SARS-CoV-2 Protein Nanoparticle Vaccines Formed In Situ From Lyophilized Lipids.

The receptor binding domain (RBD) of the SARS-CoV-2 Spike (S) glycoprotein is an appealing immunogen, but associated vaccine approaches must overcome the hapten-like nature of the compact protein and adapt to emerging variants with evolving RBD sequences. Here, a vaccine manufacturing methodology is proposed comprising a sterile-filtered freeze-dried lipid cake formulation that can be reconstituted with liquid proteins to instantaneously form liposome-displayed protein nanoparticles. Mannitol is used as a bulking agent and a small amount of Tween-80 surfactant is required to achieve reconstituted submicron particles that do not precipitate prior to usage. The lipid particles include an E. coli-derived monophosphoryl lipid A (EcML) for immunogenicity, and cobalt porphyrin-phospholipid (CoPoP) for antigen display. Reconstitution of the lipid cake with aqueous protein results in rapid conversion of the RBD into intact liposome-bound format prior to injection. Protein particles can readily be formed with sequent-divergent RBD proteins derived from the ancestral or Omicron strains. Immunization of mice elicits antibodies that neutralize respective viral strains. When K18-hACE2 transgenic mice are immunized and challenged with ancestral SARS-CoV-2 or the Omicron BA.5 variant, both liquid liposomes displaying the RBD and rapid reconstituted particles protect mice from infection, as measured by the viral load in the lungs and nasal turbinates.

Sugar-based Cryoprotectants Stabilize Liposomal Vesicles by Exhibiting a Cholesterol-like Effect.

Liposomal vesicles tend to fuse and aggregate during lyophilization. To avoid these events, cryoprotectants are added to the dispersion before lyophilization. Herein, we have compared the effect of three commonly used cryoprotectants (mannitol, MTL; trehalose, THL; and ß-cyclodextrin, ß-CD) upon structural characteristics of liposomes. The formulation was prepared using ethanol injection method, and cryoprotectants were tested at three dose levels (2, 6, and 10 mM). We have elucidated their effect on soy lecithin (SL) liposomes formulated with and without cholesterol (CHL). Characterizations were performed using scattering, thermal, and spectroscopic techniques. CHL molecules interacted hydrophobically with the SL bilayer. In spite of triggering a noticeable increase in the hydrodynamic diameter (about 30 nm), CHL promoted the stabilization of vesicles. Hydrogen bonding interactions were verified by the shift in -OH stretching over 3300-3500 cm-1. This manifested in an increased phase transition temperature (Tm) of SL liposomes. Tm increased further upon incorporation of cryoprotectants, particularly with ß-CD. Enthalpic changes were indicative of an affinity interaction between phospholipids and cryoprotectants, regardless of the presence of CHL. ß-CD showed concentration-dependent changes in the energetics of this interaction. The affinity of cryoprotectant-liposome interaction has been ranked as ß-CD ≫ THL > MNT.

Colyophilized Sugar-Polymer Dispersions for Enhanced Processing and Storage Stability.

Sucrose and trehalose pharmaceutical excipients are employed to stabilize protein therapeutics in a dried state. The mechanism of therapeutic protein stabilization is dependent on the sugars being present in an amorphous solid-state. Colyophilization of sugars with high glass transition polymers, polyvinylpyrrolidone (PVP), and poly(vinylpyrrolidone vinyl acetate) (PVPVA), enhances amorphous sugar stability. This study investigates the stability of colyophilized sugar-polymer systems in the frozen solution state, dried state postlyophilization, and upon exposure to elevated humidity. Binary systems of sucrose or trehalose with PVP or PVPVA were lyophilized with sugar/polymer ratios ranging from 2:8 to 8:2. Frozen sugar-PVPVA solutions exhibited a higher glass transition temperature of the maximally freeze-concentrated amorphous phase (Tg') compared to sugar-PVP solutions, despite the glass transition temperature (Tg) of PVPVA being lower than PVP. Tg values of all colyophilized systems were in a similar temperature range irrespective of polymer type. Greater hydrogen bonding between sugars and PVP and the lower hygroscopicity of PVPVA influenced polymer antiplasticization effects and the plasticization effects of residual water. Plasticization due to water sorption was investigated in a dynamic vapor sorption humidity ramping experiment. Lyophilized sucrose systems exhibited increased amorphous stability compared to trehalose upon exposure to the humidity. Recrystallization of trehalose was observed and stabilized by polymer addition. Lower concentrations of PVP inhibited trehalose recrystallization compared to PVPVA. These stabilizing effects were attributed to the increased hydrogen bonding between trehalose and PVP compared to trehalose and PVPVA. Overall, the study demonstrated how differences in polymer hygroscopicity and hydrogen bonding with sugars influence the stability of colyophilized amorphous dispersions. These insights into excipient solid-state stability are relevant to the development of stabilized biopharmaceutical solid-state formulations.

Protecting Lyophilized Escherichia coli Adenylate Kinase.

Drying protein-based drugs, usually via lyophilization, can facilitate storage at ambient temperature and improve accessibility but many proteins cannot withstand drying and must be formulated with protective additives called excipients. However, mechanisms of protection are poorly understood, precluding rational formulation design. To better understand dry proteins and their protection, we examine Escherichia coli adenylate kinase (AdK) lyophilized alone and with the additives trehalose, maltose, bovine serum albumin, cytosolic abundant heat soluble protein D, histidine, and arginine. We apply liquid-observed vapor exchange NMR to interrogate the residue-level structure in the presence and absence of additives. We pair these observations with differential scanning calorimetry data of lyophilized samples and AdK activity assays with and without heating. We show that the amino acids do not preserve the native structure as well as sugars or proteins and that after heating the most stable additives protect activity best.

Predicting the Stability of Formulations Containing Lyophilized Human Serum Albumin and Sucrose/Trehalose Using Solid-State NMR Spectroscopy.

Stabilization of proteins by disaccharides in lyophilized formulations depends on the interactions between the protein and the disaccharide (system homogeneity) and the sufficiently low mobility of the system. Human serum albumin (HSA) was lyophilized with disaccharides (sucrose and/or trehalose) in different relative concentrations. Solid-state nuclear magnetic resonance (ssNMR) spectroscopy 1H T1 and 1H T1ρ relaxation times were measured to determine the homogeneity of the lyophilized systems on 20-50 and 1-3 nm domains, respectively, with 1H T1 relaxation times also being used to determine the ß-relaxation rate. HSA/sucrose systems had longer 1H T1 relaxation times and were slightly more stable than HSA/trehalose systems in almost all cases shown. HSA/sucrose/trehalose systems have 1H T1 relaxation times between the HSA/sucrose and HSA/trehalose systems and did not result in a more stable system compared with binary systems. Inhomogeneity was evident in a sample containing relative concentrations of 10% HSA and 90% trehalose, suggesting trehalose crystallization during lyophilization. Under these stability conditions and with these ssNMR acquisition parameters, a 1H T1 relaxation time below 1.5 s correlated with an unstable sample, regardless of the disaccharide(s) used.

Near UV and Visible Light Photodegradation in Solid Formulations: Generation of Carbon Dioxide Radical Anions from Citrate Buffer and Fe(III).

Near UV and visible light photodegradation can target therapeutic proteins during manufacturing and storage. While the underlying photodegradation pathways are frequently not well-understood, one important aspect of consideration is the formulation, specifically the formulation buffer. Citrate is a common buffer for biopharmaceutical formulations, which can complex with transition metals, such as Fe(III). In an aqueous solution, the exposure of such complexes to light leads to the formation of the carbon dioxide radical anion (•CO2-), a powerful reductant. However, few studies have characterized such processes in solid formulations. Here, we show that solid citrate formulations containing Fe(III) lead to the photochemical formation of •CO2-, identified through DMPO spin trapping and HPLC-MS/MS analysis. Factors such as buffers, the availability of oxygen, excipients, and manufacturing processes of solid formulations were evaluated for their effect on the formation of •CO2- and other radicals such as •OH.

Clinical and Preclinical Methods of Heat-Stabilization of Human Vaccines.

Vaccines have historically faced challenges regarding stability, especially in regions lacking a robust cold chain infrastructure. This review delves into established and emergent techniques to improve the thermostability of vaccines. We discuss the widely practiced lyophilization method, effectively transforming liquid vaccine formulations into a solid powdered state, enhancing storage and transportation ability. However, potential protein denaturation during lyophilization necessitates alternative stabilization methods. Cryoprotectants, namely, starch and sugar molecules, have shown promise in protecting vaccine antigens and adjuvants from denaturation and augmenting the stability of biologics during freeze-drying. Biomineralization, a less studied yet innovative approach, utilizes inorganic or organic-inorganic hybrids to encapsulate biological components of vaccines with a particular emphasis on metal-organic coordination polymers. Encapsulation in organic matrices to form particles or microneedles have also been studied in the context of vaccine thermostability, showing some ability to store outside the cold-chain. Unfortunately, few of these techniques have advanced to clinical trials that evaluate differences in storage conditions. Nonetheless, early trials suggest that alternative storage techniques are viable and emphasize the need for more comprehensive studies. This review underscores the pressing need for heat-stable vaccines, especially in light of the increasing global distribution challenges. Combining traditional methods with novel approaches holds promise for the future adaptability of vaccine distribution and use.

Protective effects of different lyoprotectants on survival of clinical bacterial isolates in a hospital biobank.

Nowadays the significant role of biobanks in medical, diagnostic, industrial, and environmental research is well known. Bacterial biobanks could be used as a good resource for designing new treatments, biomedical and industrial researches, and laboratory diagnostics. To have a collection of bacteria from clinical samples and maintain their long-term viability, their preservation needs appropriate protective agents, like cryoprotectants and lyoprotectants. In this study, we collected and characterized Gram-negative and Gram-positive bacteria carrying important antibiotic resistance markers from different clinical samples of hospitalized children. Sucrose (10%), skimmed milk (10%), skimmed milk plus sodium glutamate (10% + 1%), and bovine serum albumin (BSA, 10%) were used as lyoprotectants during the freeze-drying procedure. The survival rate of the lyophilized samples was calculated by dilution plating and measuring the colony forming unit (CFU) after 3 months of storage. The culture analysis results indicated that 25 of the 27 studied bacterial genera (Dilutions 10-3 to 10-6), including Shigella, Methicillin-resistant S. aureus, Acinetobacter spp., Escherichia spp., Pseudomonas spp., Klebsiella spp., Enterococcus spp., were recovered in cultured fractions from all preservation conditions, while 2 genera were only detected in a single preservation condition (2/27, 7.4%). Based on the results, sucrose (10%) and skimmed milk (10%) presented the most protective features. The survival rates varied significantly according to types of the bacteria. Collectively, our results showed a diversity in the recovery of different bacterial genera after lyophilization. While statistically no significant difference was detected among the studied protective agents, sucrose (10%) and skimmed milk (10%) exhibited more effective lyoprotective properties for both Gram-positive and Gram-negative bacteria among the clinical isolates in our study.

Impact of protectants and the method of preservation on the stability of potentially probiotic bacteria.

Probiotics offer health advantages when consumed in adequate quantities. As ongoing research identifies promising new strains, ensuring their viability and functionality through simple preservation methods is vital for success within the probiotic industry. This study employed a factorial design to investigate the combined effects of four cryoprotectants [C1: MRS broth + 14 % (w/v) glycerol, C2: Aqueous solution containing 4 % (w/v) trehalose, 6 % (w/v) skimmed milk, and 4 % (w/v) sodium glutamate, C3: Aqueous solution containing 10 % (w/v) skimmed milk and 4 % (w/v) sodium glutamate, C4: Aqueous solution containing 4 % (w/v) sucrose, 6 % (w/v) skimmed milk, and 4 % (w/v) sodium glutamate] and three methods of preservation (P1: -86 °C freezing, P2: -196 °C liquid nitrogen freezing, and P3: storing at 4 °C after lyophilization) on the cell viability of three potentially probiotic strains over 12 months. Pediococcus sp P15 and Weissella cibaria ml6 had the highest viability under treatments C3 and C2, after 12 months of storage, respectively. Meanwhile, Lactococcus lactis ml3 demonstrated the highest viability in both treatments C2 and C4 (P ≤ 0.05). According to the results freezing, either P1 or P2, is the most effective preservation method for P. sp P15 and W. cibaria ml6. Meanwhile, L. lactis ml3 showed the highest colony count under treatment (P1) after 12 months of storage (P ≤ 0.05). Among the tested conditions, P. sp P15 and L. lactis ml3 exhibited the highest viability and bile salt resistance when stored under P1C1. For W. cibaria ml6, the optimal storage condition was P2C2 (frozen in liquid nitrogen with cryoprotectant C2).

Lactococcus lactis MA5 is a potential autochthonous probiotic for nutrient digestibility enhancement and bacterial pathogen inhibition in hybrid catfish (Ictalurus punctatus × I. furcatus).

With the emergence of diseases, the U.S. catfish industry is under challenge. Current trends prefer autochthonous bacteria as potential probiotic candidates owing to their adaptability and capacity to effectively colonize the host's intestine, which can enhance production performance and bolster disease resistance. The objective of this study was to isolate an autochthonous bacterium as probiotic for hybrid catfish. Initially, an analysis of the intestinal microbiota of hybrid catfish reared in earthen ponds was conducted for subsequent probiotic development. Twenty lactic acid bacteria were isolated from the digesta of overperforming catfish, and most of the candidates demonstrated probiotic traits, including proteolytic and lipolytic abilities; antagonistic inhibition of catfish enteric bacterial pathogens, negative haemolytic activity and antibiotic susceptibility. Subsequent to this screening process, an isolate of Lactococcus lactis (MA5) was deemed the most promising probiotic candidate. In silico analyses were conducted, and several potential probiotic functions were predicted, including essential amino acids and vitamin synthesis. Moreover, genes for three bacteriocins, lactococcin A, enterolysin A and sactipeptide BmbF, were identified. Lastly, various protectant media for lyophilization of MA5 were assessed. These findings suggest that Lactococcus lactis MA5 can be an autochthonous probiotic from hybrid catfish, holding promise to be further tested in feeding trials.

An important detail that is still not clear in amniotic membrane applications: How do we store the amniotic membrane best?

The use of fresh amniotic membrane (AM) is not a viable option, as it has many disadvantages. Preserving the AM reduces the risk of cross-infection and maintains its effectiveness for a long time. In order to maximize the therapeutic effects of the AM, the basic need is to preserve its vitality and the bioactive molecules it contains. However, the effect of preservation procedures on cell viability and growth factors is a still matter of debate. Optimum preservation method is expected to be cost-effective, easily-accessible, and most importantly, to preserve the effectiveness of the tissue for the longest time. However, each preservation technique has its advantages and disadvantages over the other, and each one compromises the vitality and bioactive molecules of the tissue to some extent. Therefore, the best method of preservation is still controversial, and the question of 'how to preserve the AM best?' has not yet been definitively answered.

Development and Validation of the MAST ISOPLEX®VTEC Kit for Simultaneous Detection of Shiga Toxin/Verotoxin 1 and 2 (stx1/vt1 and stx2/vt2) with Inhibition Control (IC) in a Rapid Loop-Mediated Isothermal Amplification (LAMP) Multiplex Assay.

Loop-mediated isothermal amplification (LAMP) is a cost-effective, rapid, and highly specific method of replicating nucleic acids. Adding multiple targets into a single LAMP assay to create a multiplex format is highly desirable for clinical applications but has been challenging due to a need to develop specific detection techniques and strict primer design criteria. This study describes the evaluation of a rapid triplex LAMP assay, MAST ISOPLEX®VTEC, for the simultaneous detection of Shiga toxin/verotoxin 1 and 2 (stx1/vt1 and stx2/vt2) genes in verotoxigenic Escherichia coli (E. coli) (VTEC) isolates with inhibition control (IC) synthetic DNA using a single fluorophore-oligonucleotide probe, MAST ISOPLEX®Probes, integrated into the primer set of each target. MAST ISOPLEX®Probes used in the MAST ISOPLEX®VTEC kit produce fluorescent signals as they integrate with reaction products specific to each target, allowing tracking of multiple amplifications in real time using a real-time analyzer. Initial validation on DNA extracts from fecal cultures and synthetic DNA sequences (gBlocks) showed that the MAST ISOPLEX®VTEC kit provides a method for sensitive simultaneous triplex detection in a single assay with a limit of detection (LOD) of less than 100 target copies/assay and 96% and 100% sensitivity and specificity, respectively.

Development of a Stable Lyophilized Cyclophosphamide Monohydrate Formulation Using Non-Aqueous Solvents.

To ensure product stability, it is critical to maintain the monohydrate state of cyclophosphamide following lyophilization, as this is the most stable solid form of the Cyclophosphamide. On the other hand, because of their limited aqueous solubility and stability, non-aqueous solvents are preferred for determining the composition and stability of bulk solutions. Hence, the purpose of this study was to use non-aqueous solvents for determining the composition and stability of bulk solutions, and to shorten the lyophilization process by retaining the cyclophosphamide monohydrate. Furthermore, prior to selecting the solvent for the bulk solution consisting of 90:10 tertiary butyl alcohol (TBA) and acetonitrile (ACN), various factors were taken into account, including the freezing point, vapor pressure of solvents, solubility, and stability of cyclophosphamide monohydrate. The concentration of the bulk solution was adjusted to 200 mg/mL in order to optimize the fill volume, enhance sublimation rates at lower temperatures during primary drying, and eliminate the need for secondary drying. The differential scanning calorimetry (DSC) measurements of bulk solution were used to improve the lyophilization cycle. The lyophilization cycle opted was freezing at a temperature of -55 °C with annealing step at -22 °C by which the reconstitution time was significantly reduced. The drying was performed at below - 25 °C while maintaining a chamber pressure of 300 mTorr. The complete removal of non-aqueous solvents was achieved by retaining water within the system. The presence of cyclophosphamide monohydrate was confirmed using X-ray diffraction (XRD). The reduction of lyophilization process time was established by conducting mass transfer tests and evaluating the physicochemical properties of the pharmaceutical product. Using non-aqueous solvents for freeze-drying cyclophosphamide is a viable option, and this study provides significant knowledge for the advancement of future generic pharmaceuticals.

Quality-by-Design Based Development of Doxycycline Hyclate-Loaded Polymeric Microspheres for Prolonged Drug Release.

This study explores a novel approach to address the challenges of delivering highly water-soluble drug molecules by employing hydrophobic ion-pairing (HIP) complexes within poly (lactic-co-glycolic acid) (PLGA) microspheres. The HIP complex, formed between doxycycline hyclate (DH) and docusate sodium (DS), renders the drug hydrophobic. The development of the microspheres was done using the QbD approach, namely, Box-Behnken Design (BBD). A comprehensive characterization of the HIP complex confirmed the successful conversion of DH. DH and the HIP complex were effectively loaded into PLGA microspheres using the oil-in-water (O/W) emulsion solvent evaporation method. Results demonstrated significant improvements in percentage entrapment efficiency (% EE) and drug loading (% DL) for DH within the HIP complex-loaded PLGA microspheres compared to DH-loaded microspheres alone. Additionally, the initial burst release of DH reduced to 3% within the initial 15 min, followed by sustained drug release over 8 days. The modified HIP complex strategy offers a promising platform for improving the delivery of highly water-soluble small molecules. It provides high % EE, % DL, minimal initial burst release, and sustained release, thus having the potential to enhance patient compliance and drug delivery efficiency.

Optimization of fecal sample homogenization for untargeted metabolomics.

INTRODUCTION: Fecal samples are highly complex and heterogeneous, containing materials at various stages of digestion. The heterogeneity and complexity of feces make stool metabolomics inherently challenging. The level of homogenization influences the outcome of the study, affecting the metabolite profiles and reproducibility; however, there is no consensus on how fecal samples should be prepared to overcome the topographical discrepancy and obtain data representative of the stool as a whole. OBJECTIVES: Various combinations of homogenization conditions were compared to investigate the effects of bead size, addition of solvents and the differences between wet-frozen and lyophilized feces. METHODS: The homogenization parameters were systematically altered to evaluate the solvent usage, bead size, and whether lyophilization is required in homogenization. The metabolic coverage and reproducibility were compared among the different conditions. RESULTS: The current work revealed that a combination of mechanical and chemical lysis obtained by bead-beating with a mixture of big and small sizes of beads in an organic solvent is an effective way to homogenize fecal samples with adequate reproducibility and metabolic coverage. Lyophilization is required when bead-beating is not available. CONCLUSIONS: A comprehensive and systematical evaluation of various fecal matter homogenization conditions provides a profound understanding for the effects of different homogenization methods. Our findings would be beneficial to assist with standardization of fecal sample homogenization protocol.

Enhancing long-term storage and stability of engineered living materials through desiccant storage and trehalose treatment.

Engineered living materials (ELMs) have broad applications for enabling on-demand bioproduction of compounds ranging from small molecules to large proteins. However, most formulations and reports lack the capacity for storage beyond a few months. In this study, we develop an optimized procedure to maximize stress resilience of yeast-laden ELMs through the use of desiccant storage and 10% trehalose incubation before lyophilization. This approach led to over 1-year room temperature storage stability across a range of strain genotypes. In particular, we highlight the superiority of exogenously added trehalose over endogenous, engineered production in yielding robust preservation resilience that is independent of cell state. This simple, effective protocol enables sufficient accumulation of intracellular trehalose over a short period of contact time across a range of strain backgrounds without requiring the overexpression of a trehalose importer. A variety of microscopic analysis including µ-CT and confocal microscopy indicate that cells form spherical colonies within F127-BUM ELMs that have variable viability upon storage. The robustness of the overall procedure developed here highlights the potential for widespread deployment to enable on-demand, cold-chain independent bioproduction.

Effect of Atomic Layer Coating on the Stability of Solid Myoglobin Formulations.

The effects of atomic layer (ALC) coating on physical properties and storage stability were examined in solid powders containing myoglobin, a model protein. Powders containing myoglobin and mannitol (1:1 w/w) were prepared by lyophilization or spray drying and subjected to aluminum oxide or silicon oxide ALC coating. Uncoated samples of these powders as well as coated and uncoated samples of myoglobin as received served as controls. After preparation (t0), samples were analyzed for moisture content, reconstitution time, myoglobin secondary structure, crystallinity, and protein aggregate content. Samples were stored for 3 months (t3) under controlled conditions (53% RH, 40 °C) in both open and closed vials and then analyzed as above. At t3, the recovery of soluble native (i.e., monomeric) protein depended on formulation, coating type, and drying method and was up to 2-fold greater in coated samples than in uncoated controls. Promisingly, some samples with high recovery also showed low soluble aggregate content (<10%) at t3 and low total monomer loss; the latter was correlated to sample moisture content. Overall, the results demonstrate that ALC coatings can stabilize solid protein formulations during storage, providing benefits over uncoated controls.

Design of Redispersible High-Drug-Load Amorphous Formulations: Impact of Ionic vs Nonionic Surfactants on Processing and Performance.

Amorphous solid dispersions (ASDs) are an enabling formulation approach used to enhance bioavailability of poorly water-soluble molecules in oral drug products. Drug-rich amorphous nanoparticles generated in situ during ASD dissolution maintain supersaturation that drives enhanced absorption. However, in situ formation of nanoparticles requires large quantities of polymers to release drugs rapidly, resulting in an ASD drug load <25%. Delivering directly engineered drug-rich amorphous nanoparticles can reduce the quantities of polymers significantly without sacrificing bioavailability. Preparation of 90% drug-load amorphous nanoparticles (ANPs) of <300 nm diameter using solvent/antisolvent nanoprecipitation, organic solvent removal, and spray drying was demonstrated previously on model compound ABT-530 with Copovidone and sodium dodecyl sulfate (anionic). In this work, nonionic surfactant d-α-tocopheryl polyethylene glycol succinate (Vitamin E TPGS, or TPGS) was used to prepare ANPs as a comparison. Characterization of ANPs by dynamic light scattering, filtrate potency assay, scanning electron microscopy, and differential scanning calorimetry revealed differences in surface properties of nanoparticles afforded by surfactants. This work demonstrates the importance of understanding the impact of the stabilizing agents on nanoparticle behavior when designing a high-drug-load amorphous formulation for poorly water-soluble compounds as well as the impact on redispersion.

A strategy to promote the convenient storage and direct use of polyhydroxybutyrate-degrading Bacillus sp. JY14 by lyophilization with protective reagents.

BACKGROUND: Bioplastics are attracting considerable attention, owing to the increase in non-degradable waste. Using microorganisms to degrade bioplastics is a promising strategy for reducing non-degradable plastic waste. However, maintaining bacterial viability and activity during culture and storage remains challenging. With the use of conventional methods, cell viability and activity was lost; therefore, these conditions need to be optimized for the practical application of microorganisms in bioplastic degradation. Therefore, we aimed to optimize the feasibility of the lyophilization method for convenient storage and direct use. In addition, we incoporated protective reagents to increase the viability and activity of lyophilized microorganisms. By selecting and applying the best protective reagents for the lyophilization process and the effects of additives on the growth and PHB-degrading activity of strains were analyzed after lyophilization. For developing the lyophilization method for protecting degradation activity, it may promote practical applications of bioplastic-degrading bacteria. RESULTS: In this study, the polyhydroxybutyrate (PHB)-degrading strain, Bacillus sp. JY14 was lyophilized with the use of various sugars as protective reagents. Among the carbon sources tested, raffinose was associated with the highest cell survival rate (12.1%). Moreover, 7% of raffionose showed the highest PHB degradation yield (92.1%). Therefore, raffinose was selected as the most effective protective reagent. Also, bacterial activity was successfully maintained, with raffinose, under different storage temperatures and period. CONCLUSIONS: This study highlights lyophilization as an efficient microorganism storage method to enhance the applicability of bioplastic-degrading bacterial strains. The approach developed herein can be further studied and used to promote the application of microorganisms in bioplastic degradation.

Practical Advice on Scientific Design of Freeze-Drying Process: 2023 Update.

OBJECTIVE: The purpose of this paper is to re-visit the design of three steps in the freeze-drying process, namely freezing, primary drying, and secondary drying steps. Specifically, up-to-date recommendations for selecting freeze-drying conditions are provided based on the physical-chemical properties of formulations and engineering considerations. METHODS AND RESULTS: This paper discusses the fundamental factors to consider when selecting freezing, primary drying, and secondary drying conditions, and offers mathematical models for predicting the duration of each segment and product temperature during primary drying. Three simple heat/mass transfer primary drying (PD) models were tested, and their ability to predict product temperature and sublimation time showed good agreement. The PD models were validated based on the experimental data and utilized to tabulate the primary drying conditions for common pharmaceutical formulations, including amorphous and partially crystalline products. Examples of calculated drying cycles, including all steps, for typical amorphous and crystalline formulations are provided. CONCLUSIONS: The authors revisited advice from a seminal paper by Tang and Pikal (Pharm Res. 21(2):191-200, 2004) on selecting freeze-drying process conditions and found that the majority of recommendations are still applicable today. There have been a number of advancements, including methods to promote ice nucleation and computer modeling for all steps of freeze-drying process. The authors created a database for primary drying and provided examples of complete freeze-drying cycles design. The paper may supplement the knowledge of scientists and formulators and serve as a user-friendly tool for quickly estimating the design space.