Mass spectrometric fragmentation and photocatalytic transformation of nicotine and cotinine.

RATIONALE: Nicotine and cotinine are, respectively, alkaloids produced mainly by the Solanaceae plant family, especially tobacco, and its most important human metabolite. These compounds are frequently found as contaminants in wastewater or landfill samples and they could be used to evaluate pollution by tobacco use. The aim of this study is to improve the knowledge about possible transformation pathways of nicotine and cotinine. This would help the identification of degradants by using HPLC coupled with a high resolving power mass analyzer (LTQ-Orbitrap). In addition, we evaluated toxicity on bioluminescent photobacteria to indicate possible relationships between the formation of transformation products and their toxic effects. METHODS: The transformation of nicotine and cotinine and the formation of intermediate products were evaluated adopting titanium dioxide as photocatalyst. The structural identification of photocatalytic transformation products of these two alkaloids was based on LC/multistage MS experiments. High-resolution MS allowed the elemental composition of these products to be hypothesized. The evolution of toxicity as a function of the irradiation time was also studied using a bioluminescent photobacterium (Vibrio fischeri) test. RESULTS: Several products were formed and characterized using HPLC/HRMSn . The main photocatalytic pathways involving nicotine and cotinine appear to be hydroxylation, demethylation and oxidation. Nine degradants were formed from nicotine, including cotinine. Seven degradants were generated from cotinine. There is no transformation product in common between the two studied molecules. CONCLUSIONS: The study of photocatalytic degradation allowed us to partially simulate human metabolism and the environmental transformation of the bioactive alkaloid nicotine. We searched for some of the identified transformation products in river water and landfill percolate by solid-phase extraction and HPLC/HRMS and eventually their presence was confirmed. These new findings could be of interest in further metabolism and environmental pollution studies. Copyright © 2016 John Wiley & Sons, Ltd.

Effects of magnesium sulfate on the luminescence of Vibrio fischeri under nutrient-starved conditions.

In this study, we investigated the relationship between MgSO(4) and luminescence in Vibrio fischeri under nutrient-starved conditions. When V. fischeri was cultured in an artificial seawater medium, the luminescence intensity was low relative to that observed under normal growth conditions. It decreased during the initial 14 h, and then increased slightly at 24 h. This regulation of luminescence was not dependent on the quorum-sensing mechanism, because the cell densities had not reached a critical threshold concentration. Under MgSO(4)-starved conditions, luminescence was not fully induced at 14 h, and decreased at 24 h. In contrast, induction of luminescence occurred under MgSO(4)-supplemented conditions, but MgSO(4) alone was insufficient to induce luminescence, and required NaHCO(3) or KCl. These results suggest that the luminescence of V. fischeri is controlled by an exogenous sulfur source under nutrient-starved conditions. In addition, they indicate that the induction of sulfur-dependent luminescence is regulated by the NaHCO(3) or KCl concentration.

Antimicrobial photodynamic therapy: study of bacterial recovery viability and potential development of resistance after treatment.

Antimicrobial photodynamic therapy (aPDT) has emerged in the clinical field as a potential alternative to antibiotics to treat microbial infections. No cases of microbial viability recovery or any resistance mechanisms against it are yet known. 5,10,15-tris(1-Methylpyridinium-4-yl)-20-(pentafluorophenyl)-porphyrin triiodide (Tri-Py(+)-Me-PF) was used as photosensitizer. Vibrio fischeri and recombinant Escherichia coli were the studied bacteria. To determine the bacterial recovery after treatment, Tri-Py(+)-Me-PF (5.0 microM) was added to bacterial suspensions and the samples were irradiated with white light (40 W m(-2)) for 270 minutes. Then, the samples were protected from light, aliquots collected at different intervals and the bioluminescence measured. To assess the development of resistance after treatment, bacterial suspensions were exposed to white light (25 minutes), in presence of 5.0 microM of Tri-Py(+)-Me-PF (99.99% of inactivation) and plated. After the first irradiation period, surviving colonies were collected from the plate and resuspended in PBS. Then, an identical protocol was used and repeated ten times for each bacterium. The results suggest that aPDT using Tri-Py(+)-Me-PF represents a promising approach to efficiently destroy bacteria since after a single treatment these microorganisms do not recover their viability and after ten generations of partially photosensitized cells neither of the bacteria develop resistance to the photodynamic process.

Confirming Pseudomonas putida as a reliable bioassay for demonstrating biocompatibility enhancement by solar photo-oxidative processes of a biorecalcitrant effluent.

Experiments based on Vibrio fischeri, activated sludge and Pseudomonas putida have been employed to check variation in the biocompatibility of an aqueous solution of a commercial pesticide, along solar photo-oxidative process (TiO(2) and Fenton reagent). Activated sludge-based experiments have demonstrated a complete detoxification of the solution, although important toxicity is still detected according to the more sensitive V. fischeri assays. In parallel, the biodegradability of organic matter is strongly enhanced, with BOD(5)/COD ratio above 0.8. Bioassays run with P. putida have given similar trends, remarking the convenience of using P. putida culture as a reliable and reproducible method for assessing both toxicity and biodegradability, as a substitute to other more time consuming methods.

Bioluminescence of Vibrio fischeri: bacteria respond quickly and sensitively to pulsed microwave electric (but not magnetic) fields.

Biological systems with intrinsic luminescent properties serve as powerful and noninvasive bioreporters for real-time and label-free monitoring of cell physiology. This study employs the bioluminescent marine bacterium Vibrio fischeri to investigate the effects of separated microwave electric (E) and magnetic (H) fields. Using a cylindrical TM010 mode aluminum resonant cavity, designed to spatially separate E and H fields of a pulsed microwave (2.45 GHz) input, we sampled at 100-ms intervals the 490-nm emission of bioluminescence from suspensions of the V. fischeri. E-field exposure (at 4.24 and 13.4 kV/m) results in rapid and sensitive responses to 100-ms pulses. H-field excitation elicits no measurable responses, even at 100-fold higher power input levels (equivalent to 183 A/m). The observed effects on bacterial light output partially correlate with measured E-field-induced temperature increases. In conclusion, the endogenous bioluminescence of V. fischeri provides a sensitive and noninvasive method to assess the biological effects of microwave fields.

Bioluminescence-mediated stimulation of photoreactivation in bacteria.

Although biochemistry and genetics of light emission by cells have been investigated in detail, a biological role for bacterial luminescence has remained obscure for a long time. It was proposed recently that luminescence may stimulate DNA repair, but the specific mechanism of this phenomenon was not investigated. Moreover, experiments showing decreased survival of UV-irradiated lux mutants relative to luminescent cells were performed previously using only one bacterial species, Vibrio harveyi. Here, we demonstrate that dark mutants of various strains of naturally luminescent bacteria (Photobacterium leiognathi, Photobacterium phosphoreum and Vibrio fischeri) are more sensitive to UV irradiation than wild-type cells. Thus, this phenomenon occurs not only in V. harveyi but also in other bacterial species. Using an artificial system of luminescent Escherichia coli in combination with phr mutants (defective in photolyase functions), we found that bacterial luminescence may stimulate photoreactivation, perhaps by providing photons that are necessary for photolyase activity.

Electrochemical oxidation of trace organic contaminants in reverse osmosis concentrate using RuO2/IrO2-coated titanium anodes.

During membrane treatment of secondary effluent from wastewater treatment plants, a reverse osmosis concentrate (ROC) containing trace organic contaminants is generated. As the latter are of concern, effective and economic treatment methods are required. Here, we investigated electrochemical oxidation of ROC using Ti/Ru(0.7)Ir(0.3)O(2) electrodes, focussing on the removal of dissolved organic carbon (DOC), specific ultra-violet absorbance at 254 nm (SUVA(254)), and 28 pharmaceuticals and pesticides frequently encountered in secondary treated effluents. The experiments were conducted in a continuously fed reactor at current densities (J) ranging from 1 to 250 A m(-2) anode, and a batch reactor at J = 250 A m(-2). Higher mineralization efficiency was observed during batch oxidation (e.g. 25.1 ± 2.7% DOC removal vs 0% removal in the continuous reactor after applying specific electrical charge, Q = 437.0 A h m(-3) ROC), indicating that DOC removal is depending on indirect oxidation by electrogenerated oxidants that accumulate in the bulk liquid. An initial increase and subsequent slow decrease in SUVA(254) during batch mode suggests the introduction of auxochrome substituents (e.g. -Cl, NH(2)Cl, -Br, and -OH) into the aromatic compounds. Contrarily, in the continuous reactor ring-cleaving oxidation products were generated, and SUVA(254) removal correlated with applied charge. Furthermore, 20 of the target pharmaceuticals and pesticides completely disappeared in both the continuous and batch experiments when applying J ≥ 150 A m(-2) (i.e. Q ≥ 461.5 A h m(-3)) and 437.0 A h m(-3) (J = 250 A m(-2)), respectively. Compounds that were more persistent during continuous oxidation were characterized by the presence of electrophilic groups on the aromatic ring (e.g. triclopyr) or by the absence of stronger nucleophilic substituents (e.g. ibuprofen). These pollutants were oxidized when applying higher specific electrical charge in batch mode (i.e. 1.45 kA h m(-3) ROC). However, baseline toxicity as determined by Vibrio fischeri bioluminescence inhibition tests (Microtox) was increasing with higher applied charge during batch and continuous oxidation, indicating the formation of toxic oxidation products, possibly chlorinated and brominated organic compounds.

Degradation of bromoxynil and trifluralin in natural water by direct photolysis and UV plus H(2)O(2) advanced oxidation process.

The degradation of two pesticides, bromoxynil and trifluralin, was investigated in ultrapure and natural water solutions under ultraviolet (UV) light and a combination of UV and hydrogen peroxide (H(2)O(2)). The effect of pH on the photooxidation of the pesticides was also studied. The results indicated that under direct photolysis with monochromatic light at 253.7 nm and different conditions, the photochemical rates followed first-order kinetics, with fluence-based rate constants ranging from 9.15 x 10(-4) to 6.37 x 10(-3) cm(2) mJ(-1) and 7.63 x 10(-3) to 1.47 x 10(-2) cm(2) mJ(-1) for bromoxynil and trifluralin, respectively. Quantum yields, in the range of 0.08-0.25 for bromoxynil and 0.12-0.72 for trifluralin, were observed in experiments using ultrapure water. The study also found that the UV/H(2)O(2) process enhanced the oxidation rate in comparison to direct photolysis. A 90% degradation with UV dose of 333 and 188 mJ cm(-2) was achieved for bromoxynil and trifluralin, respectively, in natural water, in presence of 8.8 x 10(-4) M H(2)O(2). To assess the aquatic toxicity, the Microtox 81.9% screening test protocol was used before and after treatment. The test results indicated a decrease in the acute toxicity of the samples after treatment for both pesticides.

Photolyase confers resistance to UV light but does not contribute to the symbiotic benefit of bioluminescence in Vibrio fischeri ES114.

Recent reports suggest that the selective advantage of bioluminescence for bacteria is mediated by light-dependent stimulation of photolyase to repair DNA lesions. Despite evidence for this model, photolyase mutants have not been characterized in a naturally bioluminescent bacterium, nor has this hypothesis been tested in bioluminescent bacteria under natural conditions. We have now characterized the photolyase encoded by phr in the bioluminescent bacterium Vibrio fischeri ES114. Consistent with Phr possessing photolyase activity, phr conferred light-dependent resistance to UV light. However, upon comparing ES114 to a phr mutant and a dark Delta luxCDABEG mutant, we found that bioluminescence did not detectably affect photolyase-mediated resistance to UV light. Addition of the light-stimulating autoinducer N-3-oxo-hexanoyl homoserine lactone appeared to increase UV resistance, but this was independent of photolyase or bioluminescence. Moreover, although bioluminescence confers an advantage for V. fischeri during colonization of its natural host, Euprymna scolopes, the phr mutant colonized this host to the same level as the wild type. Taken together, our results indicate that at least in V. fischeri strain ES114, the benefits of bioluminescence during symbiotic colonization are not mediated by photolyase, and although some UV resistance mechanism may be coregulated with bioluminescence, we found no evidence that light production benefits cells by stimulating photolyase in this strain.