ABSTRACT
The understanding of O-O bond formation is of great importance for revealing the mechanism of water oxidation in photosynthesis and for developing efficient catalysts for water oxidation in artificial photosynthesis. The chemical oxidation of the RuII2(OH)(OH2) core with the vicinal OH and OH2 ligands was spectroscopically and theoretically investigated to provide a mechanistic insight into the O-O bond formation in the core. We demonstrate O-O bond formation at the low-valent RuIII2(OH) core with the vicinal OH ligands to form the RuII2(µ-OOH) core with a µ-OOH bridge. The O-O bond formation is induced by deprotonation of one of the OH ligands of RuIII2(OH)2 via intramolecular coupling of the OH and deprotonated O- ligands, conjugated with two-electron transfer from two RuIII centers to their ligands. The intersystem crossing between singlet and triple states of RuII2(µ-OOH) is easily switched by exchange of H+ between the µ-OOH bridge and the auxiliary backbone ligand.
ABSTRACT
Sensitization of a wide-gap oxide semiconductor with a visible-light-absorbing dye has been studied for decades as a means of producing H2 from water. However, efficient overall water splitting using a dye-sensitized oxide photocatalyst has remained an unmet challenge. Here we demonstrate visible-light-driven overall water splitting into H2 and O2 using HCa2Nb3O10 nanosheets sensitized by a Ru(II) tris-diimine type photosensitizer, in combination with a WO3-based water oxidation photocatalyst and a triiodide/iodide redox couple. With the use of Pt-intercalated HCa2Nb3O10 nanosheets further modified with amorphous Al2O3 clusters as the H2 evolution component, the dye-based turnover number and frequency for H2 evolution reached 4580 and 1960 h-1, respectively. The apparent quantum yield for overall water splitting using 420 nm light was 2.4%, by far the highest among dye-sensitized overall water splitting systems reported to date. The present work clearly shows that a carefully designed dye/oxide hybrid has great potential for photocatalytic H2 production, and represents a significant leap forward in the development of solar-driven water splitting systems.
ABSTRACT
[Ru(Rtpy)(bpy)(H2O)]2+ (1R; bpy = 2,2'-bipyridine, and Rtpy = 2,2':6',2â³-terpyridine derivatives) complexes with a variety of 4'-substituent groups on Rtpy were synthesized and characterized to reveal the effects of substituents on their structures, physicochemical properties, and catalytic activities for water oxidation. The geometric structures of 1R are not considerably influenced by the electron-donating ability of the 4'-substituent groups on Rtpy. Similar multistep proton-coupled electron transfer reactions were observed for 1R, and the redox potentials for each oxidation step tended to decrease with an increase in the electron-donating ability of the substituent, which is explained by the increased electron density on the Ru center by electron-donating groups, stabilizing the positive charge that builds up upon oxidation. This is consistent with the red-shift of the absorption bands around 480 nm assigned to the metal-to-ligand charge transfer transition for 1R due to the increased d orbital energy level of the Ru center. The turnover frequency (kO2) of 1R for water oxidation catalysis, however, depended greatly on the Rtpy ligands, varying from 0.05 × 10-2 to 44 × 10-2 s-1 (as the highest kO2 was observed for R = ethoxy) by a factor of 880. A critical electron-donating ability of the 4'-substituent groups with a narrow range of Hammett constants (σp = -0.27 to -0.24) found for the highest kO2 values is valuable for understanding the great difficulty in the search for efficient water oxidation catalysts. On another front, the kO2 values increased with a decrease in the redox potentials of RuIVâO/RuVâO for 1R, indicating that the potential of formation of RuVâO species for 1R is crucial for water oxidation catalysis under the employed conditions.
ABSTRACT
N2 -Intercalated crystalline mesoporous tungsten trioxide (WO3 ) was synthesized by a thermal decomposition technique with dodecylamine (DDA) as a surfactant template with a dual role as an N-atom source for N2 intercalation, alongside its conventional structure-directing role (by micelle formation) to induce a mesoporous structure. N2 physisorption analysis showed that the specific surface area (57.3â m2 g-1 ) of WO3 templated with DDA (WO3 -DDA) is 2.3 times higher than that of 24.5â m2 g-1 for WO3 prepared without DDA (WO3 -bulk), due to the mesoporous structure of WO3 -DDA. The Raman and X-ray photoelectron spectra of WO3 -DDA indicated intercalation of N2 into the WO3 lattice above 450 °C. The UV/Vis diffuse-reflectance spectra exhibited a significant shift of the absorption edge by 28â nm, from 459â nm (2.70â eV) to 487â nm (2.54â eV), due to N2 intercalation. This could be explained by the bandgap narrowing of WO3 -DDA by formation of a new intermediate N 2p orbital between the conduction and valance bands of WO3 . A WO3 -DDA-coated indium tin oxide (ITO) electrode calcined at 450 °C generated a photoanodic current under visible-light irradiation below 490â nm due to photoelectrochemical water oxidation, as opposed to below 470â nm for ITO/WO3 -bulk. The incident photon-to-current conversion efficiency (IPCE=24.5 %) at 420â nm and 0.5â V versus Ag/AgCl was higher than that of 2.5 % for ITO/WO3 -bulk by one order of magnitude due to N2 intercalation and the mesoporous structure of WO3 -DDA.
ABSTRACT
A novel type of energy donor-acceptor system on a clay surface has been prepared. The energy transfer between an energy-donating cationic pyrene derivative (An-Py2+) and an energy-accepting tris(bipyridine)ruthenium complex (Ru2+) on the clay surface was investigated using absorption, emission, and lifetime measurements. An obvious energy transfer was observed, and one Ru2+ molecule quenched the emission from five molecules of An-Py2+ with an emission quenching efficiency of 85% on the clay surface. This suggests that the light energies absorbed by five of the An-Py2+ molecules were accumulated in the one Ru2+ molecule. Near-quantitative emission quenching was observed for stoichiometric amounts of An-Py2+ and Ru2+. The apparent quenching rate constant is approximately 1017 L mol-1 s-1, and thus the quenching rate constant is 107-108 times higher than the diffusion rate constant in a homogeneous solution.
ABSTRACT
proximal,proximal-(p,p)-[RuII2(tpy)2LXY]n+ (tpy = 2,2';6',2â³-terpyridine, L = 5-phenyl-2,8-di-2-pyridyl-1,9,10-anthyridine, and X and Y = other coordination sites) yields the structurally and functionally unusual RuII(µ-OH)RuII core, which is capable of catalyzing water oxidation with key water insertion to the core (Inorg. Chem. 2015, 54, 7627). Herein, we studied a sequence of bridging-ligand substitution among p,p-[Ru2(tpy)2L(µ-Cl)]3+ (Ru2(µ-Cl)), p,p-[Ru2(tpy)2L(µ-OH)]3+ (Ru2(µ-OH)), p,p-[Ru2(tpy)2L(OH)(OH2)]3+ (Ru2(OH)(OH2)), and p,p-[Ru2(tpy)2L(OH)2]2+ (Ru2(OH)2) in aqueous solution. Ru2(µ-Cl) converted slowly (10-4 s-1) to Ru2(µ-OH), and further Ru2(µ-OH) converted very slowly (10-6 s-1) to Ru2(OH)(OH2) by the insertion of water to reach equilibrium at pH 8.5-12.3. On the basis of density functional theory (DFT) calculations, Ru2(OH)(OH2) was predicted to be thermodynamically stable by 13.3 kJ mol-1 in water compared to Ru2(µ-OH) because of the specially stabilized core structure by multiple hydrogen-bonding interactions involving aquo, hydroxo, and L backbone ligands. The observed rate from Ru2(µ-OH) to Ru2(OH)2 by the insertion of an OH- ion increased linearly with an increase in the OH- concentration from 10 to 100 mM. The water insertion to the core is very slow (â¼10-6 s-1) in aqueous solution at pH 8.5-12.3, whereas the insertion of OH- ions is accelerated (10-5-10-4 s-1) above pH 13.4 by 2 orders of magnitude. The kinetic data including activation parameters suggest that the associative mechanism for the insertion of water to the RuII(µ-OH)RuII core of Ru2(µ-OH) at pH 8.5-12.3 alters the interchange mechanism for the insertion of an OH- ion to the core above pH 13.4 because of relatively stronger nucleophilic attack of OH- ions. The hypothesized p,p-[Ru2(tpy)2L(µ-OH2)]4+ and p,p-[Ru2(tpy)2L(OH2)2]4+ formed by protonation from Ru2(µ-OH) and Ru2(OH)(OH2) were predicted to be unstable by 71.3 and 112.4 kJ mol-1 compared to Ru2(µ-OH) and Ru2(OH)(OH2), respectively. The reverse reactions of Ru2(µ-OH), Ru2(OH)(OH2), and Ru2(OH)2 to Ru2(µ-Cl) below pH 5 could be caused by lowering the core charge by protonation of the µ-OH- or OH- ligand.
ABSTRACT
Tetra-cationic pyrene derivative (Py(4+)) and tris(bipyridine)ruthenium(II) (Ru(2+)) were hybridized onto the surface of a synthesized clay. We observed the remarkable stimulation of excited Py(4+) emission quenching on the clay surface, with a very large apparent quenching rate constant (kq = 7.4 ± 0.7 × 10(15) L mol(-1) s(-1)).
ABSTRACT
Nanowire of nickel molybdate hydrate, being recognized as an emerging supercapacitor material, was synthesized from the intercrystal self-assembly process (commonly referred to as oriented aggregation or attachment). The detailed lattice image of a NiMoO4·0.75H2O nanowire and the intermediate nanostructure before reaching the interplanar binding were successfully captured by means of high-resolution transmission and scanning electron microscopies. NiMoO4·0.75H2O possessed highly crystalline surface and internal nanostructures.
ABSTRACT
The current approaches to electrochemically synthesizing valve metal-derived nanochannel films with longitudinal nanospaces aligned at a right angle to planar substrates rely on highly toxic fluoride compounds and require severe reaction conditions. Herein, we report on a fluoride-free, room-temperature electrochemical synthesis of a genuine mesoporous niobia thin film from the parent metal. The electrochemical reaction is driven by only a 1 V bias with respect to a Pt counter electrode in an aqueous solution. The solution contained an inexpensive, less toxic potassium hydroxide, and the reaction produced favorable byproducts, namely, recyclable K8Nb6O19 and H2.
ABSTRACT
A new series of proximal,proximal-[Ru2(tpy)2(L)XY](n+) (p,p-Ru2XY, tpy = 2,2':6',2â³-terpyridine, L = 5-phenyl-2,8-di(2-pyridyl)-1,9,10-anthyridine, X and Y = other coordination sites) were synthesized using photoisomerization of a mononuclear complex. The p,p-Ru2XY complexes undergo unusual reversible bridge-exchange reactions to generate p,p-Ru2(µ-Cl), p,p-Ru2(µ-OH), and p,p-Ru2(OH)(OH2) with µ-Cl, µ-OH, as well as hydroxo and aquo ligands at X and Y sites of p,p-Ru2XY, respectively. The geometric and electronic structures of these complexes were characterized based on UV-vis and (1)H NMR spectra, X-ray crystallography, and density functional theory (DFT) calculations. (1)H NMR data showed C2 symmetry of p,p-Ru2(OH)(OH2) with the distorted L chelate and nonequivalence of two tpy ligands, in contrast to the C2v symmetry of p,p-Ru2(µ-Cl) and p,p-Ru2(µ-OH). However, irrespective of the lower symmetry, p,p-Ru2(OH)(OH2) is predominantly formed in neutral and weakly basic conditions due to the specially stabilized core structure by multiple hydrogen-bond interactions among aquo, hydroxo, and backbone L ligands. The electrochemical data suggested that p,p-Ru2(OH)(OH2) (Ru(II)-OH:Ru(II)-OH2) is oxidized to the Ru(III)-OH:Ru(III)-OH state at 0.64 V vs saturated calomel electrode (SCE) and further to Ru(IV)âO:Ru(IV)-OH at 0.79 V by successive 1-proton-coupled 2-electron processes at pH 7.0. The cyclic voltammogram data exhibited that the p,p-Ru2(OH)(OH2) complex works more efficiently for electrocatalytic water oxidation, compared with a similar mononuclear complex distal-[Ru(tpy)(L)OH2](2+) (d-RuOH2) and p,p-Ru2(µ-Cl) and p,p-Ru2(µ-OH), showing that the p,p-Ru2 core structure with aquo and hydroxo ligands is important for efficient electrocatalytic water oxidation. Bulk electrolysis of the p,p-Ru2(OH)(OH2) solution corroborated the electrocatalytic cycle involving the Ru(III)-OH:Ru(III)-OH state species as a resting state. The mechanistic insight into O-O bond formation for O2 production was provided by the isotope effect on electrocatalytic water oxidation by p,p-Ru2(OH)(OH2) and d-RuOH2 in H2O and D2O media.
ABSTRACT
Eight novel polyfluorinated surfactants (C(n)F(2n+1)CONH(CH2)2 N(+)(CH3)2C16H33 Br(-); abbreviated as CnF-S, where n = 1, 2, 3, 4, 5, 6, 8, 10) were synthesized and their intercalation into cation-exchangeable clay was investigated. All of the polyfluorinated surfactants intercalated in amounts exceeding the cation exchange capacity (CEC) of the clay. The C4F-S and C5F-S surfactants exhibited intercalation up to 480% of the CEC as a saturated adsorption limit. On the basis of X-ray analysis, CnF-S surfactants intercalated between clay nanosheets to form a bilayer structure in which the surfactant molecules tilt at an angle of â¼60° with respect to the clay surface. The saturated adsorption limits and layer distances differed between surfactants with short (n = 1, 2) and long (n = 3-10) perfluoroalkyl chains. For long-chain surfactants, their saturated adsorption limits were independent of the perfluoroalkyl chain length and the layer distances systematically increased with increasing perfluoroalkyl chain length. These results suggest that the microscopic orientation differed between the short and long chains. X-ray analysis showed that the long-chain surfactants orient the perfluoroalkyl chains at a tilt of 41 ± 5° with respect to the clay layer. This value was in good agreement with polarized IR measurements of 42 ± 2° for this angle.
ABSTRACT
We report a template-free facile technique that allows for the first ever synthesis of a monoclinic Ag2Mo2O7 nanowire (m-Ag2Mo2O7-NW), using a commercially available MoO3 particle. The nanowire possessed high crystallinity and structural homogeneity and strongly suggested that the nanowire was grown through an oriented aggregation mechanism in contrast to the case of a typical solution-phase method. The corresponding bulky counterpart showed no photoresponse; however, a complete structural transformation toward a nanowire triggered activity for O2 evolution in the presence of Ag(+) as an electron acceptor under visible-light irradiation.
ABSTRACT
A triplet-triplet annihilation-based photon upconversion (TTA-UC) system with a low threshold excitation intensity (Ith) in plain water was developed. Water-soluble anionic porphyrin (PdTPPS4-) and diphenylanthracene (DCDPA2-) derivatives were used as light absorbers and emitter molecules, respectively, and no additives such as surfactants were required. The phosphorescence emission from PdTPPS4- under an excitation wavelength of 528 nm was quenched by DCDPA2-, resulting in triplet energy transfer, whereas fluorescence from DCDPA2- was observed in a short wavelength region (400-500 nm). Three independent emission studies utilizing different excitation light sources validated the TTA-UC process in a simple aqueous solution. TTA occurred after the triplet energy transfer, according to the time profiles of phosphorescence and fluorescence detected following pulse laser excitation. The Ith for TTA-UC was estimated to be lower than 6 mW cm-2, although it could not be exactly determined due to the sensitivity limit of the experimental setup. The upper limit of Ith for the aqueous solution of DCDPA2- and PdTPPS4- is the smallest value obtained to date for aqueous systems and comparable to that of high-performance TTA-UC systems in organic solutions.
Subject(s)
Porphyrins , Water , Photons , Light , Surface-Active AgentsABSTRACT
We are facing three serious problems related to fossil resources, i.e., shortage of energy, shortage of carbon resources, and the global worming problem. Development of practical systems for converting CO2 to useful chemicals using solar light, i.e., photocatalytic CO2 reduction systems, should be one of the best solutions for these problems. In this article, we review photocatalytic CO2 reduction systems, which are classified in two categories: (1) homogeneous reaction systems mainly using transition metal complexes, and (2) heterogeneous systems mainly using inorganic semiconductor as a light absorber.
Subject(s)
Carbon Dioxide/chemistry , Semiconductors , Catalysis , PhotochemistryABSTRACT
A novel type of light-harvesting complexes was synthesized with a linear-shaped Re(I) oligomer as a photon absorber and a Ru(II) polypyridyl complex as an energy acceptor. The Re(I) oligomer and the Ru(II) complex are connected to each other with a bisdiimine ligand, that is, 1,2-bis[4-(4'-methyl-2,2'-bipyridinyl)]ethane (C2dmb). These Ru(II)-Re(I) multinuclear complexes, [Ru(dmb)(2)(C2dmb)Re(CO)(2){-PP-Re(dmb)(CO)(2)-PP-Re(dmb)(CO)(3)}(2)](PF(6))(7), [Ru(dmb)(2)(C2dmb)Re(CO)(2){-PP-Re(dmb)(CO)(3)}(2)](PF(6))(5), and [Ru(dmb)(2)(C2dmb)Re(CO)(3)-PP-Re(dmb)(CO)(2)-PP-Re(dmb)(CO)(3)](PF(6))(5) (dmb = 4,4'-dimethyl-2,2'-bipyridine; PP = bis(diphenylphosphino)acetylene), can strongly absorb a wide range of UV-vis light and emit mostly from the (3)MLCT excited state of the Ru(II) unit at room temperature in solution even when the Re chain absorbs the light. Comparison of their photophysical properties with those of the corresponding model complexes shows that a highly efficient energy transfer from the Re chain to the Ru(II) unit occurs, and the energy transfer rate constants from each Re(I) unit were determined.
Subject(s)
Light-Harvesting Protein Complexes/chemistry , Organometallic Compounds/chemistry , Rhenium/chemistry , Ruthenium/chemistry , Light-Harvesting Protein Complexes/chemical synthesisABSTRACT
A new mononuclear Ru aquo complex [Ru(C8Otpy)(H2dcbpy)(OH2)]2+ with 4,4'-dicarboxy-2,2'-bipyridine (H2dcbpy) and 4'-octyloxy-2,2':6',2''-terpyridine (C8Otpy) ligands was synthesized to investigate electrocatalytic water oxidation by the complex immobilized on a mesoporous indium-doped tin oxide (meso-ITO) electrode using a multi-potential-step chronocoulospectrometric (MPSCCS) technique. UV-visible absorption spectroscopic data indicated that [Ru(C8Otpy)(dcbpy)(OH2)] (RuOH2) is deprotonated to [Ru(C8Otpy)(dcbpy)(OH)]- (RuOH) on the meso-ITO surface even at pH 5.9 of the electrolyte solution. The cyclic voltammogram (CV) of the RuOH/meso-ITO electrode showed a pH-independent redox response at E1/2 = 0.80 V vs. Ag/AgCl in the pH range of 5-12, being assigned to a non-proton-coupled 1e- redox process of RuIIOH/RuIIIOH. The MPSCCS measurement of the RuOH/meso-ITO electrode between 0.2 and 1.5 V vs. Ag/AgCl showed that RuIV species (tentatively RuIVO) exist in a steady state of the electrocatalysis in the initial stage. This suggests that the electrochemical oxidation from RuIVO to RuVO could compete with the water nucleophilic attack for O-O bond formation involved in the rate-determining step under the employed conditions. The possibility that the water nucleophilic attack on RuIVO could also compete with the electrochemical oxidation of RuIVO to RuVO was suggested by the electrocatalytic water oxidation at a low applied potential of 1.4 V prior to the formation potential of RuVO. The MPSCCS measurement at 1.4 V for 1 h showed that RuOH is gradually transformed into an alternative catalyst (most likely RuOx nanoparticles) on the electrode. The MPSCCS technique is promising to reveal the redox reactions and catalytic aspects of molecular catalysts immobilized on an electrode for water oxidation.
ABSTRACT
Photo-induced redox reactions in a hybrid film of a cationic porphyrin dye (H2TMPyP) accommodated within a transparent mesoporous silica (MPS) film spin-coated on an FTO electrode have been investigated for such applications as the construction of efficient solar energy storage devices and novel light-stimulated sensors. In this system, anodic and cathodic photocurrents were observed under bias voltages of +0.3 V and -0.4 V, respectively. The action spectrum of the photocurrents corresponded well with the absorbance of the H2TMPyP molecules in the visible light region. Control experiments showed no photocurrents for the mesoporous silica without H2TMPyP. Our investigations showed that the H2TMPyP molecules function not only as a sensitizer but also as a mediator for electron migrations within mesoporous nano-cavities.
ABSTRACT
With a view to developing a photoanode for visible light-driven water oxidation in solar water splitting cells, pure-monoclinic WO3 nanorod crystals with N2 intercalated into the lattice were synthesized by using hydrazine with a dual functional role-as an N atom source for the inâ situ N2 intercalation and as a structure-directing agent for the nanorod architecture-to gain higher incident photon-to-current conversion efficiency at 420â nm than with most previously reported WO3 electrodes.
ABSTRACT
The synthesis of silver nanoparticles (AgNPs) within the interlayer space of transparent layered titania nanosheet (TNS) films is investigated. A considerable number of silver ions (≈70% against the cation exchange capacity of the TNS) are intercalated in the TNS films using methyl-viologen-containing TNSs as a precursor. The silver ion (Ag+)-containing TNS films are treated with aqueous sodium tetrahydroborate (NaBH4), resulting in a gradual color change to bright blue. Various structural analyses clearly show that crystalline AgNPs are generated within the interlayer space of the TNSs. The NaBH4-treated films show intense and characteristic near-infrared (NIR) extinction spectra up to 1800 nm. The stability of the AgNPs within the TNS against oxygen and moisture is also investigated, and 96% and 82% of the AgNPs remain after standing in air for 1 month and 1 year, respectively. The NIR extinctions of the AgNP-containing TNS films are further extended by employing different preparation procedures, for example, using sintered TNS films as starting materials and irradiating the Ag+-containing TNSs with ultraviolet (UV) light. The obtained AgNP-containing TNS films exhibit photochemical activities in the production of hydrogen from ammonia borane under visible-light irradiation and the decomposition of nitrogen monoxide under UV-light irradiation.