ABSTRACT
The combination of all-inorganic perovskites (PVSKs) and polymers allows for free-standing flexible optoelectronic devices. However, solubility difference of the PVSK precursors and concerns over the compatibility between polymer carriers and PVSKs imply a great challenge to incorporate different kinds of PVSKs into polymer matrices by the same manufacturing process. In this work, PVSK precursors are introduced into poly(2-hydroxyethyl acrylate) (PHEA) hydrogels in sequence, in which the PVSK-gel composites are achieved with full-color emissions by simply varying the precursor species. Moreover, it is found that CsBr has a higher interaction energy with the (111) plane of CsPbBr3 than the (110) plane; thus, the CsPbBr3 crystals with a shape of truncated cube and tetragon are observed during the CsPbBr3-Cs4PbBr6 phase transition over time. The PVSK-gel composites feature excellent bendability, elasticity, and stretchable deformation (tensile strain > 500%), which allows for 3D printing emissive customized stereoscopic architectures with shape-memory features.
ABSTRACT
Pure-phase α-FAPbI3 quantum dots (QDs) are the focus of an increasing interest in photovoltaics due to their superior ambient stability, large absorption coefficient, and long charge-carrier lifetime. However, the trap states induced by the ligand-exchange process limit the photovoltaic performances. Here, a simple post treatment using methylamine thiocyanate is developed to reconstruct the FAPbI3 -QD film surface, in which a MAPbI3 capping layer with a thickness of 6.2 nm is formed on the film top. This planar perovskite heterojunction leads to a reduced density of trap-states, a decreased band gap, and a facilitated charge carrier transport. As a result, a record high power conversion efficiency (PCE) of 16.23% with negligible hysteresis is achieved for the FAPbI3 QD solar cell, and it retains over 90% of the initial PCE after being stored in ambient environment for 1000 h.
ABSTRACT
Given the advantages of high power conversion efficiencies (PCEs), antisolvent-step free production, and suitability for device production in ambient conditions, perovskite solar cells (PSCs) based on ionic-liquid solvents have attained particular research interest. To further improve device performance, light management could be optimized to increase light harvesting in the perovskite layer. Here, ordered honeycomb-like TiO2 (Hc-TiO2 ) structures with a periodicity of around 450â nm were fabricated through a sacrificial template method. With this photonic crystal structure, the control to light flow and the confinement effect for perovskite growth were achieved simultaneously in the Hc-TiO2 , leading to improved light absorption as well as preferred crystal orientation. Furthermore, a reduced trap-state density and a well-aligned energy level induced by the perovskite/pore interlayer facilitated the charge-carrier extraction from the perovskite layer to electron transport layer. As a result, the structured devices performed better than the planar cells. And the angular dependent J-V sweeps show that the structured device reserved 76 % of its initial short circuit current density (Jsc ), whereas the planar cell showed more than a half loss under the incident light of 40°, demonstrating a reduced downward trend in Jsc with the presence of photonic crystal structures. This occurrence also suggests that the structured PSCs in this work have a high tolerance to optical path changes.