Your browser doesn't support javascript.
loading
Show: 20 | 50 | 100
Results 1 - 20 de 64
Filter
1.
Environ Sci Technol ; 2024 Oct 15.
Article in English | MEDLINE | ID: mdl-39404448

ABSTRACT

Infiltration and retention of microplastics in porous media are important for understanding their fate in environments and formulating treatment measures. Given porous media opacity, knowledge is usually obtained indirectly by monitoring microplastic concentration in the effluent and measuring microplastic distribution after removing grains in layers. In this study, real-time visualization of infiltration and retention of microplastics in porous media under vertical water flow is performed using an improved reflective index matching method, considering the different shapes and densities of microplastics and size ratios between microplastics and grains. The spherical microplastics have the largest infiltration depths, with trajectories closest to vertical and accompanied by long acceleration durations and low deceleration frequencies. The cylindrical microplastics deviate from vertical and have stronger transverse oscillations and more frequent decelerations, while the flaky microplastics have the most significant transverse displacements. The infiltration depth can be improved by reducing the size ratio between microplastics and grains and increasing the vertical flow rate, while the density of microplastics has a relatively limited effect. Sliding and rotating of microplastics after collision with grains are observed, responsible for deceleration and transverse displacements. Different retention patterns are found, with the number of types being inversely proportional to the number of principal dimensions of the shape.

2.
J Environ Manage ; 353: 120123, 2024 Feb 27.
Article in English | MEDLINE | ID: mdl-38306854

ABSTRACT

Ski-jump spillways are frequently used as discharge structures for high dams during floods with high energy heads. The selection of bucket types at the end of spillways has a pronounced effect on the hydraulics of jet characteristics, such as trajectories and entrained air features. However, there is no literature reporting how changes in the bucket types influence TDG generation. This study compares the hydraulic characteristics and TDG mass transfer properties of a hydraulic project under construction using both the traditional fully-flip bucket and the partial-flip bucket configurations. The results indicate that, the use of the partial-flip bucket at the end of the spillway significantly disperses the water flow and yields better energy dissipation effects. At low flow rates (lower than 400 m3/s for the dam in this study), there is little difference in the downstream TDG saturation between the traditional fully-flip bucket and the partial-flip bucket, the average difference is 1.6 % in three cases with a low flow rate. However, at high flow rates (higher than 400 m3/s), the partial-flip bucket generates more TDG compared to the traditional fully-flip bucket, reaching up to 6.2 % at the maximum flow rate. This phenomenon stems from significant changes in the hydrodynamics of the stilling basin at high flow rates due to variations in the flip bucket type. When strict control of TDG generation is necessary downstream of dams, the use of the partial-flip bucket should be carefully considered. This is because, at high flow rates, the partial-flip bucket might result in higher TDG saturation than the fully-flip bucket.


Subject(s)
Floods
3.
J Environ Manage ; 365: 121467, 2024 Aug.
Article in English | MEDLINE | ID: mdl-38908149

ABSTRACT

Understanding particle size distribution (PSD) of total suspended sediments in urban runoff is essential for pollutant fate and designing effective stormwater treatment measures. However, the PSDs from different land uses under different weather conditions have yet to be sufficiently studied. This research conducted a six-year water sampling program in 15 study sites to analyze the PSD of total suspended sediments in runoff. The results revealed that the median particle size decreased in the order: paved residential, commercial, gravel lane residential, mixed land use, industrial, and roads. Fine particles less than 125 µm are the dominant particles (over 75%) of total suspended sediments in runoff in Calgary, Alberta, Canada. Roads have the largest percentage of particles finer than 32 µm (49%). Gravel lane residential areas have finer particle sizes than paved residential areas. The results of PSD were compared with previous literature to provide more comprehensive information about PSD from different land uses. The impact of rainfall event types can vary depending on land use types. A long antecedent dry period tends to result in the accumulation of fine particles on urban surfaces. High rainfall intensity and long duration can wash off more coarse particles. The PSD in spring exhibits the finest particles, while fall has the largest percentage of coarse particles. Snowmelt particles are finer for the same land use than that during rainfall events because the rainfall-runoff flows are usually larger than the snowmelt flows.


Subject(s)
Particle Size , Rain , Seasons , Geologic Sediments/analysis , Geologic Sediments/chemistry , Water Movements , Environmental Monitoring , Alberta
4.
Water Sci Technol ; 89(8): 1928-1945, 2024 Apr.
Article in English | MEDLINE | ID: mdl-38678400

ABSTRACT

Rainfall-derived inflow/infiltration (RDII) modelling during heavy rainfall events is essential for sewer flow management. In this study, two machine learning algorithms, random forest (RF) and long short-term memory (LSTM), were developed for sewer flow prediction and RDII estimation based on field monitoring data. The study implemented feature engineering for extracting physically significant features in sewer flow modelling and investigated the importance of the relevant features. The results from two case studies indicated the superior capability of machine learning models in RDII estimation in the combined and separated sewer systems, and LSTM model outperformed the two models. Compared to traditional methods, machine learning models were capable of simulating the temporal variation in RDII processes and improved prediction accuracy for peak flows and RDII volumes in storm events.


Subject(s)
Machine Learning , Rain , Sewage , Models, Theoretical , Water Movements
5.
Water Sci Technol ; 89(3): 653-669, 2024 Feb.
Article in English | MEDLINE | ID: mdl-38358495

ABSTRACT

As an important component of the deep tunnel drainage system for dealing with urban waterlogging, the rotating stepped dropshaft has been proposed due to its small air entrainment. However, the hydraulic characteristics inside the shaft still need to be fully studied. In this study, the flow patterns, water velocity, and pressure in the rotating stepped dropshaft under different flow rates and geometric parameters were studied using a three-dimensional numerical model. The results show that increasing the central angle of the step and reducing the step height can both reduce the terminal velocity. A theoretical formula for predicting the terminal velocity was established and well validated. The connection between the shaft and the outlet pipe poses a severe threat to the structural safety due to alternating positive and negative pressures. Wall-attached swirling flow generates a circular high-pressure zone at the bottom of the dropshaft and the larger the flow rate, the greater the pressure gradient at the center of the bottom. By using the momentum theorem and considering the impact pressure range of the swirling flow, the shaft bottom pressure can be predicted reasonably well.


Subject(s)
Water , Motion
6.
Water Sci Technol ; 90(1): 344-362, 2024 Jul.
Article in English | MEDLINE | ID: mdl-39007323

ABSTRACT

Hydrodynamic separators are commonly used to control the total suspended solid concentration in stormwater before being discharged to natural water bodies. The separator studied in this paper, featuring a swirling flow generated by tangential inlet and outlet connections, was analyzed for its sediment removal efficiency in relation to sediment and flow rates. For the separator studied in this paper, the numerical model showed that the flow field was favorable for the sediments to gather at the center and settle. A higher flow rate or a smaller sediment diameter corresponded to a lower removal rate and vice versa. The dimension improvement for increasing the sediment removal rate was also studied. It was found that increasing the diameter of the separator showed a higher sediment removal rate compared with corresponding increase in the height of the separator. A dimensionless parameter J was proposed to assess the sediment removal rate of a separator, which may be used for designing and optimizing such a device. The removal rate is positively correlated with the J value. When the J value reaches 0.5 or above, the sediment removal rate exceeds 80%, which is a good initial target value for designing this type of separator.


Subject(s)
Geologic Sediments , Hydrodynamics , Models, Theoretical , Water Movements , Waste Disposal, Fluid/methods , Waste Disposal, Fluid/instrumentation
7.
J Environ Manage ; 334: 117524, 2023 May 15.
Article in English | MEDLINE | ID: mdl-36801692

ABSTRACT

The survival pattern of Escherichia coli O157:H7 (E. coli O157:H7) and its regulatory factors in natural environments have been widely studied. However, there is little information about the survival of E. coli O157:H7 in artificial environments, especially in wastewater treatment facilities. In this study, a contamination experiment was performed to explore the survival pattern of E. coli O157:H7 and its central control factors in two constructed wetlands (CWs) under different hydraulic loading rates (HLRs). The results showed that the survival time of E. coli O157:H7 was longer in the CW under the higher HLR. Substrate ammonium nitrogen and available phosphorus were the main factors that influenced the survival of E. coli O157:H7 in CWs. Despite the minimal effect of microbial α-diversity, some keystone taxa, such as Aeromonas, Selenomonas, and Paramecium, governed the survival of E. coli O157:H7. In addition, the prokaryotic community had a more significant impact on the survival of E. coli O157:H7 than the eukaryotic community. The biotic properties had a more substantial direct power on the survival of E. coli O157:H7 than the abiotic factors in CWs. Collectively, this study comprehensively disclosed the survival pattern of E. coli O157:H7 in CWs, which is an essential addition to the environmental behavior of E. coli O157:H7, providing a theoretical basis for the prevention and control of biological contamination in wastewater treatment processes.


Subject(s)
Escherichia coli O157 , Microbiota , Wetlands , Wastewater , Colony Count, Microbial
8.
Water Sci Technol ; 88(3): 542-555, 2023 Aug.
Article in English | MEDLINE | ID: mdl-37578873

ABSTRACT

Sediment accumulation in combined sewers can induce blockage and odor problems. Among various cleaning methods, using self-cleaning device-generated flushing waves has been thought to be an effective solution. In this study, a series of numerical tests were conducted using CFD software to investigate the cleaning efficiency of deposited sediment particles based on a simplified self-cleaning device. The CFD model was validated by the experimental and numerical results in the literature. The effects of several parameters including the flushing gate height, sediment bed thickness, sediment bed length, and sediment bed position on cleaning efficiency were discussed. A relative accumulative transport rate was defined to analyze the cleaning efficiency. Results showed that the lowest height of the flushing gate had the best effects on sediment removal. The flushing waves generated from the sudden opening of the flushing gate were capable of cleaning sediment deposits in the given initial sediment bed thickness, length, and position. The required time duration for cleaning the sediment deposit completely increased about 6, 3, and 3 times when the sediment bed thickness, sediment bed length, and distance between the flushing gate and sediment bed increased 10, 4, and 7 times, respectively.


Subject(s)
Sewage , Water Movements , Geologic Sediments
9.
Water Sci Technol ; 88(11): 2940-2954, 2023 Dec.
Article in English | MEDLINE | ID: mdl-38096080

ABSTRACT

A 16-month monitoring program was conducted on a prototype sanitary system in a coastal city in China. The groundwater infiltration (GWI) on dry weather days and the rain-derived inflow and infiltration (RDII) on wet weather days were quantified and analyzed. The proportion of monthly averaged GWI to total flow can be as high as 70% during the observation period mainly due to the high groundwater level. The results also show that the ratio of RDII volume to total rainfall volume (defined as R-value) reaches a limited value of approximately 10% for the studied system when the total rainfall depth increases. A reference indicator Rlim for the limited R-value was proposed for assessing the conditions of sewer systems in terms of RDII. The Rlim value depends on local sewer conditions and in general, a lower Rlim value represents a better performance on RDII and vice versa. This study enriches the case studies on the performance of a specific sanitary sewer system on inflow and infiltration in a typical coastal city with exceptionally high groundwater levels, excess rainfall events in the monitoring season and possible typhoon events, which addresses the unique locational and hydrological properties of a representative coastal city.


Subject(s)
Rain , Weather , Cities , Seasons , China , Sewage
10.
Water Sci Technol ; 88(12): 3168-3180, 2023 Dec.
Article in English | MEDLINE | ID: mdl-38154802

ABSTRACT

This study investigated the hydraulic characteristics of stormwater sumps and their design optimization for sediment retention using physical experiments. Particle image velocimetry was utilized to measure the flow field, and the use of internal structures was investigated for improving solids retention. Results indicate that these internal structures can significantly improve the sediment removal efficiency of suspended solids with an average size of 125 µm, resulting in an efficiency improvement of 20-30%. Additionally, a modified Péclet number was proposed to more accurately evaluate the sediment removal efficiency of stormwater sumps, and recommendations were provided for further improving and optimizing sump design. This study provides insights into the hydraulic characteristics of stormwater sumps and has important implications for optimizing and designing particle removal systems for various industrial and environmental applications.


Subject(s)
Geologic Sediments , Rain , Geologic Sediments/chemistry
11.
J Environ Manage ; 303: 114147, 2022 Feb 01.
Article in English | MEDLINE | ID: mdl-34861498

ABSTRACT

Urban stormwater models such as PCSWMM are important tools for evaluating urban stormwater quantity and quality. However, due to the lack of consideration of land covers, traditional catchment delineation methods have defects in model precision, parameter transferability and assessment of contribution from individual land cover types. This paper used PCSWMM model as a foundation, built a new land-cover based (LCB) model and made a systematic comparison with the traditional watershed delineation tool (WDT) model to study the impacts of land cover on the simulation of stormwater runoff and pollutant loading. The models were applied to two urban catchments in Calgary, Canada. The results revealed that the LCB model performed better than the WDT model in hydrological simulation, and land cover consideration can considerably improve model accuracy. The two models showed comparable performances in simulation of total suspended solids (TSS), total nitrogen (TN), and total phosphorus (TP) loading. The LCB model parameters could be regionalized based on land cover types. The hydrologic-hydraulic parameters can be satisfactorily transferred from neighboring gauged catchments to similar ungauged catchments. The transferring of water quality parameters did not perform as satisfactory. The LCB model could quantitively evaluate the contribution to runoff and pollutant loads of different land covers. Roads and roofs were found to be the major contributors to urban runoff and pollutants in the two urban catchments. Green space became important only during large storms events and its contribution could be ignored during dryer years.


Subject(s)
Environmental Pollutants , Water Pollutants, Chemical , Environmental Monitoring , Hydrology , Phosphorus/analysis , Rain , Water Movements , Water Pollutants, Chemical/analysis , Water Quality
12.
J Environ Manage ; 322: 115988, 2022 Nov 15.
Article in English | MEDLINE | ID: mdl-36058073

ABSTRACT

Stratification is one of the fundamental physical processes that may have a significant impact on water quality in stormwater wet ponds. However, the role of thermal and chemical stratifications in governing water quality processes is not fully understood. This is in part due to the lack of detailed field measurements of sufficient governing parameters over time periods that span a wide range of environmental conditions. To fill this gap, a comprehensive 2-year field program was undertaken in two stormwater wet ponds in Calgary, Alberta, Canada, during the ice-free season from May to November in 2018 and 2019. At different locations in each pond, thermal and chemical stratifications were observed, thermocline depth and strength were determined, and continuous water velocity profiles were measured. In addition, the effect of local weather conditions on stratification, thermocline, and hydrodynamics was investigated. The results showed that the ponds had vertical water temperature differences >1 °C for 99% of the time, May to August. In addition, salt-laden inflows from road deicing salts led to strong chemical stratification up to five times stronger in the sediment forebays than in the main cells in spring. Wind-induced surface currents were insignificant, scaling at 0.3% of the wind speed with negligible impact on vertical mixing in the ponds. Our results demonstrate that the ponds' strong and prolonged stratification decreased pollutant retention capacity and caused the water at depth to become anoxic, degrading the quality of the water discharged downstream. Hence, additional consideration of stratification is required when designing new stormwater ponds.


Subject(s)
Ponds , Water Pollutants, Chemical , Alberta , Salts , Water Pollutants, Chemical/analysis , Water Quality
13.
Water Sci Technol ; 86(9): 2454-2464, 2022 Nov.
Article in English | MEDLINE | ID: mdl-36378192

ABSTRACT

Sumps are commonly used in urban stormwater systems, which can be considered as a simple pretreatment device for stormwater quality control. However, they may function as pollution sources due to sediment washout under high flow conditions. An experimental study was conducted to investigate the scour process of predeposited sediments from a sump and its influencing parameters. Under conditions with large inflows or high sediment deposit, the sediment particles could be resuspended, entrained and flushed out. The washout mass decreased exponentially with time if the sediment bed surface depth was larger than a threshold value; otherwise, the amount of washout would be much smaller. The same scour pattern was observed for all the testing cases, of which the largest scour depth always occurred below the outlet. The deposit below the inlet might increase under conditions with high flow rates and low levels of sediment bed. Dimension analysis was performed and principal non-dimensional parameters were found, including the Péclet number, the pipe Froude number, and the dimensionless particle diameter, which can be used to determine whether the washout would occur and its intensity in a stormwater sump under given conditions.


Subject(s)
Bays , Geologic Sediments , Geologic Sediments/analysis , Rain
14.
Water Sci Technol ; 85(2): 633-644, 2022 Jan.
Article in English | MEDLINE | ID: mdl-35100144

ABSTRACT

In recent years, three simple tracers (conductivity, turbidity and temperature) have shown their advantages to many other tracers for tracing and assessment of extraneous water (or inflow and infiltration, I/I) into sewer systems due to low detection cost and high monitoring frequency. A better understanding of the error and uncertainty of the three simple tracers on the quantification of I/I will help to improve the reliability and reduce the cost of actual projects. A large-scale experimental model simulating a 36 m long sewer was constructed for conducting extraneous water flow tests including groundwater infiltration, wastewater inflow and hot water inflow under different I/I flow rates and concentrations. The accuracy and uncertainty of the three tracers were estimated, and their correlation with tracer concentration difference before and after extraneous inflow was also analyzed. Experimental results provide guidance for the practical applicability of the three tracers under different I/I conditions.


Subject(s)
Groundwater , Water , Reproducibility of Results , Sewage , Water Movements
15.
Ecotoxicol Environ Saf ; 216: 112218, 2021 Apr 09.
Article in English | MEDLINE | ID: mdl-33845365

ABSTRACT

Total dissolved gas (TDG) supersaturation caused by dam operations can cause fish gas bubble disease (GBD) and even fish kill. Few studies have examined the effects on pelagic species. Here, we examined the tolerance and avoidance characteristics of silver carp (Hypophthalmichthys molitrix), a pelagic fish widely distributed in the Yangtze River basin in China, under stress caused by TDG supersaturation. Silver carp had an average mortality rate of 7.5% ±â€¯1.8%, 92.5% ±â€¯1.8%, and 97.5% ±â€¯1.8% under 130%, 140% and 150% TDG supersaturation for 72 h of exposure, respectively. The average median lethal time (LT50) of silver carp was 18.1 h and 8.0 h under 140% and 150% TDG supersaturation, respectively. Bubbles and congestion appeared in the fins, gills and skin of silver carp. Silver carp can detect and avoid high TDG supersaturation. Significant avoidance behaviors were displayed by silver carp and the final avoidance rate was over 80% under 130% or above TDG conditions. The results of this study indicate that 130% TDG supersaturation triggered silver carp avoidance behaviors, and can be considered as the tolerance threshold.

16.
J Environ Manage ; 278(Pt 2): 111556, 2021 Jan 15.
Article in English | MEDLINE | ID: mdl-33137685

ABSTRACT

The Soil Water Assessment Tool (SWAT) was used for exploring the sources and retention dynamics of phosphorus nutrient in the river system of the Yong River Basin, China. The performance of the SWAT model was assessed. The retention dynamics of phosphorus nutrient in the river continuum and the factors contributing to those patterns were studied. The results showed that an average of 1828 tons of TP entered the river network of the Yong River Basin annually and in-stream processes trapped 1161 tons yr-1 of TP in the watercourse, which accounted for 63.5% of the annual TP inputs. The TP retention rates in the river network ranged from 3.08 to 63.43 mg m-2 day-1. An average of 666.9 tons of TP was delivered from the estuary to the East China Sea annually. The unit area riverine exports of TP ranged from 102.21 to 244.00 kg km-2 yr-1. The river network is a net sink for TP and is going through a phosphorus accumulation phase. The results confirm that the river system has a considerable phosphorus retention capacity that is highly variable on a spatiotemporal scale. Because of the cumulative effect of continued phosphorus removal along the entire flow path, the retention fractions of phosphorus removed from all streams at the basin scale is considerably higher than that of an individual river portion. The variations of hydrological regimes, water surface area, unit area inputs of phosphorus, and the concentrations of suspended sediments have a great influence on phosphorus retention.


Subject(s)
Rivers , Water Pollutants, Chemical , China , Environmental Monitoring , Nitrogen/analysis , Nutrients , Phosphorus/analysis , Soil , Water , Water Pollutants, Chemical/analysis
17.
Water Sci Technol ; 83(1): 173-183, 2021 Jan.
Article in English | MEDLINE | ID: mdl-33460416

ABSTRACT

Storm geysers have received significant attention lately due to its more frequent occurrences and the induced severe local flooding and infrastructure damages. Previous studies suggested that the air pocket pressure oscillated during geyser events especially in rapid filling process, but only the peak values were studied and the oscillation period was not discussed in detail. In this paper, a theoretical model was developed focusing on the period of the pressure oscillation induced by the expansion/compression of the air pocket below a water column in a vertical riser with film flow. It was found that the oscillation period was a function of the initial air pocket volume, initial air pocket pressure head, the riser diameter, and the initial water column length. The oscillation period increased with the air pocket pressure head and the air pocket volume, but decreased with the riser diameter and the polytropic coefficient. The oscillation period increased then decreased with an increasing water column length. Further, when considering the film flow along the riser, the oscillation period decreased slightly from the analytical solution. It was also found that the inflow rate change did not significantly influence the oscillation period.


Subject(s)
Water Movements , Water , Floods , Models, Theoretical , Pressure
18.
Water Sci Technol ; 83(6): 1286-1299, 2021 Mar.
Article in English | MEDLINE | ID: mdl-33767036

ABSTRACT

Storm geysers increasingly occur in sewer systems under climate change and rapid urbanization. Mitigation measures are in great demand to avoid safety problems. In this study, three-dimensional computational fluid dynamics models of single-inlet and multi-inlet systems were established to investigate geysering induced by rapid filling and assess the effectiveness of potential mitigation methods. The modeling results suggest that increasing the capacity of the downstream pipe before the inflow front reaches the chamber can effectively reduce the maximum geyser pressure. The peak pressure can be significantly mitigated when the chamber size is designed with care and the drop height between the upstream and downstream pipes is reduced. A diversion deflector with air vents and an orifice plate at the riser top end can alleviate the maximum pressure by about 65% with about 75% of the entrapped air being released. The peak pressure during the geyser event in the multi-inlet model is less than that of a single-inlet model under the same total inflow condition, but more water can be released.


Subject(s)
Bays , Models, Theoretical , Hydrodynamics , Water , Water Movements
19.
Water Sci Technol ; 81(5): 1029-1038, 2020 Mar.
Article in English | MEDLINE | ID: mdl-32541119

ABSTRACT

Occurrences of storm geyser events have attracted significant attention in recent years. Previous studies suggest that using an orifice plate can reduce the intensity of a geyser event but may induce a water-hammer type of pressure on the orifice plate. This study was conducted to explore the factors that influence the pressure transients when an orifice plate was installed in a vertical riser. A novel model was developed to simulated the movement of a rising water column driven by an air pocket in a vertical riser with an orifice plate on the top. Water-hammer type of pressure occurs when the water column reaches the orifice plate. The current model accurately simulates the dynamics of the water column considering its mass loss due to the flow along the wall of the riser (film flow) and the existence of the orifice plate. It was found that the initial water column length and the driving pressure, as well as the riser material, have a strong relationship with the peak pressure. The riser diameter and riser height have minor effect on the peak pressure. The water-hammer induced peak pressure reaches the maximum when the orifice opening is around 0.2 times the diameter of the vertical riser.


Subject(s)
Water
20.
Water Sci Technol ; 82(8): 1687-1700, 2020 Oct.
Article in English | MEDLINE | ID: mdl-33107862

ABSTRACT

A steady-state air flow model was developed and applied in a complex combined sewer system in the city of Edmonton, Alberta, Canada. The model solves the continuity at each junction and the momentum equation for the links coupled with dropshaft and other manholes. The dropshaft pressure gradient is computed using the dropshaft equation and air flow rate through manhole pickholes is computed considering the opening as an orifice. A leakage factor is used as a calibration parameter to represent the area through which air can leak from the manholes into the neighborhood. The model uses an iterative solution algorithm with a forward sweep for the continuity and backward sweep for the momentum equation. An underrelaxation is applied to update pressure in each iteration for model stability. The model was calibrated and validated by using the measured air flow rate and manhole pressure in the sewer network, with good results. An analysis of the air flow characteristics shows that a significant amount of air is brought into the system due to a large headspace in the upstream trunk but over 70% of this air is released into the neighborhood due to reduced headspace in the downstream trunk.


Subject(s)
Models, Theoretical , Alberta , Cities
SELECTION OF CITATIONS
SEARCH DETAIL