surpassing the hardness of c-BN. Calculations of the electron localization function revealed that the stronger carbon-carbon covalent bonds made them much harder than t-C8B2N2. Additionally, our further calculations of band structures revealed that these materials had indirect bandgaps of 4.164, 4.692, and 3.582 eV. These findings suggest that these materials have the potential to be used as superhard semiconductors, potentially surpassing conventional superhard materials.

A new pressure-densified orthogonal hard superconducting phase of RhB4.

A new hard superconducting phase of RhB4 with the space group Cmca is predicted, and the phase transition and mechanical and superconducting properties of RhB4 under 300 GPa are studied using first principles. We predict a new high-pressure phase of RhB4 by substituting the most stable Cmca structure of OsB4, known for its excellent mechanical properties. The calculated enthalpy shows that above 112.6 GPa, Cmca is superior to Pmmn as was previously predicted by particle swarm optimization. The stability of the predicted phase is checked using formation enthalpy, elastic constant and phonon dispersion. Additionally, the convex hull of the Rh-B system confirms that the phase is expected to be synthesized experimentally. The Cmca phase is an incompressible hard material with a hardness of 23.75 GPa at 300 GPa attributed to strong intralayer covalent B-B bonds. Furthermore, the phase is a relatively pressure-insensitive superconductor, with a Tc of 8.6 K at 112.6 GPa and a pressure-dependent coefficient of -0.03 K GPa-1. The finding reveals a superconducting hard material that is well-suited for extreme high-pressure environments.

Chiral perovskite-CdSe/ZnS QDs composites with high circularly polarized luminescence performance achieved through additive-solvent engineering.

Chiral perovskite materials are being extensively studied as one of the most promising candidates for circularly polarized luminescence (CPL)-related applications. Balancing chirality and photoluminescence (PL) properties is of great importance for enhancing the value of the dissymmetry factor (glum), and a higher glum value indicates better CPL. Chiral perovskite/quantum dot (QD) composites emerge as an effective strategy for overcoming the dilemma that achieving strong chirality and PL in chiral perovskite while at the same time achieving high glum in this composite is very crucial. Here, we choose diphenyl sulfoxide (DPSO) as an additive in the precursor solution of chiral perovskite to regulate the lattice distortion. How structural variation affects the chiral optoelectronic properties of the chiral perovskite has been further investigated. We find that chiral perovskite/CdSe-ZnS QD composites with strong CPL have been achieved, and the calculated maximum |glum| of the composites increased over one order of magnitude after solvent-additive modulation (1.55 × 10-3 for R-DMF/QDs, 1.58 × 10-2 for R-NMP-DPSO/QDs, -2.63 × 10-3 for S-DMF/QDs, and -2.65 × 10-2 for S-NMP-DPSO/QDs), even at room temperature. Our findings suggest that solvent-additive modulation can effectively regulate the lattice distortion of chiral perovskite, enhancing the value of glum for chiral perovskite/CdSe-ZnS QD composites.

On Cordelair-Greil Model about Electrophoretic Deposition.

Electrophoretic deposition (EPD) is a facile technique to deposit quantum dots (QDs) films, which can be used as the color conversion layers for display applications. To better understand the EPD process, researchers have built many models of the EPD process. However, most of these models lack solid experimental support. Here, by adopting simple yet effective solvent engineering and well-designed experiments, this study proves the Cordelair-Greil model on EPD processes. Moreover, some supplements about this model are made according to practical experiments. The experimental verification of the Cordelair-Greil model is a solid step toward revealing the dynamics of the EPD process. Furthermore, the formation of cracks in EPD deposited QD films is prevented through solvent engineering. This work proves that besides modifying the intrinsic properties of QDs, solvent engineering is also a simple, effective, and low-cost way to study the EPD process and improve the QD film qualities deposited.

Realization of inversely designed metagrating for highly efficient large angle beam deflection.

Directional emission source is one of the key components for multiple-view three-dimensional display. It is hard to achieve high efficiency and large deflection angle direction sources via geometric optics due to the weak confinement of light. The metasurface especially metagrating provides a promising method to control light effectively. However, the conventional forward design methods for metasurface are inherently limited by insufficient control of Bloch modes, which causes a significant efficiency drop at a large deflection angle. Here, we obtained high efficiency large deflection angle metagratings by realizing the constructive interferences among the propagation Bloch modes and enhancing the outcoupling effect at the desired diffraction order. The grating structures that support the coupling of Bloch modes were designed by an inverse design method for different incident wavelengths, and the total phase response of a supercell can be tailored. For a red (620 nm) incident light, the theoretical deflection efficiency of a silicon metagrating can be higher than 80% from 30° to 80°. The experimental deflection efficiency can achieve 86.43% for a 75° deflection metagrating. The matched simulation and experimental results strongly support the reliability of developed algorithm. Our inverse design approach could be extended to the green (530 nm) and blue (460 nm) incident light with titanium dioxide metagratings, with theoretical deflection efficiency of over 80% in a large deflection angle range of 30° to 80°. Considering the multiple visible wavelength deflection capability, the developed algorithm can be potentially applied for full color three-dimensional display, and other functional metagrating devices based on different dielectric materials.

Enhancing the stability of environmental resistance of alloyed CdZnSeS@ZnS quantum dots by doping Ti ions into shell layer.

Colloidal quantum dots (QDs) are promising luminescent materials for display and lighting, but their stability has long been an issue. Here, we designed a passivation strategy of doping Ti ions into the shell of alloyed CdZnSeS@ZnS QDs. The results showed that Ti ions were successfully doped into the ZnS shell and the stability of QDs was improved. In the aging test, the Ti ions doped QDs maintained 51.4% of the initial performance after 90 h of aging, while the pristine QDs decreased to less than 25% of the initial value. In addition, we discuss the reasons why Ti ions doping improves the stability of QDs. Ti ions are found to form Ti-S bonds in the ZnS shell, which has high binding energy and strong oxidation resistance. Most importantly, since there is no external physical insulating coating, the optimized QDs can also be directly used in electroluminescent devices, showing great potential in electroluminescence applications.

Analyzing and modulating energy transfer in ternary-emissive system of quantum dot light-emitting diodes towards efficient emission.

The mechanisms for energy transfer including Förster resonance energy transfer (FRET) and radiative energy transfer in ternary-emissive system consists of blended-quantum dots (QDs, red-QDs blended with blue-QDs) emissive layer (EML) and blue-emissive hole-transport material that contained in quantum dot light-emitting diodes (QLEDs) are complicated. As the energy transfer could exhibit either positive or negative impact on QD's photoluminescence (PL) and electroluminescence (EL), it is important to analyze and modulate energy transfer in such ternary-emissive system to obtain high-efficiency QLEDs. In this work, we have demonstrated that proper B-QDs doping has a positive impact on R-QDs' PL and EL, where these improvements were attributed to the B-QDs' spacing effect on R-QDs which weakens homogeneous FRET among R-QDs and near 100% efficient heterogeneous FRET from B-QDs to R-QDs. With optimization based on the analysis of energy transfer, the PL quantum yield of blended-QDs (with R:B blending ratio of 90:10, in quality) film has been enhanced by 35% compared with that of unblended R-QDs film. Moreover, thanks to the spacing effect and high-efficiency FRET from B-QDs to R-QDs, the external quantum efficiency of QLEDs that integrate optimized blended-QDs (R:B=90:10) EML reaches 22.1%, which is 15% higher than that of the control sample (19.2%) with unblended R-QDs EML. This work provides a systematically analytical method to study the energy transfer in ternary-emissive system, and gives a valid reference for the analysis and development of the emerging QLEDs that with blended-QDs EML.

[Research Progress of FAM60A in the Regulation of Cellular Function].

FAM60A,a cell cycle protein,is a subunit of the SIN3 transcription regulator family member A/histone deacetylase(SIN3-HDAC)complex and plays an important role in cell cycle regulation,cell morphology change,cell proliferation,differentiation and migration,early embryogenesis and so on.Studies in recent years have shown that FAM60A plays a role in the occurrence and development of tumors including human osteosarcoma,esophageal cancer,gastric cancer,lung cancer and liver cancer,providing a new research direction for tumor diagnosis and treatment.Based on the research results in recent years at home and abroad,this paper discussed the effects of FAM60A on cellular functions.

Establishing Multifunctional Interface Layer of Perovskite Ligand Modified Lead Sulfide Quantum Dots for Improving the Performance and Stability of Perovskite Solar Cells.

While organic-inorganic halide perovskite solar cells (PSCs) show great potential for realizing low-cost and easily fabricated photovoltaics, the unexpected defects and long-term stability against moisture are the main issues hindering their practical applications. Herein, a strategy is demonstrated to address the main issues by introducing lead sulfide quantum dots (QDs) on the perovskite surface as the multifunctional interface layer on perovskite film through establishing perovskite as the ligand on PbS QDs. Meanwhile, the multifunctions are featured in three aspects including the strong interactions of PbS QDs with perovskites particularly at the grain boundaries favoring good QDs coverage on perovskites for ultimate smooth morphology; an inhibition of iodide ions mobilization by the strong interaction between iodide and the incorporated QDs; and the reduction of the dangling bonds of Pb2+ by the sulfur atoms of PbS QDs. Finally, the device performances are highly improved due to the reduced defects and non-radiative recombination. The results show that both open-circuit voltage and fill factor are significantly improved to the high values of 1.13 V and 80%, respectively in CH3 NH3 PbI3 -based PSCs, offering a high efficiency of 20.64%. The QDs incorporation also enhances PSCs' stability benefitting from the induced hydrophobic surface and suppressed iodide mobilization.

Factors influencing the working temperature of quantum dot light-emitting diodes.

Quantum dot light-emitting diodes (QLEDs) possess huge potential in display due to their outstanding optoelectronic performance; however, serve degradation during operation blocks their practical applications. High temperature is regarded as one of major factors causing degradation. Therefore, a systematical study on the working temperature of QLEDs is very essential and urgent for the development of high stable QLEDs. In this work, different influence factors such as the electro-optic conversion efficiency (EOCE), voltage, current density, active area, substrate size, substrate type and sample contact are discussed in detail on the working temperature of QLEDs. The research results show that the working temperature of general QLEDs under normal operation conditions is usually smaller than 75 °C when the ambient temperature is 25 °C. However, temperature of QLEDs working under extreme conditions, such as high power or small substrate size, will exceed 100 °C, resulting in irreversible damage to the devices. Moreover, some effective measures to reduce the working temperature are also proposed. The analysis and discussion of various influencing factors in this work will provide guidance for the design of stable QLEDs and help them work at a safer temperature.

Suppressing Strong Exciton-Phonon Coupling in Blue Perovskite Nanoplatelet Solids by Binary Systems.

Quasi-two-dimensional (2D) perovskites are promising candidates for light generation owing to their high radiative rates. However, strong exciton-phonon interactions caused by mechanical softening of the surface act as a bottleneck in improving their suitability for a wide range of lighting and display applications. Moreover, it is not easily available to tune the phonon interactions in bulk films. Here, we adopt bottom-up fabricated blue emissive perovskite nanoplatelets (NPLs) as model systems to elucidate and as well as tune the phonon interactions via engineering of binary NPL solids. By optimizing component domains, the phonon coupling strength can be reduced by a factor of 2 driven by the delocalization of 2D excitons in out-of-plane orientations. It shows the picosecond energy transfer originated from the Förster resonance energy transfer (FRET) efficiently competes with the exciton-phonon interactions in the binary system.

High-Performance Inverted Planar Perovskite Solar Cells Enhanced by Thickness Tuning of New Dopant-Free Hole Transporting Layer.

A new hole transporting material (HTM) named DMZ is synthesized and employed as a dopant-free HTM in inverted planar perovskite solar cells (PSCs). Systematic studies demonstrate that the thickness of the hole transporting layer can effectively enhance the morphology and crystallinity of the perovskite layer, leading to low series resistance and less defects in the crystal. As a result, the champion power conversion efficiency (PCE) of 18.61% with JSC = 22.62 mA cm-2 , VOC = 1.02 V, and FF = 81.05% (an average one is 17.62%) is achieved with a thickness of ≈13 nm of DMZ (2 mg mL-1 ) under standard global AM 1.5 illumination, which is ≈1.5 times higher than that of devices based on poly(3,4-ethylenedioxythiophene)/poly(styrene sulfonic acid) (PEDOT:PSS). More importantly, the devices based on DMZ exhibit a much better stability (90% of maximum PCE retained after more than 556 h in air (relative humidity ≈ 45%-50%) without any encapsulation) than that of devices based on PEDOT:PSS (only 36% of initial PCE retained after 77 h in same conditions). Therefore, the cost-effective and facile material named DMZ offers an appealing alternative to PEDOT:PSS or polytriarylamine for highly efficient and stable inverted planar PSCs.

Multiband enhancement of magnetic dipole emission with tapered hollow hyperbolic metamaterials.

Based on a single resonance, nanostructures often provide narrowband enhancement for magnetic dipole emissions. Here, tapered hollow hyperbolic metamaterial is designed in order to produce a multiband emission enhancement. Specifically, a series of coaxial magnetic hot spots is excited inside the structure in five discrete bands. Meanwhile, we demonstrate that the emission enhancement can be achieved at both multiple wavelengths and multiple spatial positions in one single device. An enhancement factor of radiative decay rate up to 694 is obtained. Results of this paper might open new possibilities for nanostructures to achieve multiband light emission enhancement in the magneto-optical domain.

Two-dimensional liquid crystal polarization grating via linearly polarized light modified multi-beam polarization interferometry.

Holographic lithography is widely used as an effective approach for two-dimensional (2D) photonic crystal fabrication. However, for the fabrication of 2D polarization structures based on photoaligned liquid crystals (LCs), holographic lithography method is limited. The fabrication requires full coverage of light intensity, 2D chiral distribution and continuously varying polarization direction, which could be hardly guaranteed by multi-beam interference of circularly polarized light (CPL). Herein, we introduce a linearly polarized light (LPL) into a three-CPL interference configuration to improve the interference field and fulfill the critical requirement. The introduced LPL intensity is chosen to be 1/5 of the CPL to guarantee both full coverage of light intensity and well photoalignment defined LC directors. Moreover, the introduction of the weak LPL into multiple CPL interference is shown to give little disturbance to the desired diffraction properties.

Electrically switchable photonic crystals based on liquid-crystal-infiltrated TiO2-inverse opals.

Electrically switchable photonic crystals are demonstrated based on TiO2 inverse opals infiltrated with liquid crystals. Macroporous anatase TiO2 inverse opals are fabricated from polystyrene opal templates through a sandwich vacuum backfilled method and followed by calcination. Upon liquid crystal infiltration, the optical properties of the hybrid organic/inorganic structure are characterized by reflectance measurements of the Bragg peak, the position of which can be switched using an external electric field. The physical mechanism underlying this switchable behavior is the reorientation of the liquid crystal molecules inside the spherical voids by the applied electric field, resulting in a significant change of the refractive index contrast between the liquid crystal and the TiO2 inverse opal. With advantageous features of cost-effective fabrication, easy integration, and electric control, such TiO2 inverse opals infiltrated with liquid crystals could play an important role in future development of active photonic devices.

Beyond OLED: Efficient Quantum Dot Light-Emitting Diodes for Display and Lighting Application.

The unique features of solution-processed quantum dots (QDs) including emission tunability in the visible range, high-quality saturated color and outstanding intrinsic stability in environment are highly desired in various application fields. Especially, for the preparation of wide color gamut displays, QDs with high photoluminescence quantum yield are deemed as the optimal fluorescent emitter that has been utilized in the backlight for liquid crystal display. Nevertheless, the commercialization of electrically driven self-emissive quantum dot light-emitting diode (QLED) display is the ultimate target due to its merits of high contrast, slim configuration and compatibility with flexible substrate. Through the great efforts devoted to material engineering and device configuration, astonishing progresses have been made in device performance, giving the QLED technology a great chance to compete with other counterparts for next-generation displays. In this review, we retrospect the development roadmap of QLED technology and introduce the essential principles in the QLED devices. Moreover, we discuss the key factors that affect the QLED efficiency and lifetime. Finally, the advances in device architectures and pixel patterning are also summarized.

Clinical Features and Prognosis of Crohn's Disease with Upper Gastrointestinal Tract Phenotype in Chinese Patients.

BACKGROUND: The epidemiology of upper gastrointestinal (L4) Crohn's disease in China remains poorly characterized. AIMS: We aimed to identify the clinical characteristics of L4 disease and clarify the relationship between disease characteristics at diagnosis and early outcomes. METHODS: We retrospectively enrolled 246 patients diagnosed between 2013 and 2017 and followed up for > 1 year post-diagnosis. Primary outcomes included the 1-year rates of hospitalization and abdominal surgery according to disease location and behavior. RESULTS: Of 80 patients with L4 disease (61, 25, and 18 with esophagogastroduodenal, jejunal, and proximal ileal involvement, respectively), none had granuloma, whereas 66.7%, 50%, 46.9%, 75%, and 70% had disease-specific endoscopic lesions in the esophagus, stomach, duodenum, jejunum, and proximal ileum, respectively. Compared to non-L4 disease, L4 disease was associated with higher rates of abdominal surgery (41.3% vs. 11.4%, P < 0.001) but similar rates of hospitalization within 1 year post-diagnosis. In L4 disease, jejunal and proximal ileal involvement was associated with stricturing behavior (P = 0.034, P < 0.001) and higher abdominal surgery rate (both: P < 0.001). Risk factors for abdominal surgery within 1 year post-diagnosis included age ≥ 40 years (OR 1.920; 95% CI 1.095-3.367), L4 phenotype (OR 6.335; 95% CI 3.862-10.390), stricturing disease (OR 3.162; 95% CI 1.103-9.866), and penetrating disease (OR 11.504; 95% CI 3.409-38.825), whereas the protective factor was female sex (OR 0.214; 95% CI 0.123-0.373). CONCLUSIONS: Early outcomes are worse for L4 than for non-L4 disease. Jejunoileum involvement predicts stricturing disease and early surgery. More aggressive initial therapy is needed to improve L4-disease prognosis.

Alkaloids from Melodinus henryi with anti-inflammatory activity.

One new quinolinic scandine-type monoterpeniod alkaloid, 3-oxo-scandine (1), as well as seven known ones (2-8), was isolated from the roots of Melodinus henryi. Their structures were elucidated by extensive spectroscopic analysis. All of the compounds were prepared and evaluated for their anti-inflammatory activities by measuring the inhibitory activity of nitric oxide (NO) in vitro in RAW 264.7 mouse peritoneal macrophages. Compounds 6 and 7 showed significant activities with IC50 values of 8.54 and 5.19 µM, respectively.