Removal of tetracycline in the water by a kind of S/N co-doped tea residue biochar.

Tetracycline (TC) is widely present in the environment, and adsorption technology is a potential remediation method. S/N co-doped tea residue biochar (SNBC) was successfully prepared by hydrothermal carbonization method using tea residue as raw material. S was doped by Na2S2O3·5H2O, and N was doped by N in tea residue. The adsorption efficiency of SNBC could reach 94.16% when the concentration of TC was 100 mg L-1. The adsorption effect of SNBC on TC was 9.38 times more than that of unmodified biochar. Tea biochar had good adsorption effect at pH 4-9. The maximum adsorption capacity of 271 mg g-1 was calculated by the Langmuir isotherm model. The adsorption mechanism involved many mechanisms such as pore filling, π-π interaction and hydrogen bonding. The adsorbent prepared in this study could be used as an effective adsorbent in the treatment of TC wastewater.

Real-World Emission Characteristics of Full-Volatility Organics Originating from Nonroad Agricultural Machinery during Agricultural Activities.

Nonroad agricultural machinery (NRAM) emissions constitute a significant source of air pollution in China. Full-volatility organics originating from 19 machines under 6 agricultural activities were measured synchronously. The diesel-based emission factors (EFs) for full-volatility organics were 4.71 ± 2.78 g/kg fuel (average ± standard deviation), including 91.58 ± 8.42% volatile organic compounds (VOCs), 7.94 ± 8.16% intermediate-volatility organic compounds (IVOCs), 0.28 ± 0.20% semivolatile organic compounds (SVOCs), and 0.20 ± 0.16% low-volatility organic compounds (LVOCs). Full-volatility organic EFs were significantly reduced by stricter emission standards and were the highest under pesticide spraying activity. Our results also demonstrated that combustion efficiency was a potential factor influencing full-volatility organic emissions. Gas-particle partitioning in full-volatility organics could be affected by multiple factors. Furthermore, the estimated secondary organic aerosol formation potential based on measured full-volatility organics was 143.79 ± 216.80 mg/kg fuel and could be primarily attributed to higher-volatility-interval IVOCs (bin12-bin16 contributed 52.81 ± 11.58%). Finally, the estimated emissions of full-volatility organics from NRAM in China (2021) were 94.23 Gg. This study provides first-hand data on full-volatility organic EFs originating from NRAM to facilitate the improvement of emission inventories and atmospheric chemistry models.

Real-world emission characteristics of carbonyl compounds from agricultural machines based on a portable emission measurement system.

Emissions of carbonyl compounds from agricultural machines cannot be ignored. Carbonyl compounds can cause the formation of ozone (O3) and secondary organic aerosols, which can cause photochemical smog to form. In this study, 20 agricultural machines were tested using portable emission measurement system (PEMS) under real-world tillage processes. The exhaust gases were sampled using 2,4-dinitrophenylhydrazine cartridges, and 15 carbonyl compounds were analyzed by high-performance liquid chromatography. Carbonyl compound emission factors for agricultural machines were 51.14-3315.62 mg/(kg-fuel), and were 2.58 ± 2.05, 0.86 ± 1.07 and 0.29 ± 0.20 g/(kg-fuel) for China 0, China II and China III emission standards, respectively. Carbonyl compound emission factor for sowing seeds of China 0 agricultural machines was 3.32 ± 1.73 g/(kg-fuel). Formaldehyde, acetaldehyde and acrolein were the dominant carbonyl compounds emitted. Differences in emission standards and tillage processes impact ozone formation potential (OFP). The mean OFP was 20.15 ± 16.15 g O3/(kg-fuel) for the China 0 emission standard. The OFP values decreased by 66.9% from China 0 to China II, and 67.4% from China II to China III. The mean OFP for sowing seeds of China 0 agricultural machines was 25.92 ± 13.84 g O3/(kg-fuel). Between 1.75 and 24.22 times more ozone was found to be formed during sowing seeds than during other processes for China 0 and China II agricultural machines. Total carbonyl compound emissions from agricultural machines in China was 19.23 Gg in 2019. The results improve our understanding of carbonyl compound emissions from agricultural machines in China.

Chemical characterization of volatile organic compounds (VOCs) emitted from multiple cooking cuisines and purification efficiency assessments.

Cooking process can produce abundant volatile organic compounds (VOCs), which are harmful to environment and human health. Therefore, we conducted a comprehensive analysis in which VOCs emissions from multiple cuisines have been sampled based on the simulation and acquisition platform, involving concentration characteristics, ozone formation potential (OFP) and purification efficiency assessments. VOCs emissions varied from 1828.5 to 14,355.1 µg/m3, with the maximum and minimum values from Barbecue and Family cuisine, respectively. Alkanes and alcohol had higher contributions to VOCs from Sichuan and Hunan cuisine (64.1%), Family cuisine (66.3%), Shandong cuisine (69.1%) and Cantonese cuisine (69.8%), with the dominant VOCs species of ethanol, isobutane and n-butane. In comparison, alcohols (79.5%) were abundant for Huaiyang cuisine, while alkanes (19.7%), alkenes (35.9%) and haloalkanes (22.9%) accounted for higher proportions from Barbecue. Specially, carbon tetrachloride, n-hexylene and 1-butene were the most abundant VOCs species for Barbecue, ranging from 8.8% to 14.6%. The highest OFP occurred in Barbecue. The sensitive species of OFP for Huaiyang cuisine were alcohols, while other cuisines were alkenes. Purification efficiency assessments shed light on the removal differences of individual and synergistic control technologies. VOCs emissions exhibited a strong dependence on the photocatalytic oxidation, with the removal efficiencies of 29.0%-54.4%. However, the high voltage electrostatic, wet purification and mechanical separation techniques played a mediocre or even counterproductive role in the VOCs reduction, meanwhile collaborative control technologies could not significantly improve the removal efficiency. Our results identified more effective control technologies, which were conductive to alleviating air pollution from cooking emissions.

A state-of-the-art review of CO2 enhanced oil recovery as a promising technology to achieve carbon neutrality in China.

Although there are some review papers on carbon capture, utilization and storage (CCUS), hardly any of these reviews are focused on the role of CO2 enhanced oil recovery (EOR) in accelerating carbon neutrality in China. In this review, strategies to achieve carbon neutrality is briefly but critically discussed, followed by a review of CO2-EOR as a promising technology. Especially, data analysis, including the number of publications on China's carbon neutrality, per capita CO2 emissions, China's power generation, and the crude oil production of China's large oilfields, is carried out to make the discussion more comprehensive. Given the large amount of coal consumed in China, the high percent of electricity generated with coal, and the slow penetration of renewables already observed, it seems unlikely that 2060 targets will be met without CCUS. In order to achieve carbon neutrality, both reduction in carbon emissions and increase in carbon sequestration are inevitable. Furthermore, it is concluded that CO2 storage through EOR is likely to have a bright future. However, there are some critical issues to be solved, including the technical issues, leakage and safety issues, cost issues, policy issues, etc. In order to turn CO2-EOR into a reliable and more favorable technology, more research and efforts are needed to solve these issues, including advancing carbon capture technologies, improving storage technologies, developing effective monitoring technologies, deploying government support and incentive policies, etc.

Source apportionment and ecological and health risk mapping of soil heavy metals based on PMF, SOM, and GIS methods in Hulan River Watershed, Northeastern China.

Heavy metals in agricultural soils not only affect the food security and soil security, but also endanger the human health through the food chain. Based on the incorporation of index analysis, positive matrix factorization (PMF), self-organizing map (SOM), and geostatistical methods, this research performed the assessment of source apportionment and ecological and health risks of soil heavy metals in Hulan River Watershed, Northeastern China. According to the Pollution Load Index (PLI), 83.08% of the soil samples were slightly or mildly polluted, and 1.54% of the soil samples were severely polluted. The ecological risk index (EI) showed that about 80.77% and 60.77% of the soil samples were beyond the low risk level for Hg and Cd, respectively. In this research, the non-carcinogenic and carcinogenic risk indices for children were higher than adult males and adult females. Four potential sources were revealed based on the PMF and SOM analysis including atmospheric deposition and industrial emission; transportation source; agricultural source; and a combination of agricultural, industrial, and natural sources. Considerable and high ecological risk from Hg existed in the area close to the coal steam-electric plant, and considerable and high ecological risk from Cd existed in the Hulan River estuary area. The eastern part of the study area experienced higher non-carcinogenic and carcinogenic risks for adults and children than the western part of the study area. The source apportionment and ecological and health risk mapping provide important role in reducing pollution sources. Zonal pollution control and soil restoration measures should be performed in the areas with high ecological and health risks.

Digital soil mapping of soil total nitrogen based on Landsat 8, Sentinel 2, and WorldView-2 images in smallholder farms in Yellow River Basin, China.

Predicting spatial explicit information of soil nutrients is critical for sustainable soil management and food security under climate change and human disturbance in agricultural land. Digital soil mapping (DSM) techniques can utilize soil-landscape information from remote sensing data to predict the spatial pattern of soil nutrients, and it is important to explore the effects of remote sensing data types on DSM. This research utilized Landsat 8 (LT), Sentinel 2 (ST), and WorldView-2 (WV) remote sensing data and employed partial least squares regression (PLSR), random forest (RF), and support vector machine (SVM) algorithms to characterize the spatial pattern of soil total nitrogen (TN) in smallholder farm settings in Yellow River Basin, China. The overall relationships between TN and spectral indices from LT and ST were stronger than those from WV. Multiple red edge band-based spectral indices from ST and WV were relevant variables for TN, while there were no red band-based spectral indices from ST and WV identified as relevant variables for TN. Soil moisture and vegetation were major driving forces of soil TN spatial distribution in this area. The research also concluded that farmlands of crop rotation had relatively higher TN concentration compared with farmlands of monoculture. The soil prediction models based on WV achieved relatively lower model performance compared with those based on ST and LT. The effects of remote sensing data spectral resolution and spectral range on enhancing soil prediction model performance are higher than the effects of remote sensing data spatial resolution. Soil prediction models based on ST can provide location-specific soil maps, achieve fair model performance, and have low cost. This research suggests DSM research utilizing ST has relatively high prediction accuracy, and can produce soil maps that are fit for the spatial explicit soil management for smallholder farms.

Variation characteristics of fine particulate matter and its components in diesel vehicle emission plumes.

A rapid reaction occurs near the exhaust nozzle when vehicle emissions contact the air. Twenty diesel vehicles were studied using a new multipoint sampling system that is suitable for studying the exhaust plume near the exhaust nozzle. The variation characteristics of fine particle matter (PM2.5) and its components in diesel vehicle exhaust plumes were analyzed. The PM2.5 emissions gradually increased with increasing distance from the nozzle in the plume. Elemental carbon emissions remained basically unchanged, organic carbon and total carbon (TC) increased with increasing distance. The concentrations of SO42-, NO3- and NH4+ (SNA) directly emitted by the vehicles were very low but increased rapidly in the exhaust plume. The selective catalytic reduction (SCR) reduced 42.7% TC, 40% NO3- emissions, but increased 104% SO42- and 36% NH4+ emissions, respectively. In summary, the SCR reduced 29% primary PM2.5 emissions for the tested diesel vehicles. The NH4NO3 particle formation maybe more important in the plume, and there maybe other forms of formation of NH4+ (eg. NH4Cl). The generation of secondary organic carbon (SOC) plays a leading role in the generation of secondary PM2.5. The SCR enhanced the formation of SOC and SNA in the plume, but comprehensive analysis shows that the SCR more enhanced the SNA formation in the plume, which is mainly new particles formation process. The inconsistency between secondary organic aerosol (SOA) and primary organic aerosol definitions is one of the important reasons for the difference between SOA simulation and observation.

Particle Size and Mixing State of Freshly Emitted Black Carbon from Different Combustion Sources in China.

Modeling studies have highlighted that accurate simulations of radiative effect of black carbon (BC) require knowledge about the particle size and mixing state of freshly emitted BC from combustion sources. However, the information is absent in China due to lack of available measurements. In this study, we present the particle size and mixing state of fresh BC emitted from diesel vehicles (DV), brick kilns (BK), residential crop residue burnings (CR), and residential firewood burnings (FW) in September-October 2014 at North China Plain by field measurement. The mass median diameters of BC cores (whole particles including cores and coatings) above the limit of measurement (i.e., > 70 nm) from these sources are ∼155 (∼194), ∼230 (∼306), ∼250 (∼438) and ∼273 (∼426) nm, respectively, and corresponding size ratios (i.e., mixing state) are ∼1.25, ∼1.33, ∼1.75, and ∼1.56, respectively. Compared with the values commonly used in model based on the laboratory experiments and the field measurements in developed countries, larger particle sizes and higher mixing sate of freshly emitted BC in China may enhance their light absorption and cloud condensation nuclei activities during atmospheric transport. The available data could be used to improve future model development on radiative effect of BC in China.

Development of database of real-world diesel vehicle emission factors for China.

A database of real-world diesel vehicle emission factors, based on type and technology, has been developed following tests on more than 300 diesel vehicles in China using a portable emission measurement system. The database provides better understanding of diesel vehicle emissions under actual driving conditions. We found that although new regulations have reduced real-world emission levels of diesel trucks and buses significantly for most pollutants in China, NOx emissions have been inadequately controlled by the current standards, especially for diesel buses, because of bad driving conditions in the real world. We also compared the emission factors in the database with those calculated by emission factor models and used in inventory studies. The emission factors derived from COPERT (Computer Programmer to calculate Emissions from Road Transport) and MOBILE may both underestimate real emission factors, whereas the updated COPERT and PART5 (Highway Vehicle Particulate Emission Modeling Software) models may overestimate emission factors in China. Real-world measurement results and emission factors used in recent emission inventory studies are inconsistent, which has led to inaccurate estimates of emissions from diesel trucks and buses over recent years. This suggests that emission factors derived from European or US-based models will not truly represent real-world emissions in China. Therefore, it is useful and necessary to conduct systematic real-world measurements of vehicle emissions in China in order to obtain the optimum inputs for emission inventory models.

A review on the alternatives to antibiotics and the treatment of antibiotic pollution: Current development and future prospects.

Antibiotics, widely used in the fields of medicine, animal husbandry, aquaculture, and agriculture, pose a serious threat to the ecological environment and human health. To prevent antibiotic pollution, efforts have been made in recent years to explore alternative options for antibiotics in animal feed, but the effectiveness of these alternatives in replacing antibiotics is not thoroughly understood due to the variation from case to case. Furthermore, a systematic summary of the specific applications and limitations of antibiotic removal techniques in the environment is crucial for developing effective strategies to address antibiotic contamination. This comprehensive review summarized the current development and potential issues on different types of antibiotic substitutes, such as enzyme preparations, probiotics, and plant extracts. Meanwhile, the existing technologies for antibiotic residue removal were discussed under the scope of application and limitation. The present work aims to highlight the strategy of controlling antibiotics from the source and provide valuable insights for green and efficient antibiotic treatment.

Natural antibacterial membranes prepared using Schisandra chinensis extracts and polyvinyl alcohol in an environment-friendly manner.

Foodborne pathogens can cause food spoilage and lead to food safety issues. In recent years, food packaging has received a lot of attention. Traditional packaging membranes are non-biodegradable and remain in the environment for a long time. In this study, natural antimicrobial substances were extracted from Schisandra chinensis by a green extraction process using distilled water as the solvent, and the effects of different treatment on the antimicrobial activity of the extract were compared. At the same time, four types of Schisandra chinensis antimicrobial membranes were prepared using polyvinyl alcohol (PVA) as the substrate. The whole extraction and membrane preparation process did not involve organic solvents, making the process green and environment friendly. Material characterization included inverted biological microscopy, scanning electron microscopy (SEM), atomic force microscopy (AFM), Fourier transform infrared spectroscopy (FTIR), tensile strength test, pore size measurement, water uptake test, etc. Among them, no extract particles were observed with the naked eye on the surfaces of MⅡ and MⅣ. MⅡ has a uniformly transparent, nearly colorless morphology and is the most tensile. MⅣ surface is flat and smooth, the microstructure is dense and uniform. At the same time, the four types of membranes were tested against common pathogenic bacteria for 12 h, and the OD600 trend revealed the excellent antimicrobial activity of the membranes against S. aureus, MRSA, E. coli, and L. monocytogenes. The membranes could also be reused at least once. This study provides a new idea for preparing natural plant-based antimicrobial membranes.

Database of emission factors of volatile organic compound (VOC) species in motor vehicle exhaust in China.

The synergistic strategy for fine particulate matter (PM2.5) and O3 pollution prevention and control has emerged as a pivotal approach in combating air pollution. Volatile organic compounds (VOCs) serve as crucial precursors to both O3 and secondary organic aerosols (SOAs), with motor vehicles representing one of their significant sources. In this study, a standard for establishing a database of VOC species emission factors for motor vehicles was developed, and a database containing 134 VOC species was constructed through field tests and literature surveys. The VOC emissions of light-duty gasoline passenger vehicles (LDGPVs) comprised primarily alkanes and aromatics. The VOC emissions of light-duty diesel trucks (LDDTs) comprised mostly alkanes. Regarding low-speed trucks, 3-wheel vehicles, medium-duty diesel trucks (MDDTs) and heavy-duty diesel trucks (HDDTs), their VOC emissions comprised mainly oxygenated volatile organic compounds (OVOCs). The update of emission standards resulted in a reduction in VOC species emission factors while altering the composition of VOCs. Attention should be directed toward isopentane, benzene and dichloromethane emitted by LDGPVs, dodecane, undecane, ethene and propene emitted by LDDTs, and acetaldehyde emitted by HDDTs. VOC species originating from LDGPVs were more dispersed than those originating from LDDTs and HDDTs. In addition, variations in VOC species were observed among motor vehicles with different fuel types. Toluene, ethene, benzene, m,p-xylene, isopentane, hexanal, ethyne and 1,2,4-trimethylbenzene were the predominant VOC species emitted by gasoline vehicles. Diesel vehicles emitted mainly dodecane, formaldehyde, propene, undecane, acetaldehyde, ethene, decane and benzene. The results could enhance our comprehension of the emission characteristics of VOC species originating from motor vehicles and provide data support and a scientific foundation for achieving synergistic PM2.5 and O3 pollution prevention and control.

Copper-decorated strategy based on defect-rich NH2-MIL-125(Ti) boosts efficient photocatalytic degradation of methyl mercaptan under sunlight.

Photocatalysis has received significant attention as a technology that can solve environmental problems. Metal-organic frameworks are currently being used as novel photocatalysts but are still limited by the rapid recombination of photogenerated carriers, low photogenerated electron migration efficiency and poor solar light utilization rate. In this work, a novel photocatalyst was successfully constructed by introducing Cu species into thermal activated mixed-ligand NH2-MIL-125 (Ti) via defect engineering strategy. The constructed defect structure not only provided 3D-interconnected gas transfer channels, but also offered suitable space to accommodate introduced Cu species. For the most effective photocatalyst 0.2Cu/80%NH2-MIL-125 (300 °C) with optimized Cu content, the photocatalytic degradation rate of CH3SH achieved 4.65 times higher than that of pristine NH2-MIL-125 under visible light (λ > 420 nm). At the same time, it showed great degradation efficiency under natural sunlight, 100 ppm CH3SH was completely removed within 25 min in full solar light illumination. The improved catalytic efficiency is mainly due to the synergistic effect of the integrated Schottky junction and rich-defective NH2-MIL-125, which improved the bandgap and band position, and thus facilitated the separation and transfer of the photo-generated carriers. This work provided a facile way to integrate Schottky junctions and rich-defective MOFs with high stability. Due to its excellent degradation performance under sunlight, it also offered a prospective strategy for rational design of high-efficiency catalysts applied in environmental technologies.

Impacts of temporary traffic control measures on vehicular emissions during the Asian games in Guangzhou, China.

UNLABELLED: To guarantee good traffic and air quality during the 16th Asian Games in Guangzhou, China, the government carried out two traffic control Drills before the Games and adopted traffic control measures during the Games. Vehicle activities before and during the first and second Drills, and during the Games, were surveyed. Based on the data under investigation, the impacts of control measures on traffic volumes and driving characteristics were analyzed during the first and second Drills, and the Games. The emission reduction of traffic control measures was also evaluated during the three stages using the MOBILE-China model. The results show that there were significant effects of implementing temporary traffic control measures on transportation activity and vehicular emissions. During the first and second Drills, and the Games, the average traffic volumes in monitored roads decreased, and the average speed of vehicles increased significantly The co-effects of traffic flow reduction, traffic congestion improvement, and the banning of high-emitting vehicles helped to greatly reduce the estimated emissions from motor vehicles in Guangzhou during the first and second Drills, and the Games. Estimated vehicular emissions were reduced by 38-52% during the first Drill and 28-36% for the second Drill. During the Asian Games, vehicular emissions of carbon monoxide (CO), hydrocarbon (HC), oxides of nitrogen (NO), and particulate matter with an aerodynamic diameter < 10 microm (PM10) reduced by an estimated 42%, 46%, 26%, and 30%, respectively, compared with those before the Games. Both the banning of high-emitting vehicles and the travel restrictions imposed by use of odd-even licenses had significant effects on the reduction of vehicular emissions of CO, HC, NOx, and PM10. IMPLICATIONS: Motor vehicles have become the most prevalent source of emissions and subsequently air pollution within Chinese cities. Understanding the impacts that different control measures have on vehicular emissions is very important in order to be able to control vehicle emissions. The results of this study will be very helpful for the further control of vehicle emissions in Guangzhou in the future. In addition, the effects of temporary transportation control measures will provide important awareness to other cities that will be hosting large-scale activities similar to the Asian Games.

Synthesis and application of quantum dots in detection of environmental contaminants in food: A comprehensive review.

Environmental pollutants can accumulate in the human body through the food chain, which may seriously impact human health. Therefore, it is of vital importance to develop quick, simple, accurate and sensitive (respond quickly) technologies to evaluate the concentration of environmental pollutants in food. Quantum dots (QDs)-based fluorescence detection methods have great potential to overcome the shortcomings of traditional detection methods, such as long detection time, cumbersome detection procedures, and low sensitivity. This paper reviews the types and synthesis methods of QDs with a focus on green synthesis and the research progress on rapid detection of environmental pollutants (e.g., heavy metals, pesticides, and antibiotics) in food. Metal-based QDs, carbon-based QDs, and "top-down" and "bottom-up" synthesis methods are discussed in detail. In addition, research progress of QDs in detecting different environmental pollutants in food is discussed, especially, the practical application of these methods is analyzed. Finally, current challenges and future research directions of QDs-based detection technologies are critically discussed. Hydrothermal synthesis of carbon-based QDs with low toxicity from natural materials has a promising future. Research is needed on green synthesis of QDs, direct detection without pre-processing, and simultaneous detection of multiple contaminants. Finally, how to keep the mobile sensor stable, sensitive and easy to store is a hot topic in the future.

Aflatoxin detection technologies: recent advances and future prospects.

Aflatoxins have posed serious threat to food safety and human health. Therefore, it is important to detect aflatoxins in samples rapidly and accurately. In this review, various technologies to detect aflatoxins in food are discussed, including conventional ones such as thin-layer chromatography (TLC), high performance liquid chromatography (HPLC), enzyme linked immunosorbent assay (ELISA), colloidal gold immunochromatographic assay (GICA), radioimmunoassay (RIA), fluorescence spectroscopy (FS), as well as emerging ones (e.g., biosensors, molecular imprinting technology, surface plasmon resonance). Critical challenges of these technologies include high cost, complex processing procedures and long processing time, low stability, low repeatability, low accuracy, poor portability, and so on. Critical discussion is provided on the trade-off relationship between detection speed and detection accuracy, as well as the application scenario and sustainability of different technologies. Especially, the prospect of combining different technologies is discussed. Future research is necessary to develop more convenient, more accurate, faster, and cost-effective technologies to detect aflatoxins.

Antibiotic residues in milk and dairy products in China: occurrence and human health concerns.

Although veterinary antibiotics are essential in preventing and treating clinical diseases in cattle, the frequent use of antibiotics leads to antibiotic residues in milk and dairy products, consequently threatening human health. The massive milk consumption makes it necessary to assess antibiotic pollution and health impact comprehensively. Hence, we conducted a systematic review to evaluate antibiotics in milk and dairy products and their potential health risk. We searched four databases using multiple keyword combinations to retrieve 1582 pieces of literature and finally included eighteen articles to analyze antibiotic residues in milk and dairy products. These studies detected seven antibiotics in different regions of China. Quinolones and ß-lactam antibiotics exceeded the MRL for raw and commercial milk. The maximum levels of sulfonamides and tetracyclines were detected in the same raw milk sample, exceeding the MRL. The estimated THQ and HI values in milk and dairy products are less than 1 for adults, indicating negligible noncarcinogenic health risk of antibiotics through consuming milk and dairy products. Children face higher health risks than adults, with the HI and THQ of quinolones exceeding 1. It is worth noting that quinolones accounted for nearly 89% of health risks associated with all antibiotics. Finally, we put forward possible research directions in the future, such as specific health effects of total dietary exposure to low levels of antibiotics. In addition, policymakers should effectively improve this problem from the perspectives of antibiotic use supervision, antibiotic residue analysis in food, and continuous environmental monitoring and control.

Reduced rural residential emissions in the Northern China Plain from 2015 to 2021.

China's rapid economic growth over the past few decades has been fueled by the fossil-fuel dominated energy system. In Northern China, coal and biomass are important fuel types for household cooking and heating. The use of coal and biomass not only contributes to CO2 emissions, but also worsens the ambient air quality and further causes adverse health outcomes. Since 2016, action plans have been implemented annually to promote the substitution of solid fuel use in the rural households of the Beijing-Tianjin-Hebei and surrounding region ("2 + 26" region). However, a comprehensive evaluation of the emission reductions by the control policies is still lacking. In this study, we built a rural residential emission inventory in the "2 + 26" region based on two-phase national household surveys in 2010 and 2015. We evaluated the air pollutant and CO2 reduction benefits of various control measures from 2015 to 2021 and discussed the opportunities for the synergistical control of air pollutant and CO2 emissions. We estimated that, in 2015, the coal and biomass fuel consumption from rural households in the "2 + 26" region was 28.7 Mt. and 30.6 Mt., respectively, which resulted in 93.8 Mt., 416.5kt, 402.5kt, 80.1kt, 268.0kt, and 6122.2kt of CO2, PM2.5, SO2, NOx, VOCs, and CO emissions. With the implementation of household solid fuel substitution policies, air pollutant emissions were estimated to decrease by 53- 74 % from 2015 to 2021, while the percentage reduction of CO2 was only 39 % due to additional emissions from the alternative clean energy sources. If biomass was treated as carbon-neutral fuel, the CO2 reducing potential was even lower. Building a clean and sustainable rural energy system is a multi-win option for China to achieve the "Beautiful China", "Healthy China" and carbon-neutrality goals.

Enantioselective Behaviors of Chiral Pesticides and Enantiomeric Signatures in Foods and the Environment.

Unreasonable application of pesticides may result in residues in the environment and foods. Chiral pesticides consist of two or more enantiomers, which may exhibit different behaviors. This Review intends to provide progress on the enantioselective residues of chiral pesticides in foods. Among the main chiral analytical methods, high performance liquid chromatography (HPLC) is the most frequently utilized. Most chiral pesticides are utilized as racemates; however, due to enantioselective dissipation, bioaccumulation, biodegradation, and chiral conversion, enantiospecific residues have been found in the environment and foods. Some chiral pesticides exhibit strong enantioselectivity, highlighting the importance of evaluation on an enantiomeric level. However, the occurrence characteristics of chiral pesticides in foods and specific enzymes or transport proteins involved in enantioselectivity needs to be further investigated. This Review could help the production of some chiral pesticides to single-enantiomer formulations, thereby reducing pesticide consumption as well as increasing food production and finally reducing human health risks.