ABSTRACT
Nanocrystals (NCs) are complex systems that offer a superior level of detailed engineering at the atomic level. The large number of novel and revolutionary applications have made nanocrystals of special interest. In particular oxide perovskites are one of the most widely investigated family of materials in solid-state chemistry, especially for their ferroelectric and superconducting properties. In addition to these well-known properties, perovskites show good electrical conductivity (close to metals), ion conductivity and mixed ionic-electronic conductivity. In that sense, controlled synthesis of nanomaterials with special care over size and shape are essential in many fields of science and technology. Although it is well-known that physical methods deliver excellent quality nanomaterials, their high production cost has increased the interest to more affordable alternative chemical processes. In this review, we focus on the preparation of sub-10 nm oxide perovskite nanocrystals and the main strategies used to control the final properties of the obtained products. In the second part, we present the methods available for nanocrystal solutions processing together with the most remarkable applications foreseen.
ABSTRACT
1-Octadecene is a widely used solvent for high-temperature nanocrystal synthesis (120-320 °C). Here, we show that 1-octadecene spontaneously polymerizes under these conditions, and the resulting poly(1-octadecene) has a comparable solubility and size to nanocrystals stabilized by hydrophobic ligands. Typical purification procedures (precipitation/redispersion cycles or size exclusion chromatography) fail to separate the poly(1-octadecene) impurity from the nanocrystal product. To avoid formation of poly(1-octadecene), we replace 1-octadecene with saturated, aliphatic solvents. Alternatively, the nanocrystals' native ligands are exchanged for polar ligands, leading to significant solubility differences between nanocrystals and poly(1-octadecene), therefore allowing isolation of pure nanocrystals, free from polymer impurities. These results will help design superior syntheses and improve nanocrystal purity, an important factor in many applications.
ABSTRACT
Surface chemistry is a key enabler for colloidal nanocrystal applications. In this respect, metal oxide nanocrystals (NCs) stand out from other NCs as carboxylic acid ligands adsorb on their surface by dissociation to carboxylates and protons, the latter proving essential in electron transfer reactions. Here, we show that this binding motif sets the stage for chemically driven ligand displacement where the binding of amines or alcohols to HfO2 NCs is promoted by the conversion of a bound carboxylic acid into a non-coordinating amide or ester. Furthermore, the sustained ligand displacement, following the addition of excess carboxylic acid, provides a catalytic pathway for ester formation, whereas the addition of esters leads to NC-catalysed transesterification. Because sustained, chemically driven ligand displacement leaves the NCs-including their surface composition-unchanged and preserves colloidal stability, metal oxide nanocrystals are thus turned into effective nanocatalysts that bypass the tradeoff between colloidal stability and catalytic activity.
ABSTRACT
Ligand exchange is a crucial step between nanocrystal synthesis and nanocrystal application. Although colloidal stability and ligand exchange in nonpolar media are readily established, the exchange of native, hydrophobic ligands with polar ligands is less systematic. In this paper, we present a versatile ligand exchange strategy for the phase transfer of carboxylic acid capped HfO2 and ZrO2 nanocrystals to various polar solvents, based on small amino acids as the incoming ligand. To gain insight in the fundamental mechanism of the exchange, we study this system with a combination of FTIR, zeta potential measurements, and solution (1)H NMR techniques. The detection of surface-associated, small ligands with solution NMR proves challenging in this respect. Tightly bound amino acids are undetectable, but their existence can be proven through displacement with other ligands in titration experiments. Alternatively, we find that methyl moieties belonging to bound species can circumvent these limitations because of their more favorable relaxation properties as a result of internal mobility. As such, our results are not limited to amino acids but to any short-chained ligand and will therefore facilitate the rigorous investigation and understanding of various ligand exchange processes.
ABSTRACT
In this work, ZrO2 nanocrystals (NCs) are synthesized via a solvothermal treatment in benzyl alcohol, which is an established method for the synthesis of many metal oxide nanocrystals. We found that the use of microwave heating allows for a reduction in reaction time from 2 days in the autoclave to merely 4 h in the microwave. Furthermore, we were able to tune the crystallographic phase from pure cubic to pure monoclinic zirconia by changing the reaction mechanism through the use of a different zirconium precursor. Via GC-MS measurements, we found that the release of a strong acid during synthesis controls the key mechanism behind the control over crystal phase formation. The as-synthesized ZrO2 NCs (cubic or monoclinic) are small in size (3-10 nm), yet aggregated. However, aggregate-free NCs are generated through a surface-functionalization with carboxylic acid ligands, providing stabilization in apolar solvents via steric hindrance. Solution (1)H NMR was used to study the details of this post-modification step and the surface chemistry of the resulting aggregate-free NCs. This led to the conclusion that not only a different crystal structure but also a different surface chemistry is obtained, depending on the precursor composition.
ABSTRACT
Ligand exchange is central in the processing of inorganic nanocrystals (NCs) and requires understanding of surface chemistry. Studying sterically stabilized HfO2 and ZrO2 NCs using (1) H solution NMR and IR spectroscopy as well as elemental analysis, this paper demonstrates the reversible exchange of initial oleic acid ligands for octylamine and self-adsorption of oleic acid at NC surfaces. Both processes are incompatible with an X-type binding motif of carboxylic acids as reported for sulfide and selenide NCs. We argue that this behavior stems from the dissociative adsorption of carboxylic acids at the oxide surface. Both proton and carboxylate moieties must be regarded as X-type ligands yielding a combined X2 binding motif that allows for self-adsorption and exchange for L-type ligands.
ABSTRACT
We synthesized HfO2 nanocrystals from HfCl4 using a surfactant-free solvothermal process in benzyl alcohol and found that the resulting nanocrystals could be transferred to nonpolar media using a mixture of carboxylic acids and amines. Using solution (1)H NMR, FTIR, and elemental analysis, we studied the details of the transfer reaction and the surface chemistry of the resulting sterically stabilized nanocrystals. As-synthesized nanocrystals are charge-stabilized by protons, with chloride acting as the counterion. Treatment with only carboxylic acids does not lead to any binding of ligands to the HfO2 surface. On the other hand, we find that the addition of amines provides the basic environment in which carboxylic acids can dissociate and replace chloride. This results in stable, aggregate-free dispersions of HfO2 nanocrystals, sterically stabilized by carboxylate ligands. Moreover, titrations with deuterated carboxylic acid show that the charge on the carboxylate ligands is balanced by coadsorbed protons. Hence, opposite from the X-type/nonstoichiometric nanocrystals picture prevailing in literature, one should look at HfO2/carboxylate nanocrystals as systems where carboxylic acids are dissociatively adsorbed to bind to the nanocrystals. Similar results were obtained with ZrO2 NCs. Since proton accommodation on the surface is most likely due to the high Brønsted basicity of oxygen, our model could be a more general picture for the surface chemistry of metal oxide nanocrystals with important consequences on the chemistry of ligand exchange reactions.
ABSTRACT
During the past decade, extensive research has undeniably improved the formulation and delivery of oral vaccines. Nevertheless, several factors, such as the harsh gastrointestinal environment together with tolerance induction to exogenous antigens, have thus far impeded the optimal effectiveness and clinical application of oral delivery systems. The current study encompasses an initial evaluation of the stability, biocompatibility, and cellular uptake of two promising candidate systems for oral antigen delivery, that is, calcium carbonate- (CP) and mannitol-templated (MP) porous microspheres. Both spray-dried formulations were efficiently internalized by human intestinal epithelial cells (Caco-2 and HT-29) and degraded into phagolysosomal intracellular compartments. In addition, cellular particle uptake and processing significantly up-regulated the expression of (HLA) class-II and costimulatory molecules on intestinal epithelial cells. Even though the high surface-area-to-volume ratio of the microspheres was expected to favor protease access, antigen release was remarkably limited in simulated intestinal fluid and was even absent under gastric conditions. Finally, neither CP nor MP exerted cytotoxicity upon prolonged in vitro incubation with high antigen concentration. Altogether, these data support the potential of CP and MP for oral antigen delivery and motivate the further development of these promising carrier systems in in vivo studies.
Subject(s)
Antigens/metabolism , Biocompatible Materials/metabolism , Drug Delivery Systems/methods , Microspheres , Administration, Oral , Antigens/administration & dosage , Biocompatible Materials/administration & dosage , Caco-2 Cells , Cell Survival/drug effects , Cell Survival/physiology , Drug Stability , HT29 Cells , Humans , Ovalbumin/administration & dosage , Ovalbumin/metabolism , Serum Albumin, Bovine/administration & dosage , Serum Albumin, Bovine/metabolismABSTRACT
In this Article, epitaxial thin films of SrTiO3 were prepared on single crystalline (100) LaAlO3 by an aqueous chemical solution deposition method. By using different chelating agents to stabilize the metal ions in water, the impact of the precursor chemistry on the microstructural and crystalline properties of the films was studied. Thorough investigation of the precursor by means of infrared and Raman spectroscopy as well as thermogravimetric analysis revealed that stable precursors can be obtained in which strontium ions can be either free in the solution or stabilized by one of the chelating agents. This stabilization of strontium ions appeared to be essential in order to obtain single phase SrTiO3 films. Precursors in which Sr(2+) remained as free ions showed SrO microcrystal segregation. Precursors in which both metal ions were stabilized gave rise to strongly textured, dense, and terraced SrTiO3 films, allowing subsequent deposition of YBa2Cu3O7-δ with superior superconducting performances.
ABSTRACT
Periodic Mesoporous Organosilicas (PMOs) were developed in 1999 and are basically ordered templated mesoporous organosilicas, prepared by the combination of a surfactant as template and a silsesquioxane as the organosilica precursor. They were one of the first examples of the so-called "hybrid" organic/inorganic materials. In the years that followed, an amazing variety of functional groups, morphologies and applications has been developed. Some of these high-end applications, like low-k buffer layers in microelectronics, chiral catalysts, chromatographic supports, selective adsorbents and light-harvesting devices, have clearly shown their potential. In this review, we will give a comprehensive overview of all these different functionalities and applications that have been created for Periodic Mesoporous Organosilicas.
Subject(s)
Organosilicon Compounds/chemistry , Particle Size , Porosity , Surface PropertiesABSTRACT
Structural modelling of operando pair distribution function (PDF) data of complex functional materials can be highly challenging. To aid the understanding of complex operando PDF data, this article demonstrates a toolbox for PDF analysis. The tools include denoising using principal component analysis together with the structureMining, similarityMapping and nmfMapping apps available through the online service 'PDF in the cloud' (PDFitc, https://pdfitc.org/). The toolbox is used for both ex situ and operando PDF data for 3â nm TiO2-bronze nanocrystals, which function as the active electrode material in a Li-ion battery. The tools enable structural modelling of the ex situ and operando PDF data, revealing two pristine TiO2 phases (bronze and anatase) and two lithiated Li x TiO2 phases (lithiated versions of bronze and anatase), and the phase evolution during galvanostatic cycling is characterized.
ABSTRACT
Vascular corrosion casting is a method used to visualize the three dimensional (3D) anatomy and branching pattern of blood vessels. A polymer resin is injected in the vascular system and, after curing, the surrounding tissue is removed. The latter often deforms or even fractures the fragile cast. Here, a method is proposed that does not require corrosion, and is based on in situ micro computed tomography (micro-CT) scans. To overcome the lack of CT contrast between the polymer cast and the animals' surrounding soft tissue, hafnium oxide nanocrystals (HfO2 NCs) are introduced as CT contrast agents into the resin. The NCs dramatically improve the overall CT contrast of the cast and allow for straightforward segmentation in the CT scans. Careful design of the NC surface chemistry ensures the colloidal stability of the NCs in the casting resin. Using only 5 m% of HfO2 NCs, high-quality cardiovascular casts of both zebrafish and mice can be automatically segmented using CT imaging software. This allows to differentiate even µ $\umu$ m-scale details without having to alter the current resin injection methods. This new method of virtual dissection by visualizing casts in situ using contrast-enhanced CT imaging greatly expands the application potential of the technique.
ABSTRACT
The issues raised in the comment by Manz are addressed through the presentation of calculated atomic charges for NaF, NaCl, MgO, SrTiO(3), and La(2)Ce(2)O(7), using our previously presented method for calculating Hirshfeld-I charges in solids (Vanpoucke et al., J. Comput. Chem. doi: 10.1002/jcc.23088). It is shown that the use of pseudovalence charges is sufficient to retrieve the full all-electron Hirshfeld-I charges to good accuracy. Furthermore, we present timing results of different systems, containing up to over 200 atoms, underlining the relatively low cost for large systems. A number of theoretical issues are formulated, pointing out mainly that care must be taken when deriving new atoms in molecules methods based on "expectations" for atomic charges.
ABSTRACT
In this work, a method is described to extend the iterative Hirshfeld-I method, generally used for molecules, to periodic systems. The implementation makes use of precalculated pseudopotential-based electron density distributions, and it is shown that high-quality results are obtained for both molecules and solids, such as ceria, diamond, and graphite. The use of grids containing (precalculated) electron densities makes the implementation independent of the solid state or quantum chemical code used for studying the system. The extension described here allows for easy calculation of atomic charges and charge transfer in periodic and bulk systems. The conceptual issue of obtaining reference densities for anions is discussed, and the delocalization problem for anionic reference densities originating from the use of a plane wave basis set is identified and handled.
ABSTRACT
IR and NMR spectroscopy were used to determine the silanol content in the most common mesoporous ordered silicas: MCM-41, MCM-48, SBA-15 and SBA-16. In addition, a spray dried MCM-41 and an ethene bridged PMO are investigated. The results are compared with a commercial chromatographic silica (Nucleosil). The complete distribution of surface and bulk silanols, and of isolated, geminal and vicinal silanols for all these materials is presented. A distinction is made between the total silanol number and the reachable or surface silanol content. The latter is determined by controlled reactions with simple silanes. All mesoporous ordered silicas, and especially the thick walled SBA-type materials and the PMO contain a surprisingly high amount of total silanol sites, albeit that up to 90% of these silanols are buried inside the walls and are not reachable for small silanes.
ABSTRACT
Rare-earth coordination polymers or lanthanide-organic frameworks with hitherto unreported crystal structures have been obtained on the basis of the "light" lanthanides Pr, Nd, Sm, and Eu in combination with terephthalic acid and using a slightly altered literature synthesis procedure. Rietveld refinement has shown that powder XRD patterns of such compounds are largely dominated by the positions of the heavy elements, pointing to isostructural networks for all four terephthalate-based materials. An in-depth luminescence study has been performed on the reported MOFs, showing rare praseodymium and samarium emission in the visible spectrum, aside from the strong europium luminescence and the near-infrared emission from both a terephthalate and 2,5-pyridinedicarboxylate based neodymium-MOF.
ABSTRACT
In this paper, we present an inkjet printing approach suited for the deposition of photocatalytically active, transparent titanium oxide coatings from an aqueous, colloidal suspension. We used a bottom-up approach in which a microwave-assisted hydrothermal treatment of titanium propoxide aqueous solutions in the presence of ethylenediaminetetraacetic acid and triethanolamine was used to create suspensions containing titania nanoparticles. Different inkjet printing set-ups, electromagnetic and piezoelectric driven, were tested to deposit the inks on glass substrates. The presence of preformed titania nanoparticles was expected to make it possible to reduce the heating temperature necessary to obtain the functionality of photocatalysis which can widen the application range of the approach to heat-sensitive substrates. We investigated the crystallinity and size of the obtained nanoparticles by electron microscopy and dynamic light scattering. The rheological properties of the suspensions were evaluated against the relevant criteria for inkjet printing and the jettability was analyzed. The photocatalytic activity of the obtained layers was analyzed by following the decomposition of a methylene blue solution under UV illumination. The influence of the heat treatment temperature on the film roughness, thickness and photocatalytic activity was studied. Good photocatalytic performance was achieved for heat treatments at temperatures as low as 150 °C, introducing the possibility of using this approach for heat-sensitive substrates.
Subject(s)
Crystallization/methods , Membranes, Artificial , Nanostructures/chemistry , Nanostructures/ultrastructure , Titanium/chemistry , Catalysis , Computer Peripherals , Electroplating/methods , Hot Temperature , Light , Macromolecular Substances/chemistry , Macromolecular Substances/radiation effects , Materials Testing , Microwaves , Molecular Conformation/radiation effects , Nanostructures/radiation effects , Particle Size , Surface Properties/radiation effects , Suspensions/radiation effects , Titanium/radiation effects , Water/chemistryABSTRACT
An amino functionalized vanadium-containing Metal Organic Framework, NH(2)-MIL-47, has been synthesized by a hydrothermal reaction in an autoclave. Alternatively, a synthesis route via microwave enhanced irradiation has been optimized to accelerate the synthesis. The NH(2)-MIL-47 exhibits the same topology as MIL-47, in which the V center is octahedrally coordinated. After an exchange procedure in DMF the V(+III) center is oxidized to V(+IV), which is confirmed by EPR and XPS measurements. The CO(2) and CH(4) adsorption properties have been evaluated and compared to MIL-47, showing that both MOFs have an almost similar adsorption capacity and affinity for CO(2). DFT-based molecular modeling calculations were performed to obtain more insight into the adsorption positions for CO(2) in NH(2)-MIL-47. Furthermore our calculated adsorption enthalpies agree well with the experimental values.
ABSTRACT
The title compound, (C(8)H(20)N)[Tb(C(5)HF(6)O(2))(4)], is a tetrakis ß-diketonate complex of hexa-fluoro-acetyl-acetone with terbium(III), and tetra-ethyl-ammonium as the counter-ion. This compound shows typical green terbium(III) luminescence upon excitation at about 335â nm. The coordination geometry around the Tb(III) atom is a slightly distorted square anti-prism. One hexa-fluoro-acetyl-acetone ligand has a disordered CF(3) group [occupancies of 0.575â (4) and 0.425â (4)]. A three-dimensional network is built up by linkage of Tb(III) complexes via C-Hâ¯F inter-actions.
ABSTRACT
The structure of the title compound, tetra-aqua-tris-(nitrato-κ²O,O')praseodymium(III) dihydrate, was redetermined. The structure models derived from the previous determinations [Rumanova et al. (1964 â¶). Kristallografiya, 9, 642-654; Fuller & Jacobson (1976 â¶). Cryst. Struct. Commun.5, 349-352] were confirmed, but now with all H atoms unambiguously located, revealing a complex O-Hâ¯O hydrogen-bonding network, extending throughout the whole structure. In the title compound, the coordination environment of the Pr(III) atom can best be described as a distorted bicapped square anti-prism defined by three bidentate nitrate anions and four water mol-ecules. Additionally, two lattice water mol-ecules are observed in the crystal packing. The title compound is isotypic with several other lanthanide-containing nitrate analogues.