ABSTRACT
In water purification, the performance of heterogeneous advanced oxidation processes significantly relies upon the utilization of the catalyst's specific surface area (SSA). However, the presence of the structural "dead volume" and pore-size-induced diffusion-reaction trade-off limitation restricts the functioning of the SSA. Here, we reported an effective approach to make the best SSA by changing the traditional 3D spherule catalyst into a 2D-like form and creating an in situ micro-nanolinked structure. Thus, a 2D-like catalyst was obtained which was characterized by a mini "paddy field" surface, and it exhibited a sharply decreased dead volume, a highly available SSA and oriented flexibility. Given its paddy-field-like mass-transfer routine, the organic capture capability was 7.5-fold higher than that of the catalyst with mesopores only. Moreover, such a catalyst exhibited a record-high O3-to-·OH transition rate of 2.86 × 10-8 compared with reported millimetric catalysts (metal base), which contributed to a 6.12-fold higher total organic removal per catalyst mass than traditional 3D catalysts. The facile scale preparation, performance stability, and significant material savings with the 2D-like catalyst were also beneficial for practical applications. Our findings provide a unique and general approach for designing potential catalysts with excellent performance in water purification.
Subject(s)
Ozone , Water Pollutants, Chemical , Water Purification , Oxidation-Reduction , Metals , Catalysis , Water Pollutants, Chemical/analysisABSTRACT
BACKGROUND: Axillary hyperhidrosis and bromhidrosis are common clinical diseases, affecting the patients' work and life. Negative-pressure suction-curettage is the most popular treatment now, but challenged by a new microwave-based therapy (MiraDry). We intend to compare the safety and efficiency of the 2 treatments. METHODS: A retrospective analysis of 39 female patients with both primary hyperhidrosis and bromhidrosis was conducted. Seventeen patients were treated with MiraDry, and 22 underwent negative-pressure suction-curettage. The postoperative follow-up program included sweat and odor assessments, satisfaction measurement, safety evaluation, and recurrence assessment at different time points until 12 months. RESULTS: Both treatments showed a significant reduction (P < 0.05) in HDSS score and odor level at 6 and 12 months compared with the baseline. No significant difference in relative reduction was observed between the 2 groups. The satisfaction score of the microwave-based therapy group was higher than that of the negative-pressure suction-curettage group, but no statistical difference was found. The difference in the recurrence rate and complication rate between the groups did not reach significance. CONCLUSIONS: Microwave-based therapy is a noninvasive treatment with durable effects, low risks, shorter downtime, good appearance, and high satisfaction for axillary hyperhidrosis and bromhidrosis.
Subject(s)
Axilla , Hyperhidrosis , Microwaves , Vacuum Curettage , Humans , Hyperhidrosis/surgery , Hyperhidrosis/therapy , Female , Retrospective Studies , Microwaves/therapeutic use , Adult , Vacuum Curettage/methods , Treatment Outcome , Patient Satisfaction , Young Adult , Follow-Up Studies , Middle AgedABSTRACT
BACKGROUND: Postoperative infection of breast implants can lead to implant removal and other complications. This study aimed to investigate the presence of costal cartilage infection following breast implant surgery and the diagnostic role of PET/CT in identifying this rare complication. PATIENTS AND METHODS: A retrospective study included 16 patients with persistent infections after breast implant removal surgery. Patients underwent PET/CT scans before surgery, and surgical plans were made based on PET/CT findings. Surgical procedures were guided by PET/CT, and specimens were collected for pathological examination and microbiological culture. Follow-up assessments were performed at 1, 3, and 12 months postoperatively. RESULTS: Among the 16 patients, 11 were diagnosed with costal cartilage infection, whereas 5 had subcutaneous soft tissue infections. PET/CT accurately identified costal cartilage infection in all cases and localized the infected costal cartilage in the majority of cases. Microbiological culture results showed various pathogens. All patients were cured with one or staged surgery. CONCLUSION: Costal cartilage infection following breast implant surgery is a significant concern. PET/CT plays a crucial role in the accurate diagnosis and localization of infected costal cartilage, aiding in appropriate surgical management. Patients should be closely monitored for the possibility of costal cartilage infection when experiencing persistent symptoms after breast implant surgery.
Subject(s)
Breast Implantation , Breast Implants , Costal Cartilage , Positron Emission Tomography Computed Tomography , Humans , Female , Retrospective Studies , Middle Aged , Positron Emission Tomography Computed Tomography/methods , Adult , Breast Implants/adverse effects , Costal Cartilage/transplantation , Breast Implantation/adverse effects , Prosthesis-Related Infections/diagnosis , Prosthesis-Related Infections/diagnostic imaging , Prosthesis-Related Infections/etiology , Surgical Wound Infection/diagnosis , Surgical Wound Infection/etiology , Surgical Wound Infection/microbiology , Device Removal , AgedABSTRACT
Ultralong carbon nanotubes (CNTs) are in huge demand in many cutting-edge fields due to their macroscale lengths, perfect structures, and extraordinary properties, while their practical application is limited by the difficulties in their mass production. Herein, we report the synthesis of ultralong CNTs with a dramatically increased yield by a simple but efficient substrate interception and direction strategy (SIDS), which couples the advantages of floating-catalyst chemical vapor deposition with the flying-kite-like growth mechanism of ultralong CNTs. The SIDS-assisted approach prominently improves the catalyst utilization and significantly increases the yield. The areal density of the ultralong CNT arrays with length of over 1 cm reached a record-breaking value of â¼6700 CNTs mm-1, which is 2-3 orders of magnitude higher than the previously reported values obtained by traditional methods. The SIDS provides a solution for synthesizing high-quality ultralong CNTs with high yields, laying the foundation for their mass production.
ABSTRACT
Single-atom catalysts with high activity and efficient atom utilization have great potential in the electrocatalysis field, especially for rechargeable zinc-air batteries (ZABs). However, it is still a serious challenge to rationally construct a single-atom catalyst with satisfactory electrocatalytic activity and long-term stability. Here, we simultaneously realize the atomic-level dispersion of cobalt and the construction of carbon nanotube (CNT)-linked N-doped porous carbon nanofibers (NCFs) via an electrospinning strategy. In this hierarchical structure, the Co-N4 sites provide efficient oxygen reduction/evolution electrocatalytic activity, the porous architectures of NCFs guarantee the active site's accessibility, and the interior CNTs enhance the flexibility and mechanical strength of porous fibers. As a binder-free air cathode, the as-prepared catalysts deliver superdurability of 600 h at 10 mA cm-2 for aqueous ZABs and considerable flexibility and a small voltage gap for all-solid-state ZABs. This work provides an effective single-atom design/nanoengineering for superdurable zinc-air batteries.
ABSTRACT
Transition metal oxides (TMOs) are promising inorganic electrochromic materials (ECMs) that can be widely used in electronic displays and adaptive camouflage. However, there are still huge challenges for TMOs to simultaneously achieve multicolor transformation capability and good cycling stability. Herein, we assemble Au-modified (0.01 wt %) VxO2x+1 (x > 2) nanoflowers (Au@VxO2x+1 NFs) composed of two-dimensional porous nanosheets containing two valences states of vanadium (V4+ and V5+). The Au@VxO2x+1 NFs exhibits outstanding electrochromic performance with five reversible color transformations (orange, yellow, green, gray, and blue) at a voltage less than 1.5 V and excellent cycling stability (2000 cycles without significant decay). To the best of our knowledge, this is the first time that a single vanadium oxide ECM, rather than a device, realizes five color changes. This work provides a feasible way for the efficient preparation of multicolor electrochromic TMOs. The newly developed Au@VxO2x+1 NFs demonstrate the potential application in adaptive camouflage.
ABSTRACT
The development of high-efficiency and durable bifunctional electrocatalysts for both the oxygen reduction reaction (ORR) and oxygen evolution reaction (OER) is critical for the widespread application of rechargeable zinc-air (Zn-air) batteries. This calls for rational screening of targeted ORR/OER components and precise control of their atomic and electronic structures to produce synergistic effects. Here, we report a Mn-doped RuO2 (Mn-RuO2) bimetallic oxide with atomic-scale dispersion of Mn atoms into the RuO2 lattice, which exhibits remarkable activity and super durability for both the ORR and OER, with a very low potential difference (ΔE) of 0.64 V between the half-wave potential of ORR (E1/2) and the OER potential at 10 mA cm-2 (Ej10) and a negligible decay of E1/2 and Ej10 after 250â¯000 and 30â¯000 CV cycles for ORR and OER, respectively. Moreover, Zn-air batteries using the Mn-RuO2 catalysts exhibit a high power density of 181 mW cm-2, low charge/discharge voltage gaps of 0.69/0.96/1.38 V, and ultralong lifespans of 15â¯000/2800/1800 cycles (corresponding to 2500/467/300 h operation time) at a current density of 10/50/100 mA cm-2, respectively. Theoretical calculations reveal that the excellent performances of Mn-RuO2 is mainly due to the precise optimization of valence state and d-band center for appropriate adsorption energy of the oxygenated intermediates.
ABSTRACT
Historic climate changes drive geographical populations of coastal plants to contract and recover dynamically, even die out completely. Species suffering from such bottlenecks usually lose intraspecific genetic diversity, but how do these events influence population subdivision patterns of coastal plants? Here, we investigated this question in the typical coastal plant: mangrove species Aegiceras corniculatum. Inhabiting the intertidal zone of the tropical and subtropical coast of the Indo-West Pacific oceans, its populations are deemed to be greatly shaped by historic sea-level fluctuations. Using dual methods of Sanger and Illumina sequencing, we found that the 18 sampled populations were structured into two groups, namely, the "Indo-Malayan" group, comprising three subgroups (the northern South China Sea, Gulf of Bengal, and Bali), and the "Pan-Australasia" group, comprising the subgroups of the southern South China Sea and Australasia. Based on the approximate Bayesian computations and Stairway Plot, we inferred that the southern South China Sea subgroup, which penetrates the interior of the "Indo-Malayan" group, originated from the Australasia subgroup, accompanied by a severe bottleneck event, with a spot of gene flow from both the Australasia and "Indo-Malayan" groups. Geographical barriers such as the Sundaland underlie the genetic break between Indian and Pacific Oceans, but the discontinuity between southern and northern South China Sea was originated from genetic drift in the bottleneck event. Hence, we revealed a case evidencing that the bottleneck event promoted population subdivision. This conclusion may be applicable in other taxa beyond coastal plants.
Subject(s)
Gene Flow , Primulaceae , Bayes Theorem , Biological Evolution , Pacific Ocean , Phylogeny , Primulaceae/geneticsABSTRACT
Designing high-performance trifunctional electrocatalysts for ORR/OER/HER with outstanding activity and stability for each reaction is quite significant yet challenging for renewable energy technologies. Herein, a highly efficient and durable trifunctional electrocatalyst RuCoOx is prepared by a unique one-pot glucose-blowing approach. Remarkably, RuCoOx catalyst exhibits a small potential difference (ΔE) of 0.65 V and low HER overpotential of 37 mV (10 mA cm-2), as well as a negligible decay of overpotential after 200â¯000/10â¯000/10â¯000 CV cycles for ORR/OER/HER, all of which show overwhelming superiorities among the advanced trifunctional electrocatalysts. When used in liquid rechargeable Zn-air batteries and water splitting electrolyzer, RuCoOx exhibits high efficiency and outstanding durability even at quite large current density. Such excellent performance can be attributed to the rational combination of targeted ORR/OER/HER active sites into one electrocatalyst based on the double-phase coupling strategy, which induces sufficient electronic structure modulation and synergistic effect for enhanced trifunctional properties.
ABSTRACT
Building a stable solid electrolyte interphase (SEI) is an effective method to enhance the performance of Si-based materials. However, the general strategy ignores the severe side reaction that originates from the penetration of the fluoride anion which influences the stability of the SEI. In this work, an analytical method is established to study the chemical reaction mechanism between the silicon and electrolyte by combining X-ray diffraction (XRD) with mass spectrometry (MS) technology. Additionally, a selective blocking layer coupling selectivity for the fluoride anion and a high conductivity is coated on the surface of silicon. With the protection of the selective blocking layer, the rate of the side reaction is decreased by 1700 times, and the corresponding SEI thickness is dwindled by 4 times. This work explores the mechanism of the intrinsic chemical reaction and provides future directions for improving Si-based anodes.
ABSTRACT
Scalable production and controlled doping of large-area two-dimensional transition-metal dichalcogenide films are fundamental steps toward their applications in electronic devices. Although a variety of methods for preparation of wafer-scale transition-metal dichalcogenide films have been developed, it is still challenging to realize homogeneous doping of the large-area films to modulate their electronic properties. In this paper, we report a new chemical vapor deposition (CVD) method for preparation of wafer-scale pristine and doped monolayer MoS2 films on 2-inch sapphire wafers. The molybdenum precursors are supplied in a "face-to-face" manner from a silica gel plate to the sapphire wafer, which guarantees uniform nucleation and growth of monolayer MoS2. This method can be used to prepare substitutionally doped monolayer MoS2 films. By using ReCl3 as the dopant precursor, we have obtained continuous Re-doped monolayer MoS2 films on sapphire wafers. Elemental analysis confirms successful Re-doping of the MoS2 film. Spherical aberration-corrected scanning transmission electron microscopy characterization reveals that the Re atoms are incorporated at the substitutional Mo sites in the MoS2 lattice. The incorporation of Re atoms leads to n-type doping of MoS2 as evidenced by Kelvin probe force microscope studies. Electrical measurements reveal that the transport properties of the Re-doped monolayer MoS2 is dramatically enhanced as compared with the pristine MoS2. The CVD method developed in this study can be applied to the production of a variety of two-dimensional transition-metal dichalcogenide films suitable for applications in electronic devices.
ABSTRACT
Polysulfide binding and trapping to prevent dissolution into the electrolyte by a variety of materials has been well studied in Li-S batteries. Here we discover that some of those materials can play an important role as an activation catalyst to facilitate oxidation of the discharge product, Li2S, back to the charge product, sulfur. Combining theoretical calculations and experimental design, we select a series of metal sulfides as a model system to identify the key parameters in determining the energy barrier for Li2S oxidation and polysulfide adsorption. We demonstrate that the Li2S decomposition energy barrier is associated with the binding between isolated Li ions and the sulfur in sulfides; this is the main reason that sulfide materials can induce lower overpotential compared with commonly used carbon materials. Fundamental understanding of this reaction process is a crucial step toward rational design and screening of materials to achieve high reversible capacity and long cycle life in Li-S batteries.
ABSTRACT
Nanofibers have attracted extensive attention and been applied in various fields due to their high aspect ratio, high specific surface area, flexibility, structural abundance, etc. The electrospinning method is one of the most promising and effective ways to produce nanofibers. The electrospun nanofibers-based films and membranes have already been demonstrated to possess small pore sizes, larges specific surface area, and can be grafted with different functionalities to adapt to various purposes. The environmental applications of nanofibers are one of the essential application fields, and great achievements have been made in this field. To well summarize the development of nanofibers and their environmental applications, we review the nanofiber fabrication methods, advanced fiber structures, and their applications in the field of air filtration, heavy metal removal, and self-cleaning surface. We hope this review and summary can provide readers a comprehensive understanding of the structural design and environmental applications of electrospun nanofibers.
ABSTRACT
Developing a practical silicon-based (Si-based) anode is a precondition for high-performance lithium-ion batteries. However, the chemical reactivity of the Si renders it liable to be consumed, which must be completely understood for it to be used in practical battery systems. Here, a fresh and fundamental mechanism is proposed for the rapid failure of Si-based materials. Silicon can chemically react with lithium hexafluorophosphate (LiPF6) to constantly generate lithium hexafluorosilicate (Li2SiF6) aggregates during cycling. In addition, nanocarbon coated on silicon acts as a catalyst to accelerate such detrimental reactions. By taking advantage of the high strength and toughness of silicon carbide (SiC), a SiC layer is introduced between the inner silicon and outer carbon layers to inhibit the formation of Li2SiF6. The side reaction rate decreases significantly due to the increase in the activation energy of the reaction. Si@SiC@C maintains a specific capacity of 980 mAh g-1 at a current density of 1 A g-1 after 800 cycles with an initial Coulombic efficiency over 88.5%. This study will contribute to improved design of Si-based anode for high-performance Li-ion batteries.
ABSTRACT
Aerosol-induced haze problem has become a serious environmental concern. Filtration is widely applied to remove aerosols from gas streams. Despite classical filtration theories, the nanoscale capture and evolution of aerosols is not yet clearly understood. Here we report an in situ investigation on the nanoscale capture and evolution of aerosols on polyimide nanofibers. We discovered different capture and evolution behaviors among three types of aerosols: wetting liquid droplets, nonwetting liquid droplets, and solid particles. The wetting droplets had small contact angles and could move, coalesce, and form axisymmetric conformations on polyimide nanofibers. In contrast, the nonwetting droplets had a large contact angle on polyimide nanofibers and formed nonaxisymmetric conformations. Different from the liquid droplets, the solid particles could not move along the nanofibers and formed dendritic structures. This study provides an important insight for obtaining a deep understanding of the nanoscale capture and evolution of aerosols and benefits future design and development of advanced filters.
ABSTRACT
Carbon nanotubes (CNTs) have drawn intensive research interest in the past 25 years due to their excellent properties and wide applications. Ultralong CNTs refers to the horizontally aligned CNT arrays which are usually grown on flat substrates, parallel with each other with large intertube distances. They usually have perfect structures, excellent properties, and lengths up to centimeters, even decimeters. Ultralong CNTs are promising candidates as building blocks for transparent displays, nanoelectronics, superstrong tethers, aeronautics and aerospace materials, etc. The controlled synthesis of ultralong CNTs with perfect structures is the key to fully exploit the extraordinary properties of CNTs. CNTs are typical one-dimensional single-crystal nanomaterials. It has always been a great challenge how to grow macroscale single-crystals with no defects. Thus, the synthesis of ultralong CNTs with no defect is of significant importance from both fundamental and industrial aspects. In this Account, we focus on our progress on the controlled synthesis of ultralong CNTs with perfect structures and excellent properties. A deep understanding of the CNT growth mechanism is the first step for the controlled synthesis of ultralong CNTs with high quality. We first introduce the growth mechanism for ultralong CNTs and the main factor affecting their structures. We then discuss the strategies to control the defects in the as-grown ultralong CNTs. With these approaches, ultralong high-quality CNTs with different structures can be obtained. By completely eliminating the factors which may induce defects in the CNT walls, ultralong CNTs with perfect structures can be obtained. Their chiral indices keep unchanged for several centimeters long along the axial direction of the CNTs. The defect-free structures render the ultralong CNTs with excellent electrical, mechanical and thermal properties. The as-grown ultralong CNTs exhibit superhigh mechanical strength (>100 GPa) and their breaking strain (>17.5%) reach the theoretical limits. They also show excellent electrical and thermal properties. In addition, centimeters long CNTs showed macroscale interwall superlubricious properties due to their defect-free structures. Ultralong, defect-free CNTs with controlled structures are highly desirable for many high-end applications. We hope that this Account will shed light on the controlled synthesis of ultralong CNTs with perfect structures and excellent properties. Moreover, the growth mechanism and controlled synthesis of ultralong CNTs with perfect structures also offers a good model for other one-dimensional nanomaterials.
ABSTRACT
Carbon nanotubes (CNTs) have attracted worldwide research interest in the past two decades owing to their extraordinary properties and wide applications in numerous fields. Among various types of CNTs, the horizontally aligned CNT (HACNT) arrays, which consist of CNTs grown on flat substrates and parallel with each other with large intertube distances and lengths up to centimeters, show many advantages due to their perfect structures and extraordinary mechanical, thermal and electrical properties. HACNTs show great potential as building blocks for transparent displays, nano electronics, quantum lines, field emission transistors, superstrong tethers, aeronautics and astronics materials, and even space elevators. During the past years, great progress has been achieved in HACNT research. In this review, we systematically review the growth mechanism, structure control, morphology control, characterization, manipulation, properties, and applications of HACNTs. Finally, we present a summary and outlook for the future development of HACNTs. We hope these advances will shed light on the future study of HACNTs.
ABSTRACT
Face masks are widely used to filter airborne pollutants, especially when particulate matter (PM) pollution has become a serious concern to public health. Here, the concept of thermal management is introduced into face masks for the first time to enhance the thermal comfort of the user. A system of nanofiber on nanoporous polyethylene (fiber/nanoPE) is developed where the nanofibers with strong PM adhesion ensure high PM capture efficiency (99.6% for PM2.5) with low pressure drop and the nanoPE substrate with high-infrared (IR) transparency (92.1%, weighted based on human body radiation) results in effective radiative cooling. We further demonstrate that by coating nanoPE with a layer of Ag, the fiber/Ag/nanoPE mask shows a high IR reflectance (87.0%) and can be used for warming purposes. These multifunctional face mask designs can be explored for both outdoor and indoor applications to protect people from PM pollutants and simultaneously achieve personal thermal comfort.
ABSTRACT
Particulate matter (PM) pollution in air has become a serious environmental issue calling for new type of filter technologies. Recently, we have demonstrated a highly efficient air filter by direct electrospinning of polymer fibers onto supporting mesh although its throughput is limited. Here, we demonstrate a high throughput method based on fast transfer of electrospun nanofiber film from roughed metal foil to a receiving mesh substrate. Compared with the direct electrospinning method, the transfer method is 10 times faster and has better filtration performance at the same transmittance, owing to the uniformity of transferred nanofiber film (>99.97% removal of PM2.5 at â¼73% of transmittance). With these advantages, large area freestanding nanofiber film and roll-to-roll production of air filter are demonstrated.
ABSTRACT
Here, we developed high-efficiency (>99.5%) polyimide-nanofiber air filters for the high temperature PM2.5 removal. The polyimide nanofibers exhibited high thermal stability, and the PM2.5 removal efficiency was kept unchanged when temperature ranged from 25-370 °C. These filters had high air flux with very low pressure drop. They could continuously work for >120 h for PM2.5 index >300. A field-test showed that they could effectively remove >99.5% PM particles from car exhaust at high temperature.