ABSTRACT
Single-frequency fiber lasers at S-, C-, and L-bands play a crucial role in various applications such as optical network expansion, high-precision metrology, coherent lidar, and atomic physics. However, compared to the C-band, the S- and L-bands have wavelength deviations and suffer from excited-state absorption, which limits the output performance. To address this issue, a strategy called ion hybridization has been proposed to increase the differences in site locations of rare earth (RE) ions in the laser matrix, thereby achieving a broader gain bandwidth. This strategy has been applied to an Er3+/Yb3+ co-doped modified phosphate fiber (EYMPF), resulting in gain coefficients per unit length greater than 2â dB/cm at S-, C-, and L-bands. To demonstrate its capabilities, several centimeter-long EYMPFs have been used to generate single-frequency laser outputs at S-, C- and L-bands with kHz-linewidths, high signal-to-noise ratios (>70â dB), and low relative intensity noise (<-130â dB/Hz) in a compact short linear-cavity configuration.
ABSTRACT
A 10 W super-wideband ultra-low-intensity-noise single-frequency fiber laser (SFFL) at 1â µm is experimentally demonstrated, based on dual gain saturation effects from semiconductors and optical fibers, together with an analog-digital hybrid optoelectronic feedback loop. Three intensity-noise-inhibited units synergistically work, which actualizes a connection of effective bandwidth and enhancement of noise-suppressing amplitude. With the cascade action of the semiconductor optical amplifier and optical fiber amplifier, the laser power is remarkably boosted. Eventually, an SFFL with an output power of 10.8 W and a relative intensity noise (RIN) below -150â dB/Hz at the frequency range over 1â Hz is realized. More meaningfully, within the total frequency range of 10â Hz to 10â GHz exceeding 29 octaves, the RIN is controlled to below -160â dB/Hz, approaching the shot-noise limit (SNL) level. To the best of our knowledge, this is the lowest RIN result of SFFL within such an extensive frequency range, and this is the highest output power of the near-SNL super-wideband SFFL. Furthermore, a linewidth of less than 0.8 kHz, a long-term stable polarization extinction ratio of 20â dB, and an optical signal-to-noise ratio of over 60â dB are obtained simultaneously. This start-of-the-art SFFL has provided a systematic solution for high-power and low-noise light sources, which is competitive for sophisticated applications, such as free-space laser communication, space-based gravitational wave detection, and super-long-distance space coherent velocity measurement and ranging.
ABSTRACT
Single-frequency fiber lasers (SFFLs), 1083â nm, have been extensively applied in 4He optical pumping magnetometers (OPMs) for magnetic field detection. However, the sensitivity and accuracy of OPMs are constrained by the frequency stability of SFFLs. Focusing on this concern, the frequency-stabilized performance of the 1083â nm SFFLs is successfully improved by externally tailoring the laser linewidth to match the spectral width of the error signal in saturated absorption spectroscopy. Thereinto, a high-intensity error signal of saturated absorption is generated as a large number of 4He atoms with a wide range of velocities interacting with the 1083â nm laser. Consequently, the root mean square value of the fluctuating frequency after locking is effectively decreased from 24.6 to 13.6â kHz, which achieves a performance improvement of 44.7%. Such a strategy can provide a technical underpinning for effectuating an absolute frequency stabilization with higher precision based on atomic and molecular absorption spectroscopy techniques.
ABSTRACT
The survival path mapping approach has been proposed for dynamic prognostication of cancer patients using time-series survival data. The SurvivalPath R package was developed to facilitate building personalized survival path models. The package contains functions to convert time-series data into time-slices data by fixed interval based on time information of input medical records. After the pre-processing of data, under a user-defined parameters on covariates, significance level, minimum bifurcation sample size and number of time slices for analysis, survival paths can be computed using the main function, which can be visualized as a tree diagram, with important parameters annotated. The package also includes function for analyzing the connections between exposure/treatment and node transitions, and function for screening patient subgroup with specific features, which can be used for further exploration analysis. In this study, we demonstrate the application of this package in a large dataset of patients with hepatocellular carcinoma, which is embedded in the package. The SurvivalPath R package is freely available from CRAN, with source code and documentation hosted at https://github.com/zhangt369/SurvivalPath.
Subject(s)
Carcinoma, Hepatocellular , Liver Neoplasms , Humans , Software , Time FactorsABSTRACT
In this article, the vector dynamics of semiconductor optical amplifiers (SOAs) are systematically analyzed and developed to explore its mechanism of intensity noise suppression. First, theoretical investigation on the gain saturation effect and carrier dynamics is performed via a vectorial model, and the calculated result unravels desynchronized intensity fluctuations of two orthogonal polarization states. Particularly, it predicts an out-of-phase case, which allows the cancellation of the fluctuations via adding up the orthogonally-polarized components, then establishes a synthetic optical field with stable amplitude and dynamic polarization, and thereby enables a remarkable relative intensity noise (RIN) reduction. Here, we term this approach of RIN suppression as out-of-phase polarization mixing (OPM). To validate the OPM mechanism, we conduct an SOA-mediated noise-suppression experiment based on a reliable single-frequency fiber laser (SFFL) with the presence of relaxation oscillation peak, and subsequently carry out a polarization resolvable measurement. By this means, out-of-phase intensity oscillations with respect to the orthogonal polarization states are clearly demonstrated, and consequently enable a maximum suppression amplitude of >75â dB. Notably, the RIN of 1550-nm SFFL, suppressed by joint action of OPM and gain saturation effect, is dramatically reduced to -160â dB/Hz in a wideband of 0.5â MHzâ¼10â GHz, and the performance of which is excellent by comparing with the corresponding shot noise limit of -161.9â dB/Hz. The proposal of OPM here not only facilitates us to dissect the vector dynamics of SOA but also offers a promising solution to realize wideband near-shot-noise-limited SFFL.
ABSTRACT
An optimized bidirectional pumping fiber amplifier is demonstrated to achieve low-frequency intensity noise suppression and effective power enhancement simultaneously. Based on the concept analysis of the gain saturation effect, the influence of input signal power and pump power on intensity noise suppression is investigated and optimized systematically. Further combining with the optimization of the pumping configuration to achieve the even-distribution gain, the relative intensity noise (RIN) of 1083â nm single-frequency fiber laser (SFFL) is suppressed with 9.1â dB in the frequency range below 10 kHz. Additionally, the laser power is boosted from 10.97 dBm to 25.02 dBm, and a power instability of ±0.31% is realized. This technology has contributed to simultaneously improving the power and noise performance of the 1083â nm SFFL, which can be applied to a multi-channel helium (He) optically pumping magnetometer. Furthermore, this technique has broken the mindset that power amplification of the conventional fiber amplifiers will inevitably cause the degradation of intensity noise property, and provided a valuable guidance for the development of high-performance SFFLs.
ABSTRACT
An ultrafine electro-optical frequency comb (EOFC) with plentiful comb teeth is demonstrated. Adopting a single-frequency fiber laser as a light source, cascade phase modulation based on a sinusoidal signal and a frequency-time transformation (FTT) signal is executed to generate the EOFC with high fineness. Meanwhile, a cyclic fast frequency shifting strategy is introduced to boost the number of comb teeth and the bandwidth of the EOFC. As a result, an EOFC with 12600 comb lines covering a broad bandwidth from -6.3â GHz to 6.3â GHz is established, corresponding to an ultrafine comb space of 1â MHz. Moreover, the power fluctuation of a comb tooth is less than 0.5 dBm. This state-of-the-art EOFC has significant potential in the field of precision spectroscopy.
ABSTRACT
Aiming at applications like expanding usable wave band of optical telecommunication and preparing Sr optical lattice clocks, a 1627â nm single-frequency fiber laser (SFFL) is demonstrated based on a 7-m-long self-designed Er-doped hybridized glass fiber (EDHF) and a linear cavity configuration with a loop mirror filter (LMF). By inserting a 10-m-long unpumped commercial Er-doped fiber as a dynamic Bragg grating into the LMF, a stable single-longitudinal-mode (SLM) laser with an output power of about 10â mW is obtained. The optical signal-to-noise ratio (OSNR) of SFFL is over 50â dB, and the linewidth is about 3.7â kHz. The measured relative intensity noise (RIN) is less than -140â dB/Hz at frequencies of over 0.5â MHz, and a power variation in 1 h is less than ±0.26%. To our best knowledge, it is the first demonstration of a SFFL operating at the U-band. This 1627â nm SFFL can provide advanced light source technology support for many cutting-edge applications.
ABSTRACT
The survival of free fat grafts is dependent primarily on adipose-derived stem cells (ADSCs); however, ADSCs are susceptible to oxidative stress in the recipient area. Astaxanthin (Axt) is a natural xanthophyll carotenoid with potent antioxidant properties and numerous clinical applications. To date, the therapeutic potential of Axt in fat grafting has not been explored. The purpose of this study is to investigate the effects of Axt on oxidatively stressed ADSCs. An oxidative model of ADSCs was developed to simulate the host's microenvironment. Oxidative insult decreased the protein levels of Cyclin D1, type I collagen alpha 1 (COL1A1), and type II collagen alpha 1 (COL2A1), while increasing the expression of cleaved Caspase 3 and secretion of interleukin-6 (IL-6) and tumor necrosis factor-alpha (TNF-α) in ADSCs. Axt pre-treatment significantly reduced oxidative stress, increased the synthesis of an adipose extracellular matrix, alleviated inflammation, and restored the impaired adipogenic potential in the present model. Furthermore, Axt immensely activated the NF-E2-related factor 2 (Nrf2) pathway, and ML385, an inhibitor of Nrf2, could negate Axt's protective effects. Additionally, Axt alleviated apoptosis by inhibiting bcl-2-associated X protein (BAX)/Caspase 3 signaling and improving the mitochondrial membrane potential (MMP), which could also be abolished by ML385. Our results suggest that Axt may exert its cytoprotective effect on ADSCs through the Nrf2 signaling pathway and could be therapeutic in fat grafting.
Subject(s)
Mesenchymal Stem Cells , NF-E2-Related Factor 2 , Oxidative Stress , Xanthophylls , Apoptosis , Caspase 3/metabolism , Mesenchymal Stem Cells/metabolism , NF-E2-Related Factor 2/metabolism , Oxidative Stress/drug effects , Signal Transduction , Xanthophylls/pharmacology , HumansABSTRACT
A pulse compressing technology of single-frequency Q-switched laser based on the cascaded four-wave mixing (CFWM) effect is demonstrated theoretically and experimentally, for the first time to the best of our knowledge. A theoretical model of the pulse compression is established through deconstructing the pulse duration evolution in the high-order Stokes and anti-Stokes lights of CFWM. A pulse compression ratio of (2|m|+1)1/2 is quantificationally obtained with m corresponding to the order number of the CFWM light. Utilizing dual-wavelength (DW) single-frequency Q-switched laser injected into a highly nonlinear fiber (HNLF), the pulse compression and the spectral broadening phenomenon are observed simultaneously. As the order number of the CFWM light increases from 0-order to 3-order, the pulse duration has reduced from 115 ns to 47 ns with a compression ratio of 2.45, which is essentially consistent with the theoretical analysis. The pulse compressing technique by CFWM is conducive to promoting the performance development of the single-frequency Q-switched laser, which can improve the system precision in the Lidar, trace gas detection, and high-precision ranging. Furthermore, this technology based on time-frequency transformation dynamics may be generally applicable to other single-frequency pulsed fiber lasers.
ABSTRACT
An over-20-octaves-bandwidth ultralow-intensity-noise 1064-nm single-frequency fiber laser (SFFL) is demonstrated based on a comprehensive all-optical technique. With a joint action of booster optical amplifier (BOA) and reflective Yb-doped fiber amplifier (RYDFA), two-fold optical gain saturation effects, respectively occurring in the media of semiconductor and fiber, have been synthetically leveraged. Benefiting from the gain dynamics in complementary time scales, i.e., nanosecond-order carrier lifetime in BOA and millisecond-order upper-level lifetime in RYDFA, the relative intensity noise (RIN) is reduced to -150â dB/Hz from 0.2 kHz to 350â MHz, which exceeds 20-octaves bandwidth. Remarkably, a maximum suppressing ratio of >54â dB is obtained, and the RIN in the range of 0.09-10â GHz reaches -161â dB/Hz which is only 2.3â dB above the shot-noise limit. This broad-bandwidth ultralow-intensity-noise SFFL can serve as an important building block for squeezed light generation, space laser communication, space gravitational wave detection, etc.
ABSTRACT
We report a compact all-fiber passively mode-locked ultrafast laser with a fundamental repetition rate of 1.6 GHz that uses a self-developed long-wavelength active fiber, i.e., a fluoro-sulfo-phosphate-based Er3+/Yb3+ co-doped fiber (only 6.2 cm in length). This active fiber can provide a net gain coefficient of 0.6 dB/cm at 1610 nm. The high-repetition-rate all-fiber mode-locked laser operates at a low pump power of only approximately 90 mW. The mode-locked pulse train has a period of 625 ps and a 3 dB bandwidth of 7.0 nm, which can support a transform-limited pulse width of 390 fs.
ABSTRACT
Studies have shown that long non-coding RNA (lncRNA) MEG3 plays a key role in osteoporosis (OP), but its regulatory mechanism is somewhat incompletely clear. Here, we intend to probe into the mechanism of MEG3 on OP development by modulating microRNA-214 (miR-214) and thioredoxin-interacting protein (TXNIP). Rat models of OP were established. MEG3, miR-214 and TXNIP mRNA expression in rat femoral tissues were detected, along with TXNIP, OPG and RANKL protein expression. BMD, BV/TV, Tb.N and Tb.Th in tissue samples were measured. Ca, P and ALP contents in rat serum were also determined. Primary osteoblasts were isolated and cultured. Viability, COL-I, COL-II and COL-Χ mRNA expression, PCNA, cyclin D1, OCN, RUNX2 and osteolix protein expresion, ALP content and activity, and mineralized nodule area of rat osteoblasts were further detected. Dual-luciferase reporter gene and RNA-pull down assays verified the targeting relationship between MEG3, miR-214 and TXNIP. MEG3 and TXNIP were up-regulated while miR-214 was down-regulated in femoral tissues of OP rats. MEG3 silencing and miR-214 overexpression increased BMD, BV/TV, Tb.N, Tb.Th, trabecular bone area, collagen area and OPG expression, and down-regulated RANKL of femoral tissues in OP rats. MEG3 silencing and miR-214 overexpression elevated Ca and P and reduced ALP in OP rat serum, elevated osteoblast viability, differentiation ability, COL-I and COL-Χ expression and ALP activity, and reduced COL-II expression of osteoblasts. MEG3 specifically bound to miR-214 to regulate TXNIP. MEG3 silencing and miR-214 overexpression promote proliferation and differentiation of osteoblasts in OP by down-regulating TXNIP, which further improves OP.
Subject(s)
Cell Cycle Proteins/genetics , Gene Silencing , MicroRNAs/genetics , Osteoporosis/genetics , Osteoprotegerin/genetics , RNA, Long Noncoding/genetics , 3' Untranslated Regions , Animals , Biomarkers , Cell Differentiation/genetics , Disease Susceptibility , Female , Gene Expression Regulation , Models, Biological , Osteoblasts/metabolism , Osteoporosis/metabolism , Osteoporosis/pathology , RNA Interference , RatsABSTRACT
Based mainly on the distributed Bragg reflector (DBR) short linear cavity with a 1.6-cm-long heavily Tm3+-doped germanate glass fiber and semiconductor saturable absorber mirror (SESAM), a compact passively Q-switched single-frequency fiber laser at around 1950 nm is demonstrated experimentally. By comparing pulse characters of Q-switched operations fulfilled via SESAMs with different parameters, a stable output pulse is optimized to deliver a maximum average power of 22.2 mW, a peak power of 0.67 W, and an optical signal-to-noise ratio over 61 dB. Moreover, the repetition rate of the output pulse can be tuned from 92 to 520 kHz with a narrowest pulse width of 64 ns. To the best of our knowledge, this is the first time a 2.0 µm passively Q-switched single-frequency DBR Tm3+-doped fiber laser has been realized, and it shows great potential application in remote sensing, biomedical science, and nonlinear optics.
ABSTRACT
ABSTRACT: Auricular cartilage is a common autologous graft material for rhinoplasty. Even though surgical techniques for the harvest of cartilage graft are well established, the management of the postoperative dressing fixation is still limited. Therefore, the authors propose a simple dressing fixation method in which gauze strips instead of gauze block or wet cotton, the suture of tie-over dressing fixed just through the cartilage rather than the full thickness of the auricle, a vaseline gauze interposed between the stitch knot and the skin and no additional pressure dressings postauricularly. No case of hematoma, infection and skin necrosis of the donor site was observed. This simple and reproducible technique provides perfect and homogeneous adhesion of the dressing all over the conchal cartilage while decreasing the risk of postoperative hematoma and discomfort.
Subject(s)
Ear Auricle , Rhinoplasty , Bandages , Ear Cartilage/surgery , Humans , Petrolatum , Skin TransplantationABSTRACT
BACKGROUND: The awareness and treatment of lacrimal gland prolapse (LGP) have been primarily improved with a further understanding of lateral eyelid bulging over the decades. However, for Asian single-eyelid females with LGP, a tailor-made procedure applicable to their comparatively young puffy eyes is needed. METHODS: This is a retrospective study. From Jan. 2009 to Jan. 2019, two hundred and three Asian single-eyelid females with LGP, who met the inclusion criteria, underwent double-eyelid surgeries and adjunctive lacrimal gland repositions with preaponeurotic fat transposition. Pertinent demographics, complications, pre-and post-operative photography were collected. RESULTS: A total of 167 patients completed the 4-24 months' follow-up (average: 16.3 months). One hundred and thirty-two cases (79.0%) were diagnosed as LGP preoperatively, and the rest (35/167, 21.0%) were diagnosed intraoperatively. All patients (average: 28.4 years old) received modified blepharoplasty. Postoperative symptoms involving local mild pain (2.9%, 5/167), upper eyelid tightness (3.6%, 6/167), and moderate epiphora (9.0%, 15/167) were all recovered spontaneously within one month. Prolapse recurrence and severe complications such as dry eye syndrome were not observed. CONCLUSIONS: We proposed a modified procedure to enhance the diagnosis and treatment of LGP during Asian blepharoplasty. The lacrimal gland suspension and fat transposition assured the cosmetic outcome for selected young, puffy Asian eyes. The supratarsal creases were satisfactory, and the complication rate was low. Furthermore, the rearrangement of preaponeurotic fat smoothed the contour transition and preserved the orbital volume. Therefore, this is a safe and effective technique worth recommending.
Subject(s)
Blepharoplasty , Lacrimal Apparatus , Adult , Asian People , Eyelids/surgery , Female , Humans , Lacrimal Apparatus/diagnostic imaging , Lacrimal Apparatus/surgery , Prolapse , Retrospective StudiesABSTRACT
In this Letter, a bidirectional amplifier configuration suppressing the relative intensity noise in a 1950-nm linearly polarized single-frequency fiber laser (SFFL) is proposed. The scheme to amplify the signal in a nonlinear saturated amplification regime with low gain distribution for suppressing the RIN is theoretically analyzed. By optimizing the input power level and reflectivity of the bidirectional power-amplifier, the RIN is decreased maximally by >24dB within the frequency range of 200 kHz. A stable output power of over 5.16 W with a polarization extinction ratio of 21.2 dB is obtained. Additionally, the amplified signal maintains a linewidth of 7.1 kHz nearly identical with that of the seed, both with a signal-to-noise ratio of more than 60 dB. This all-optical technique on noise suppression applied to the fiber amplifier paves the way to realize low-noise SFFL with power improvement.
ABSTRACT
Based on core- and in-band-pumped polarization-maintaining ${{\rm Tm}^{3 + }}$Tm3+-doped single-cladding fiber (PM-TSF, the core diameter is 9 µm) by a 1610 nm fiber laser and a distributed Bragg reflector seed laser, a linearly polarized single-frequency fiber laser (LP-SFFL) at 1950 nm with an output power of 55.3 W and a laser linewidth of 6.95 kHz is demonstrated. The output beam qualities of ${M}_x^2$Mx2 and ${ M}_y^2$My2 are measured to be 1.01 and 1.03, respectively. The slope efficiency with respect to the launched pump power is 71.0%, in comparison with a theoretical quantum efficiency of 82.6%. A polarization-extinction ratio of 19 dB and an optical signal-to-noise ratio of 58 dB are obtained from the 1950 nm LP-SFFL. To the best of our knowledge, to date, this is the highest power of 2.0 µm SFFL output directly from a strict single-mode active fiber. Our experiment offers a promising solution to the current limitations of the high-performance fiber lasers at 2.0 µm, which is particularly essential for coherent detection.
ABSTRACT
In this work, Tm:YAG (Tm:${{\rm Y}_3}{{\rm Al}_5}{{\rm O}_{12}}$Y3Al5O12) ceramic-derived multimaterial fiber was fabricated by using the molten core method, which has a high gain per unit length of 2.7 dB/cm at 1950 nm. To our knowledge, this is the highest gain per unit length at 2 µm band in similar Tm:YAG-derived multimaterial fibers. A distributed Bragg reflector (DBR) fiber laser was built based on a 10-cm-long as-drawn fiber. The achieved 1950 nm laser, which has a maximum output power of $\sim{240}\;{\rm mW}$â¼240mW and a slope efficiency of 16.5%, was pumped by a self-developed 1610 nm fiber laser. What is more, an all-fiber-integrated passively mode-locked fiber laser based on the 10-cm-long as-drawn fiber was realized. The mode-locked pulses operate at 1950 nm with duration of $\sim{380}\;{\rm ps}$â¼380ps, and the repetition rate is 26.45 MHz. The results described here indicate that the Tm:YAG ceramic-derived multimaterial fiber with high gain per unit length has promising applications in 2 µm all-fiber fiber lasers.
ABSTRACT
Noise-sideband-free and narrow-linewidth photonic microwave generation based on an optical heterodyne technique is demonstrated experimentally. By beating a self-injection-locking low-noise single-frequency fiber laser and a Brillouin fiber laser, a 9.4 GHz microwave is produced, and its noise sidebands are completely suppressed. Additionally, the signal-to-noise ratio of the microwave signal is improved by 15 dB from 40 to 55 dB, and the linewidth is compressed from 1.6 to 0.53 kHz. The high-performance photonic microwave based on low-noise fiber lasers is a promising candidate in further applications such as wireless network, lidar, and satellite communication.