Isolation and Identification of Salinity-Tolerant Rhizobia and Nodulation Phenotype Analysis in Different Soybean Germplasms.

Increasing the soybean-planting area and increasing the soybean yield per unit area are two effective solutions to improve the overall soybean yield. Northeast China has a large saline soil area, and if soybeans could be grown there with the help of isolated saline-tolerant rhizobia, the soybean cultivation area in China could be effectively expanded. In this study, soybeans were planted in soils at different latitudes in China, and four strains of rhizobia were isolated and identified from the soybean nodules. According to the latitudes of the soil-sampling sites from high to low, the four isolated strains were identified as HLNEAU1, HLNEAU2, HLNEAU3, and HLNEAU4. In this study, the isolated strains were identified for their resistances, and their acid and saline tolerances and nitrogen fixation capacities were preliminarily identified. Ten representative soybean germplasm resources in Northeast China were inoculated with these four strains, and the compatibilities of these four rhizobium strains with the soybean germplasm resources were analyzed. All four isolates were able to establish different extents of compatibility with 10 soybean resources. Hefeng 50 had good compatibility with the four isolated strains, while Suinong 14 showed the best compatibility with HLNEAU2. The isolated rhizobacteria could successfully establish symbiosis with the soybeans, but host specificity was also present. This study was a preliminary exploration of the use of salinity-tolerant rhizobacteria to help the soybean nitrogen fixation in saline soils in order to increase the soybean acreage, and it provides a valuable theoretical basis for the application of saline-tolerant rhizobia.

Strain Effects in Ru-Au Bimetallic Aerogels Boost Electrocatalytic Hydrogen Evolution.

To improve the sluggish kinetics of the hydrogen evolution reaction (HER), a key component in water-splitting applications, there is an urgent desire to develop efficient, cost-effective, and stable electrocatalysts. Strain engineering is proving an efficient strategy for increasing the catalytic activity of electrocatalysts. This work presents the development of Ru-Au bimetallic aerogels by a simple one-step in situ reduction-gelation approach, which exhibits strain effects and electron transfer to create a remarkable HER activity and stability in an alkaline environment. The surface strain induced by the bimetallic segregated structure shifts the d-band center downward, enhancing catalysis by balancing the processes of water dissociation, OH* adsorption, and H* adsorption. Specifically, the optimized catalyst shows low overpotentials of only 24.1 mV at a current density of 10 mA cm-2 in alkaline electrolytes, surpassing commercial Pt/C. This study can contribute to the understanding of strain engineering in bimetallic electrocatalysts for HER at the atomic scale.

Diagnostic strategy of metagenomic next-generation sequencing for gram negative bacteria in respiratory infections.

OBJECTIVE: This study aims to identify the most effective diagnostic method for distinguishing pathogenic and non-pathogenic Gram-negative bacteria (GNB) in suspected pneumonia cases using metagenomic next-generation sequencing (mNGS) on bronchoalveolar lavage fluid (BALF) samples. METHODS: The effectiveness of mNGS was assessed on BALF samples collected from 583 patients, and the results were compared with those from microbiological culture and final clinical diagnosis. Three interpretational approaches were evaluated for diagnostic accuracy. RESULTS: mNGS outperformed culture significantly. Among the interpretational approaches, Clinical Interpretation (CI) demonstrated the best diagnostic performance with a sensitivity of 87.3%, specificity of 100%, positive predictive value of 100%, and negative predictive value of 98.3%. CI's specificity was significantly higher than Simple Interpretation (SI) at 37.9%. Additionally, CI excluded some microorganisms identified as putative pathogens by SI, including Haemophilus parainfluenzae, Haemophilus parahaemolyticus, and Klebsiella aerogenes. CONCLUSION: Proper interpretation of mNGS data is crucial for accurately diagnosing respiratory infections caused by GNB. CI is recommended for this purpose.

Neuroimmune modulating and energy supporting nanozyme-mimic scaffold synergistically promotes axon regeneration after spinal cord injury.

Spinal cord injury (SCI) represents a profound central nervous system affliction, resulting in irreversibly compromised daily activities and disabilities. SCI involves excessive inflammatory responses, which are characterized by the existence of high levels of proinflammatory M1 macrophages, and neuronal mitochondrial energy deficit, exacerbating secondary damage and impeding axon regeneration. This study delves into the mechanistic intricacies of SCI, offering insights from the perspectives of neuroimmune regulation and mitochondrial function, leading to a pro-fibrotic macrophage phenotype and energy-supplying deficit. To address these challenges, we developed a smart scaffold incorporating enzyme mimicry nanoparticle-ceriumoxide (COPs) into nanofibers (NS@COP), which aims to pioneer a targeted neuroimmune repair strategy, rescuing CGRP receptor on macrophage and concurrently remodeling mitochondrial function. Our findings indicate that the integrated COPs restore the responsiveness of pro-inflammatory macrophages to calcitonin gene-related peptide (CGRP) signal by up-regulating receptor activity modifying protein 1 (RAMP1), a vital component of the CGRP receptor. This promotes macrophage fate commitment to an anti-inflammatory pro-resolution M2 phenotype, then alleviating glial scar formation. In addition, NS@COP implantation also protected neuronal mitochondrial function. Collectively, our results suggest that the strategy of integrating nanozyme COP nanoparticles into a nanofiber scaffold provides a promising therapeutic candidate for spinal cord trauma via rational regulation of neuroimmune communication and mitochondrial function.

Association of sleep quality on the night of operative day with postoperative delirium in elderly patients: A prospective cohort study.

BACKGROUND: Sleep disturbances in the peri-operative period have been associated with adverse outcomes, including postoperative delirium (POD). However, research on sleep quality during the immediate postoperative period is limited. OBJECTIVES: This study aimed to investigate the association between sleep quality on the night of the operative day assessed using the Sleep Quality Numeric Rating Scale (SQ-NRS), and the incidence of POD in a large cohort of surgical patients. DESIGN: A prospective cohort study. SETTING: A tertiary hospital in China. PATIENTS: This study enrolled patients aged 65 years or older undergoing elective surgery under general anaesthesia. The participants were categorised into the sleep disturbance and no sleep disturbance groups according to their operative night SQ-NRS. MAIN OUTCOME MEASURES: The primary outcome was delirium incidence, whereas the secondary outcomes included acute kidney injury, stroke, pulmonary infection, cardiovascular complications and all-cause mortality within 1 year postoperatively. RESULTS: In total, 3072 patients were included in the analysis of this study. Among them, 791 (25.72%) experienced sleep disturbances on the night of operative day. Patients in the sleep disturbance group had a significantly higher risk of developing POD (adjusted OR 1.43, 95% CI 1.11 to 1.82, P  = 0.005). Subgroup analysis revealed that age 65-75 years; male sex; ASA III and IV; haemoglobin more than 12 g l -1 ; intra-operative hypotension; surgical duration more than 120 min; and education 9 years or less were significantly associated with POD. No interaction was observed between the subgroups. No significant differences were observed in the secondary outcomes, such as acute kidney injury, stroke, pulmonary infection, cardiovascular complications and all-cause mortality within 1 year postoperatively. CONCLUSIONS: The poor subjective sleep quality on the night of operative day was independently associated with increased POD risk, especially in certain subpopulations. Optimising peri-operative sleep may reduce POD. Further research should investigate potential mechanisms and causal relationships. TRIAL REGISTRY: chictr.org.cn: ChiCTR1900028545.

Instability in a carbon pool driven by multiple dissolved organic matter sources in a eutrophic lake basin: Potential factors for increased greenhouse gas emissions.

Lakes serve as vital reservoirs of dissolved organic matter (DOM) and play pivotal roles in biogeochemical carbon cycles. However, the sources and compositions of DOM in freshwater lakes and their potential effects on lake sediment carbon pools remain unclear. In this study, seven inflowing rivers in the Lake Taihu basin were selected to explore the potential effects of multi-source DOM inputs on the stability of the lake sediment carbon pool. The results showed the high concentrations of dissolved organic carbon in the Lake Taihu basin, accompanied by a high complexity level. Lignins constituted the majority of DOM compounds, surpassing 40% of the total, while the organic carbon content was predominantly composed of humic acids (1.02-3.01 g kg-1). The high amounts of lignin oxidative cleavage led to CHO being the main molecular structure in the DOM of the seven rivers. The carbon constituents within the sediment carbon reservoir exhibited a positive correlation with dissolved CH4 and CO2, with a notable emphasis on humic acid and dissolved CH4 (R2 = 0.86). The elevated concentration of DOM, coupled with its intricate composition, contributed to the increases in dissolved greenhouse gases (GHGs). Experiments showed that the mixing of multi-source DOM can accelerate the organic carbon mineralization processes. The unit carbon emission efficiency was highest in the mixed group, reaching reached 160.9 µmol∙Cg-1, which also exhibited a significantly different carbon pool. The mixed decomposition of DOM from different sources influenced the roles of the lake carbon pool as source and sink, indicating that the multi-source DOM of this lake basin was a potential driving factor for increased carbon emissions. These findings have improved our understanding of the sources and compositions of DOM in lake basins and revealed their impacts on carbon emissions, thereby providing a theoretical basis for improving assessments of lake carbon emissions.

Which Modality of SFRT Should be Considered First for Bulky Tumor Radiation Therapy, GRID or LATTICE?

Spatially fractionated radiation therapy (SFRT), also known as the GRID and LATTICE radiotherapy (GRT, LRT), the concept of treating tumors by delivering a spatially modulated dose with highly non-uniform dose distributions, is a treatment modality of growing interest in radiation oncology, physics, and radiation biology. Clinical experience in SFRT has suggested that GRID and LATTICE therapy can achieve a high response and low toxicity in the treatment of refractory and bulky tumors. Limited initially to GRID therapy using block collimators, advanced, and versatile multi-leaf collimators, volumetric modulated arc technologies and particle therapy have since increased the capabilities and individualization of SFRT and expanded the clinical investigation of SFRT to various dosing regimens, multiple malignancies, tumor types and sites. As a 3D modulation approach outgrown from traditional 2D GRID, LATTICE therapy aims to reconfigure the traditional SFRT as spatial modulation of the radiation is confined solely to the tumor volume. The distinctively different beam geometries used in LATTICE therapy have led to appreciable variations in dose-volume distributions, compared to GRID therapy. The clinical relevance of the variations in dose-volume distribution between LATTICE and traditional GRID therapies is a crucial factor in determining their adoption in clinical practice. In this Point-Counterpoint contribution, the authors debate the pros and cons of GRID and LATTICE therapy. Both modalities have been used in clinics and their applicability and optimal use have been discussed in this article.

Deep learning from latent spatiotemporal information of the heart: Identifying advanced bioimaging markers from echocardiograms.

A key strength of echocardiography lies in its integration of comprehensive spatiotemporal cardiac imaging data in real-time, to aid frontline or bedside patient risk stratification and management. Nonetheless, its acquisition, processing, and interpretation are known to all be subject to heterogeneity from its reliance on manual and subjective human tracings, which challenges workflow and protocol standardization and final interpretation accuracy. In the era of advanced computational power, utilization of machine learning algorithms for big data analytics in echocardiography promises reduction in cost, cognitive errors, and intra- and inter-observer variability. Novel spatiotemporal deep learning (DL) models allow the integration of temporal arm information based on unlabeled pixel echocardiographic data for convolution of an adaptive semantic spatiotemporal calibration to construct personalized 4D heart meshes, assess global and regional cardiac function, detect early valve pathology, and differentiate uncommon cardiovascular disorders. Meanwhile, data visualization on spatiotemporal DL prediction models helps extract latent temporal imaging features to develop advanced imaging biomarkers in early disease stages and advance our understanding of pathophysiology to support the development of personalized prevention or treatment strategies. Since portable echocardiograms have been increasingly used as point-of-care imaging tools to aid rural care delivery, the application of these new spatiotemporal DL techniques show the potentials in streamlining echocardiographic acquisition, processing, and data analysis to improve workflow standardization and efficiencies, and provide risk stratification and decision supporting tools in real-time, to prompt the building of new imaging diagnostic networks to enhance rural healthcare engagement.

Nanosecond pulse electric field treatment initiates mitochondrial apoptosis pathway by inducing mitochondrial morphological changes in myocardial cells.

BACKGROUND: As an emerging myocardial ablation technique, the mechanism of nanosecond pulse electric field (nsPEF) ablation is currently less studied. Mitochondria are one of the important membrane structure organelles in cells, participating in numerous life activities within the cell. This study aimed to explore the morphological changes of mitochondria in living cells following nsPEF treatment. METHODS: Myocardial cells were treated with a self-made solid-state LTD high-voltage nanosecond pulse generator with a pulse width of 100 ns for 80 times. The changes in mitochondrial membrane potential and cell apoptosis in rat myocardial cells after nsPEFs were investigated using JC-1 assay kit, apoptosis double staining assay kit, and mitochondrial fluorescence probe. RESULTS: The results showed that after nsPEF treatment, the mitochondrial membrane potential decreased, apoptosis increased, and the average mitochondrial area decreased from 0.48 µm2 in live myocardial cells to 0.16 µm2. The average circumference ranges from 3.17 µm dropped to 1.60 µm. The shape factor decreased from 1.92 to 1.41. The aspect ratio has decreased from 2.16 to 1.59. nsPEF treatment induces changes in the morphology of myocardial cell mitochondria. CONCLUSIONS: Based on the results of mitochondrial membrane potential and apoptosis, it can be inferred that under this equipment and parameter conditions, nsPEF treatment first causes changes in mitochondrial morphology, and then initiates the mitochondrial apoptosis pathway, which may provide experimental basis for investigating the potential mechanism of nsPEF ablation of myocardial cells.

Ag-Incorporated Cr-Doped BaTiO3 Aerogel toward Enhanced Photocatalytic Degradation of Methyl Orange.

A novel Cr-doped BaTiO3 aerogel was successfully synthesized using a co-gelation technique that involves two metallic alkoxides and a supercritical drying method. This freshly prepared aerogel has a high specific surface area of over 100 m2/g and exhibits improved responsiveness to the simulated sunlight spectrum. Methyl orange (MO) was chosen as the simulated pollutant, and the results reveal that the Cr-doped BaTiO3 aerogel, when modified with the noble metal silver (Ag), achieves a pollutant removal rate approximately 3.2 times higher than that of the commercially available P25, reaching up to 92% within 60 min. The excellent photocatalytic performance of the Ag-modified Cr-doped BaTiO3 aerogel can be primarily attributed to its extensive specific surface area and three-dimensional porous architecture. Furthermore, the incorporation of Ag nanoparticles effectively suppresses the recombination of photo-generated electrons and holes. Stability and reusability tests have confirmed the reliability of the Ag-modified Cr-doped BaTiO3 aerogel. Therefore, this material emerges as a highly promising candidate for the treatment of textile wastewater.

Evaluation of therapeutic effect and prognostic value of 18F-FDG PET/CT in different treatment nodes of DLBCL patients.

BACKGROUND: In the present study, we aimed to investigate the role of baseline (B), interim (I) and end-of-treatment (Eot) 18F-FDG PET/CT in assessing the prognosis of diffuse large B cell lymphoma (DLBCL), so as to identify patients who need intensive treatment at an early stage. METHODS: A total of 127 DLBCL patients (62 men; 65 women; median age 62 years) were retrospectively analyzed in this study. Baseline (n = 127), interim (n = 127, after 3-4 cycles) and end-of-treatment (n = 53, after 6-8 cycles) PET/CT images were re-evaluated; semi-quantitative parameters such as maximum standardized uptake value of lesion-to-liver ratio (SUVmax(LLR)) and lesion-to-mediastinum ratio (SUVmax(LMR)), total metabolic tumor volume (TMTV) and total metabolic tumor volume (TLG) were recorded. ΔTLG1 was the change of interim relative to baseline TLG (I to B), ΔTLG2 (Eot to B). ΔSUVmax and ΔTMTV were the same algorithm. The visual Deauville 5-point scale (D-5PS) has been adopted as the major criterion for PET evaluation. Visual analysis (VA) and semi-quantitative parameters were assessed for the ability to predict progression-free survival (PFS) and overall survival (OS) by using Kaplan-Meier method, cox regression and logistic regression analysis. When visual and semi-quantitative analysis are combined, the result is only positive if both are positive. RESULTS: At a median follow-up of 34 months, the median PFS and OS were 20 and 32 months. The survival curve analysis showed that advanced stage and IPI score with poor prognosis, ΔSUVmax(LLR)1 < 89.2%, ΔTMTV1 < 91.8% and ΔTLG1 < 98.8%, ΔSUVmax(LLR)2 < 86.4% were significantly related to the shortening of PFS in patient (p < 0.05). ΔSUVmax(LLR)1 < 83.2% and ΔTLG1 < 97.6% were significantly correlated with the shortening of OS in patients (p < 0.05). Visual analysis showed that incomplete metabolic remission at I-PET and Eot-PET increased the risk of progress and death. In terms of predicting recurrence by I-PET, the combination of visual and semi-quantitative parameters showed higher positive predictive value (PPV) and specificity than a single index. CONCLUSION: Three to four cycles of R-CHOP treatment may be a time point for early prediction of early recurrence/refractory (R/R) patients and active preemptive treatment. Combined visual analysis with semi-quantitative parameters of 18F-FDG PET/CT at interim can improve prognostic accuracy and may allow for more precise screening of patients requiring early intensive therapy.

Spatial distribution, source, and fate of per- and polyfluoroalkyl substances in the surrounding environment of closed and converted fluorochemical factories in Fujian, China.

Following the closure of perfluorooctanesulfonic acid (PFOS) production to comply with the Stockholm Convention regulations or restrictions, manufacturers have shifted to developing short-chain alternatives like perfluorobutane sulfonic acid (PFBS). However, limited research has been conducted to evaluate the impact of this transition on the surrounding environment. This study focused on the spatial distribution, source, and fate of 18 per- and polyfluoroalkyl substances (PFAS) in the surrounding environment of the closure and transformation of two PFAS manufacturing plants in Fujian, China. The total concentrations of PFAS in surface water, sediment, and fish were within the range of 48.9-72,400 ng/L, 0.930-57.6 ng/g dw, and 3.33-1245 ng/g dw, respectively. The predominant compounds were PFBS, PFOS, and perfluorooctanoic acid (PFOA) among the three matrices. Principal component analysis highlighted significant differences in PFAS profiles across different regions of the Futun River, suggesting diverse sources of PFAS. Source apportionment indicated that despite being closed or converted for almost three years, the two factories still significantly impacted the surrounding environment. The shutdown factory mainly released PFAS characterized by perfluoroalkyl sulfonic acids. In contrast, the PFAS were released from conversion plant with the fingerprint being PFBS and perfluoroalkyl carboxylic acids. The conversion of the factories has resulted in the coexistence of long-chain and short-chain PFAS, which has complicated the composition of PFAS in the environment. As sewage treatment plant could not effectively remove PFBS and perfluorobutanoic acid (PFBA) in wastewater, and due to their strong migration ability, these chemicals had a wider impact range, increasing the difficulty of environmental restoration and management. Risk assessment showed that PFAS downstream of the two factories posed high or moderate ecological risks. Specifically, PFBS, PFOS, and PFOA displayed the highest risk quotients and should be paid further attention.

Impact on sulfadiazine bio-accessibility in soils through organic diffusive gradients in thin films (o-DGT): Differentiation based on microplastic polymers, aging, and soil properties.

Due to the similar sources of swage irrigation, organic fertilizer, and sludge application, microplastics (MPs) and antibiotics coexist inevitably in the agriculture soils. However, the impacts of MPs with different polymer types and aging status on the bio-accessibility of co-existing antibiotics in soils remained unclear. Therefore, we using the diffusive gradients films for organic compounds devices (o-DGT) to evaluated the distribution of sulfadiazine (SDZ) in both paddy soil and saline soil amended with 0.5 % (w/w) MPs. Four polymer types (polyethylene: PE, polypropylene: PP, polyamide: PA, and polyethylene terephthalate: PET) and two aging statuses (aged PE and aged PP) of MPs were used in this study. Results showed that soil properties significantly influence the partition of SDZ in soil and soil solution, and SDZ gained a lower degradation rate but higher mobility in saline soil. MPs pose different impacts on partition of SDZ between paddy soil and saline soil. Notably, PP reduced the labile solid phase-solution phase partition coefficient (Kdl) by 17.7 % in paddy soil, while PE, PP, and aPE increased the Kdl value by 2.00, 1.62, and 2.81 times in saline soil. Besides, in saline soil, all the MPs reduced the SDZ concentration in the soil solution, while significantly increased the SDZ in o-DGT phase. Conversely, MPs did not impact the SDZ's o-DGT concentration in paddy soil. Additionally, MPs increased the R value of SDZ in two soils, especially in saline soil. It suggested that MPs could potentially enhance the resupply of SDZ from soil to plants, particularly under saline conditions. Furthermore, aged MPs had a more pronounced effect on these indicators compared to virgin MPs in saline soil. Therefore, MPs in soil poses a potential risk for biota's uptake of SDZ, particularly in fragile environment. Moreover, the risk intensifies with aged MPs.

Assessing eco-geographic influences on COVID-19 transmission: a global analysis.

COVID-19 has been massively transmitted for almost 3 years, and its multiple variants have caused serious health problems and an economic crisis. Our goal was to identify the influencing factors that reduce the threshold of disease transmission and to analyze the epidemiological patterns of COVID-19. This study served as an early assessment of the epidemiological characteristics of COVID-19 using the MaxEnt species distribution algorithm using the maximum entropy model. The transmission of COVID-19 was evaluated based on human factors and environmental variables, including climate, terrain and vegetation, along with COVID-19 daily confirmed case location data. The results of the SDM model indicate that population density was the major factor influencing the spread of COVID-19. Altitude, land cover and climatic factor showed low impact. We identified a set of practical, high-resolution, multi-factor-based maximum entropy ecological niche risk prediction systems to assess the transmission risk of the COVID-19 epidemic globally. This study provided a comprehensive analysis of various factors influencing the transmission of COVID-19, incorporating both human and environmental variables. These findings emphasize the role of different types of influencing variables in disease transmission, which could have implications for global health regulations and preparedness strategies for future outbreaks.

Unveiling the spatial distribution and transboundary pathways of FMD serotype O in Western China and its bordering countries.

Foot-and-mouth disease (FMD) is a severe, highly contagious viral disease of livestock that has a significant economic impact on domestic animals and threatens wildlife survival in China and border countries. However, effective surveillance and prevention of this disease is often incomplete and unattainable due to the cost, the great diversity of wildlife hosts, the changing range and dynamics, and the diversity of FMDV. In this study, we used predictive models to reveal the spread and risk of FMD in anticipation of identifying key nodes to control its spread. For the first time, the spatial distribution of FMD serotype O was predicted in western China and border countries using a niche model, which is a combination of eco-geographic, human, topographic, and vegetation variables. The transboundary least-cost pathways (LCPs) model for ungulates in the study area were also calculated. Our study indicates that FMD serotype O survival is seasonal at low altitudes (March and June) and more sensitive to temperature differences at high altitudes. FMD serotype O risk was higher in Central Asian countries and both were highly correlated with the population variables. Ten LCPs were obtained representing Pakistan, Kazakhstan, Kyrgyzstan, and China.

Effects of overgrazing on the functional diversity of rodents in desert areas.

Environmental stressors and disturbances can cause changes in an ecosystem's community structure, which can be reflected in its functional diversity. As grazing intensity increases, this causes changes in the environment that inevitably lead to changes in the community structure, which can especially affect rodents due to their sensitivity to the environment. The effects of grazing prohibition and overgrazing on the functional diversity of desert rodent communities in Alxa were studied in April, July, and October of 2018-2020. The trap-day method was used to study rodent communities in disturbed habitats. Five functional traits were selected and quantified: nutrition, life history, physiology, morphology, and activity rhythm. The results showed that: (1) The species composition of rodent communities in the Alxa Desert in spring and autumn was significantly correlated with the functional traits of the hibernation, reproductive cycle, and feeding habits. The species composition in the summer was only significantly correlated with the functional traits of reproductive cycle and diet. (2) The effects of overgrazing on the functional diversity of rodents in desert areas have significant temporal and spatial characteristics. (3) In spring and summer, overgrazing made the Functional Richness index of the rodent community lower than that of areas where grazing is prohibited, but the Functional Evenness index was higher than that of grazing-prohibition areas. In autumn, overgrazing increased the Functional Richness index of the rodent community and decreased the Functional Evenness index. The Functional Divergence index was higher in overgrazing areas than in grazing-prohibited ones. These results suggest that, in spring and summer, overgrazing reduced the ecological space utilization ability of rodent communities; however, the impact on the degree of utilization of community resources is more comprehensive. In autumn, overgrazing increases the ability of rodent communities to use ecological space but reduces resource efficiency. Overgrazing makes the niche differentiation of rodent communities higher, the degree of overlap lower, and the competition between species weaker. Therefore, overgrazing will affect the functional diversity of the community through the utilization of ecological space, resource utilization, interspecific competition, and niche.

Innervate Commercial Fabrics with Spirally-Layered Iontronic Fibrous Sensors Toward Dual-Functional Smart Garments.

Electronic fabrics exhibit desirable breathability, wearing comfort, and easy integration with garments. However, surficial deposition of electronically functional materials/compounds onto fabric substrates would consequentially alter their intrinsic properties (e.g., softness, permeability, biocompatibility, etc.). To address this issue, here, a strategy to innervate arbitrary commercial fabrics with unique spirally-layered iontronic fibrous (SLIF) sensors is presented to realize both mechanical and thermal sensing functionalities without sacrificing the intrinsic fabric properties. The mechanical sensing function is realized via mechanically regulating the interfacial ionic supercapacitance between two perpendicular SLIF sensors, while the thermal sensing function is achieved based on thermally modulating the intrinsic ionic impedance in a single SLIF sensor. The resultant SLIF sensor-innervated electronic fabrics exhibit high mechanical sensitivity of 81 N-1, superior thermal sensitivity of 34,400 Ω °C-1, and more importantly, greatly minimized mutual interference between the two sensing functions. As demonstrations, various smart garments are developed for the precise monitoring of diverse human physiological signals. Moreover, artificial intelligence-assisted object recognition with high-accuracy (97.8%) is demonstrated with a SLIF sensor-innervated smart glove. This work opens up a new path toward the facile construction of versatile smart garments for wearable healthcare, human-machine interfaces, and the Internet of Things.

Heterostructure Fe7S8/Mn(OH)2 of incomplete sulfurization induces Mn atoms with high density of states for enhancing oxygen evolution reaction and supercapacitor electrochemical performance.

Heterostructures and the introduction of heterogeneous elements have been regarded as effective strategies to promote electrochemical performance. Herein, sulfur species are introduced by a simple hydrothermal vulcanization method, which constructs the open heterostructure Fe7S8/Mn(OH)2 as a bifunctional material. The open cordyceps-like morphology can make the material contact more sufficiently with the electrolyte, exposing a large number of reaction sites. Furthermore, the introduction of the heterogeneous element S successfully constructs a heterogeneous interface, the interface-modulated composite material consists of Mn atoms contributing the main density of states (DOS) near the Fermi energy level from the density functional theory (DFT) calculations, which optimizes the adsorption energy of oxygen-containing intermediates during the oxygen evolution reaction (OER) process and reduces the reaction energy barrier, being conducive to the improvement of the material's electrochemical properties. As predicted, the Fe7S8/Mn(OH)2 material exhibits remarkable electrochemical properties, such as an overpotential of 202 mV at 10 mA cm-2 for the oxygen evolution reaction and even a specific capacitance of 2198 F g-1 at 1 A g-1. This work provides new insights into the role of introducing sulfur species and controlling the structure of the material, and exemplifies novel design ideas for developing bifunctional materials for energy storage and conversion.

Deep learning from atrioventricular plane displacement in patients with Takotsubo syndrome: lighting up the black-box.

Aims: The spatiotemporal deep convolutional neural network (DCNN) helps reduce echocardiographic readers' erroneous 'judgement calls' on Takotsubo syndrome (TTS). The aim of this study was to improve the interpretability of the spatiotemporal DCNN to discover latent imaging features associated with causative TTS pathophysiology. Methods and results: We applied gradient-weighted class activation mapping analysis to visualize an established spatiotemporal DCNN based on the echocardiographic videos to differentiate TTS (150 patients) from anterior wall ST-segment elevation myocardial infarction (STEMI, 150 patients). Forty-eight human expert readers interpreted the same echocardiographic videos and prioritized the regions of interest on myocardium for the differentiation. Based on visualization results, we completed optical flow measurement, myocardial strain, and Doppler/tissue Doppler echocardiography studies to investigate regional myocardial temporal dynamics and diastology. While human readers' visualization predominantly focused on the apex of the heart in TTS patients, the DCNN temporal arm's saliency visualization was attentive on the base of the heart, particularly at the atrioventricular (AV) plane. Compared with STEMI patients, TTS patients consistently showed weaker peak longitudinal displacement (in pixels) in the basal inferoseptal (systolic: 2.15 ± 1.41 vs. 3.10 ± 1.66, P < 0.001; diastolic: 2.36 ± 1.71 vs. 2.97 ± 1.69, P = 0.004) and basal anterolateral (systolic: 2.70 ± 1.96 vs. 3.44 ± 2.13, P = 0.003; diastolic: 2.73 ± 1.70 vs. 3.45 ± 2.20, P = 0.002) segments, and worse longitudinal myocardial strain in the basal inferoseptal (-8.5 ± 3.8% vs. -9.9 ± 4.1%, P = 0.013) and basal anterolateral (-8.6 ± 4.2% vs. -10.4 ± 4.1%, P = 0.006) segments. Meanwhile, TTS patients showed worse diastolic mechanics than STEMI patients (E'/septal: 5.1 ± 1.2 cm/s vs. 6.3 ± 1.5 cm/s, P < 0.001; S'/septal: 5.8 ± 1.3 cm/s vs. 6.8 ± 1.4 cm/s, P < 0.001; E'/lateral: 6.0 ± 1.4 cm/s vs. 7.9 ± 1.6 cm/s, P < 0.001; S'/lateral: 6.3 ± 1.4 cm/s vs. 7.3 ± 1.5 cm/s, P < 0.001; E/E': 15.5 ± 5.6 vs. 12.5 ± 3.5, P < 0.001). Conclusion: The spatiotemporal DCNN saliency visualization helps identify the pattern of myocardial temporal dynamics and navigates the quantification of regional myocardial mechanics. Reduced AV plane displacement in TTS patients likely correlates with impaired diastolic mechanics.

Effects of Freeze-Drying Processes on the Acoustic Absorption Performance of Sustainable Cellulose Nanocrystal Aerogels.

Cellulose aerogels have great prospects for noise reduction applications due to their sustainable value and superior 3D interconnected porous structures. The drying principle is a crucial factor in the preparation process for developing high-performance aerogels, particularly with respect to achieving high acoustic absorption properties. In this study, multifunctional cellulose nanocrystal (CNC) aerogels were conveniently prepared using two distinct freeze-drying principles: refrigerator conventional freezing (RCF) and liquid nitrogen unidirectional freezing (LnUF). The results indicate that the rapid RCF process resulted in a denser CNC aerogel structure with disordered larger pores, causing a stronger compressive performance (Young's modulus of 40 kPa). On the contrary, the LnUF process constructed ordered structures of CNC aerogels with a lower bulk density (0.03 g/cm3) and smaller apertures, resulting in better thermal stability, higher diffuse reflection across visible light, and especially increased acoustic absorption performance at low-mid frequencies (600-3000 Hz). Moreover, the dissipation mechanism of sound energy in the fabricated CNC aerogels is predicted by a designed porous media model. This work not only paves the way for optimizing the performance of aerogels through structure control, but also provides a new perspective for developing sustainable and efficient acoustic absorptive materials for a wide range of applications.