Wavelength-Controlled Photoconductance Polarity Switching via Harnessing Defects in Doped PdSe2 for Artificial Synaptic Features.

Optoelectronic synapses are currently drawing significant attention as fundamental building blocks of neuromorphic computing to mimic brain functions. In this study, a two-terminal synaptic device based on a doped PdSe2 flake is proposed to imitate the key neural functions in an optical pathway. Due to the wavelength-dependent desorption of oxygen clusters near the intrinsic selenide vacancy defects, the doped PdSe2 photodetector achieves a high negative photoresponsivity of -7.8 × 103 A W-1 at 473 nm and a positive photoresponsivity of 181 A W-1 at 1064 nm. This wavelength-selective bi-direction photoresponse endows an all-optical pathway to imitate the fundamental functions of artificial synapses on a device level, such as psychological learning and forgetting capability, as well as dynamic logic functions. The underpinning photoresponse is further demonstrated on a flexible platform, providing a viable technology for neuromorphic computing in wearable electronics. Furthermore, the p-type doping results in an effective increase of the channel's electrical conductivity and a significant reduction in power consumption. Such low-power-consuming optical synapses with simple device architecture and low-dimensional features demonstrate tremendous promise for building multifunctional artificial neuromorphic systems in the future.

Polarization-Resolved Near-Infrared PdSe2 p-i-n Homojunction Photodetector.

Constructing high-quality homojunctions plays a pivotal role for the advancement of two-dimensional transition metal sulfide (TMDC) based optoelectronic devices. Here, a lateral PdSe2 p-i-n homojunction is constructed by electrostatic doping. Electrical measurements reveal that the homojunction diode exhibits a strong rectifying characteristic with a rectification ratio exceeding 104 and an ideality factor approaching 1. When functioning in photovoltaic mode, the device achieves a high responsivity of 1.1 A/W under 1064 nm illumination, with a specific detectivity of 1.3 × 1011 Jones and a high linearity of 45 dB. Benefiting from the lateral p-i-n structure, the junction capacitance is significantly reduced, and an ultrafast response (3/6 µs) is obtained. Additionally, the photodiode has the capability of polarization distinction due to the unique in-plane anisotropic structure of PdSe2, exhibiting a dichroic ratio of 1.6 at a 1064 nm wavelength. This high-performance polarization-sensitive near-infrared photodetector exhibits great potential in the next-generation optoelectronic applications.

Gate-tunable diode-like current rectification and ambipolar transport in multilayer van der Waals ReSe2/WS2 p-n heterojunctions.

Vertically stacked van der Waals (vdW) heterojunctions of two-dimensional (2D) transition metal dichalcogenides (TMDs) have attracted a great deal of attention due to their fascinating properties. In this work, we report two important gate-tunable phenomena in new artificial vdW p-n heterojunctions created by vertically stacking p-type multilayer ReSe2 and n-type multilayer WS2: (1) well-defined strong gate-tunable diode-like current rectification across the p-n interface is observed, and the tunability of the electronic processes is attributed to the tunneling-assisted interlayer recombination induced by majority carriers across the vdW interface; (2) the distinct ambipolar behavior under gate voltage modulation both at forward and reverse bias voltages is found in the vdW ReSe2/WS2 heterojunction transistors and a corresponding transport model is proposed for the tunable polarity behaviors. The findings may provide some new opportunities for building nanoscale electronic and optoelectronic devices.

Tuning the optical, magnetic, and electrical properties of ReSe2 by nanoscale strain engineering.

Creating materials with ultimate control over their physical properties is vital for a wide range of applications. From a traditional materials design perspective, this task often requires precise control over the atomic composition and structure. However, owing to their mechanical properties, low-dimensional layered materials can actually withstand a significant amount of strain and thus sustain elastic deformations before fracture. This, in return, presents a unique technique for tuning their physical properties by "strain engineering". Here, we find that local strain induced on ReSe2, a new member of the transition metal dichalcogenides family, greatly changes its magnetic, optical, and electrical properties. Local strain induced by generation of wrinkle (1) modulates the optical gap as evidenced by red-shifted photoluminescence peak, (2) enhances light emission, (3) induces magnetism, and (4) modulates the electrical properties. The results not only allow us to create materials with vastly different properties at the nanoscale, but also enable a wide range of applications based on 2D materials, including strain sensors, stretchable electrodes, flexible field-effect transistors, artificial-muscle actuators, solar cells, and other spintronic, electromechanical, piezoelectric, photonic devices.

Improving the field-effect performance of Bi2S3 single nanowires by an asymmetric device fabrication.

High-quality Bi2 S3 nanowires are synthesized by chemical vapor deposition and their intrinsic photoresponsive and field-effect characteristics are explored in detail. Among the studied Au-Au, Ag-Ag, and Au-Ag electrode pairs, the device with stepwise band alignment of asymmetric Au-Ag electrodes has the highest mobility. Furthermore, it is shown that light can cause a sevenfold decrease of the on/off ratio. This can be explained by the photoexcited charge carriers that are more beneficial to the increase of Ioff than Ion . The photoresponsive properties of the asymmetric Au-Ag electrode devices were also explored, and the results show a photoconductive gain of seven with a rise time of 2.9 s and a decay time of 1.6 s.

Single-crystalline High-κ GdOCl dielectric for two-dimensional field-effect transistors.

Two-dimensional (2D) dielectrics, integrated with high-mobility semiconductors, show great promise to overcome the scaling limits in miniaturized integrated circuits. However, the 2D dielectrics explored to date still face the challenges of low crystallinity, diminished dielectric constant, and the lack of effective synthesis methods. Here, we report the controllable synthesis of ultra-thin gadolinium oxychloride (GdOCl) nanosheets via a chloride hydrate-assisted chemical vapor deposition (CVD) method. The resultant GdOCl nanosheets display good dielectric properties, including a high dielectric constant (high-κ) of 15.3, robust breakdown field strengths (Ebd) exceeding 9.9 MV/cm, and minimal gate leakage currents of approximately 10-6 A/cm2. The top-gated GdOCl/MoS2 field-effect transistors (FETs) exhibit commendable switch characteristics, a negligible hysteresis of ~5 mV and a subthreshold swing down to 67.9 mV dec-1. The GdOCl/MoS2 FETs can also be employed to construct functional logic gates. Our study underscores the significant potential of the 2D GdOCl dielectric for innovative high-speed operated nanoelectronic devices.

Wrinkled Rhenium Disulfide for Anisotropic Nonvolatile Memory and Multiple Artificial Neuromorphic Synapses.

Two-dimensional materials are emerging as potential solutions for high-density nonvolatile memory and efficient neuromorphic computing. However, integrating multidimensional memory and an ideal linear weight updating synapse in a simple device configuration to achieve versatile biomimetic neuromorphic systems remains challenging. Here, we introduce a wrinkled rhenium disulfide (ReS2) transistor, where the wrinkled structure facilitates the carrier trapping/detrapping at the dielectric interface, thus enabling the fusion of nonvolatile memory and both electronic and optoelectronic synaptic functionalities. As a nonvolatile memory, anisotropic wrinkled ReS2 can yield three distinct sets of data across three crystal orientations under identical programming operations. Each set demonstrates exceptional retention and endurance properties. As a neuromorphic synapse, it realizes the linear and symmetric updates of conductance states up to 9 bits and 8 bits, the ultra-low-energy consumption of 75 fJ and 2.5 pJ under the electrical and optical stimuli, respectively. The artificial neural network (ANN) based on electronic synapses gives a superior recognition accuracy of 92.9% for the original handwritten digits. The anisotropic synaptic responses and multiwavelength sensitivities of optoelectronic synapses enable them to execute advanced memory and recognition functions for complex images that encompass a variety of pattern features or color information. This underscores its substantial potential for integration into efficient biomimetic visual systems.

Layer-dependent ultrafast carrier dynamics of PdSe2 investigated by photoemission electron microscopy.

For atomically thin two-dimensional materials, variations in layer thickness can result in significant changes in the electronic energy band structure and physicochemical properties, thereby influencing the carrier dynamics and device performance. In this work, we employ time- and energy-resolved photoemission electron microscopy to reveal the ultrafast carrier dynamics of PdSe2 with different layer thicknesses. We find that for few-layer PdSe2 with a semiconductor phase, an ultrafast hot carrier cooling on a timescale of approximately 0.3 ps and an ultrafast defect trapping on a timescale of approximately 1.3 ps are unveiled, followed by a slower decay of approximately tens of picoseconds. However, for bulk PdSe2 with a semimetal phase, only an ultrafast hot carrier cooling and a slower decay of approximately tens of picoseconds are observed, while the contribution of defect trapping is suppressed with the increase of layer number. Theoretical calculations of the electronic energy band structure further confirm the transition from a semiconductor to a semimetal. Our work demonstrates that TR- and ER-PEEM with ultrahigh spatiotemporal resolution and wide-field imaging capability has great advantages in revealing the intricate details of ultrafast carrier dynamics of nanomaterials.

Abnormal photocurrent response and enhanced photocatalytic activity induced by charge transfer between WS(2) nanosheets and WO(3) nanoparticles.

Sun trap: Pure WS2 nanosheets are prepared that exhibit excellent photosensitive properties. After functionalization with WO3 nanoparticles, abnormal photocurrent responses, enhanced photocatalytic activity, and induced photoluminescence is observed.

Controllable Synthesis of 2H-1T' Mox Re(1- x ) S2 Lateral Heterostructures and Their Tunable Optoelectronic Properties.

Constructing heterostructures and doping are valid ways to improve the optoelectronic properties of transition metal dichalcogenides (TMDs) and optimize the performance of TMDs-based photodetectors. Compared with transfer techniques, chemical vapor deposition (CVD) has higher efficiency in preparing heterostructures. As for the one-step CVD growth of heterostructures, cross-contamination between the two materials may occur during the growth process, which may provide the possibility of one-step simultaneous realization of controllable doping and formation of alloy-based heterostructures by finely tuning the growth dynamics. Here, 2H-1T' Mox Re(1- x ) S2 alloy-to-alloy lateral heterostructures are synthesized through this one-step CVD growth method, utilizing the cross-contamination and different growth temperatures of the two alloys. Due to the doping of a small amount of Re atoms in 2H MoS2 , 2H Mox Re(1- x ) S2 has a high response rejection ratio in the solar-blind ultraviolet (SBUV) region and exhibits a positive photoconductive (PPC) effect. While the 1T' Mox Re(1- x ) S2 formed by heavily doping Mo atoms into 1T' ReS2 will produce a negative photoconductivity (NPC) effect under UV laser irradiation. The optoelectronic property of 2H-1T' Mox Re(1- x ) S2 -based heterostructures can be modulated by gate voltage. These findings are expected to expand the functionality of traditional optoelectronic devices and have potential applications in optoelectronic logic devices.

Photocurrent response of surface-functionalized metal oxides with well-matched energy levels: from nothing to something.

In recent years, an enormous amount of research has been devoted to the study of photosensitive materials from both fundamental and practical viewpoints, due to their wide applications in photocatalytic and optoelectronic devices, ultraviolet (UV) photodetectors, photoswitch microdevices, light-emitting diodes, photovoltaic devices, and photoelectrochemical cells. Metal oxides, such as ZnO, TiO(2), SnO(2), and NiO have been the most investigated photosensitive materials. To enhance and take full advantage of their photosensitivity, functionalizing their surface with a polymer that has a high light absorption ability has become one of the widely used methods. For example, Z. L. Wang et al. reported that the UV photocurrent of a ZnO nanobelt-based sensor was enhanced by close to five orders of magnitude after functionalizing its surface with polystyrene sulfate which has a high UV absorption ability. T. Sasaki et al. reported the assembly of a TiO(2) nanoparticle film with poly(3,4-ethylenedioxythiophene) and poly(4-styrene sulfonate) (PEDOT-PSS) through layer-by-layer fabrication in the nanometer scale. The electric conductivity of the TiO(2) composite films could be tuned by UV and visible (Vis) light. Thus, sunlight or photon energy can be used and transformed to electrical energy by UV-photosensitive metal oxides after their surfaces have been functionalized with a dye that has a high Vis absorption ability. To date, most of the dye-sensitized solar cells are based on the surface functionalization of UV-photosensitive metal oxides by dyes. However, to the best of our knowledge, all of the reports on surface functionalization enhanced only the UV photosensitivity of the metal oxide. In other words, this method has been used exclusively to enhance the UV photocurrent in metal oxides that already have UV-photosensitive properties, but not to induce UV photocurrent in metal oxides that have no UV-photosensitive properties. In fact, to the best of our knowledge, there are no surface-functionalizing reports on inducing UV or Vis photocurrent in metal oxides that have no UV- or Vis-photosensitive properties.

Application of SDN Network Traffic Prediction Based on Speech Recognition in Educational Information Optimization Platform.

This paper constructs a SDN network traffic prediction model based on speech recognition and applies it to the educational information optimization platform. By analyzing the influencing factors of SDN network equipment, communication links, and network traffic, this paper constructs the initial index set of SDN network traffic situation. In the data plane of SDN, the queue management algorithm is used to control the flow. On this basis, an IRS mechanism is proposed based on the advantages of SDN centralized control and the difference of transmission performance requirements between large and small streams. For the transmission of large traffic, IRS adopts greedy routing and multipath routing based on the remaining bandwidth to make the traffic evenly distributed in the network, and IRS adds the scheduling strategy based on IP addressing to avoid packet disorder. Simulation results show that the effectiveness of this algorithm can reach 95.67% at the highest, and the MSE convergence is 0.0021 at the lowest. At the same time, this method completes the quantitative evaluation of SDN network traffic situation, effectively solves the problem that SDN traffic situation labels cannot be determined, and opens a new vision of global state observation for SDN network management. This research can provide some technical support for the educational information optimization platform.

Strain and Interference Synergistically Modulated Optical and Electrical Properties in ReS2/Graphene Heterojunction Bubbles.

Two-dimensional (2D) material bubbles, as a straightforward method to induce strain, represent a potentially powerful platform for the modulation of different properties of 2D materials and the exploration of their strain-related applications. Here, we prepare ReS2/graphene heterojunction bubbles (ReS2/gr heterobubbles) and investigate their strain and interference synergistically modulated optical and electrical properties. We perform Raman and photoluminescence (PL) spectra to verify the continuously varying strain and the microcavity induced optical interference in ReS2/gr heterobubbles. Kelvin probe force microscopy (KPFM) is carried out to explore the photogenerated carrier transfer behavior in both strained ReS2/gr heterobubbles and ReS2/gr interfaces, as well as the oscillation of surface potential caused by optical interference under illumination conditions. Moreover, the switching of in-plane crystal orientation and the modulation of optical anisotropy of ReS2/gr heterobubbles are observed by azimuth-dependent reflectance difference microscopy (ADRDM), which can be attributed to the action of both strain effect and interference. Our study proves that the optical and electrical properties can be effectively modulated by the synergistical effect of strain and interference in a 2D material bubble.

Tuning the Exchange Bias Effect in 2D van der Waals Ferro-/Antiferromagnetic Fe3 GeTe2 /CrOCl Heterostructures.

The exchange bias effect is extremely expected in 2D van der Waals (vdW) ferromagnetic (FM)/antiferromagnetic (AFM) heterostructures due to the high-quality interface. CrOCl possesses strong magnetic anisotropy at 2D limit, and is an ideal antiferromagnet for constructing FM/AFM heterostructures to explore the exchange bias effect. Here, the exchange bias effect in Fe3 GeTe2 (FGT)/CrOCl heterostructures through both anomalous Hall effect (AHE) and reflective magnetic circular dichroism (RMCD) measurements is studied. In the AHE measurements, the exchange bias field (HEB ) at 3 K exhibits a distinct increase from ≈150 Oe to ≈450 Oe after air exposure, and such variation is attributed to the formation of an oxidized layer in FGT by analyzing the cross-sectional microstructure. The HEB is successfully tuned by changing the FGT/CrOCl thickness and the cooling field. Furthermore, a larger HEB of ≈750 Oe at 1.7 K in FGT/CrOCl heterostructure through RMCD measurements is observed, and it is proposed that the larger HEB in RMCD measurements is related to the distribution of uncompensated spins at the interface. This work reveals several intriguing phenomena of the exchange bias effect in 2D vdW magnetic systems, which paves the way for the study of related spintronic devices.

van der Waals Magnets: Material Family, Detection and Modulation of Magnetism, and Perspective in Spintronics.

van der Waals (vdW) materials exhibit great potential in spintronics, arising from their excellent spin transportation, large spin-orbit coupling, and high-quality interfaces. The recent discovery of intrinsic vdW antiferromagnets and ferromagnets has laid the foundation for the construction of all-vdW spintronic devices, and enables the study of low-dimensional magnetism, which is of both technical and scientific significance. In this review, several representative families of vdW magnets are introduced, followed by a comprehensive summary of the methods utilized in reading out the magnetic states of vdW magnets. Thereafter, it is shown that various electrical, mechanical, and chemical approaches are employed to modulate the magnetism of vdW magnets. Finally, the perspective of vdW magnets in spintronics is discussed and an outlook of future development direction in this field is also proposed.

Highly Sensitive Polarization Photodetection Using a Pseudo-One-Dimensional Nb(1- x)Ti xS3 Alloy.

Low-symmetry layered two-dimensional (2D) materials with strong in-plane optical anisotropy can potentially be applied for polarization photodetection. This is especially true for those 2D materials with a direct band gap, which can efficiently absorb light with specific axial polarization. However, discovering such new anisotropic 2D materials with a direct band structure is still extremely challenging. Here, we fabricate a photodetector using a pseudo-one-dimensional (pseudo-1D) Nb(1- x)Ti xS3 alloy device and demonstrate that it is highly sensitive to the polarized light because of the strong in-plane optical anisotropy and direct band gap of the alloy by combining angle-resolved polarization Raman spectroscopy, azimuth-dependent reflectance difference microscopy, polarization-dependent absorption spectroscopy, and hybrid functional theory calculations. As a consequence, the polarization photodetector of the Nb(1- x)Ti xS3 alloy shows a large photocurrent anisotropic ratio and a high photoresponse. The choice of a low-symmetry layered pseudo-1D Nb(1- x)Ti xS3 alloy in polarization photodetection might open up new functionalities for novel optoelectronic device applications.

Synthesis of low-symmetry 2D Ge(1-x)SnxSe2 alloy flakes with anisotropic optical response and birefringence.

Low-symmetry two-dimensional (2D) materials with unique in-plane anisotropy can promote both fundamental science and practical applications in optics, optoelectronics, electronics, and polarization detection. As a member of 2D materials, doping/alloying material systems have gained great attention owing to the tunable bandgap and special properties. However, the in-plane anisotropic optical and electrical properties of these 2D alloy materials have rarely been reported. In this work, low-symmetry 2D Ge(1-x)SnxSe2 (x = 0-1.0) alloy flakes have been synthesized by chemical vapor deposition (CVD) with a bandgap varying from 1.55 eV (GeSe2, x = 0) to 1.90 eV (SnSe2, x = 1.0). Angle-resolved polarized Raman spectroscopy (ARPRS) is used to confirm the in-plane vibrational anisotropy, and azimuth-dependent reflectance difference microscopy (ADRDM) is applied to visualize the in-plane optical anisotropy. Polarization-dependent transmission spectroscopy (PDTS) is carried out to reflect the in-plane absorptional anisotropy and linear dichroism, and birefringence characteristics are also found in the subsequent studies. All of the results indicate the unique in-plane optical anisotropy and birefringence characteristics of the 2D Ge(1-x)SnxSe2 alloy flakes, providing new opportunities for polarization-controlled devices, optical wave plates, and polarizers.

Magnetism and Optical Anisotropy in van der Waals Antiferromagnetic Insulator CrOCl.

van der Waals (vdW) magnetic insulators are of significance in both fundamental research and technological application, but most two-dimensional (2D) vdW magnetic systems are unstable and of high lattice symmetry. Stable 2D vdW magnetic insulators with anisotropic structure are needed to modulate the properties and unlock potential applications. Here we present a stable vdW antiferromagnetic material, CrOCl, with low-symmetry orthorhombic structure, and investigate systematically its magnetism, phase transition behavior, and optical anisotropy. Spin-phonon coupling effects are uncovered by the abnormal frequency shifts of Raman-active modes, suggesting the formation of a magnetic superstructure. The sizable abnormal change of interplanar spacing indicates the presence of a structural transition at around 27 K. Further in-plane vibrational, reflectional, and absorptional anisotropic properties are explored both experimentally and theoretically, revealing a highly polarization sensitive characteristic and linear dichroism in 2D CrOCl. Meanwhile, the particularly high polarization dependency of the second-harmonic generation and the nonlinear susceptibility of ∼2.24 × 10-11 m/V make it suitable in the field of polarization-dependent nonlinear optics. The findings on the intricate properties of 2D CrOCl lay foundations for future applications of low-symmetry vdW magnets in spin-dependent electronic and optoelectronic devices.

In-Plane Optical Anisotropy and Linear Dichroism in Low-Symmetry Layered TlSe.

In-plane anisotropy of layered materials adds another dimension to their applications, opening up avenues in diverse angle-resolved devices. However, to fulfill a strong inherent in-plane anisotropy in layered materials still poses a significant challenge, as it often requires a low-symmetry nature of layered materials. Here, we report the fabrication of a member of layered semiconducting AIIIBVI compounds, TlSe, that possesses a low-symmetry tetragonal structure and investigate its anisotropic light-matter interactions. We first identify the in-plane Raman intensity anisotropy of thin-layer TlSe, offering unambiguous evidence that the anisotropy is sensitive to crystalline orientation. Further in-situ azimuth-dependent reflectance difference microscopy enables the direct evaluation of in-plane optical anisotropy of layered TlSe, and we demonstrate that the TlSe shows a linear dichroism under polarized absorption spectra arising from an in-plane anisotropic optical property. As a direct result of the linear dichroism, we successfully fabricate TlSe devices for polarization-sensitive photodetection. The discovery of layered TlSe with a strong in-plane anisotropy not only facilitates its applications in linear dichroic photodetection but opens up more possibilities for other functional device applications.

Enhanced Electrical and Optoelectronic Characteristics of Few-Layer Type-II SnSe/MoS2 van der Waals Heterojunctions.

van der Waals heterojunctions formed by stacking various two-dimensional (2D) materials have a series of attractive physical properties, thus offering an ideal platform for versatile electronic and optoelectronic applications. Here, we report few-layer SnSe/MoS2 van der Waals heterojunctions and study their electrical and optoelectronic characteristics. The new heterojunctions present excellent electrical transport characteristics with a distinct rectification effect and a high current on/off ratio (∼1 × 105). Such type-II heterostructures also generate a self-powered photocurrent with a fast response time (<10 ms) and exhibit high photoresponsivity of 100 A W-1, together with high external quantum efficiency of 23.3 × 103% under illumination by 532 nm light. Photoswitching characteristics of the heterojunctions can be modulated by bias voltage, light wavelength, and power density. The designed novel type-II van der Waals heterojunctions are formed from a combination of a transition-metal dichalcogenide and a group IV-VI layered 2D material, thereby expanding the library of ultrathin flexible 2D semiconducting devices.