Steerable Microneedles Enabling Deep Delivery of Photosensitizers and CRISPR/Cas9 Systems for Effective Combination Cancer Therapy.

Although gene therapy has shown prospects in treating triple-negative breast cancer, it is insufficient to treat such a malignant tumor. Herein, nanoparticles (NPs)-embedded dissolving microneedles (IR780-PL/pFBXO44@MNs) with steerable and flectional property were developed to achieve the codelivery of FBXO44-targeted CRISPR/Cas9 plasmids (pFBXO44) and hydrophobic photosensitizers. For improved NP penetration in tumor tissue, collagenase@MNs were preapplied to degrade the tumor matrix. Under light irradiation, IR780 exhibited remarkable phototherapy, while the escape efficiency of NPs from lysosomes was improved. pFBXO44 was subsequently released in tumor cell cytoplasm via reducing the disulfide bonds of NPs, which could specifically knock out the FBXO44 gene to inhibit the migration and invasion of tumor cells. As a result, tumor cells were eradicated, and lung metastasis was effectively suppressed. This micelle-incorporated microneedle platform broadens the potential of combining gene editing and photo synergistic cancer therapy.

Minoxidil Nanosuspension-Loaded Dissolved Microneedles for Hair Regrowth.

Minoxidil (MIN) is used topically to treat alopecia. However, its low absorption limits its use, warranting a new strategy to enhance its delivery into skin layers. The objective of this study was to evaluate the dermal delivery of MIN by utilizing dissolved microneedles (MNs) loaded with MIN nanosuspension (MIN-NS) for hair regrowth. MIN-NS was prepared by the solvent-antisolvent precipitation technique. The particle size of MIN-NS was 226.7 ± 9.3 nm with a polydispersity index of 0.29 ± 0.17 and a zeta potential of -29.97 ± 1.23 mV. An optimized formulation of MIN-NS was selected, freeze-dried, and loaded into MNs fabricated with sodium carboxymethyl cellulose (Na CMC) polymeric solutions (MIN-NS-loaded MNs). MNs were evaluated for morphology, dissolution rate, skin insertion, drug content, mechanical properties, ex vivo permeation, in vivo, and stability studies. MNs, prepared with 14% Na CMC, were able to withstand a compression force of 32 N for 30 s, penetrate Parafilm M® sheet at a depth of 374-504 µm, and dissolve completely in the skin within 30 min with MIN %recovery of 95.1 ± 6.5%. The release of MIN from MIN-NS-loaded MNs was controlled for 24 h. MIN-NS-loaded MNs were able to maintain their mechanical properties and chemical stability for 4 weeks, when kept at different storage conditions. The in vivo study of the freeze-dried MIN-NS and MIN-NS-loaded MNs proved hair regrowth on rat skin after 11 and 7 days, respectively. These results showed that MIN-NS-loaded MNs could potentially improve the dermal delivery of MIN through the skin to treat alopecia.

Application of validated UV spectrophotometric and colorimetric method to quantify minoxidil in the development of trilayer dissolving microneedle: Proof of concept in ex vivo and in vivo studies in rats.

Alopecia areata (AA) is an autoimmune-induced hair loss condition, by utilizing MNX, a hair growth-promoting compound. However, minoxidil (MNX) administration's efficacy is hindered by low bioavailability and adverse effects. To enhance its delivery, Trilayer Dissolving Microneedles (TDMN) are introduced, enabling controlled drug release. The study's primary was to establish a validated UV-Vis Spectrophotometer method for Minoxidil analysis in rat skin affected by alopecia areata. This method adheres to International Conference Harmonization (ICH) and FDA guidelines, encompassing accuracy, precision, linearity, quantification limit (QL), and detection limit (DL). The validation method was conducted through two approaches, namely UV region validation using PBS and the colorimetric method in the visible region (Vis). The validated approach is then employed for assessing in vitro release, ex vivo permeation, and in vivo pharmacokinetics. Results indicate superior MNX extraction recovery using methanol compared to acetonitrile. Method C (5mL methanol) is optimal, offering high recovery with minimal solvent usage. Precision assessments demonstrate %RSD values within MNX guidelines (≤15%), affirming accuracy and reproducibility. UV-Vis spectroscopy quantifies MNX integration into TDMN, using PVA-PVP, with concentrations aligning with ICH standards (95% to 105%). In conclusion, TDMN holds promise for enhancing MNX delivery, mitigating bioavailability and side effect challenges. The validated UV-Vis Spectrophotometer method effectively analyzes MNX in skin tissues, providing insights into AA treatment and establishing a robust analytical foundation for future studies.

Fabrication of dissolving microneedles for transdermal delivery of protein and peptide drugs: polymer materials and solvent casting micromoulding method.

Proteins and peptides are rapidly developing pharmaceutical products and are expected to continue growing in the future. However, due to their nature, their delivery is often limited to injection, with drawbacks such as pain and needle waste. To overcome these limitations, microneedles technology is developed to deliver protein and peptide drugs through the skin. One type of microneedles, known as dissolving microneedles, has been extensively studied for delivering various proteins and peptides, including ovalbumin, insulin, bovine serum albumin, polymyxin B, vancomycin, and bevacizumab. This article discusses polymer materials used for fabricating dissolving microneedles, which are poly(vinylpyrrolidone), hyaluronic acid, poly(vinyl alcohol), carboxymethylcellulose, GantrezTM, as well as other biopolymers like pullulan and ulvan. The paper is focused solely on solvent casting micromoulding method for fabricating dissolving microneedles containing proteins and peptides, which will be divided into one-step and two-step casting micromoulding. Additionally, future considerations in the market plan for dissolving microneedles are discussed in this article.

A Rapid Corneal Healing Microneedle for Efficient Ocular Drug Delivery.

Fungal keratitis (FK) remains a serious clinical problem worldwide, so the ultimate goal of the treatment is to develop a minimally invasive, safe, and effective method for ocular drug delivery. Here, a minimally invasive delivery system is reported for treating FK by using a dissolving microneedle (MN)-array patch based on Poly(D,L-lactide) (PLA) and hyaluronic acid (HA). By altering the concentration of PLA, MN patches with excellent properties are modified and optimized. The 30% PLA-HA MN patches penetrate the corneal epithelial layer reversibly with no apparent ocular irritation as well as a short recovery time of less than 12 h, and increase the residence time by 2.5 h in the conjunctival sac, thereby offering higher drug bioavailability. Remarkably, the rabbit model of FK shows that the topical MN(+) patch medication exerts superior therapeutic effects compared with the conventional eye drop formulation, and also presents comparable therapeutic efficacy with that of the clinical mainstay strategy (i.e., intrastromal injection). Therefore, the MN patch, acting as an ocular drug delivery system with high efficacy and ability of rapid corneal healing, promises a cost-effective household solution for the treatment of FK, which may also lead to a new approach for treating FK in clinics.

Fabrication and characterization of dissolving microneedles for transdermal drug delivery of allopurinol.

Allopurinol (AP) is the first line drug in treating hyperuricemia and gout in clinical by oral drug delivery, which is associated with severe adverse effects and the hepatic first-pass effect. Herein, we first proposed AP encapsulated dissolving microneedles (DMNs) for transdermal drug delivery to realize the sustained drug release and avoid the hepatic first-pass effect, which will help to reduce the adverse effects and improve the bioavailability of AP. DMNs were fabricated by a suspension solution casting method with precisely controlled dose. They had sufficient mechanical strength to penetrate through the skin and resulted in the formation of hundreds of micropores in skin. The results of in vitro and ex vivo release experiments demonstrated that the release profile of DMNs was independent with the dose of AP, and they indeed had much higher drug delivery efficiency (DDE) than the equal amount of AP in solutions. In vivo DDE reached to 38.9% within 1 h, and the drug residual can be served as a drug reservoir for sustained drug release. The result of pharmacodynamic study further confirmed that the sustained release and the anti-hyperuricemia effect of DMNs encapsulating AP were achieved. Moreover, transepidermal water loss significantly increased to 49.50 ± 3.82 g/m2·h after the application of DMNs and returned to normal levels (12.25 ± 0.21 g/m2·h) after 8 h, indicating that the DMNs were well tolerated. These results suggest that transdermal drug delivery of AP by using DMNs is an efficient and safe alternative to currently available routes of administration.

[Preparation of triptolide-loaded dissolving microneedles and its transdermal penetration].

Triptolide(TP), the main active and toxic component of Tripterygium wilfordii, has the limitations of low bioavailability, poor absorption, low concentration in plasma, and small lethal dose. Microneedle(MN), the hybrid of hypodermic needle and transdermal patch, is a physical penetration-enhancing system. Dissolving microneedles(DMNs) can be tailored to specific needs of degradation rate. In this study, the TP-loaded DMNs(DMNs-TP) were prepared with the two-step centrifugation method. The optimal ratio of PVA to PVP K30, water content in matrix solution, demoulding method, and plasticizer for preparing DMNs were investigated with the indexes of formability and mechanical strength. The drug loading capacity was determined by HPLC and morphological characteristics were observed under an optical microscope. The mechanical properties were investigated by H&E staining and Franz diffusion cell was used to detect the in vitro skin permeation characteristics. Through the experiment, we confirmed that the optimal backing material should be PVA and PVP K30(3∶1) and the optimal ratio of matrix material to water should be 3∶4. The prepared DMNs-TP were pyramidal with smooth surface and length of approximately 550 µm. Each patch(2.75 cm~2) had the drug loading capacity of(153.41±2.29) µg, and TP was located in the upper part of the needle. The results of in vitro skin permeation assay demonstrated that the cumulative penetration of TP in DMNs-TP reached 80% in 24 h, while little TP solution penetrated the skin, which proved that DMNs promoted the transdermal delivery of TP.

Vaccination of fish against Aeromonas hydrophila infections using the novel approach of transcutaneous immunization with dissolving microneedle patches in aquaculture.

The aim of this study was to develop and evaluate a novel route of administration for vaccinating fish against Aeromonas hydrophila infection using a dissolving microneedles (MNs) patch. The A. hydrophila JUNAH strain was inactivated with formalin and used as a vaccine antigen. It was mixed with dissolvable carboxymethyl cellulose (CMC) as the matrix material to produce the MNs patches. When examined with a scanning electron microscope, each patch has 282 uniformly distributed, pyramid-shaped needles on a circular base. In the skin insertion experiment, the MNs patches were confirmed to be capable of penetrating the skin of the fish. Through agglutination assay and analysis of non-specific parameters like lysozyme and superoxide dismutase, it was verified that the antigen embedded into the patch induced adaptive and innate immune responses in the fish. In the challenge experiment, the group inoculated with the MNs patch and the group injected with formalin killed cells (FKC) showed a similar survival rate. Our results suggest that the FKC-loaded MNs patch is a wholly viable method alternative to injection for the vaccination of fish.

HPMC/PVP Dissolving Microneedles: a Promising Delivery Platform to Promote Trans-Epidermal Delivery of Alpha-Arbutin for Skin Lightening.

Alpha-arbutin is one of the most efficient skin lightener agents, which shows the effect on reducing the pigmentation by competitively inhibiting human tyrosinase. However, alpha-arbutin has difficulty in skin permeability due to its hydrophilic property. The objective of this study was, therefore, to develop alpha-arbutin-loaded dissolving microneedles (DMNs) for improving the delivery of alpha-arbutin into the skin. The DMN patch was prepared using Gantrez™ S-97, hydroxypropyl methylcellulose (HPMC), polyvinylpyrrolidone K-90 (PVP), chitosan, and their combinations. The optimal 8% alpha-arbutin-loaded DMNs, aside from Gantrez™ S-97, was successfully formulated with combination of 8% w/w HPMC and 40% w/w PVP K-90 (HPMC/PVP) at the weight ratio of 1:1. Both DMNs had 100% of penetration into porcine skin. Over 12 h of skin permeation, the flux of Gantrez™ S-97 DMNs and the HPMC/PVP DMNs were 66.21 µg/cm2/h and 74.24 µg/cm2/h, respectively. The accumulation amount of alpha-arbutin in the skin from Gantrez™ S-97 DMNs and HPMC/PVP DMNs was 107.76 µg and 312.23 µg, respectively. In comparison to the gel formulations, Gantrez™ S-97 DMNs and HPMC/PVP DMNs increase the delivery of alpha-arbutin across the skin approximately 2 and 4.7 times, respectively. In vivo studies found that alpha-arbutin-loaded HPMC/PVP DMNs delivered more alpha-arbutin into the skin than commercial cream. Moreover, the skin can reseal naturally after removal of DMNs patch without any signs of infection and remain stable in accelerated conditions for 4 weeks. Accordingly, alpha-arbutin-loaded HPMC/PVP DMNs could be a promising delivery platform for promoting trans-epidermal delivery of alpha-arbutin for skin lightening.

Therapeutic Drug Monitoring of Vancomycin in Dermal Interstitial Fluid Using Dissolving Microneedles.

OBJECTIVE: To design an alternative painless method for vancomycin (VCM) monitoring by withdrawing interstitial fluid (ISF) the skin using dissolving microneedles (DMNs) and possibly replace the conventional clinical blood sampling method. METHODS: Male Wistar rats were anesthetized with 50 mg/kg sodium pentobarbital. Vancomycin at 5 mg/mL in saline was intravenously administered via the jugular vein. ISF was collected from a formed pore at 15, 30, 45, 60, 75, 90, and 120 min after the DMNs was removed from the skin. In addition, 0.3 mL blood samples were collected from the left femoral vein. RESULTS: The correlation between the plasma and ISF VCM concentrations was significantly strong (r = 0.676, p < 0.05). Microscopic observation of the skin after application of the DMNs demonstrated their safety as a device for sampling ISF. CONCLUSION: A novel monitoring method for VCM was developed to painlessly determine concentrations in the ISF as opposed to blood sampling.

Dissolving microneedle-based intradermal delivery of interferon-α-2b.

The dermal and transdermal delivery of protein pharmaceuticals faces enormous challenges, and at the same time, has very significant potential for the non-invasive treatment of both localized and systemic diseases. To demonstrate the pharmaceutical usefulness of dissolving microneedles (MNs) containing interferon-α-2b (IFN), IFN MNs were prepared using a new method. IFN were encapsulated in MNs with dose from 4.94 ± 0.64 to 23.79 ± 2.48 µg, and in vitro release test showed the efficiency reached 49.2%. After percutaneous administration of IFN MNs to rats, serum IFN levels were measured for 12 h. The peak serum IFN level, maximum drug concentration (Cmax), and the time to reach maximum concentration (Tmax), were 11.58 ± ng/ml and 40 min, respectively, for high-dose MNs group. The area under the curve (AUC) of MNs group was 28.85 ng·h/ml, while intramuscular injection (IM) group with equal dose was 31.17 ng·h/ml. Immunogenicity analysis showed the anti-IFN antibody got back to normal level at ninth week, and there was no difference between male and female rats. IFN MNs showed good stability for 2 months and no damage to the administered rats' skin. The results demonstrated the IFN MNs have a great potential to provide an alternative to IM.

Innovative freeze-drying technique in the fabrication of dissolving microneedle patch: Enhancing transdermal drug delivery efficiency.

Microneedle patch (MNP) has become a hot research topic in the field of transdermal drug delivery due to its ability to overcome the stratum corneum barrier. Among the various types of microneedles, dissolving microneedles represent one of the most promising transdermal delivery methods. However, the most used method for preparing dissolving microneedles, namely microfabrication, suffers from issues such as long drying time, susceptibility to humidity, and large batch-to-batch variability, which limit the development of dissolving microneedles. In this study, we report for the first time a method for preparing dissolving microneedles using freeze-drying technology. We screened substrates suitable for freeze-dried microneedle patch (FD-MNP) and used coating technology to enhance the mechanical strength of FD-MNP, allowing them to meet the requirements for skin penetration. We successfully prepared FD-MNP using hyaluronic acid as the substrate and insulin as the model drug. Scanning electron microscopy revealed that the microneedles had a porous structure. After coating, the mechanical strength of the microneedles was 0.61 N/Needle, and skin penetration rate was 97%, with a penetration depth of 215 µm. The tips of the FD-MNP dissolved completely within approximately 60 s after skin penetration, which is much faster than conventional MNP (180 s). In vitro transdermal experiments showed that the FD-MNP shortened the lag time for transdermal delivery of rhodamine 123 and insulin compared to conventional MNP, indicating a faster transdermal delivery rate. Pharmacological experiments showed that the FD-MNP lowered mouse blood glucose levels more effectively than conventional MNP, with a relative pharmacological availability of 96.59 ± 2.84%, higher than that of conventional MNP (84.34 ± 3.87%), P = 0.0095. After storage under 40℃ for two months, the insulin content within the FD-MNP remained high at 95.27 ± 4.46%, which was much higher than that of conventional MNP (58.73 ± 3.71%), P < 0.0001. In conclusion, freeze-drying technology is a highly valuable method for preparing dissolving microneedles with potential applications in transdermal drug delivery.

Engineering Hyaluronic Acid Microneedles Loaded with Mn2+ and Temozolomide for Topical Precision Therapy of Melanoma.

Topical therapy has received worldwide attention for in situ tumors owing to its higher efficacy of drug delivery. Herein, this work reports a dissolvable multifunctional hyaluronic acid microneedles (HMNs) patch coloaded with temozolomide (TMZ) and MnCl2 (TMZ/MnCl2@HMN) for chemoimmunotherapy of melanoma. HMNs can ensure the stability of TMZ over time, and exhibit fewer side effects with a localized release way. In particular, TMZ not only promotes dendritic cell maturation by triggering immunogenic cell death in tumor cells, but also induces DNA damage that can further enhance the Mn2+-activated cGAS-STING (stimulator of interferon genes pathway). As a result, the TMZ/MnCl2@HMN multifunctional platform significantly inhibits lung metastases for melanoma, providing a practical strategy for precision therapy of melanoma.

Leveraging novel innovative thermoresponsive polymers in microneedles for targeted intradermal deposition.

Microneedles have garnered considerable attention over the years as a versatile pharmaceutical platform that could be leveraged to deliver drugs into and across the skin. In the current work, poly (N-isopropylacrylamide) (PNIPAm) is synthesized and characterized as a novel material for the development of a physiologically responsive microneedle-based drug delivery system. Typically, this polymer transitions reversibly between a swell state at lower temperatures and a more hydrophobic state at higher temperatures, enabling precise drug release. This study demonstrates that dissolving microneedles patches made from PNIPAm, incorporating BIS-PNIPAm, a crosslinked polymer variant, exhibit enhanced mechanical properties, evident from a smaller height reduction in microneedle (∼10 %). Although microneedles using PNIPAm alone were achievable, it displayed poor mechanical strength, requiring the inclusion of additional polymeric excipients like PVA to enhance mechanical properties. In addition, the incorporation of a thermoresponsive polymer did not have a significant (p > 0.05) impact on the insertion properties of the needles as all formulations inserted to a similar depth of 500 µm into ex vivo skin. Furthering this, the needles were loaded with a model payload, 1,1'-dioctadecyl-3,3,3',3'-tetramethylindodicarbocyanine perchlorate (DID) and the deposition of the cargo was monitored via multiphoton microscopy that showed that a deposit is formed at a depth of ≈200 µm. Also, it was revealed that crosslinked-PNIPAm (Bis-PNIPAm) formulations exhibited notable skin accumulationof the dye only after 4 h, independent of the excipient matrix used. This phenomenon was absent in non-crosslinked PNIPAm formulations, indicating a deposit formation in Bis-PNIPAm microneedle formulation. Collectively, this proof-of-concept study has advanced our understanding on the possibility to use PNIPAm for dissolving microneedle fabrication which could be harnessed for the deposition of nanoparticles into the dermis, for extended drug release within the skin.

Mechanical strength affecting the penetration in microneedles and PLGA nanoparticle-assisted drug delivery: Importance of preparation and formulation.

Microneedles (MNs) prepared from polymeric materials are painless and minimally invasive, safe and efficient, but they hindered by low mechanical strength and single diverse drug release pattern. Due to the distinctive mechanical strength and dimensions of poly(lactic-co-glycolic acid) (PLGA) nanoparticles (NPs), the integration of nano-technology with microneedles can effectively improve penetration and delivery efficiency through the stratum corneum. We herein designed a simple paroxetine (PAX)-loaded PLGA nanoparticles-integrated dissolving microneedles system (PAX-NPs-DMNs), aiming to improve the bioavailability of PAX through the synergistic permeation-enhancing effect of dissolving microneedles (DMNs) and NPs. PAX-NPs-DMNs had a complete tips molding rate (Neff) of (94.06 ± 2.16) %, a 15×15 quadrangular-conical microneedle array and an overall fracture force of 301.10 N, which were improved nearly 0.50 times compared with the blank microneedles (HA-DMNs) and PAX microneedles (PAX-DMNs). PAX-NPs-DMNs could extend the release duration of PAX from 1 h to 24 h and the cumulative permeability per unit area (Qn) was 47.66 times and 7.37 times higher than the PAX and the PAX-DMNs groups. PAX-NPs-DMNs could be rapidly dissolved within 10 min without hindering skin healing or causing adverse reactions. This study confirmed that PAX-NPs-DMNs can effectively improve the bioavailability of PAX and the mechanical strength of DMNs, which can easily penetrate the skin to provide sustained and painless delivery without causing adverse effects, thus offering a more convenient and effective method for central nervous diseases.

3D DLP-printed cannabinoid microneedles patch and its pharmacokinetic evaluation in rats.

OBJECTIVE: The objective of the present study was to enhance the bioavailability of cannabidiol (CBD) using 3D Digital Light Processing (DLP)-printed microneedle (MN) transdermal drug delivery system. METHODS: CBD MN patch was fabricated and optimized using 3D DLP printing using CBD (8% w/v), Lithium phenyl-2,4,6-trimethylbenzoylphosphinate (LAP) (0.49% w/v), distilled water (20% w/v), and poly (ethylene glycol) dimethacrylate 550 (PEGDAMA 550) (up to 100% w/v). CBD MNs were characterized for their morphology, mechanical strength, in vitro release study, ex vivo permeation study, and in vivo pharmacokinetic (PK) profile. KEY FINDINGS: Microscopic images showed that sharp CBD MNs with a height of ~800 µm, base diameter of ~250 µm, and tip with a radius of curvature (RoC) of ~15 µm were successfully printed using optimized printing parameters. Mechanical strength studies showed no significant deformation in the morphology of CBD MNs even after applying 0.5N/needle force. Ex vivo permeation study showed significant (P < .0001) permeation of CBD in the receiving media as compared to CBD patch (control). In vivo PK study showed significantly (P < .05) enhanced bioavailability in the case of CBD MN patch as compared to CBD subcutaneous inj. (control). CONCLUSION: Overall, systemic absorption of CBD was significantly enhanced using 3D-printed MN drug delivery system.

Cyclodextrin microneedles for the delivery of a nanoparticle-based peptide antigen vaccine.

In recent years, microneedles (MNs) have gained considerable interest in drug formulation due to their non-invasive and patient-friendly nature. Dissolving MNs have emerged as a promising approach to enhance drug delivery across the skin in a painless manner without generating sharp waste and providing the possibility for self-administration. Cyclodextrins, a group of cyclic oligosaccharides, are well-established in pharmaceutical products due to their safety and unique ability to form inclusion complexes with various drug molecules. In this manuscript, we report the development and characterization of dissolving MNs composed of cyclodextrins for intradermal delivery of a cyclodextrin-based nanoparticulate vaccine. Different cyclodextrins were tested and the most promising candidates were fabricated into MNs by micromolding. The MNs' piercing effectiveness and drug permeation across the skin were tested ex vivo. Furthermore, in vivo studies were carried out to assess the skin's tolerance to cyclodextrin-based MNs, and to evaluate the immune response using a model peptide antigen in a mouse model. The data revealed that the MNs were well-tolerated and effective, even leading to dose-sparing effects. This study highlights the potential of cyclodextrin-based dissolving MNs as a versatile platform for intradermal vaccine delivery, providing a compatible matrix for nanoparticulate formulations to enhance immune responses.

Fabrication and Characterization of Dissolving Microneedles Containing Oryza sativa L. Extract Complex for Enhancement of Transfollicular Delivery.

Dissolving microneedles are extensively applied in drug delivery systems to enhance penetration into the skin. In this study, dissolving microneedles fabricated from polyvinylpyrrolidone K90 (PVP-K90) and hydroxypropylmethyl cellulose (HPMC) E50 in different ratios were characterized. The selected formulations incorporated Oryza sativa L. extract complex and its characteristics, transfollicular penetration, and safety were observed. The microneedles, fabricated from PVP K90: HPMC E50 in a ratio of 25:5 (P25H5) and 20:10 (P20H10), revealed excellent morphological structure, proper mechanical strength, and excellent skin insertion. P25H5 microneedles exhibited faster dissolution than P20H10 microneedles. Microneedles containing Oryza sativa L. extract complex showed excellent morphological structure via scanning electron microscopy but decreased mechanical strength. P25H5-O, which exhibited an effective ability to enter skin, was selected for further investigation. This microneedle formulation had a high percentage of drug-loading content, enhanced skin penetration via the transfollicular route, and was safe for keratinocytes. As a result, the dissolving microneedle containing Oryza sativa L. extract complex can be used to enhance transfollicular delivery through the skin with safety.

Sustained-Release Hydrogen-Powered Bilateral Microneedles Integrating CD-MOFs for In Situ Treating Allergic Rhinitis.

Glucocorticoids are widely used for treating allergic rhinitis, but conventional intranasal administration encounters unfavorable nasal cilia clearance and nasal mucosal barrier. Herein, a bilateral microneedle patch is fabricated for delivering cyclodextrin-based metal-organic frameworks (CD-MOF) encapsulating dexamethasone (DXMS) and paeonol (Pae), while NaH particles are mounted on the basal part of each microneedle. By intranasal administration, the microneedles are propelled into the nasal mucosa by NaH-generated hydrogen and then swell to form a hydrogel for sustainedly releasing drugs. The DXMS/Pae combination is demonstrated to be superior to more than the twofold dose of DXMS alone for improving allergic rhinitis in rats. It involves reducing mast cell degranulation and modulating Treg/Th17 cell homeostasis, whereas inhibiting Th1 to Th2 differentiation is associated with regulating the GATA3/T-bet pathway, as well as repairing epithelial barrier function by increasing MUC1 and downregulating periostin. In addition, this delivery system modulates the lipid metabolism of the nasal mucosa. Notably, the newly designed device significantly enhances the drug's therapeutic effect, and NaH-generated hydrogen may have the potential adjunctive therapeutic effect. Collectively, such an emerging microneedle-mediated nasal drug delivery creates a new form for alleviating immune inflammation and contributes a promising solution to reduce clinical glucocorticoid abuse.

A one-stop integrated natural antimicrobial microneedles with anti-inflammatory, pro-angiogenic and long-term moisturizing properties to accelerate diabetic wound healing.

Diabetic ulcers present a formidable obstacle in diabetes management, typically leading to high mortality and amputation rates. To overcome traditional monotherapy drawbacks, We developed a novel microneedle strategy for combined antimicrobial action: ingeniously integrating quercetin with Platelet-derived Growth Factor-BB(PDGF-BB) and Sucrose Octasulfate(SOS) into the microneedle system(QPS MN). This method allows to penetrate through biofilms, administering quercetin nanocrystals and PDGF-BB deep into the tissue to combat microbial infection, mitigate inflammation, and promote angiogenesis. The accompanying backing material contains SOS, which absorbs wound exudate and forms a dressing that provides a moist environment for wound healing In an in vitro wound-scratch assay demonstrated that co-cultivating Human Umbilical Vein Endothelial Cells(HUVEC) with QPS MN for 48 h (90.3 ± 2.51 %) significantly enhanced cell migration compared to the control group (20.2 ± 1.41 %). Moreover, treatment of streptozotocin-induced diabetic wounds in rats with QPS MN for 14 days resulted in a wound healing rate of 96.56 ± 3.44 %, far surpassing the healing rate of only 40.34 ± 7.26 % observed in the untreated control group. Furthermore, the QPS MN treated wounds exhibited a notable increase in skin appendages and neovascularisation, indicating promising potential for achieving complete wound healing. These results suggest that QPS MN may offer substantial therapeutic benefits for addressing diabetic wounds.