ABSTRACT
Next-generation light-emitting displays on skin should be soft, stretchable and bright1-7. Previously reported stretchable light-emitting devices were mostly based on inorganic nanomaterials, such as light-emitting capacitors, quantum dots or perovskites6-11. They either require high operating voltage or have limited stretchability and brightness, resolution or robustness under strain. On the other hand, intrinsically stretchable polymer materials hold the promise of good strain tolerance12,13. However, realizing high brightness remains a grand challenge for intrinsically stretchable light-emitting diodes. Here we report a material design strategy and fabrication processes to achieve stretchable all-polymer-based light-emitting diodes with high brightness (about 7,450 candela per square metre), current efficiency (about 5.3 candela per ampere) and stretchability (about 100 per cent strain). We fabricate stretchable all-polymer light-emitting diodes coloured red, green and blue, achieving both on-skin wireless powering and real-time displaying of pulse signals. This work signifies a considerable advancement towards high-performance stretchable displays.
ABSTRACT
Compared with their three-dimensional (3D) counterparts, low-dimensional metal halide perovskites (2D and quasi-2D; B2An-1MnX3n+1, such as B = R-NH3+, A = HC(NH2)2+, Cs+; M = Pb2+, Sn2+; X = Cl-, Br-, I-) with periodic inorganic-organic structures have shown promising stability and hysteresis-free electrical performance1-6. However, their unique multiple-quantum-well structure limits the device efficiencies because of the grain boundaries and randomly oriented quantum wells in polycrystals7. In single crystals, the carrier transport through the thickness direction is hindered by the layered insulating organic spacers8. Furthermore, the strong quantum confinement from the organic spacers limits the generation and transport of free carriers9,10. Also, lead-free metal halide perovskites have been developed but their device performance is limited by their low crystallinity and structural instability11. Here we report a low-dimensional metal halide perovskite BA2MAn-1SnnI3n+1 (BA, butylammonium; MA, methylammonium; n = 1, 3, 5) superlattice by chemical epitaxy. The inorganic slabs are aligned vertical to the substrate and interconnected in a criss-cross 2D network parallel to the substrate, leading to efficient carrier transport in three dimensions. A lattice-mismatched substrate compresses the organic spacers, which weakens the quantum confinement. The performance of a superlattice solar cell has been certified under the quasi-steady state, showing a stable 12.36% photoelectric conversion efficiency. Moreover, an intraband exciton relaxation process may have yielded an unusually high open-circuit voltage (VOC).
ABSTRACT
Tin organic-inorganic halide perovskites (tin OIHPs) possess a desirable band gap and their power conversion efficiency (PCE) has reached 14 %. A commonly held view is that the organic cations in tin OIHPs would have little impact on the optoelectronic properties. Herein, we show that the defective organic cations with randomly dynamic characteristics can have marked effect on optoelectronic properties of the tin OIHPs. Hydrogen vacancies originated from the proton dissociation from FA [HC(NH2 )2 ] in FASnI3 can induce deep transition levels in the band gap but yield relatively small nonradiative recombination coefficients of 10-15 â cm3 s-1 , whereas those from MA (CH3 NH3 ) in MASnI3 can yield much larger nonradiative recombination coefficients of 10-11 â cm3 s-1 . Additional insight into the "defect tolerance" is gained by disentangling the correlations between dynamic rotation of organic cations and charge-carrier dynamics.
ABSTRACT
Supported catalysts have exhibited excellent performance in various reactions. However, the rational design of supported catalysts with high activity and certain selectivity remains a great challenge because of the complicated interfacial effects. Using recently emerged two-dimensional materials supported dual-atom catalysts (DACs@2D) as a prototype, we propose a simple and universal descriptor based on inherent atomic properties (electronegativity, electron type, and number), which can well evaluate the complicated interfacial effects on the electrochemical reduction reactions (i.e., CO2, O2, and N2 reduction reactions). Based on this descriptor, activity and selectivity trends in CO2 reduction reaction are successfully elucidated, in good agreement with available experimental data. Moreover, several potential catalysts with superior activity and selectivity for target products are predicted, such as CuCr/g-C3N4 for CH4 and CuSn/N-BN for HCOOH. More importantly, this descriptor can also be extended to evaluate the activity of DACs@2D for O2 and N2 reduction reactions, with very small errors between the prediction and reported experimental/computational results. This work provides feasible principles for the rational design of advanced electrocatalysts and the construction of universal descriptors based on inherent atomic properties.
ABSTRACT
Transient electronics are a rapidly emerging field due to their potential applications in the environment and human health. Recently, a few studies have incorporated acid-labile imine bonds into polymer semiconductors to impart transience; however, understanding of the structure-degradation property relationships of these polymers is limited. In this study, we systematically design and characterize a series of fully degradable diketopyrrolopyrrole-based polymers with engineered sidechains to investigate the impact of several molecular design parameters on the degradation lifetimes of these polymers. By monitoring degradation kinetics via ultraviolet-visible spectroscopy, we reveal that polymer degradation in solution is aggregation-dependent based on the branching point and Mn, with accelerated degradation rates facilitated by decreasing aggregation. Additionally, increasing the hydrophilicity of the polymers promotes water diffusion and therefore acid hydrolysis of the imine bonds along the polymer backbone. The aggregation properties and degradation lifetimes of these polymers rely heavily on solvent, with polymers in chlorobenzene taking six times as long to degrade as in chloroform. We develop a new method for quantifying the degradation of polymers in the thin film and observe that similar factors and considerations (e.g., interchain order, crystallite size, and hydrophilicity) used for designing high-performance semiconductors impact the degradation of imine-based polymer semiconductors. We found that terpolymerization serves as an attractive approach for achieving degradable semiconductors with both good charge transport and tuned degradation properties. This study provides crucial principles for the molecular design of degradable semiconducting polymers, and we anticipate that these findings will expedite progress toward transient electronics with controlled lifetimes.
Subject(s)
Imines , Polymers , Electronics , Humans , Polymers/chemistry , SemiconductorsABSTRACT
Strategies to improve stretchability of polymer semiconductors, such as introducing flexible conjugation-breakers or adding flexible blocks, usually result in degraded electrical properties. In this work, we propose a concept to address this limitation, by introducing conjugated rigid fused-rings with optimized bulky side groups and maintaining a conjugated polymer backbone. Specifically, we investigated two classes of rigid fused-ring systems, namely, benzene-substituted dibenzothiopheno[6,5-b:6',5'-f]thieno[3,2-b]thiophene (Ph-DBTTT) and indacenodithiophene (IDT) systems, and identified molecules displaying optimized electrical and mechanical properties. In the IDT system, the polymer PIDT-3T-OC12-10% showed promising electrical and mechanical properties. In fully stretchable transistors, the polymer PIDT-3T-OC12-10% showed a mobility of 0.27 cm2 V-1 s-1 at 75% strain and maintained its mobility after being subjected to hundreds of stretching-releasing cycles at 25% strain. Our results underscore the intimate correlation between chemical structures, mechanical properties, and charge carrier mobility for polymer semiconductors. Our described molecular design approach will help to expedite the next generation of intrinsically stretchable high-performance polymer semiconductors.
ABSTRACT
BACKGROUND: Hydatid cysts are parasitic zoonoses that often occur in the liver. Pancreatic hydatid cysts are very rare and are usually misdiagnosed as pancreatic cystadenomas. At present, surgical resection combined with albendazole administration is the standard treatment for pancreatic hydatid cysts. However, making accurate preoperative diagnoses and avoiding intraoperative cystic rupture are challenges for surgeons. CASE PRESENTATION: A 28-year-old woman from the pastoral area presented to the surgical office complaining of abdominal pain and new-onset jaundice that began 9 days earlier. An enhanced computed tomography scan demonstrated a 6.0 × 5.3 cm pancreatic head cystic mass that compressed the common bile duct and induced choledochectasia. The preoperative diagnosis was pancreatic head cystadenoma, and laparotomic pancreaticoduodenectomy was initiated successfully. The intra- and postoperative diagnosis was pancreatic hydatid cyst. The patient was discharged uneventfully 7 days after the operation. A 1-year course of albendazole (15 mg/kg/day) was admitted. CONCLUSION: Pancreatic hydatid cysts are rare and often misdiagnosed as other types of cysts. History of living in an area in which the causative organism is endemic and positive anti-echinococcus IgG antibody status could help with the diagnosis. Radical resection combined with oral albendazole administration is the standard treatment for pancreatic hydatid cysts. Avoiding perioperative cystic rupture and abdominal echinococcosis implantation metastasis is crucial for the success of the operation.
Subject(s)
Echinococcosis , Pancreatic Diseases , Abdominal Pain , Adult , Animals , Echinococcosis/diagnostic imaging , Echinococcosis/drug therapy , Female , Humans , Pancreas/surgery , Pancreatectomy , Pancreatic Diseases/surgeryABSTRACT
Polymer aggregation and crystallization behavior play a crucial role in the performance of all-polymer solar cells (all-PSCs). Gaining control over polymer self-assembly via molecular design to influence bulk-heterojunction active-layer morphology, however, remains challenging. Herein, we show a simple yet effective way to modulate the self-aggregation of the commonly used naphthalene diimide (NDI)-based acceptor polymer (N2200), by systematically replacing a certain amount of alkyl side-chains with compact bulky side-chains (CBS). Specifically, we have synthesized a series of random copolymer (PNDI-CBSx) with different molar fractions (x = 0-1) of the CBS units and have found that both solution-phase aggregation and solid-state crystallinity of these acceptor polymers are progressively suppressed with increasing x as evidenced by UV-vis absorption, photoluminescence (PL) spectroscopies, thermal analysis, and grazing incidence X-ray scattering (GIWAXS) techniques. Importantly, as compared to the highly self-aggregating N2200, photovoltaic results show that blending of more amorphous acceptor polymers with donor polymer (PBDB-T) can enable all-PSCs with significantly increased PCE (up to 8.5%). The higher short-circuit current density (Jsc) results from the smaller polymer phase-separation domain sizes as evidenced by PL quenching and resonant soft X-ray scattering (R-SoXS) analyses. Additionally, we show that the lower crystallinity of the active layer is less sensitive to the film deposition methods. Thus, the transition from spin-coating to solution coating can be easily achieved with no performance losses. On the other hand, decreasing aggregation and crystallinity of the acceptor polymer too much reduces the photovoltaic performance as the donor phase-separation domain sizes increases. The highly amorphous acceptor polymers appear to induce formation of larger donor polymer crystallites. These results highlight the importance of a balanced aggregation strength between the donor and acceptor polymers to achieve high-performance all-PSCs with optimal active layer film morphology.
ABSTRACT
We report how the nanoconfined environment, introduced by the mechanical bonds within an electrochemically switchable bistable [2]rotaxane, controls the rotation of a fluorescent molecular rotor, namely, an 8-phenyl-substituted boron dipyrromethene (BODIPY). The electrochemical switching of the bistable [2]rotaxane induces changes in the ground-state coconformation and in the corresponding excited-state properties of the BODIPY rotor. In the starting redox state, when no external potential is applied, the cyclobis(paraquat-p-phenylene) (CBPQT4+) ring component encircles the tetrathiafulvalene (TTF) unit on the dumbbell component, leaving the BODIPY rotor unhindered and exhibiting low fluorescence. Upon oxidation of the TTF unit to a TTF2+ dication, the CBPQT4+ ring is forced toward the molecular rotor, leading to an increased energy barrier for the excited state to rotate the rotor into the state with a high nonradiative rate constant, resulting in an overall 3.4-fold fluorescence enhancement. On the other hand, when the solvent polarity is high enough to stabilize the excited charge-transfer state between the BODIPY rotor and the CBPQT4+ ring, movement of the ring toward the BODIPY rotor produces an unexpectedly strong fluorescence signal decrease as the result of photoinduced electron transfer from the BODIPY rotor to the CBPQT4+ ring. The nanoconfinement effect introduced by mechanical bonding can effectively lead to modulation of the physicochemical properties as observed in this bistable [2]rotaxane. On account of the straightforward synthetic strategy and the facile modulation of switchable electrochromic behavior, our approach could pave the way for the development of new stimuli-responsive materials based on mechanically interlocked molecules for future electro-optical applications, such as sensors, molecular memories, and molecular logic gates.
Subject(s)
Boron Compounds/chemistry , Electrochemical Techniques , Fluorescent Dyes/chemistry , Rotaxanes/chemistry , Molecular Structure , Oxidation-ReductionABSTRACT
BACKGROUND: For the growing patient population with congenital heart disease (CHD), improving clinical workflow, accuracy of diagnosis, and efficiency of analyses are considered unmet clinical needs. Cardiovascular magnetic resonance (CMR) imaging offers non-invasive and non-ionizing assessment of CHD patients. However, although CMR data facilitates reliable analysis of cardiac function and anatomy, clinical workflow mostly relies on manual analysis of CMR images, which is time consuming. Thus, an automated and accurate segmentation platform exclusively dedicated to pediatric CMR images can significantly improve the clinical workflow, as the present work aims to establish. METHODS: Training artificial intelligence (AI) algorithms for CMR analysis requires large annotated datasets, which are not readily available for pediatric subjects and particularly in CHD patients. To mitigate this issue, we devised a novel method that uses a generative adversarial network (GAN) to synthetically augment the training dataset via generating synthetic CMR images and their corresponding chamber segmentations. In addition, we trained and validated a deep fully convolutional network (FCN) on a dataset, consisting of [Formula: see text] pediatric subjects with complex CHD, which we made publicly available. Dice metric, Jaccard index and Hausdorff distance as well as clinically-relevant volumetric indices are reported to assess and compare our platform with other algorithms including U-Net and cvi42, which is used in clinics. RESULTS: For congenital CMR dataset, our FCN model yields an average Dice metric of [Formula: see text] and [Formula: see text] for LV at end-diastole and end-systole, respectively, and [Formula: see text] and [Formula: see text] for RV at end-diastole and end-systole, respectively. Using the same dataset, the cvi42, resulted in [Formula: see text], [Formula: see text], [Formula: see text] and [Formula: see text] for LV and RV at end-diastole and end-systole, and the U-Net architecture resulted in [Formula: see text], [Formula: see text], [Formula: see text] and [Formula: see text] for LV and RV at end-diastole and end-systole, respectively. CONCLUSIONS: The chambers' segmentation results from our fully-automated method showed strong agreement with manual segmentation and no significant statistical difference was found by two independent statistical analyses. Whereas cvi42 and U-Net segmentation results failed to pass the t-test. Relying on these outcomes, it can be inferred that by taking advantage of GANs, our method is clinically relevant and can be used for pediatric and congenital CMR segmentation and analysis.
Subject(s)
Deep Learning , Heart Defects, Congenital/diagnostic imaging , Image Interpretation, Computer-Assisted , Magnetic Resonance Imaging , Adolescent , Age Factors , Automation , Child , Child, Preschool , Female , Heart Defects, Congenital/physiopathology , Humans , Male , Predictive Value of Tests , Reproducibility of Results , WorkflowABSTRACT
Members of the EPIDERMAL PATTERNING FACTOR-LIKE (EPFL) family play diverse roles in plant growth and development, including the guidance of inflorescence architecture and pedicel length. In this work, we identified and characterized the EFPL gene TaEPFL1 from the wheat pistillody mutant HTS-1. Sequence alignment and phylogenetic analysis indicated that TaEPFL1 belongs to the EPFL1 gene. Quantitative real-time RT-PCR analysis showed that the TaEPFL1 gene is expressed at an abnormally high level in pistillody stamens compared with that in pistils and stamens. Heterologous expression of the TaEPFL1 gene in Arabidopsis caused shortened filaments and pedicels and might reduce the level of AtACO2 gene expression. These results suggest that TaEPFL1 plays an important role in the development of stamen and that overexpression of TaEPFL1 results in abnormal stamens. We deduced that the overexpression of the TaEPFL1 gene may contribute to the homeotic transformation of stamens into pistils or pistil-like structures in wheat. These data offer insights into the molecular mechanism of pistillody mutation in wheat.
Subject(s)
Flowers/genetics , Gene Expression Regulation, Developmental , Plant Proteins/genetics , Triticum/genetics , Flowers/growth & development , Plant Proteins/metabolism , Triticum/growth & developmentABSTRACT
Ultrafast photodriven electron transfer reactions starting from an excited singlet state in an organic donor-acceptor molecule generate a radical pair (RP) in which the two spins are initially entangled and, in principle, can serve as coupled spin qubits in quantum information science (QIS) applications, provided that spin coherence lifetimes in these RPs are long. Here we investigate the effects of electron transfer between two equivalent sites comprising the reduced acceptor of the RP. A covalent electron donor-acceptor molecule (D-C-A24+) including a p-methoxyaniline donor (D), a 4-aminonaphthalene-1,8-imide chromophoric primary acceptor (C), and a m-xylene bridged cyclophane having two equivalent phenyl-extended viologens (A24+) as a secondary acceptor was synthesized along with the analogous molecule having one phenyl-extended viologen acceptor and a second, more difficult to reduce 2,5-dimethoxyphenyl-extended viologen in a very similar cyclophane structure (D-C-A4+). Photoexcitation of C within each molecule results in subnanosecond formation of D+â¢-C-A23+⢠and D+â¢-C-A3+â¢. The spin dynamics of these RPs were characterized by time-resolved EPR spectroscopy and magnetic field effects on the RP yield in both CH3CN and CD3CN. The data show that rapid electron hopping within A23+⢠promotes spin decoherence in D+â¢-C-A23+⢠relative to D+â¢-C-A3+⢠having a monomeric acceptor, while the interaction of the RP electron spins with the nuclear spins of the solvent have little or no effect on the spin dynamics. These observations provide important information for designing and understanding novel molecular assemblies of spin qubits with long coherence times for QIS applications.
ABSTRACT
The ideal fluorescent probe for live-cell imaging is bright and non-cytotoxic and can be delivered easily into the living cells in an efficient manner. The design of synthetic fluorophores having all three of these properties, however, has proved to be challenging. Here, we introduce a simple, yet effective, strategy based on well-established chemistry for designing a new class of fluorescent probes for live-cell imaging. A box-like hybrid cyclophane, namely ExTzBox·4X (6·4X, X = PF6-, Cl-), has been synthesized by connecting an extended viologen (ExBIPY) and a dipyridyl thiazolothiazole (TzBIPY) unit in an end-to-end fashion with two p-xylylene linkers. Photophysical studies show that 6·4Cl has a quantum yield ΦF = 1.00. Furthermore, unlike its ExBIPY2+ and TzBIPY2+ building units, 6·4Cl is non-cytotoxic to RAW 264.7 macrophages, even with a loading concentration as high as 100 µM, presumably on account of its rigid box-like structure which prevents its intercalation into DNA and may inhibit other interactions with it. After gaining an understanding of the toxicity profile of 6·4Cl, we employed it in live-cell imaging. Confocal microscopy has demonstrated that 64+ is taken up by the RAW 264.7 macrophages, allowing the cells to glow brightly with blue laser excitation, without any hint of photobleaching or disruption of normal cell behavior under the imaging conditions. By contrast, the acyclic reference compound Me2TzBIPY·2Cl (4·2Cl) shows very little fluorescence inside the cells, which is quenched completely under the same imaging conditions. In vitro cell investigations underscore the significance of using highly fluorescent box-like rigid cyclophanes for live-cell imaging.
Subject(s)
Fluorescent Dyes/chemistry , Macrocyclic Compounds/chemistry , Pyridinium Compounds/chemistry , Thiazoles/chemistry , Animals , Fluorescence , Fluorescent Dyes/chemical synthesis , Fluorescent Dyes/radiation effects , Fluorescent Dyes/toxicity , Light , Macrocyclic Compounds/chemical synthesis , Macrocyclic Compounds/radiation effects , Macrocyclic Compounds/toxicity , Mice , Microscopy, Confocal/methods , Models, Chemical , Pyridinium Compounds/chemical synthesis , Pyridinium Compounds/radiation effects , Pyridinium Compounds/toxicity , Quantum Theory , RAW 264.7 Cells , Thiazoles/chemical synthesis , Thiazoles/radiation effects , Thiazoles/toxicityABSTRACT
The three-dimensional hybrid organic-inorganic perovskites have shown huge potential for use in solar cells and other optoelectronic devices. Although these materials are under intense investigation, derivative materials with lower dimensionality are emerging, offering higher tunability of physical properties and new capabilities. Here, we present two new series of hybrid two-dimensional (2D) perovskites that adopt the Dion-Jacobson (DJ) structure type, which are the first complete homologous series reported in halide perovskite chemistry. Lead iodide DJ perovskites adopt a general formula A'A n-1Pb nI3 n+1 (A' = 3-(aminomethyl)piperidinium (3AMP) or 4-(aminomethyl)piperidinium (4AMP), A = methylammonium (MA)). These materials have layered structures where the stacking of inorganic layers is unique as they lay exactly on top of another. With a slightly different position of the functional group in the templating cation 3AMP and 4AMP, the as-formed DJ perovskites show different optical properties, with the 3AMP series having smaller band gaps than the 4AMP series. Analysis on the crystal structures and density functional theory (DFT) calculations suggest that the origin of the systematic band gap shift is the strong but indirect influence of the organic cation on the inorganic framework. Fabrication of photovoltaic devices utilizing these materials as light absorbers reveals that (3AMP)(MA)3Pb4I13 has the best power conversion efficiency (PCE) of 7.32%, which is much higher than that of the corresponding (4AMP)(MA)3Pb4I13.
ABSTRACT
The synthesis of stable organic polyradicals is important for the development of magnetic materials. Herein we report the synthesis, isolation, and characterization of a series of X-shaped pyromellitimide (PI) oligomers (Xn-R, n = 2-4, R = Hex or Ph) linked together by single C-C bonds between their benzenoid cores. We hypothesize that these oligomers might form high-spin states in their reduced forms because of the nearly orthogonal conformations adopted by their PI units. 1H and 13C nuclear magnetic resonance (NMR) spectroscopies confirmed the isolation of the dimeric, trimeric, and tetrameric homologues. X-ray crystallography shows that X2-Ph crystallizes into a densely packed superstructure, despite the criss-crossed conformations adopted by the molecules. Electrochemical experiments, carried out on the oligomers Xn-Hex, reveal that the reductions of the PI units occur at multiple distinct potentials, highlighting the weak electronic coupling between the adjacent redox centers. Finally, the chemically generated radical anion and polyanion states, Xn-Hexâ¢- and Xn-Hexn(â¢-), respectively, were probed extensively by UV-vis-NIR absorption, EPR, and electron nuclear double resonance (ENDOR) spectroscopies. The ENDOR spectra of the radical monoanions Xn-Hexâ¢- reveal that the unpaired electron is largely localized on a single PI unit. Further reductions of Xn-Hexâ¢- yield EPR signals (in frozen solutions) that can be assigned to spin-spin interactions in X2-Hex2(â¢-), X3-Hex3(â¢-), and X4-Hex4(â¢-). Taken together, these findings demonstrate that directly linking the benzene rings of PIs with a single C-C bond is a viable method for generating stabilized high-spin organic anionic polyradicals.
ABSTRACT
Crystalline supramolecular frameworks consisting of charged molecules, held together by hydrogen bonds and Coulomb interactions, have attracted great interest because of their unusual structural, chemical, electronic, and magnetic properties. Herein, we report the preparation, structure, and magnetic properties of the triradical trianion of a shape-persistent chiral equilateral molecular triangle having three naphthalene-1,4:5,8-bis(dicarboximide)s ((+)-NDI-Δ3(-â¢)). Single-crystal X-ray diffraction of its tris(cobaltocenium) salt ([(+)-NDI-Δ3(-â¢)(CoCp2+)3]) reveals accessible one-dimensional tubular cavities, and variable-temperature electron paramagnetic resonance spectroscopy shows that a dilute solution of [(+)-NDI-Δ3(-â¢)(CoCp2+)3] in an organic glass has a spin-frustrated doublet ground state and a thermally accessible quartet state. Furthermore, SQUID magnetometry from 5 to 300 K of solid [(+)-NDI-Δ3(-â¢)(CoCp2+)3] shows ferromagnetic ordering with a Curie temperature TC = 20 K. The successful preparation of hybrid ionic materials comprising macrocyclic triradical trianions with spin-frustrated ground states and accessible 1D pores offers routes to new organic spintronic materials.
ABSTRACT
Hybrid inorganic-organic perovskites are developing rapidly as high performance semiconductors. Recently, two-dimensional (2D) perovskites were found to have white-light, broadband emission in the visible range that was attributed mainly to the role of self-trapped excitons (STEs). Here, we describe three new 2D lead bromide perovskites incorporating a series of bifunctional ammonium dications as templates which also emit white light: (1) α-(DMEN)PbBr4 (DMEN = 2-(dimethylamino)ethylamine), which adopts a unique corrugated layered structure in space group Pbca with unit cell a = 18.901(4) Å, b = 11.782(2) Å, and c = 23.680(5) Å; (2) (DMAPA)PbBr4 (DMAPA = 3-(dimethylamino)-1-propylamine), which crystallizes in P21/c with a = 10.717(2) Å, b = 11.735(2) Å, c = 12.127(2) Å, and ß = 111.53(3)°; and (3) (DMABA)PbBr4 (DMABA = 4-dimethylaminobutylamine), which adopts Aba2 with a = 41.685(8) Å, b = 23.962(5) Å, and c = 12.000(2) Å. Photoluminescence (PL) studies show a correlation between the distortion of the "PbBr6" octahedron in the 2D layer and the broadening of PL emission, with the most distorted structure having the broadest emission (183 nm full width at half-maximum) and longest lifetime (τavg = 1.39 ns). The most distorted member α-(DMEN)PbBr4 exhibits white-light emission with a color rendering index (CRI) of 73 which is similar to a fluorescent light source and correlated color temperature (CCT) of 7863 K, producing "cold" white light.
ABSTRACT
Facile exciton transport within ordered assemblies of π-stacked chromophores is essential for developing molecular photonic and electronic materials. Excimer states having variable charge transfer (CT) character are frequently implicated as promoting or inhibiting exciton mobility in such systems. However, determining the degree of CT character in excimers as a function of their structure has proven challenging. Herein, we report on a series of cyclophanes in which the interplanar distance between two phenyl-extended viologen (ExV2+) chromophores is varied systematically using a pair of o-, m-, or p-xylylene (o-, m-, or p-Xy) covalent linkers to produce o-ExBox4+ (3.5 Å), m-ExBox4+ (5.6 Å), and p-ExBox4+ (7.0 Å), respectively. The cyclophane structures are characterized using NMR spectroscopy in solution and single-crystal X-ray diffraction in the solid state. Femtosecond transient mid-IR and stimulated Raman spectroscopies show that the CT contribution to the excimer states formed in o-ExBox4+ and m-ExBox4+ depends on the distance between the chromophores within the cyclophanes, while in the weak interaction limit, as represented by p-ExBox4+ (7.0 Å), the lowest excited singlet state of ExV2+ exclusively photo-oxidizes the p-Xy spacer to give the p-Xy+â¢-ExV+⢠ion pair. Moreover, the vibrational spectra of the excimer state show that it assumes a geometry that is intermediate between that of the locally excited and CT states, approximately reflecting the degree of CT character.
ABSTRACT
Two-dimensional (2D) hybrid halide perovskites come as a family (B)2(A)n-1PbnX3n+1 (B and A= cations; X= halide). These perovskites are promising semiconductors for solar cells and optoelectronic applications. Among the fascinating properties of these materials is white-light emission, which has been mostly observed in single-layered 2D lead bromide or chloride systems (n = 1), where the broad emission comes from the transient photoexcited states generated by self-trapped excitons (STEs) from structural distortion. Here we report a multilayered 2D perovskite (n = 3) exhibiting a tunable white-light emission. Ethylammonium (EA+) can stabilize the 2D perovskite structure in EA4Pb3Br10-xClx (x = 0, 2, 4, 6, 8, 9.5, and 10) with EA+ being both the A and B cations in this system. Because of the larger size of EA, these materials show a high distortion level in their inorganic structures, with EA4Pb3Cl10 having a much larger distortion than that of EA4Pb3Br10, which results in broadband white-light emission of EA4Pb3Cl10 in contrast to narrow blue emission of EA4Pb3Br10. The average lifetime of the series decreases gradually from the Cl end to the Br end, indicating that the larger distortion also prolongs the lifetime (more STE states). The band gap of EA4Pb3Br10-xClx ranges from 3.45 eV (x = 10) to 2.75 eV (x = 0), following Vegard's law. First-principles density functional theory calculations (DFT) show that both EA4Pb3Cl10 and EA4Pb3Br10 are direct band gap semiconductors. The color rendering index (CRI) of the series improves from 66 (EA4Pb3Cl10) to 83 (EA4Pb3Br0.5Cl9.5), displaying high tunability and versatility of the title compounds.
ABSTRACT
Persistent π-radicals such as MV+⢠(MV refers to methyl viologen, i.e., N,N'-dimethyl-4,4'-bipyridinum) engage in weak radical-radical interactions. This phenomenon has been utilized recently in supramolecular chemistry with the discovery that MV+⢠and [cyclobis(paraquat-p-phenylene)]2(+â¢) (CBPQT2(+â¢)) form a strong 1:1 host-guest complex [CBPQTâMV]3(+â¢). In this full paper, we describe the extension of radical-pairing-based molecular recognition to a larger, square-shaped diradical host, [cyclobis(paraquat-4,4'-biphenylene)]2(+â¢) (MS2(+â¢)). This molecular square was evaluated for its ability to bind an isomeric series of possible diradical cyclophane guests, which consist of two radical viologen units that are linked by two ortho-, meta-, or para-xylylene bridges to provide different spacing between the planar radicals. UV-Vis-NIR measurements reveal that only the m-xylylene-linked isomer (m-CBPQT2(+â¢)) binds strongly inside of MS2(+â¢), resulting in the formation of a tetraradical complex [MSâm-CBPQT]4(+â¢). Titration experiments and variable temperature UV-Vis-NIR and EPR spectroscopic data indicate that, relative to the smaller trisradical complex [CBPQTâMV]3(+â¢), the new host-guest complex forms with a more favorable enthalpy change that is offset by a greater entropic penalty. As a result, the association constant (Ka = (1.12 ± 0.08) × 105 M-1) for [MSâm-CBPQT]4(+â¢) is similar to that previously determined for [CBPQTâMV]3(+â¢). The (super)structures of MS2(+â¢), m-CBPQT2(+â¢), and [MSâm-CBPQT]4(+â¢) were examined by single-crystal X-ray diffraction measurements and density functional theory calculations. The solid-state and computational structural analyses reveal that m-CBPQT2(+â¢) is ideally sized to bind inside of MS2(+â¢). The solid-state superstructures also indicate that localized radical-radical interactions in m-CBPQT2(+â¢) and [MSâm-CBPQT]4(+â¢) disrupt the extended radical-pairing interactions that are common in crystals of other viologen radical cations. Lastly, the formation of [MSâm-CBPQT]4(+â¢) was probed by cyclic voltammetry, demonstrating that the radical states of the cyclophanes are stabilized by the radical-pairing interactions.