ABSTRACT
The multifunctionality of an A3B mixed-substituted porphyrin, namely 5-(4-carboxyphenyl)-10,15,20-tris(4-methylphenyl)porphyrin (5-COOH-3MPP), was proven due to its capacity to detect procaine by different methods, depending on the polymer matrix in which it is incorporated. The hybrid nanomaterial containing k-carrageenan and AuNPs (5-COOH-3MPP-k-carrageenan-AuNPs) was able to optically detect procaine in the concentration range from 5.76 × 10-6 M to 2.75 × 10-7 M, with a limit of detection (LOD) of 1.33 × 10-7 M. This method for the detection of procaine gave complementary results to the potentiometric one, which uses 5-COOH-3MPP as an electroactive material incorporated in a polyvinylchloride (PVC) membrane plasticized with o-NPOE. The detected concentration range by this ion-selective membrane electrode is wider (enlarged in the field of higher concentrations from 10-2 to 10-6 M), linearly dependent with a 53.88 mV/decade slope, possesses a detection limit of 7 × 10-7 M, a response time of 60 s, and has a certified stability for a working period of six weeks.
Subject(s)
Metal Nanoparticles , Porphyrins , Procaine , Carrageenan , Gold , Ion-Selective ElectrodesABSTRACT
The high selectivity and fast ion response of all-solid sodium ion selective electrodes were widely applied in human sweat analysis. However, the potential drift due to insufficient interfacial capacitance leads to the deterioration of its stability and ultimately affects the potential accuracy of ion analysis. Designing a novel ion-electron transduction layer between the electrode and the ion selective membrane is an effective method to stabilize the interfacial potential. Herein, the SnS2-MoS2 heterojunction material was constructed by doping Sn in MoS2 nanosheets and used as the ion electron transduction layers of an all-solid sodium ion selective electrode for the first time, achieving the stable and efficient detection of Na+ ions. The proposed electrode exhibited a Nernst slope of 57.86 mV/dec for the detection of Na+ ions with a detection limit of 10-5.7 M in the activity range of 10-6-10-1 M. Via the electronic interaction at the heterojunction interfaces between SnS2 and MoS2 materials, the micro-nanostructure of the SnS2-MoS2 heterojunction was changed and SnS2-MoS2 as the ion-electron transduction layer acquired excellent capacitance (699 µF) and hydrophobicity (132°), resulting in a long-term potential stability of 1.37 µV/h. It was further proved that the large capacitance and high hydrophobicity of the ion-electron transduction layer are primary reasons for the excellent stability of the all-solid sodium ion selective electrode toward Na+ ions.
Subject(s)
Ion-Selective Electrodes , Molybdenum , Humans , Electrons , Electric Capacitance , IonsABSTRACT
Ion-selective electrodes (ISEs) have widespread use in the fields of clinical and environmental analyses. Tetrahydrofuran (THF) is the most used solvent for the preparation of modern ISEs, equipped with ion-selective membranes (ISMs). Until now, the influence of impurities in THF toward potentiometric instability of ion-selective membrane based ISEs was probably associated with the presence of either residual water or peroxide. To address this issue, most literature recommends redistilling THF prior to use in the preparation of the potentiometric membranes. Current study reveals that the actual THF impurity that is responsible for potential instability in the ISM includes products from the oxidation of THF, which contains the hydroxyl group and possibly carbonyl group with a boiling point of above 200 °C. The density functional theory calculation supported pathway of the chemical reaction of THF oxidation, hence, the chemical structure of the uncertain impurities was predicted. The underlying reason for the deteriorating potential stability of the ISEs is proposed as the significant hydrophilicity of these impurities that affect the partitioning of the ion sensing components in the membrane, thus enhancing the leaching of the membrane components from the membrane phase. This finding explains why redistillation of aged THF is advised.
Subject(s)
Furans , Furans/chemistry , Ion-Selective Electrodes , Oxidation-Reduction , Membranes, Artificial , Potentiometry , Density Functional TheoryABSTRACT
Fluoride (F-) export proteins, including F- channels and F- transporters, are widespread in biology. They contribute to cellular resistance against fluoride ion, which has relevance as an ancient xenobiotic, and in more modern contexts like organofluorine biosynthesis and degradation or dental medicine. This chapter summarizes quantitative methods to measure fluoride transport across membranes using fluoride-specific lanthanum-fluoride electrodes. Electrode-based measurements can be used to measure unitary fluoride transport rates by membrane proteins that have been purified and reconstituted into lipid vesicles, or to monitor fluoride efflux into living microbial cells. Thus, fluoride electrode-based measurements yield quantitative mechanistic insight into one of the major determinants of fluoride resistance in microorganisms, fungi, yeasts, and plants.
Subject(s)
Fluorides , Lanthanum , Fluorides/chemistry , Fluorides/metabolism , Lanthanum/chemistry , Lanthanum/metabolism , Electrodes , Biological Transport , Ion-Selective ElectrodesABSTRACT
BACKGROUND: Through the use of sustainable and green chemistry concepts, scientists need to decrease waste, conserve energy, and develop safe substitutes for hazardous compounds, all for protecting and benefiting society and the environment. OBJECTIVE: Four novel eco-friendly ion selective electrodes (ISE) were generated to determine Ethamsylate (ETM) in bulk powder and different pharmaceutical formulations. The present electrodes were fabricated to clearly distinguish ETM from a variety of inorganic, organic ions, sugars, some common drug excipients and the degradation product, hydroquinone (HQ) of ETM, and thus used for stability-indicating methods. METHODS: The electrodes fabrication was based on 2-nitrophenyl octyl ether (NPOE) that was employed as a plasticizer in electrodes 1, 2, and 3 within a polymeric matrix of polyvinyl chloride (PVC) except for electrode 4, in which dibutyl sebacate was used as a plasticizer. Electrodes 1 and 2 were fabricated using tetradodecylammonium bromide as an anionic exchanger, adding 4-sulfocalix-8-arene as an ionophore only to electrode 2 and preparing electrode 1 without incorporation of an ionophore. The fabrication of electrodes 3 and 4 was based on ethamsylate-tetraphenylborate (ETM-TPB) as an ion-association complex in a PVC matrix. The environmental sustainability was assessed using the green analytical procedure index (GAPI), and analytical greenness metric for sample preparation (AGREEprep). RESULTS: Electrodes 1 and 2 had linear dynamic ranges of 10-1-10-5 mol/L and 10-1-10-4 mol/L, respectively, with a Nernstian slope of 49.6 and 53.2 mV/decade, respectively. Electrodes 3 and 4 had linear dynamic ranges of 10-1-10-4 mol/L, with a Nernstian slope of 43.9 and 40.2 mV/decade, respectively. CONCLUSION: The electrodes' selectivity coefficients showed good selectivity for ETM. The utility of 4-sulfocalix-8-arene as an ionophore had a significant influence on increasing the membrane sensitivity and selectivity of electrode 2 compared to other electrodes. HIGHLIGHTS: Four novel eco-friendly ISEs were used for determination of ETM in bulk powder and different pharmaceutical formulations. Different experimental parameters were performed to optimize the determination conditions such as solvent mediators, dynamic response time, effect of pH, and temperature. Stability-indicating measurement of ETM in the presence of its degradate HQ and co-formulated drug tranexamic acid. Using new ecological assessment tools to determine whiteness and greenness profiles.
Subject(s)
Ion-Selective Electrodes , Potentiometry , Potentiometry/methods , Green Chemistry Technology/methods , Plasticizers/chemistry , Plasticizers/analysis , Drug Stability , Polyvinyl Chloride/chemistry , EthersABSTRACT
Apomorphine is a dopamine agonist that is used for the management of Parkinson's disease and has been proven to effectively decrease the off-time duration, where the symptoms recur, in Parkinson's disease patients. This paper describes the design and fabrication of the first potentiometric sensor for the determination of apomorphine in bulk and human plasma samples. The fabrication protocol involves stereolithographic 3D printing, which is a unique tool for the rapid fabrication of low-cost sensors. The solid-contact apomorphine ion-selective electrode combines a carbon-mesh/thermoplastic composite as the ion-to-electron transducer and a 3D printed ion-selective membrane, doped with the ionophore calix[6]arene. The sensor selectively measures apomorphine in the presence of other biologically present cations - sodium, potassium, magnesium, and calcium - as well as the commonly prescribed Parkinson's pharmaceutical, levodopa (L-Dopa). The sensor demonstrated a linear, Nernstian response, with a slope of 58.8 mV/decade over the range of 5.0 mM-9.8 µM, which covers the biologically (and pharmaceutically) relevant ranges, with a limit of detection of 2.51 µM. Moreover, the apomorphine sensor exhibited good stability (minimal drift of just 188 µV/hour over 10 h) and a shelf-life of almost 4 weeks. Experiments performed in the presence of albumin, the main plasma protein to which apomorphine binds, demonstrate that the sensor responds selectively to free-apomorphine (i.e., not bound or complexed forms). The utility of the sensor was confirmed through the successful determination of apomorphine in spiked human plasma samples.
Subject(s)
Biosensing Techniques , Parkinson Disease , Humans , Apomorphine , Parkinson Disease/drug therapy , Ion-Selective Electrodes , Pharmaceutical Preparations , PotentiometryABSTRACT
Monitoring extracellular calcium ion (Ca2+) chemical signals in neurons is crucial for tracking physiological and pathological changes associated with brain diseases in live animals. Potentiometry based solid-state ion-selective electrodes (ISEs) with the assist of functional carbon nanomaterials as ideal solid-contact layer could realize the potential response for in vitro and in vivo analysis. Herein, we employ a kind of biomass derived porous carbon as a transducing layer to prompt efficient ion to electron transduction while stabilizes the potential drift. The eco-friendly porous carbon after activation (APB) displays a high specific area with inherit macropores, micropores, and large specific capacitance. When employed as transducer in ISEs, a stable potential response, minimized potential drift can be obtained. Benefiting from these excellent properties, a solid-state Ca2+ selective carbon fiber electrodes (CFEs) with a sandwich structure is constructed and employed for real time sensing of Ca2+ under electrical stimulation. This study presents a new approach to develop sustainable and versatile transducers in solid-state ISEs, a crucial way for in vivo sensing.
Subject(s)
Calcium , Carbon , Nanostructures , Calcium/chemistry , Calcium/analysis , Carbon/chemistry , Nanostructures/chemistry , Ion-Selective Electrodes , Animals , Porosity , Transducers , Electrochemical Techniques/instrumentationABSTRACT
Electrochemical sensors provide an affordable and reliable approach towards the detection and monitoring of important biological species ranging from simple ions to complex biomolecules. The ability to miniaturize electrochemical sensors, coupled with their affordability and simple equipment requirements for signal readout, permits the use of these sensors at the point-of-care where analysis using non-invasively obtainable biofluids is receiving growing interest by the research community. This paper describes the design, fabrication, and integration of a 3D printed Mg2+ potentiometric sensor into a 3D printed microfluidic device for the quantification of Mg2+ in low-sample volume biological fluids. The sensor employs a functionalized 3D printable photocurable methacrylate-based ion-selective membrane affixed to a carbon-mesh/epoxy solid-contact transducer for the selective determination of Mg2+ in sweat, saliva and urine. The 3D printed Mg2+ ion-selective electrode (3Dp-Mg2+-ISE) provided a Nernstian response of 27.5 mV per decade with a linear range of 10 mM to 39 µM, covering the normal physiological and clinically relevant levels of Mg2+ in biofluids. 3Dp-Mg2+-ISEs selectively measure Mg2+ over other biologically present cations - sodium, potassium, calcium, ammonium - as well as provide high stability in the analytical signal with a drift of just 13 µV h-1 over 10 hours. Comparison with poly(vinylchloride)-based Mg2+-ISEs showed distinct advantages to the use of 3Dp-Mg2+-ISEs, with respect to stability, resilience towards biofouling and importantly providing a streamlined and rapid approach towards mass production of selective and reliable sensors. The miniaturization capabilities of 3D printing coupled with the benefits of microfluidic analysis (i.e., low sample volumes, minimal reagent consumption, automation of multiple assays, etc.), provides exciting opportunities for the realization of the next-generation of point-of-care diagnostic devices.
Subject(s)
Lab-On-A-Chip Devices , Magnesium , Printing, Three-Dimensional , Magnesium/chemistry , Humans , Potentiometry/instrumentation , Equipment Design , Microfluidic Analytical Techniques/instrumentation , Ion-Selective Electrodes , Saliva/chemistryABSTRACT
BACKGROUND: The local pH change mediated by the pathogenic bacterial species Streptococcus mutans plays a significant role in the corrosion of hydroxyapatite (HA) present in the tooth in the dynamic oral cavity. The acid produced by the bacteria decreases the local pH and releases Ca2+ ions from the HA. We studied the bacteria-mediated demineralization of HA by scanning electrochemical microscopy (SECM) after growing S. mutans biofilm on HA for 7 days. RESULTS: We notably developed a triple-function SECM-compatible tip that could be positioned above the biofilm. It can also measure the pH and [Ca2+] change simultaneously above the biofilm-HA substrate. The triple-function SECM tip is a combination of a potentiometric pH sensor deposited with iridium oxide and a dual-function carbon-based Ca2+ ion-selective membrane electrode with a slope of 67 mV/pH and 34.3 mV/log [Ca2+], respectively. The distance-controlled triple-function SECM tip monitored real-time pH and [Ca2+] changes 30 µm above the S. mutans biofilm. The high temporal resolution pH data demonstrated that after approximately 20 min of sucrose addition, S. mutans started to produce acid to titrate the solution buffer, causing a pH change from 7.2 to 6.5 for HA and from 7.2 to 5 for the glass substrate. We observed that, after 30 min of acid production, â¼300 µM of Ca2+ ions were increased at pH 6.5 above the biofilm surface as a result of the pH change in the local microenvironment. After the release of Ca2+ from HA, the pH environment again shifted toward the neutral side, from 6.5 to 7.2. Therefore, precipitation of Ca2+ happens at the top of the biofilm, thus corroding the HA from underneath. For a glass substrate, in contrast, no Ca2+ ions were released, and the pH did not change back to 7.2. We were able to observe the dynamics of the HA demineralization-remineralization process simultaneously with our newly developed triple-function SECM tip or microprobe. SIGNIFICANCE: This technique could notably advance the study of similar complex processes, such as bacteria-mediated corrosion in biomedical and environmental contexts.
Subject(s)
Biofilms , Calcium , Carbon , Durapatite , Microelectrodes , Streptococcus mutans , Streptococcus mutans/metabolism , Hydrogen-Ion Concentration , Durapatite/chemistry , Calcium/chemistry , Calcium/metabolism , Carbon/chemistry , Corrosion , Ion-Selective ElectrodesABSTRACT
PURPOSE: The purpose of the study was to determine the fluoride (F) and silver (Ag) ions levels in the saliva and urine of healthy children after silver diamine fluoride (SDF) application on dental carious lesions. METHODS: Sixty children (4-6 years with ≥ 3 caries lesions) were recruited from the outpatient department of Pediatric Dentistry. From each child, 3 ml unstimulated saliva samples were collected at baseline, one hour, and 24 h after SDF application. Similarly, 3 ml urine samples were collected prior to and after 24 h of SDF application. F and Ag ion concentrations were determined by fluoride ion-selective electrode (ISE) and inductively coupled plasma mass spectrometry (ICPMS), respectively. RESULTS: The mean ± standard deviation (SD) baseline, 1-h, and 24-h salivary F concentrations (ppm) were 0.07 ± 0.07, 0.93 ± 0.48, and 0.19 ± 0.19, respectively, while the mean baseline and 24-h urinary F concentrations (ppm) were 0.33 ± 0.20 ppm and 0.43 ± 0.25 ppm, respectively. The mean baseline, 1-h, and 24-h salivary Ag concentrations (ppb) were 4.22 ± 3.15, 4198 ± 350, and 56.93 ± 37, respectively. The mean baseline and 24-h urinary Ag concentrations (ppb) were 2.80 ± 2.93 ppb and 4.72 ± 4.0 ppb, respectively. There were statistically elevated F and Ag ion concentrations at 1 h and 24 h after SDF application as compared to the baseline. CONCLUSION: Salivary and urinary F and Ag ions concentrations elevated significantly at 24 h following SDF applications in children. A significant high recovery of these ions in urine indicates minimal systemic absorption, thus intermittent topical application of 38% SDF has a minimal risk of toxicity.
Subject(s)
Fluorides, Topical , Fluorides , Quaternary Ammonium Compounds , Saliva , Silver Compounds , Silver , Humans , Saliva/chemistry , Fluorides, Topical/administration & dosage , Child , Child, Preschool , Prospective Studies , Female , Male , Fluorides/analysis , Fluorides/urine , Quaternary Ammonium Compounds/analysis , Quaternary Ammonium Compounds/administration & dosage , Dental Caries , Cariostatic Agents/analysis , Cariostatic Agents/administration & dosage , Ion-Selective ElectrodesABSTRACT
OBJECTIVE: To assess the fluoride and silver ion release of glass ionomer cement (GIC) restorations, including conventional GIC (CGIC) and resin-modified GIC (RMGIC) restorations, with 38 % silver diamine fluoride (SDF) solution dentin pretreatment. METHODS: Eighty dentin blocks were allocated into 4 groups and restored with SDF+CGIC, CGIC, SDF+RMGIC and RMGIC, respectively. Each block was stored in deionized water at 37 °C for 2 years. Fluoride and silver ion concentration in storage solution was measured using ion-selective electrode and inductively coupled plasma-optical emission spectrometry for up to 2 years. The cross-sectional surfaces of restored dentin blocks were assessed by X-Ray diffraction analysis (XRD), scanning electron microscope (SEM) with energy-dispersive X-ray spectroscopy (EDS) after 1 week and 2 years, respectively. RESULTS: The mean ± standard deviation (SD) of accumulative fluoride releasing in SDF+CGIC, CGIC, SDF+RMGIC and RMGIC for 2 years were 0.13±0.005 mg, 0.09±0.006 mg, 0.15±0.008 mg and 0.05±0.003 mg, respectively (Groups SDF+RMGIC > SDF+CGIC > CGIC >RMGIC, p < 0.05). The mean ± SD of accumulative silver releasing in SDF+CGIC, CGIC, SDF+RMGIC and RMGIC for 2 years were 0.03±0.009 mg, 0.00±0.00 mg, 0.01±0.003 mg, and 0.00±0.00 mg, respectively (Groups SDF+CGIC > SDF+RMGIC > CGIC&RMGIC, p < 0.05). Groups SDF+CGIC and SDF+RMGIC showed sustainably higher fluoride and silver releasing compared to Groups CGIC and RMGIC (p < 0.05). XRD analysis indicated the fluorapatite and silver chloride were observed only in Groups SDF+CGIC and SDF+RMGIC, but not in Groups CGIC and RMGIC. SEM images of the cross-sectional view of the dentin blocks showed silver crystals within dentinal tubules 1 week and 2-year in Groups with SDF pretreatment. CONCLUSION: The 38 % SDF dentin pretreatment sustainably increased the fluoride and silver release of GIC and RMGIC restorations for up to 2 years.
Subject(s)
Dentin , Fluorides, Topical , Fluorides , Glass Ionomer Cements , Microscopy, Electron, Scanning , Quaternary Ammonium Compounds , Silver Compounds , Silver , Spectrometry, X-Ray Emission , X-Ray Diffraction , Silver Compounds/chemistry , Quaternary Ammonium Compounds/chemistry , Glass Ionomer Cements/chemistry , Dentin/chemistry , Dentin/drug effects , Fluorides/chemistry , Fluorides, Topical/chemistry , Humans , Silver/chemistry , Cariostatic Agents/chemistry , Materials Testing , Dental Restoration, Permanent/methods , Ion-Selective Electrodes , Resin Cements/chemistry , Surface PropertiesABSTRACT
Abstract Objective: To compare the fluoride release from Conventional Glass Ionomer Cement (GIC), Resin Modified GIC (RMGIC), and Cention N Alkasite Material. Material and Methods: Forty- five disc-shaped specimens of three different restorative materials (Conventional GIC, RMGIC, and Alkasite material) were made and divided into 3 groups (n=15). Fluoride release was evaluated at the end of Day 1, 7, 14, and Day 28 using fluoride ion-selective electrode. Intergroup and Intra-group analysis was done using One-way ANOVA with a Post-hoc test. A p-value of <0.05 was considered statistically significant. Results: Cention showed more fluoride release (in parts per million) than GIC and RMGIC at increased time duration. However, at the end of day 1, there was lesser fluoride release with Cention, as compared with the other groups. Conclusion: The new Alkasite restorative material showed promising results in terms of fluoride release and is better than GIC and RMGIC at increased time duration.
Subject(s)
In Vitro Techniques/methods , Ion-Selective Electrodes , Fluorides/chemistry , Glass Ionomer Cements , Materials Testing/instrumentationABSTRACT
Aim: To determine total fluoride (TF) concentration in Na2FPO3/Ca-based toothpastes, using fluoride ion selective electrode (F-ISE) by the direct technique, it is necessary to use acid (Ac+) to hydrolyze the FPO32- ion and to dissolve insoluble fluoride salts bound to the abrasive. For NaF/silica-based toothpastes, the use of acid is not necessary (Ac-) and a simplified protocol could be followed. Methods: Thus, we evaluated TF concentration in seven brands of NaF/silica-based toothpastes, following the validated conventional Cury's protocol (Ac+) or a simplification of this protocol (Ac-).Fluoride was analyzed with ISE calibrated with fluoride standard solutions prepared in the same conditions as the samples (Ac+ or Ac-). Results: The mean (±SD; n=21) of TF concentrations (µg F/g) found by Ac+ (971.3±191.2) and Ac- (982.4±201.3) protocols were not statistically different (t test, p=0.22). The TF concentrations found agree with those declared by the manufacturers, except for one toothpaste imported from China. Conclusion: The findings suggest that the determination of fluoride in NaF/silica-based toothpastes can be accurately made using a simplified protocol of analysis
Subject(s)
Silicic Acid , Toothpastes , Ion-Selective Electrodes , Dentifrices , FluoridesABSTRACT
Introducción: Actualmente, existe una gran variedad de pastas dentales que se pueden encontrar en el mercado nacional, para diferentes propósitos. Entre éstas se hallan las empleadas para la prevención de caries. Éstas contienen fluoruro en diversas concentraciones como agente terapéutico, y casi en su totalidad estipulan en sus marbetes un contenido de 1,000 a 1,450 partes por millón (ppm) de fluoruro. Algunos estudios han mostrado que las concentraciones de fluoruro especificadas en la etiqueta y lo encontrado en el dentífrico no coinciden. Objetivo: Evaluar la concentración de fluoruro total con base en la Norma Mexicana NMX-K-539-CNCP-2013, que establece que los dentífricos no deben contener más de 1,500 ppm de fluoruro. Así como determinar si lo declarado en el marbete de sus empaques corresponde al contenido real de fluoruro. Material y métodos: El estudio se realizó, por triplicado, en 37 pastas dentífricas. El método para determinar la concentración de fluoruro fue el de ion selectivo, descrito por la Farmacopea de los Estados Unidos Mexicanos. Resultados: El promedio de concentración de este elemento fue de 1,262 ppm F- (± 170.7). El 59% de los dentífricos analizados no contienen la cantidad estipulada en el marbete. Conclusiones: Las concentraciones de fluoruro de los dentífricos se encuentran dentro de la Norma. Las concentraciones no corresponden a lo estipulado en el empaque (AU)
Introduction: Currently, there is a wide variety of toothpastes, which can be found in the national market, for different purposes. Among these are those used for the prevention of dental caries. These, contain fluoride in various concentrations as a therapeutic agent, and almost in their entirety, stipulate in their labels a content of 1,000 to 1,450 ppm of fluoride. Some studies have shown that the fluoride concentrations specified on the label, and what is found in the toothpaste do not match. Objective: To evaluate the concentration of total fluoride based on the Mexican Standard NMX-K-539-CNCP-2013, which establishes that toothpastes should not contain more than 1,500 ppm of fluoride. As well as determining if what is stated on the label of their packaging corresponds to the actual content of fluoride. Material and methods: The study was carried out, in triplicate, on 37 toothpastes. The method for determining the fluoride concentration was that of selective ion, described by the Pharmacopoeia of the United Mexican States. Results: The average concentration of this element was 1,262 ppm F- (± 170.7). Fifty nine percent of the dentifrices analyzed do not contain the amount stipulated in the label. Conclusions: The fluoride concentrations of dentifrices are within the Standard. The concentrations do not correspond to what is stipulated in the package (AU)
Subject(s)
Dentifrices/analysis , Fluorides/pharmacology , Epidemiology, Descriptive , Cross-Sectional Studies , Ion-Selective Electrodes , Dental Caries/prevention & control , Observational Study , MexicoABSTRACT
Objetivo: avaliar o nível de flúor presente nas águas minerais carbogasosas e não carbogasosas envasadas no estado do Rio Grande do Sul, comparando os dados com as informações descritas nos rótulos das embalagens. Materiais e método: foram analisadas cinco marcas comerciais de água mineral. Os valores de padrão/ amostra e tampão Tisab foram utilizados em uma relação de 1:1, e as amostras foram lidas em duplicata. As amostras carbogasosas foram agitadas com bastão magnético para eliminação do gás carbônico. Para determinação de flúor, foram utilizados analisador específico de íons, eletrodo seletivo para íon flúor, eletrodo de referência Ag/AgCl de junção simples. Resultados: foram encontradas concentrações de flúor variando entre 0,13 mg F-/L e 1,31 mg F-/L, com diferenças entre os valores estipulados nos rótulos das marcas de água mineral avaliadas e as análises laboratoriais na presente investigação. Os valores de duas marcas de água mineral com flúor analisadas no estudo mostraram-se acima, considerando os valores de referência (0,6-0,8 mg F-/L), e uma marca não apresentou valores de ação preventiva contra a cárie dentária (valores abaixo de 0,6 mg F-/ L). Conclusão: conclui-se que há divergência entre os valores de íons flúor encontrados nas medições e os informados nos rótulos, sendo necessário um sistema de melhor vigilância para o controle dos níveis de flúor nas águas minerais disponibilizadas à população do estado do Rio Grande do Sul, considerando os benefícios do consumo de águas minerais para prevenção dos níveis de cárie na população. (AU)
Objective: quantify the fluoride level in carbogaseous and non-carbogaseous mineral waters bottled in the state of Rio Grande do Sul, Brazil, as well as to compare the data with the information described on the package labels. Materials and method: five brands of mineral water were analyzed. Standard/sample values and Tisab buffer were used in a ratio of 1:1, and the samples were read in duplicates. The carbogaseous samples were shaken with a magnetic rod to eliminate the carbon dioxide. For fluoride determination, a specific ion analyzer was used, as well as a fluoride ion-selective electrode, single-junction Ag/AgCl reference electrode. Results: fluoride concentrations ranging from 0.13 mg F-/L to 1.31 mg F-/L were found, with differences between the values specified in the labels of the mineral water brands evaluated and the laboratory analyses of the present investigation. The values of two brands of mineral water with fluoride analyzed in the study were high, considering the reference values (0.6-0.8 mg F-/L), and one brand did not present values of preventive action against dental caries (below 0.6 mg F-/L). Conclusion: there is a divergence between the values of fluoride ions measured and those reported on the labels, which requires a better surveillance system for controlling fluoride levels in the mineral waters offered to the population of the state of Rio Grande do Sul, Brazil, considering the benefits of mineral water consumption to prevent caries levels in the population. (AU)
Subject(s)
Fluorine/analysis , Fluorine/chemistry , Ions/analysis , Mineral Waters , Reference Values , Brazil , Ion-Selective Electrodes , Dental Caries/prevention & controlABSTRACT
According to the Peruvian legislation, salt for human consumption should contain 200-250 mg F/kg, but there is limited data showing whether this requirement is being accomplished. Aim: In this pilot study, we evaluated the fluoride concentration in samples of salt marketed in Lima, Peru, using a standardized protocol with ion-specific electrode by direct method (ISE). Methods: Seven 1 kg salt packages of four brands were purchased in two supermarkets of Lima. Six aliquots of each package were weighed and dissolved in the proportion of 0.025 g/mL of water. Duplicates of 1.0 mL of these solutions were mixed with 1.0 mL of TISAB II and fluoride concentration was determined with ISE calibrated with standards fluoride solutions ranging from 0.25 to 16.0 µg F/mL. The ionic strength of the standards was adjusted with p.a NaCL (25 mg/mL). In addition, triplicates of 15 g of each salt package were fractionated in a set of sieves (0.590 to 0.177 mm) to determine the homogeneity of fluoride concentration in salt. Results: In four packages the mean fluoride (mean±SD,n=6) concentration (mg F/kg) was in agreement to the Peruvian regulation (214.5±10.4; 221.8±14.3; 226.9±19.1 and 237.2±52.0 mg F/kg), but in 3 packages it was lower (145.2±7.9; 145.7±23.3 and 158.4±20.6 mg F/kg). Variability in fluoride concentration was observed within the same brand and among brands. Also, the fluoride concentration was not homogeneous in none of the salt samples, ranging from 72.0 to 1449.7 mg F/kg. Conclusion: The findings suggest that the manufacturing and sanitary surveillance of fluoridated salt in Peru should be improved
Subject(s)
Fluoridation , Ion-Selective Electrodes , Dental CariesABSTRACT
Este trabalho descreve o desenvolvimento e validação de metodologia analítica para determinar a concentração de fluoreto em água empregada para a preparação de soluções de diálise, por meio de potenciometria com eletrodo íon seletivo. Os parâmetros de validação investigados foram: seletividade, homoscedasticidade, linearidade, limite de detecção, limite de quantificação, veracidade de medição e precisão. As condições otimizadas de análise foram: tampão HOAc/-OAc/NaCl/CDTA (pH = 5,0 ± 0,1), na proporção 10:1 (amostra/tampão); concentrações das soluções-padrão da curva analítica: 0,05 a 0,80 mg/L. O método avaliado exibiu parâmetros de validação adequados com limites de detecção e de quantificação, respectivamente, de 0,020 e 0,050 mg/L. Ademais, foi também desenvolvida e validada uma planilha eletrônica para efetuar o monitoramento da qualidade da curva analítica do método que calcula o limite de decisão para 0,20 mg/L...
Subject(s)
Water Microbiology , Ion-Selective Electrodes , Fluorides , Potentiometry , Dialysis Solutions , IonsABSTRACT
Background: Bottled water consumption has currently increased and their fluoride (F) concentration may not be ideal in terms of caries benefit or risk of fluorosis. While low concentrations would have little anticaries effect, high F concentration would increase the risk of dental fluorosis. Aim: To measure F concentration in bottled waters sold in Chile. Material and Methods: Thirty bottles of water were purchased (15 sold as mineral water, six sold as purified water and nine as favored water). Samples were analyzed in duplicate with a previously calibrated ion-specific electrode. Mean F concentration of each product was calculated and expressed as ppm F (mg F/L). Results: A mean (± SD) concentration of 0.39 ± 0.42, 0.02 ± 0.006 and 0.11 ± 0.18 ppm F for mineral, purified and favored waters respectively, was found. Three samples were within the optimal F concentration recommended for drinking water in Chile, which ranges from 0.6 to 1.0 ppm F. Two were above such concentration and the others below. Only two waters displayed F concentration information in the label, which was corroborated by the analysis. Conclusions: Only 10% of the bottled waters commercialized in Chile have potential to prevent caries. The F concentration in most of them does not represent an increased risk of fluorosis.
Subject(s)
Humans , Drinking Water/chemistry , Fluorides/analysis , Mineral Waters/analysis , Chile , Dental Care , Fluorosis, Dental , Ion-Selective ElectrodesABSTRACT
The objective of this study was to estimate the intake of toothpaste fluoride used by children aged 2 to 6 years (n=87) treated at a hospital of a medium-sized city (Campina Grande, PB) in the Northeastern region of Brazil. Data regarding sociodemographic characteristics of families and children's toothbrushing were collected from questionnaire-based interviews with parents/guardians, and the amount of fluoride used during toothbrushing was estimated using a precision scale for assessment of the risk of dental fluorosis, considering a cutoff value of 0.07 mgF/kg body weight/day. Fluoride content in the toothpastes was analyzed using a specific fluoride electrode. Data were analyzed using descriptive and inferential statistics using the chi-square and Fisher's exact tests (α=0.05). Considering the use of the derice, the risk of fluorosis in the children was 19.5%. There was significant association (p<0.05) between the risk of fluorosis, brushing frequency, type of derice and who performed the child's oral hygiene. It was concluded that a high percentage of children in the studied sample used toothpaste inappropriately and were at risk of developing dental fluorosis.
Resumo O objetivo do presente trabalho foi estimar a ingestão de flúor de derícios utilizados por crianças de 2 a 6 anos de idade (n=87) atendidas em um hospital de médio porte (Campina Grande, PB) na região nordeste do Brasil. Os dados envolveram características sócio-demográficas e escovação dentária das crianças através de uma entrevista com formulário específico, aplicado aos pais/responsáveis, e a quantidade de flúor utilizada na escovação da criança, por meio de balança de precisão, para avaliação do risco de fluorose dentária, considerando o ponto de corte 0,07 mgF/kg peso corporal/dia. O conteúdo de flúor nos cremes dentais foi analisado utilizando eletrodo específico. Os dados foram trabalhados sob a forma de estatística descritiva e inferencial usando o testes do Qui-quadrado de Pearson e Exato de Fisher (α= 0,05). Levando-se em consideração o uso do derício, o risco de fluorose das crianças pesquisadas foi 19,5%. Houve associação significativa entre o risco de fluorose, a frequência de escovação, o tipo de derício e quem realiza a higiene bucal da criança (p<0,05). Concluiu-se que elevada parcela das crianças usavam o derício de forma inadequada e apresentaram risco de fluorose. .
Subject(s)
Adolescent , Adult , Child , Child, Preschool , Female , Humans , Male , Young Adult , Cariostatic Agents/administration & dosage , Fluorides/administration & dosage , Toothpastes/administration & dosage , Beverages , Body Weight , Cross-Sectional Studies , Cariostatic Agents/analysis , Educational Status , Fluorides/analysis , Fluorosis, Dental/etiology , Income , Ion-Selective Electrodes , Marital Status , Oral Hygiene/methods , Parents , Risk Factors , Toothbrushing/instrumentation , Toothbrushing/methods , Toothpastes/analysis , Water SupplyABSTRACT
To be relevant in terms of public health, widely-used toothpastes should have at least 1,000 ppm of soluble fluoride (F) concentration. Thus, the concentrations of total fluoride (TF) and total soluble fluoride (TSF) in the top-selling Brazilian toothpastes were evaluated. Samples (n=3) from toothpastes Colgate Anti-cáries®, Colgate Total 12 Clean Mint®, Colgate Tripla Ação Menta Original®, Colgate Tripla Ação Menta Suave® and Sorriso Dentes Brancos® were obtained from each of the five regions of the country. The concentrations of TF and TSF were analyzed with ion-specific electrode calibrated with F standards and the results were expressed in ppm (µg F/g). All toothpastes showed TF concentration lower than 1,500 ppm F (1,388.2 ± 25.8 to 1,483.2 ± 98.2). The TSF values were higher than 1,000 ppm F and ranged from 1,035.5 ± 61.5 to 1,221.8 ± 35.2 for calcium carbonate/monofluorophosphate-based toothpastes and from 1,455.6 ± 12.5 to 1,543.0 ± 147.3 for silica/sodium fluoride-based toothpaste. Top-selling Brazilian toothpastes presented available fluoride concentration to control caries regardless of the region where they are purchased.
Para ter relevância em termos de saúde pública, os cremes dentais amplamente utilizados pela população devem ter fluoreto (F) solúvel numa concentração mínima de 1.000 ppm F. Assim, as concentrações de fluoreto total (FT) e flureto solúvel total (FST) nos cremes dentais mais vendidos no Brasil foram avaliados. Os cremes dentais (n=3) Colgate Anti-cáries®, Colgate Total 12 Clean Mint®, Colgate Tripla Ação Menta Original®, Colgate Tripla Ação Menta Suave® e Sorriso Dentes Brancos® foram obtidos nas cinco regiões do país. As concentrações de FT e FST foram analisadas com eletrodo íon-específico calibrado com padrões de F e os resultados foram expressos em ppm (µg F/g). Todos os cremes dentais apresentaram concentração de FT inferior a 1.500 ppm F (1.388,2 ± 25,8 a 1.483,2 ± 98,2). Os valores de FST foram superiores a 1.000 ppm F e variaram de 1.035,5 ± 61,5 a 1.221,8 ± 35,2 para cremes dentais a base de carbonato de cálcio/monofluorfosfato e de 1.455,6 ± 12,5 a 1.543,0 ± 147,3 para o creme dental à base de sílica/fluoreto de sódio. Os cremes dentais mais vendidos no Brasil apresentaram concentração de fluoreto solúvel para controlar cárie, independentemente da região onde foram comprados.