Assessing the impact of river connectivity on fish biodiversity in the Yangtze River Basin using a multi-index evaluation framework.

The Yangtze River Basin, the world's third-largest river basin and a hot spot for global biodiversity conservation, is facing biodiversity crisis caused by reduced river connectivity. The deterioration arises from four dimensions: longitudinal, lateral, vertical and temporal. However, limited research has quantified the spatiotemporal connectivity of the Yangtze River Basin and further evaluated the consequent impact on fish biodiversity. In our study, a multi-index evaluation framework was developed to assess the variations in the four-dimensional connectivity of the Yangtze River Basin from 1980 to 2020, and fish biodiversity affected by reduced connectivity was detected by environmental DNA metabarcoding. Our results showed that the Yangtze River Basin suffers from a pronounced connectivity reduction, with 67% of assessed rivers experiencing deteriorated connectivity in recent years. The lost fish biodiversity along the river reaches with the worst connectivity was likely attributed to the construction of hydropower plants. The headwaters and the downstreams of most hydropower plants had a higher fish biodiversity compared with reservoirs. The free-flowing reaches in the downstream of the lowest hydropower station, had higher lotic fish abundance compared with that in the upstream. As for the entire Yangtze River Basin, 67% of threatened fish species, with 70% endemic species, were threatened by reduced river connectivity. Our result indicates that the massive loss of river connectivity changes the spatiotemporal patterns of fish community and threatens protected fish. More effective measures to restore the populations of affected fish in rivers with reduced river connectivity are required.

Numerical Study on Chemical Kinetic Characteristics of Counterflow Diffusion Flame Extinction of Methane/Ammonia/Air Flame under High Pressure or Air Preheating Temperature.

Green ammonia has become an increasingly popular fuel in recent years because of its combustion process without carbon oxide release. Adding ammonia to methane fuel for co-combustion has become one of the important research topics in the current combustion field. In the present study, the CH4/NH3/Air counterflow diffusion flame was taken as the research object, and Chemkin-2019 R3 software was used to explore and analyze the flame extinction limit and chemical kinetics characteristics under different ammonia mixing ratios, initial pressures, and air preheating temperatures. It was obtained that the flame extinction stretch rate was decreased by increasing the NH3 mole fraction in the CH4/NH3 mixed fuel. The increase in pressure or air preheating temperature would accelerate the chemical reaction rate of each component in the combustion process, increase the flame extinction limit, and counteract the "stretching effect" of the flame, thus restraining the flame extinguishing phenomenon. The results of a path analysis show that the formation and consumption of OH had an important influence on flame extinction in the chain reaction. The net reaction rate of OH increases with increasing the initial pressure or air preheating temperature, which leads to an increase in flame intensity, combustion stability, and the extinction limit. Furthermore, the function curve between the reaction influences the RIF factor and the stretch rate of the first-to-ten reactions, affected by the heat release of flame combustion, was drawn and quantitatively analyzed. Eventually, a sensitivity analysis of the flame under different working conditions was completed, which found that promoting the forward reaction R39 H + O2<=>O + OH also promotes the positive combustion as a whole when the flame was near extinction. The sensitivity coefficient of R39 in the CH4/NH3/Air flame increases with the growing initial pressure. The increasing air preheating temperature was capable of switching the reaction of R248 NH2 + OH<=>NH + H2O in the CH4/NH3/Air flame from an inhibiting reaction to a promoting reaction, while decreasing the sensitivity coefficient of inhibiting the forward reaction R10 O + CH3<=>H + CH2O, R88 OH + HO2<=>O2 + H2O, and R271 H + NO + M<=>HNO + M. Thus, the inhibition effect of flame extinction was weakened, and the positive progress of combustion was promoted.

A retrospective study of occlusal reconstruction in patients with old jaw fractures and dentition defects.

PURPOSE: This study evaluated the methods and clinical effects of multidisciplinary collaborative treatment for occlusal reconstruction in patients with old jaw fractures and dentition defects. METHODS: Patients with old jaw fractures and dentition defects who underwent occlusal reconstruction at the Third Affiliated Hospital of Air Force Military Medical University from January 2018 to December 2022 were enrolled. Clinical treatment was classified into 3 phases. In phase I, techniques such as orthognathic surgery, microsurgery, and distraction osteogenesis were employed to reconstruct the correct 3-dimensional (3D) jaw position relationship. In phase II, bone augmentation and soft tissue management techniques were utilized to address insufficient alveolar bone mass and poor gingival soft tissue conditions. In phase III, implant-supported overdentures or fixed dentures were used for occlusal reconstruction. A summary of treatment methods, clinical efficacy evaluation, comparative analysis of imageological examinations, and satisfaction questionnaire survey were utilized to evaluate the therapeutic efficacy in patients with traumatic old jaw fractures and dentition defects. All data are summarized using the arithmetic mean ± standard deviation and compared using independent sample t-tests. RESULTS: In 15 patients with old jaw fractures and dentition defects (an average age of 32 years, ranging from 18 to 53 years), there were 7 cases of malocclusion of single maxillary fracture, 6 of malocclusion of single mandible fracture, and 2 of malocclusion of both maxillary and mandible fractures. There were 5 patients with single maxillary dentition defects, 2 with single mandibular dentition defects, and 8 with both maxillary and mandibular dentition defects. To reconstruct the correct 3D jaw positional relationship, 5 patients underwent Le Fort I osteotomy of the maxilla, 3 underwent bilateral sagittal split ramus osteotomy of the mandible, 4 underwent open reduction and internal fixation for old jaw fractures, 3 underwent temporomandibular joint surgery, and 4 underwent distraction osteogenesis. All patients underwent jawbone augmentation, of whom 4 patients underwent a free composite vascularized bone flap (26.66%) and the remaining patients underwent local alveolar bone augmentation. Free gingival graft and connective tissue graft were the main methods for soft tissue augmentation (73.33%). The 15 patients received 81 implants, of whom 11 patients received implant-supported fixed dentures and 4 received implant-supported removable dentures. The survival rate of all implants was 93.82%. The final imageological examination of 15 patients confirmed that the malocclusion was corrected, and the clinical treatment ultimately achieved occlusal function reconstruction. The patient satisfaction questionnaire survey showed that they were satisfied with the efficacy, phonetics, aesthetics, and comfort after treatment. CONCLUSION: Occlusal reconstruction of old jaw fractures and dentition defects requires a phased sequential comprehensive treatment, consisting of 3D spatial jaw correction, alveolar bone augmentation and soft tissue augmentation, and implant-supported occlusal reconstruction, achieving satisfactory clinical therapeutic efficacy.

Three-dimensional evaluation of dental characteristics in patients with Cleidocranial dysplasia.

BACKGROUND: Cleidocranial dysplasia (CCD) is an autosomal dominant hereditary disorder. Besides skeletal abnormalities, CCD is often associated with dental complications, such as multiple supernumerary teeth and permanent teeth impaction or delayed eruption. METHODS: Supernumerary teeth of axial, sagittal and coronal CBCT view was characterized in detail and 3D image reconstruction was performed. Number and location of teeth, morphology of supernumerary teeth, positional relationship between supernumerary and adjacent permanent teeth, direction of supernumerary teeth in CCD patients were analyzed. RESULTS: The mean age of the 3 CCD patients in this study was 16.7 years. Among 36 supernumerary teeth, the majority of them were identified as apical side located and lingual side located. Normal orientation was the most common type in this study, followed by sagittal orientation, and horizontal orientation. Horizontal orientation teeth were all distributed in the mandible. Supernumerary teeth exhibited significantly shorter crown and dental-root lengths, as well as smaller crown mesiodistal and buccolingual diameters (P < 0.01). There was no difference in the number of supernumerary teeth between the maxilla and mandible, and the premolars region had the largest number of supernumerary teeth and the incisor region had the smallest number. CONCLUSIONS: This study compares number and location of teeth, morphology of supernumerary teeth, positional relationship between supernumerary and adjacent permanent teeth and direction of supernumerary teeth, this study also provides a reference for the comprehensive evaluation of CCD patients before surgery.

The role of voltage-gated calcium channel α2δ-1 in the occurrence and development in myofascial orofacial pain.

Patients who suffer from myofascial orofacial pain could affect their quality of life deeply. The pathogenesis of pain is still unclear. Our objective was to assess Whether Voltage-gated calcium channel α2δ-1(Cavα2δ-1) is related to myofascial orofacial pain. Rats were divided into the masseter tendon ligation group and the sham group. Compared with the sham group, the mechanical pain threshold of the masseter tendon ligation group was reduced on the 4th, 7th, 10th and 14th day after operation(P < 0.05). On the 14th day after operation, Cavα2δ-1 mRNA expression levels in trigeminal ganglion (TG) and the trigeminal spinal subnucleus caudalis and C1-C2 spinal cervical dorsal horn (Vc/C2) of the masseter tendon ligation group were increased (PTG=0.021, PVc/C2=0.012). Rats were divided into three groups. On the 4th day after ligating the superficial tendon of the left masseter muscle of the rats, 10 ul Cavα2δ-1 antisense oligonucleotide, 10 ul Cavα2δ-1 mismatched oligonucleotides and 10 ul normal saline was separately injected into the left masseter muscle of rats in Cavα2δ-1 antisense oligonucleotide group, Cavα2δ-1 mismatched oligonucleotides group and normal saline control group twice a day for 4 days. The mechanical pain threshold of the Cavα2δ-1 antisense oligonucleotides group was higher than Cavα2δ-1 mismatched oligonucleotides group on the 7th and 10th day after operation (P < 0.01). After PC12 cells were treated with lipopolysaccharide, Cavα2δ-1 mRNA expression level increased (P < 0.001). Cavα2δ-1 may be involved in the occurrence and development in myofascial orofacial pain.

Effects of cascade dams on the occurrence and distribution of microplastics in surface sediments of Wujiang river basin, Southwestern China.

The influence of cascade dams on the migration of microplastics (MPs) was conducted by analyzing the spatial distribution of MPs in sediments of the Wujiang river basin (Wujiang river basin) in Southwest China. The results showed that the abundance of MPs in Wujiang river basin sediments ranged from 310 to 2620 items/kg dw (mean: 1354 items/kg dw, a high level compared with aquatic sediments worldwide). The main chemical components of these MPs were polypropylene and polyethylene. High abundance of MPs in tributary sediments suggested that tributary inputs contributed to the main stream and reservoirs. Statistical analysis showed that gross domestic product (GDP) and the basin area of cascade reservoirs, rather than hydraulic retention time and reservoir age, were the dominating factors in the distribution of MPs in the Wujiang river basin. The accumulation of MPs in cascade reservoirs implied the interception effect of cascade dams. The rapid development of cascade dam systems and the interception effect of dams should be taken into account when predicting the flux of MPs from rivers to the ocean. Heavy metals found on the surface of the MPs showed the compound pollution of MPs and heavy metals in dammed rivers and cascade reservoirs. Our results deepen the understanding of the migration of MPs in rivers alongside intensive cascade hydropower development.

Removal of microcystin (MC-LR) in constructed wetlands integrated with microbial fuel cells: Efficiency, bioelectricity generation and microbial response.

Microcystins (MCs) pollution caused by cyanobacteria harmful blooms (CHBs) has posed short- and long-term risks to aquatic ecosystems and public health. Constructed wetlands (CWs) have been verified as an effective technology for eutrophication but the removal performance for MCs did not achieve an acceptable level. CWs integrated with microbial fuel cell (MFC-CWs) were developed to intensify the nutrient and Microcystin-LR (MC-LR) removal efficiencies in this study. The results indicated that closed-circuit MFC-CWs (T1) exhibited a better NO3--N, NH4+-N, TP and MC-LR removal efficiency compared to that of open-circuit MFC-CWs (CK, i.e., traditional CWs). Therein, a MC-LR removal efficiency of greater than 95% was observed in both trials in T1. The addition of sponge iron to the anode layer of MFC-CWs (T2) improved only the NO3--N removal and efficiency bioelectricity generation performance compared to T1, and the average effluent MC-LR concentration of T2 (1.14 µg/L) was still higher than the provisional limit concentration (1.0 µg/L). The microbial community diversity of T1 and T2 was simplified compared to CK. The relative abundance of Sphingomonadaceae possessing the degradation capability for MCs increased in T1, which contributed to the higher MC-LR removal efficiency compared to CK and T2. While the relative abundance of electrochemically active bacteria (EAB) (i.e., Desulfuromonadaceae and Desulfomicrobiaceae) in the anode of T2 was promoted by the addition of sponge iron. Overall, this study suggests that integrating MFC into CWs provides a feasible intensification strategy for eutrophication and MCs pollution control.

Review on Health Impacts from Domestic Coal Burning: Emphasis on Endemic Fluorosis in Guizhou Province, Southwest China.

Endemic fluorosis in Guizhou Province, Southwest China was firstly reported by Lyth in 1946 and was extensively concerned since the early 1980s. Initially, the pathological cause of endemic fluorosis in Guizhou Province was instinctively ascribed to the drinking water. However, increasing evidences pointed that the major exposure route of fluorine for the local residents is via the roasted foodstuffs, especially the roasted pepper and corn. Source of fluorine in roasted foodstuffs was once blamed on the local coal and subsequently imputed to clay mixed in the coal. In fact, both are probably the source. Geogenic fluorine concentration in soil and clay is indeed high in Guizhou Province, but is not likely to be the direct cause for endemic fluorosis. The real culprit for endemic fluorosis in Guizhou Province is the unhealthy lifestyle of the local residents, who usually roasted their foodstuffs using local coal or briquettes (a mixture of coal and clay), resulting in the elevated fluorine in roasted foodstuffs. Nowadays, endemic fluorosis in Guizhou Province has substantially mitigated. Nevertheless, millions of confirmed cases of dental fluorosis remain left. In addition to endemic fluorosis, other health problems associated with domestic coal burning may also exist, because of the enrichment of toxic/harmful elements in the local coal. It is necessary to determine how serious the situation is and find out the possible solution. As people in other developing countries may suffer from similar health issues, same health issues around the world deserve more attention.

Method for phosphate oxygen isotopes analysis in water based on in situ enrichment, elution, and purification.

The phosphate oxygen isotope (δ18OP) ratio has been proven to be an effective tool to trace the sources and biogeochemical cycles of phosphorus (P) in aquatic ecosystems. However, the enrichment of phosphate (PO4) and the removal of impurities are quite complex and easy to cause PO4 loss in current δ18OP analytical methods. Moreover, the δ18OP value obtained by the commonly-used instantaneous sampling method is more of the instantaneous information of P, which is accidental or uncertain for accurate identification of the P source. In this study, a new method of in situ enrichment, elution, and purification of PO4 (ISEEP) was developed for δ18OP analysis in waters. This method utilized a PO4 binding phase (Zr-Oxide gel) to selectively in situ adsorb PO4 in water and exhibited an adsorption capacity per unit area of up to 789.3 µg P/cm2. The PO4 on the gel was eluted easily with a 1 M NaOH solution. More than 99.7% of the common anions, cations, and dissolved organic matter (DOM), as well as more than 90% of the trace elements were removed synchronously after adsorption and elution of PO4. The recovery rate of PO4 in the whole procedure was as high as 92.8%. The XRD and SEM examinations showed that the ISEEP can obtain high-purity Ag3PO4 solid for the δ18OP measurement. The reliability of the ISEEP method is confirmed by the measured δ18OP value and standard deviation of parallel samples from different types of natural waters obtained by both the ISEEP and the current popular McLaughlin (2004) method. It provides a good prospect of this new method for tracing the P sources and their biogeochemical cycling in aquatic ecosystems.

The Effects of CO2 Additional on Flame Characteristics in the CH4/N2/O2 Counterflow Diffusion Flame.

The effects (chemical, thermal, transport, and radiative) of CO2 added to the fuel side and oxidizer side on the flame temperature and the position of the flame front in a one-dimensional laminar counterflow diffusion flame of methane/N2/O2 were studied. Overall CO2 resulted in a decrease in flame temperature whether on the fuel side or on the oxidizer side, with the negative effect being more obvious on the latter side. The prominent effects of CO2 on the flame temperature were derived from its thermal properties on the fuel side and its radiative properties on the oxidizer side. The results also highlighted the differences in the four effects of CO2 on the position of the flame front on different sides. In addition, an analysis of OH and H radicals and the heat release rate of the main reactions illustrated how CO2 affects the flame temperature.

How Does the Remodeling Capacity of Children Affect the Morphologic Changes of Fractured Mandibular Condylar Processes After Conservative Treatment?

PURPOSE: Our aim was to explore how the remodeling capacity of children's mandibular condyles affected the morphologic changes of fractured condyles after conservative treatment. PATIENTS AND METHODS: A retrospective study was designed and performed in children and adult patients with mandibular condylar fractures. Computed tomographic imaging was reviewed for all patients to analyze the morphologic changes and risk factors for traumatic temporomandibular joint ankylosis. RESULTS: From 2012 to 2017, 81 patients younger than 18 years and 10 adult patients accepted treatment in our department. There were 23 young patients (aged <18 years) with 41 fractured condyles and 10 adults with 14 fractured condyles who were managed with conservative treatment, and the morphologic changes were analyzed with the aid of Mimics 19.0 software (Materialise, Leuven, Belgium). The fractured condyles with intracapsular fractures completed the remodeling progress within 3 to 4 months, and condyles with neck or base fractures took more than 6 months. In contrast, we found no remodeling in adults. Of the 81 young patients, 3 had temporomandibular joint ankylosis. Each case was analyzed regarding the risk factors, morphologic changes, and remodeling features. Finally, the common points of these cases were summarized. CONCLUSIONS: The shape of fractured condyles can be remodeled after conservative treatment in young patients instead of bony fusion between the fractured fragments compared with adult patients.

Bound PAHs in Sediment and Related Environmental Significance.

Extractable polycyclic aromatic hydrocarbons (EPAHs) and bound PAHs (BPAHs) were measured in a sediment core using conventional Soxhlet extraction and a more astringent extraction method, with the objectives of determining the influence of BPAHs on the historical reconstruction of PAHs and exploring the formation of BPAHs and long-term behaviors of PAHs in sediment. The results indicated that the formation of BPAHs was clearly sediment-depth and molecular-size dependent. BPAHs represents an important portion of PAHs in sediment and cannot be extracted by conventional Soxhlet extraction. This suggests that the previously developed vertical profile of PAHs is not the real chronology of PAHs and the plausible interpretation derived from the sedimentary records of PAHs needs reexamination. Based on the previous findings, a biphase model was proposed and the formation of BPAHs was predicted. Due to the different nature of geosorbents in sediment, redistribution of PAHs among these geosorbents logically leads to the formation of BPAHs and is kinetically favorable for smaller molecular PAHs. This is consistent with the obtained results. Many factors may influence the formation of BPAHs, such as the physicochemical structure of sediment and environmental conditions. There is still a long way to reveal the thermodynamical characteristics in action during the formation of BPAHs.

Characteristics of Bacterial Community Structure and Function in Artificial Soil Prepared Using Red Mud and Phosphogypsum.

The preparation of artificial soil is a potential cooperative resource utilization scheme for red mud and phosphogypsum on a large scale, with a low cost and simple operation. The characteristics of the bacterial community structure and function in three artificial soils were systematically studied for the first time. Relatively rich bacterial communities were formed in the artificial soils, with relatively high abundances of bacterial phyla (e.g., Cyanobacteria, Proteobacteria, Actinobacteriota, and Chloroflexi) and bacterial genera (e.g., Microcoleus_PCC-7113, Rheinheimera, and Egicoccus), which can play key roles in various nutrient transformations, resistance to saline-alkali stress and pollutant toxicity, the enhancement of various soil enzyme activities, and the ecosystem construction of artificial soil. There were diverse bacterial functions (e.g., photoautotrophy, chemoheterotrophy, aromatic compound degradation, fermentation, nitrate reduction, cellulolysis, nitrogen fixation, etc.), indicating the possibility of various bacteria-dominated biochemical reactions in the artificial soil, which can significantly enrich the nutrient cycling and energy flow and enhance the fertility of the artificial soil and the activity of the soil life. The bacterial communities in the different artificial soils were generally correlated with major physicochemical factors (e.g., pH, OM, TN, AN, and AP), as well as enzyme activity factors (e.g., S-UE, S-SC, S-AKP, S-CAT, and S-AP), which comprehensively illustrates the complexity of the interaction between bacterial communities and environmental factors in artificial soils, and which may affect the succession direction of bacterial communities, the quality of the artificial soil environment, and the speed and direction of the development and maturity of the artificial soil. This study provides an important scientific basis for the synergistic soilization of two typical industrial solid wastes, red mud and phosphogypsum, specifically for the microbial mechanism, for the further evolution and development of artificial soil prepared using red mud and phosphogypsum.

Simulation of red mud/phosphogypsum-based artificial soil engineering applications in vegetation restoration and ecological reconstruction.

Red mud and phosphogypsum are two of the most typical bulk industrial solid wastes. How they can be efficiently recycled as resources on a large scale and at low costs has always been a global issue that urgently needs to be solved. By constructing a small-scale test site and preparing two types of artificial soils using red mud and phosphogypsum, this study simulated their engineering applications in vegetation restoration and ecological reconstruction. According to the results of this study, the artificial soils contained a series of major elements (e.g. O, Si, Al, Fe, Ca, Na, K, and Mg) similar to those in common natural soil, and preliminarily possessed basic physicochemical properties (pH, moisture, organic matter, and cation exchange capacity), main nutrient conditions (nitrogen, phosphorus and potassium), and biochemical characteristics that could meet the demands of plant growth. A total of 18 different types of adaptable plants (e.g. wood, herbs, flowers, succulents, etc) grew in the test sites, indicating that the artificial soils could be used for vegetation greening and landscaping. The preliminary formation of microbial (fungal and bacterial) community diversity and the gradually enriched arthropod community diversity reflected the constantly improving quality of the artificial soils, suggesting that they could be used for the gradual construction of artificial soil micro-ecosystems. Overall, the artificial soils provided a feasible solution for the large-scale, low-cost, and highly efficient synergistic disposal of red mud and phosphogypsum, with enormous potential for future engineering applications. They are expected to be used for vegetation greening, landscaping, and ecological environment improvement in tailings, collapse, and soil-deficient areas, as well as along municipal roads.

Manganese(III) dominants the mobilization of phosphorus in reducing sediments: Evidence from Aha reservoir, Southwest China.

Eutrophication has become one of the greatest threats to aquatic ecosystems. The release of phosphorus (P) from sediments exerts a critical role on eutrophication level. Both manganese (Mn) and iron (Fe), sensitive to redox conditions, own strong affinity for P. Numerous works have demonstrated that Fe was a key factor to drive P cycle in sediments. However, the role of Mn on P mobilization remains largely unexplored. Herein, the mechanism of P mobilization driven by Mn were investigated in a seasonal anoxic reservoir. Diffusive gradients in thin films (DGT) results, from both field investigations and laboratory incubations, showed P was synchronously distributed and significantly positive correlated (r2 ≥ 0.40, p < 0.01) with Mn, suggested that P cycle was associated with Mn. X-ray photoelectron spectroscopy (XPS) results showed that in the outer layers at the top 1 cm sediment pellet the contents of Mn and P occurred significantly synchronize changed, while that of Fe remains virtually unchanged when oxygen conditions changed. This demonstrated that Mn is likely to be the key factor affect P cycle. Most importantly, the relative content of Mn(III) changed the most (≈20 %) interpreted that Mn(III) is the key Mn species dominants the P mobilization. Furthermore, Dual-Beam scanning electron microscope (DB-SEM) maps clearly showed the co-enrichment of P and Mn in oxic sediments, confirmed P was mainly hosted by Mn minerals. In contrast, the random distributions and weak or negative correlations between P and Fe implied that P cycle was decouple with Fe, this resulted from that Fe was almost deposited as inert Fe fractions (>99.2 %) in reducing sediments. This study significantly expanded our knowledge on the geochemical behavior of P influenced by Mn in aquatic sediments.

Evaluating impacts of climate and management on reservoir water quality using environmental fluid dynamics code.

Climate change and human interference, notably nutrient input, affect the water quality. Nitrogen (N) and phosphorus (P) are pivotal in managing eutrophication. This study investigated the effects of water dynamics and chemical constituents on water quality in Hongfeng Lake, a typical weakly stratified reservoir suffering from algae blooms in Southwest China, using the Environmental Fluid Dynamics Code. Leveraging climate, hydrological, and water quality data, we constructed, calibrated, and validated the temperature-hydrodynamics-water quality-sediment model. Various scenarios were analyzed, including wind speed, air temperature, solar radiation, rainfall, water discharge, N and P external input, and internal release. The findings revealed that no rain and warming increased trophic state index (TSI) and chlorophyll-a (Chl-a) concentration, and no solar radiation initially elevated nitrate concentration, followed by an increase in ammonium concentration. Besides, no solar radiation and changes in rainfall significantly increased total phosphate concentration. The management scenarios of N and P reduction, halving tributary, and mainstream flow scenarios improved water quality and reduced eutrophication. The wind speed under the N and P reduced scenarios showed that a doubling in wind led to increased concentrations of the particulate organic matter, Chl-a, and dissolved oxygen, alongside decreased ammonium and nitrate, while TSI exhibited minimal change. However, 5- and 10-times wind speed scenarios amplified TSI in shallow water, potentially due to a substantial rise in internal nutrient release. The degradation trend observed in drinking water quality amid climate change (warming and flooding) raises concerns regarding health-related risks. These simulations provided the quantified influence of climate change and environmental management strategies on water quality in the weakly stratified reservoir, notably highlighting the looming threat of exacerbated eutrophication due to warming, necessitating more stringent N and P reduction measures compared to current practices.

A novel pretreatment method for analysis the oxygen isotopic compositions of inorganic phosphorus pools in freshwater sediment.

Identifying the sources and cycling of phosphorus (P) is particularly important for formulating effective P management strategies in inland water. The oxygen isotopic compositions of phosphate (δ18OP) are recognized as a promising tool to solve this problem. However, the application of δ18OP in freshwater sediment is currently constrained by multiple difficulties. In this study, we presented a novel pretreatment method for δ18OP analysis of sediment inorganic P pools. Our results showed that the new method has advantages of simple operation, less time-consuming, and high P recovery rates. Specifically, we replaced the traditional Mg-induced co-precipitation (MAGIC) method by introducing Zr-Oxides gels with high selective adsorption function for phosphate. This made subsequent processing simpler and reduced the time consumption to ∼10 days, and the range of P recovery rates were from 88 % to 104 %. Furthermore, we emphasized the necessity of vacuum roasting following lyophilized Ag3PO4 to eliminate residual oxygen-containing impurities (e.g., NO3-, Ag2O, and organic matter). Additionally, evidences from microscopy and spectroscopy confirmed that this method ultimately yielded high-purity Ag3PO4 with the Ag:P molar ratios of 3.35:1. Importantly, combining direct synthesis Ag3PO4 between KH2PO4 and AgNO3 with the Ag3PO4 obtained by the method revealed no stark oxygen isotopic fractionation of phosphate during the pretreatment processes. The newly established δ18OP pretreatment methods here can also be extended to broader studies of the biogeochemical cycling of P in aquatic ecosystems, potentially advancing the understanding of the global P cycle.

Extensive abundances and characteristics of microplastic pollution in the karst hyporheic zones of urban rivers.

Cities are potential areas for microplastic pollution due to large-scale production and the use of plastic products. The karst ecosystem in southwestern China is fragile, and pollutants are more likely to be transported over long distance, resulting in higher pollution risks. Understanding the abundance and composition of microplastics in karst urban water systems is crucial for microplastic pollution management in a karst region. This study investigates the abundances and characteristics of microplastics typically found in river sediments in 10 cities in karst regions of Southwest China. The results show that the abundance of microplastics in sediments ranged from 800 items·kg-1 to 4400 items·kg-1, with an average of 2273 ± 775 items·kg-1 (n = 30), indicating high abundance. Polyamide (PA) was the most common plastic polymer types in all sediment samples. The abundance of microplastics in the downstream (2527 ± 698 items·kg-1) was higher than that in the midstream (2350 ± 999 items·kg-1) and upstream areas (1943 ± 370 items·kg-1), indicating a gradual accumulation effect in the karst water systems. Microplastic abundance in cities (2119 ± 838 items·kg-1) was lower than in counties (2427 ± 671 items·kg-1). No significant correlation was found between microplastic abundance in rivers of urban areas and the level of regional population and economy, but significantly negatively correlated with the efficiency of urban sewage treatment. The results obtained from this study provided insights into the management of microplastic pollution in urban river of a karst region.

Sedimentary records of polycyclic aromatic hydrocarbons from three enclosed lakes in China: Response to energy structure and economic development.

Historical polycyclic aromatic hydrocarbon (PAH) pollution was explored through the sedimentary records of three lakes: Huguangyan Maar Lake (HGY) in South China, Mayinghai Lake (MYH) in North China, and Sihailongwan Lake (SHLW) in Northeast China. In these three lakes, the PAH concentrations in sediments are still rising, showing the different trend to lakes in developed countries. PAH pollution in South China occurred from 1850, much earlier than the increases since 1980 observed in North and Northeast China. The temporal trends of PAH concentrations in lake sediments are highly correlated with local economic development. Spatially, although the region where HGY is located has the highest gross domestic product, higher fluxes of PAHs were found in MYH sediments, indicating that atmospheric PAH pollution in North China might be more serious, and that PAH pollution is not fully correlated with economic development. Source analysis suggested that the PAHs in lake sediments are mainly derived from oil leaks, coal and biomass combustion, vehicle emissions, and diagenesis. Positive matrix factorization (PMF) model revealed that the contribution of vehicle emissions and coal combustion to PAHs has increased significantly in the past 40 years. Benzo(a)pyrene equivalent (BaPE) in the surface sediments of MYH and SHLW were similar and higher than in HGY. In HGY, vehicle emissions posed the highest toxic risk, followed by coal combustion. However, in MYH, the toxicity risk of vehicle emissions was close to that of coal and biomass combustion due to the highly developed coal industry in Shanxi Province. In SHLW, the contribution of fossil fuel combustion to BaPE was significantly higher than that of biomass combustion. This study provides important information for understanding PAH pollution affected by anthropogenic activities in the Anthropocene and provides a scientific basis for formulating PAH pollution control strategies.

Rapid Detection of Streptococcus mutans Using an Integrated Microfluidic System with Loop-Mediated Isothermal Amplification.

Streptococcus mutans is the primary causative agent of caries, which is one of the most common human diseases. Thus, rapid and early detection of cariogenic bacteria is critical for its prevention. This study investigated the combination of loop-mediated isothermal amplification (LAMP) and microfluid technology to quantitatively detect S. mutans. A low-cost, rapid microfluidic chip using LAMP technology was developed to amplify and detect bacteria at 2.2-2.2 × 106 colony-forming units (CFU)/ml and its detection limits were compared to those of standard polymerase chain reaction. A visualization system was established to quantitatively determine the experimental results, and a functional relationship between the bacterial concentration and quantitative results was established. The detection limit of S. mutans using this microfluidic chip was 2.2 CFU/ml, which was lower than that of the standard approach. After quantification, the experimental results showed a good linear relationship with the concentration of S. mutans, thereby confirming the effectiveness and accuracy of the custom-made integrated LAMP microfluidic system for the detection of S. mutans. The microfluidic system described herein may represent a promising simple detection method for the specific and rapid testing of individuals at risk of caries.