3D-Printed Mullite-Reinforced SiC-Based Aerogel Composites.

There is a growing demand for thermal management materials in electronic fields. Aerogels have attracted interest due to their extremely low density and extraordinary thermal insulation properties. However, the application of aerogels is limited by high production costs and the requirement that aerogel structures not be load-bearing. In this study, mullite-reinforced SiC-based aerogel composite (MR-SiC AC) is prepared through 3D printing combined with in situ growth of SiC nanowires in post processing. The fabricated MR-SiC AC not only has ultra-low thermal conductivity (0.021 W K m-1) and high porosity (90.0%), but also a high Young's modulus (24.4 MPa) and high compressive strength (1.65 MPa), both exceeding the measurements of existing resilient aerogels by an order of magnitude. These properties make MR-SiC AC an ideal solution for the precision thermal management of lightweight structures having complex geometry for functional devices.

Theory-Guided Design of Unconventional Phase Metal Heteronanostructures for Higher-Rate Stable Li-CO2 and Li-Air Batteries.

Lithium-carbon dioxide (Li-CO2) and Li-air batteries hold great potential in achieving carbon neutral given their ultrahigh theoretical energy density and eco-friendly features. However, these Li-gas batteries still suffer from low discharging-charging rate and poor cycling life due to sluggish decomposition kinetics of discharge products especially Li2CO3. Here we report the theory-guided design and preparation of unconventional phase metal heteronanostructures as cathode catalysts for high-performance Li-CO2/air batteries. The assembled Li-CO2 cells with unconventional phase 4H/face-centered cubic (fcc) ruthenium-nickel heteronanostructures deliver a narrow discharge-charge gap of 0.65 V, excellent rate capability and long-term cycling stability over 200 cycles at 250 mA g-1. The constructed Li-air batteries can steadily run for above 150 cycles in ambient air. Electrochemical mechanism studies reveal that 4H/fcc Ru-Ni with high-electroactivity facets can boost redox reaction kinetics and tune discharge reactions towards Li2C2O4 path, alleviating electrolyte/catalyst failures induced by the aggressive singlet oxygen from solo decomposition of Li2CO3.

Photocatalytic disinfection for point-of-use water treatment using Ti3+ self-doping TiO2 nanoparticle decorated ceramic disk filter.

The challenge from pathogenic infections still threatens the health and life of people in developing areas. An efficient, low-cost, and abundant-resource disinfection method is desired for supplying safe drinking water. This study aims to develop a novel Ti3+ doping TiO2 nanoparticle decorated ceramic disk filter (Ti3+/TiO2@CDF) for point-of-use (POU) disinfection of drinking water. The production of Ti3+/TiO2@CDF was optimized to maximize disinfection efficiency and flow rate. Under optimal conditions, the log reduction value (LRV) could reach up to 7.18 and the flaw rate was 108 mL/h. The influences of environmental factors were also investigated. Natural or slightly alkaline conditions, low turbidity, and low concentration of humic acid were favorable for the disinfection of Ti3+/TiO2@CDF, while co-existing HCO3- ions and diatomic cations (Ca2+ and Mg2+) exhibited the opposite effect. Furthermore, the practicability and stability of Ti3+/TiO2@CDF was demonstrated. Ti3+/TiO2@CDF showed high disinfection efficiency for E. coli and S. aureus under a range of concentrations. Long-term experiment indicated that Ti3+/TiO2@CDF was stable. The underlying disinfection mechanisms were investigated and concluded as the combination of retention, adsorption, and photocatalytic disinfection. The developed Ti3+/TiO2@CDF can provide an effective and reliable disinfection tool for POU water treatment in remote area.

Planning electric power system under carbon-price mechanism considering multiple uncertainties - A case study of Tianjin.

The carbon-price mechanism has been proved to be an effective measure for promoting energy revolution and mitigating climate change. It is of vital importance to develop optimal energy development strategy for electric power-dependent regions by considering the complex interaction among carbon price, carbon emission control, and carbon-responsibility transfer. In order to fill the research gap on the optimal choice of carbon-price mechanism at the urban level, this study is the first attempt to express uncertainties embodied in the carbon price mechanism as interval values, probability distribution and downside risks. The developed risk-aversion-based interval two-stage stochastic programming (RITSP) model is effective in analyzing the effect of internal and electric-transmission related carbon-tax on power system structure. It is discovered that carbon compensation policy for imported electricity is more suitable for Tianjin's power system development. Tianjin would primarily purchase electricity from Inner-Mongolia. With the increase of carbon emission tax, Tianjin would import increasing proportion of electricity from Gansu. Due to the limited endowment of renewable energy in Tianjin, the impact of carbon emission limitations on the renewable energy power generation structure of is trivial, and it has a greater impact on stimulating the development of CCS technology. What's more, Tianjin's future power system planning is more inclined to develop CCS rather than renewable energy.

Interactive effects of nanoplastics, multi-contaminants, and environmental conditions on prairie aquatic ecosystems: A factorial composite toxicity analysis within a Canadian context.

Limited data exist on the interactions between nanoplastics (NPs) and co-contaminants under diverse environmental conditions. Herein, a factorial composite toxicity analysis approach (FCTA) was developed to analyze the time-dependent composite effects of NPs (0 ∼ 60 mg/L), copper (Cu, 0.2 ∼ 6 mg/L) and phenanthrene (PHE, 0.001 ∼ 1 mg/L) on microalgae under diverse pH (6.7 ∼ 9.1), dissolved organic matter (DOM, 1.5 ∼ 25.1 mg/L), salinity (1 ∼ 417 mg/L) and temperature (23 ∼ 33 °C) within the Canadian prairie context. The toxic mechanism was revealed by multiple toxic endpoints. The combined toxicity of NPs, Cu and PHE within prairie aquatic ecosystems was assessed by the developed FCTA-multivariate regression model. Contrary to individual effects, NPs exhibited a promotional effect on microalgae growth under complex environmental conditions. Although Cu and PHE were more hazardous, NPs mitigated their single toxicity. Environmental conditions and exposure times significantly influenced the main effects and interactions of NPs, Cu and PHE. The synergistic effect of NPs*Cu and NPs*PHE on microalgae growth became antagonistic with increased pH or DOM. Microalgae in the Souris River, Saskatchewan, were projected to suffer the most toxic effects. Our findings have significant implications for the risk management of NPs.

Hydrogel-Reactive-Microenvironment Powering Reconfiguration of Polymer Architectures.

Reconfiguration of architected structures has great significance for achieving new topologies and functions of engineering materials. Existing reconfigurable strategies have been reported, including approaches based on heat, mechanical instability, swelling, origami/kirigami designs, and electromagnetic actuation. However, these approaches mainly involve physical interactions between the host materials and the relevant stimuli. Herein, a novel, easy-manipulated, and controllable reconfiguration strategy for polymer architectures is proposed by using a chemical reaction of host material within a hydrogel reactive microenvironment. 3D printed polycaprolactone (PCL) lattices transformed in an aqueous polyacrylamide (PAAm) hydrogel precursor solution, in which ultraviolet (UV) light triggered heterogeneous grafting polymerization between PCL and AAm. In situ microscopy shows that PCL beams go through volumetric expansion and cooperative buckling, resulting in transformation of PCL lattices into sinusoidal patterns. The transformation process can be tuned easily and patterned through the adjustment of the PCL beam diameter, unit cell width, and UV light on-off state. Controlling domain formation is achieved by using UV masks. This framework enables the design, fabrication, and programming of architected materials and inspires the development of novel 4D printing approaches.

Comparison of Electrocardiogram between Dilated Cardiomyopathy and Ischemic Cardiomyopathy Based on Empirical Mode Decomposition and Variational Mode Decomposition.

The clinical manifestations of ischemic cardiomyopathy (ICM) bear resemblance to dilated cardiomyopathy (DCM), yet their treatments and prognoses are quite different. Early differentiation between these conditions yields positive outcomes, but the gold standard (coronary angiography) is invasive. The potential use of ECG signals based on variational mode decomposition (VMD) as an alternative remains underexplored. An ECG dataset containing 87 subjects (44 DCM, 43 ICM) is pre-processed for denoising and heartbeat division. Firstly, the ECG signal is processed by empirical mode decomposition (EMD) and VMD. And then, five modes are determined by correlation analysis. Secondly, bispectral analysis is conducted on these modes, extracting corresponding bispectral and nonlinear features. Finally, the features are processed using five machine learning classification models, and a comparative assessment of their classification efficacy is facilitated. The results show that the technique proposed provides a better categorization for DCM and ICM using ECG signals compared to previous approaches, with a highest classification accuracy of 98.30%. Moreover, VMD consistently outperforms EMD under diverse conditions such as different modes, leads, and classifiers. The superiority of VMD on ECG analysis is verified.

Diamond with Sp2-Sp3 composite phase for thermometry at Millikelvin temperatures.

Temperature is one of the seven fundamental physical quantities. The ability to measure temperatures approaching absolute zero has driven numerous advances in low-temperature physics and quantum physics. Currently, millikelvin temperatures and below are measured through the characterization of a certain thermal state of the system as there is no traditional thermometer capable of measuring temperatures at such low levels. In this study, we develop a kind of diamond with sp2-sp3 composite phase to tackle this problem. The synthesized composite phase diamond (CPD) exhibits a negative temperature coefficient, providing an excellent fit across a broad temperature range, and reaching a temperature measurement limit of 1 mK. Additionally, the CPD demonstrates low magnetic field sensitivity and excellent thermal stability, and can be fabricated into probes down to 1 micron in diameter, making it a promising candidate for the manufacture of next-generation cryogenic temperature sensors. This development is significant for the low-temperature physics researches, and can help facilitate the transition of quantum computing, quantum simulation, and other related technologies from research to practical applications.

Coupling High Hardness and Zn Affinity in Amorphous-Crystalline Diamond for Stable Zn Metal Anodes.

The highly reversible plating/stripping of Zn is plagued by dendrite growth and side reactions on metallic Zn anodes, retarding the commercial application of aqueous Zn-ion batteries. Herein, a distinctive nano dual-phase diamond (NDPD) comprised of an amorphous-crystalline heterostructure is developed to regulate Zn deposition and mechanically block dendrite growth. The rich amorphous-crystalline heterointerfaces in the NDPD endow modified Zn anodes with enhanced Zn affinity and result in homogeneous nucleation. In addition, the unparalleled hardness of the NDPD effectively overcomes the high growth stress of dendrites and mechanically impedes their proliferation. Moreover, the hydrophobic surfaces of the NDPD facilitate the desolvation of hydrate Zn2+ and prevent water-mediated side reactions. Consequently, the Zn@NDPD presents an ultrastable lifespan exceeding 3200 h at 5 mA cm-2 and 1 mAh cm-2. The practical application potential of Zn@NDPD is further demonstrated in full cells. This work exhibits the great significance of a chemical-mechanical synergistic anode modification strategy in constructing high-performance aqueous Zn-ion batteries.

Toxicity and mechanism of nanoplastics to phytoplankton in high-latitude aquatic ecosystems of Canadian prairie: Effects of multiple environmental factors.

The potential ecological risks of nanoplastics (NPs) may be inaccurately assessed in some studies as they fail to consider the impact of environmental factors and their interactive effects. Here, the effects of six representative environmental factors (N, P, salinity, DOM (dissolved organic matter), pH and hardness) on NPs' toxicity and mechanism to microalgae are investigated based on the surface water quality data in Saskatchewan watershed, Canada. Our 10 sets of 26-1 factorial analysis reveal the significant factors and their interactive complexity towards 10 toxic endpoints from cellular and molecular levels. This is the first time to study the toxicity of NPs to microalgae under interacting environmental factors in high-latitude aquatic ecosystems of Canadian prairie. We find that microalgae become more resistant to NPs in N-rich or higher pH environments. Surprisingly, with the increase of N concentration or pH, the inhibitory effect of NPs on microalgae growth even became a promotion effect with the decreased inhibition rate from 10.5 % to -7.1 % or from 4.3 % to -0.9 %, respectively. Synchrotron-based Fourier transform infrared spectromicroscopy analysis reveals that NPs can induce alterations in the content and structure of lipids and proteins. DOM, N*P, pH, N*pH and pH*hardness have a statistically significant effect on NPs' toxicity to biomolecular. The toxicity levels of NPs across Saskatchewan watersheds are evaluated and we find that NPs could have the greatest inhibition on microalgae growth in Souris River. Our findings indicate that multiple environmental factors should be considered during the ecological risk assessment of emerging pollutants.

Single-cell microfluidics enabled dynamic evaluation of drug combinations on antibiotic resistance bacteria.

The rapid spread of antibiotic resistance has become a significant threat to global health, yet the development of new antibiotics is outpaced by emerging new resistance. To treat multidrug-resistant bacteria and prolong the lifetime of existing antibiotics, a productive strategy is to use combinations of antibiotics and/or adjuvants. However, evaluating drug combinations is primarily based on end-point checkerboard measurements, which provide limited information to study the mechanism of action and the discrepancies in the clinical outcomes. Here, single-cell microfluidics is used for rapid evaluation of the efficacy and mode of action of antibiotic combinations within 3 h. Focusing on multidrug-resistant Acinetobacter baumannii, the combination between berberine hydrochloride (BBH, as an adjuvant) and carbapenems (meropenem, MEM) or ß-lactam antibiotic is evaluated. Real-time tracking of individual cells to programmable delivered antibiotics reveals multiple phenotypes (i.e., susceptible, resistant, and persistent cells) with fidelity. Our study discovers that BBH facilitates the accumulation of antibiotics within cells, indicating synergistic effects (FICI = 0.5). For example, the combination of 256 mg/L BBH and 16 mg/L MEM has a similar killing effect (i.e., the inhibition rates >90%) as the MIC of MEM (64 mg/L). Importantly, the synergistic effect of a combination can diminish if the bacteria are pre-stressed with any single drug. Such information is vital for understanding the underlying mechanisms of combinational treatments. Overall, our platform provides a promising approach to evaluate the dynamic and heterogenous response of a bacterial population to antibiotics, which will facilitate new drug discovery and reduce emerging antibiotic resistance.

Examining the U-shaped relationship of sleep duration and systolic blood pressure with risk of cardiovascular events using a novel recursive gradient scanning model.

Background: Observational studies have suggested U-shaped relationships between sleep duration and systolic blood pressure (SBP) with risks of many cardiovascular diseases (CVDs), but the cut-points that separate high-risk and low-risk groups have not been confirmed. We aimed to examine the U-shaped relationships between sleep duration, SBP, and risks of CVDs and confirm the optimal cut-points for sleep duration and SBP. Methods: A retrospective analysis was conducted on NHANES 2007-2016 data, which included a nationally representative sample of participants. The maximum equal-odds ratio (OR) method was implemented to obtain optimal cut-points for each continuous independent variable. Then, a novel "recursive gradient scanning method" was introduced for discretizing multiple non-monotonic U-shaped independent variables. Finally, a multivariable logistic regression model was constructed to predict critical risk factors associated with CVDs after adjusting for potential confounders. Results: A total of 26,691 participants (48.66% were male) were eligible for the current study with an average age of 49.43 ± 17.69 years. After adjusting for covariates, compared with an intermediate range of sleep duration (6.5-8.0 h per day) and SBP (95-120 mmHg), upper or lower values were associated with a higher risk of CVDs [adjusted OR (95% confidence interval) was 1.20 (1.04-1.40) for sleep duration and 1.17 (1.01-1.36) for SBP]. Conclusions: This study indicates U-shaped relationships between SBP, sleep duration, and risks of CVDs. Both short and long duration of sleep/higher and lower BP are predictors of cardiovascular outcomes. Estimated total sleep duration of 6.5-8.0 h per day/SBP of 95-120 mmHg is associated with lower risk of CVDs.

Rethinking the effects of micro/nanoplastics from the global environmental change and systematic perspective: An aquatic environmental system-based comprehensive assessment approach of micro/nanoplastic impacts.

The study on micro/nanoplastic pollution should embrace complexity. Here, we aim to develop an aquatic environmental system-based comprehensive assessment approach of micro/nanoplastic impacts (ACAM) to evaluate the effects of micro/nanoplastics on aquatic ecosystems from the global environmental change (GEC) and systematic perspective. A case study for freshwater systems in Saskatchewan, Canada was conducted to evaluate the comprehensive effects of multiple GEC factors (polystyrene-nanoplastics (PS-NPs), N, P, salinity, dissolved organic matter (DOM), pH, hardness) on Asterococcus superbus based on ten ecologically relevant endpoints. It is found that at the cellular level, PS-NPs and N had an antagonistic interaction on microalgal growth in the Saskatchewan freshwater ecosystem; at the molecular level, the PS-NP-induced changes in lipid composition in microalgae were regulated by P, DOM, and pH. The significance ranking of factor effects suggested that instead of PS-NPs pollution, the fluctuations in pH level, DOM and N concentrations should be paid attention to first in Saskatchewan. Under the combined impact of PS-NPs and other GEC factors, microalgae at station 14 (Qu'Appelle River near highway 56) might have the minimum growth rate with [-0.048, 0.094] d-1 in Saskatchewan. These findings demonstrate the efficacy of the developed ACAM in a more comprehensive and context-specific assessment of MNP risks, providing new insight for the management of MNP pollution.

4D Additive-Subtractive Manufacturing of Shape Memory Ceramics.

The development of high-temperature structural materials, such as ceramics, is limited by their extremely high melting points and the difficulty in building complicated architectures. Four-dimensional (4D) printing helps enhance the geometrical flexibility of ceramics. However, ceramic 4D printing systems are limited by the separate processes for shape and material transformations, low accuracy of morphing systems, low resolution of ceramic structures, and their time-intensive nature. Here, a paradigm for a one-step shape/material transformation, high-2D/3D/4D-precision, high-efficiency, and scalable 4D additive-subtractive manufacturing of shape memory ceramics is developed. Original/reverse and global/local multimode shape memory capabilities are achieved using macroscale SiOC-based ceramic materials. The uniformly deposited Al2 O3 -rich layer on the printed SiOC-based ceramic lattice structures results in an unusually high flame ablation performance of the complex-shaped ceramics. The proposed framework is expected to broaden the applications of high-temperature structural materials in the aerospace, electronics, biomedical, and art fields.

Physicochemical change and microparticle release from disposable gloves in the aqueous environment impacted by accelerated weathering.

The explosive growth of disposable gloves usage in cities around the world has posed a considerable risk to municipal solid management and disposal during the COVID-19 pandemic. The lack of the environmental awareness leads to glove waste being discarded randomly and ending up in the soil and/or the ocean ecosystem. To explore the physicochemical changes and environmental behaviors of disposable glove wastes in the aqueous environment, three kinds of glove (latex, nitrile and vinyl) were investigated. The results showed that the physicochemical characteristics of disposable gloves made of different materials were altered to different degrees by UV weathering. Nitrile gloves were more stable than latex and vinyl gloves after being exposed to weathering conditions. Although the chemical structures were not clearly demonstrated through FTIR after weathering, the SEM results showed significant microscopic changes on the surfaces of the gloves. Analysis of the leachate results showed that UV weathered gloves released leachable substances, including microparticles, organic matter, and heavy metals. Latex gloves were more likely to release microparticles and other substances into the water after UV weathering. The release of microparticles from gloves can also be impacted by sand abrasion. The appropriate strategy needs to be developed to mitigate the environmental impact caused by the discarded gloves.

Investigation into the impact of aged microplastics on oil behavior in shoreline environments.

Understanding the interactions between oil and other particles in shoreline can help determine the environmental risk and cleanup strategy after oil spill. Nevertheless, far less has been known regarding the impact of aged MPs on oil behavior in the shoreline environment. In this study, the aging course of polyethylene (PE) in shaking seawater and ultraviolet (UV) radiation conditions was investigated. The seawater aging mainly affected the physical properties of MPs, increasing its surface pores and hydrophilicity. UV aging significantly affected both the physical and chemical properties of MPs, which increased its hydrophilicity and crystallinity, decreased its mean particle size and introduced oxygen-containing functional groups onto MPs. The two-dimensional correlation spectroscopy (2D COS) analysis confirmed the evolution of oxygen-containing functional groups from C-O to CO. The effects of aged MPs on oil behavior in water-sand system were further explored. The oil remaining percentages were non-linearly changed with the increasing aging degree of MPs. The particle size of the aqueous phase after washing was inversely related to the oil remaining percentage. Further FTIR analysis revealed that C-O and C-H functional groups played an important role in the process of oil adsorbed on MPs.

A droplet-based microfluidic approach to isolating functional bacteria from gut microbiota.

Metabolic interactions within gut microbiota play a vital role in human health and disease. Targeting metabolically interacting bacteria could provide effective treatments; however, obtaining functional bacteria remains a significant challenge due to the complexity of gut microbiota. Here, we developed a facile droplet-based approach to isolate and enrich functional gut bacteria that could utilize metabolites from an engineered butyrate-producing bacteria (EBPB) of anti-obesity potential. This involves the high throughput formation of single-bacteria droplets, followed by culturing "droplets" on agar plates to form discrete single-cell colonies. This approach eliminates the need for sophisticated s instruments to sort droplets and thus allows the operation hosted in a traditional anaerobic chamber. In comparison to the traditional culture, the droplet-based approach obtained a community of substantially higher diversity and evenness. Using the conditioned plates containing metabolites from the EBPB supernatant, we obtained gut bacteria closely associated or interacting with the EBPB. These include anaerobic Lactobacillus and Bifidobacterium, which are often used as probiotics. The study illustrates the potential of our approach in the search for the associated bacteria within the gut microbiota and retrieving those yet-to-be cultured.

Development of a calcium alginate-cellulose nanocrystal-based coating to reduce the impact of oil spills on shorelines.

It is well known that oil stranded on shoreline substrates can be difficult to remove and cause serious environmental effects. To address this issue, a calcium alginate-cellulose nanocrystal (CA-CNC)-based coating with a unique surface structure and superhydrophobic properties was developed to reduce the extent of shoreline oiling. The results of batch washing test showed that not only did the introduction of CNC not reduce the oil removal efficiency; it also improved the environmental stability of the coating to resist the effects associated with seawater immersion and erosion (especially in the case of 0.4 wt% of CNC). The oil-repellent performance of the coated gravels implied that both oscillation time and oil concentration had almost no effects on the amount of adhered oil. Assessment of oiling prevention based on the laboratory shoreline tank simulator proved the coated gravel performed very well as more oil floated and less oil remained on substrates and penetrated into the subsurface. Biotoxicity analysis showed that the coating powders reduced impacts on the toxicity of the oil to algae at low doses. There is a good potential for the use of this CA-CNC based coating technique to improve shoreline oil spill response.

Exploring the use of cellulose nanocrystal as surface-washing agent for oiled shoreline cleanup.

Surface-washing agents are an option to enhance the removal of oil spilled or stranded on shorelines. The use of nanocellulose-based nanofluid as a surface-washing agent was studied by investigating its reactivity and effectiveness. Salinity was found to be the most influencial factor to facilitate oil removal with the nanofluids. Cations from salt can promote the adsorption of nanocellulose on the oil/water interface by reducing the surface charges. The experimental results revealed the nanocellulose could be effective at low concentrations but an excess of nanocellulose hindered oil removal due to an increase in fluid viscosity. A miscibility model was applied to verify this finding in a thermodynamics context. The biotoxicity tests showed that nanocellulose-based nanofluid did not have negative effects on algae growth and introducing nanocellulose into an oiled culture medium can actually mitigate the toxicity of the oil on algae. A comparison in removal efficiency with other surfactants demonstrated the potential value for shoreline cleanup due to the superior effectiveness of nanocellulose-based nanofluids. Overall, a nanocellulose has a high potential for application as a surface-washing agent for shoreline cleanup due to the low cost, low toxicity, and high efficiency.

Exploration of nanocellulose washing agent for the green remediation of phenanthrene-contaminated soil.

Polycyclic aromatic hydrocarbons are hazardous contaminants existing ubiquitously in polluted soil. In this study, using nanocellulose (CNC) fluid as an eco-friendly agent was proposed for the first time in the remediation of phenanthrene (PHE) contaminated soil. The effects of environmental factors on the mobilization of PHE in soil by CNC nanofluid was investigated using factorial analysis. The results showed that temperature and ionic strength had a significant influence on PHE removal, which were associated with the viscosity and zeta potential change in the nanofluid. The analysis based on two-dimensional correlation spectroscopy integrated with FTIR and synchrotron-based XRF imaging revealed that metals and minerals in soil played important roles in PHE detachment. The hydroxyl groups on CNC bonded with Fe-O, Si-O, and Mn-O in soil as time went on, and eventually achieved PHE mobilization through the interruption of PHE/SOM-metal/mineral linkages. The complexation and transport of PHE/SOM-metals/minerals from soil particles to the aqueous phase could be the primary PHE removal mechanism. Besides, the biotoxicity study displayed a detoxification effect of CNC nanofluid on PHE contaminants in soil. This study offers new insight into a cost-effective and biodegradable nanocellulose washing agent, which can be a good alternative to the available site remediation options.