Semi-rational design of nitroarene dioxygenase for catalytic ability toward 2,4-dichloronitrobenzene.

Rieske non-heme dioxygenase family enzymes play an important role in the aerobic biodegradation of nitroaromatic pollutants, but no active dioxygenases are available in nature for initial reactions in the degradation of many refractory pollutants like 2,4-dichloronitrobenzene (24DCNB). Here, we report the engineering of hotspots in 2,3-dichloronitrobenzene dioxygenase from Diaphorobacter sp. strain JS3051, achieved through molecular dynamic simulation analysis and site-directed mutagenesis, with the aim of enhancing its catalytic activity toward 24DCNB. The computationally predicted activity scores were largely consistent with the detected activities in wet experiments. Among them, the two most beneficial mutations (E204M and M248I) were obtained, and the combined mutant reached up to a 62-fold increase in activity toward 24DCNB, generating a single product, 3,5-dichlorocatechol, which is a naturally occurring compound. In silico analysis confirmed that residue 204 affected the substrate preference for meta-substituted nitroarenes, while residue 248 may influence substrate preference by interaction with residue 295. Overall, this study provides a framework for manipulating nitroarene dioxygenases using computational methods to address various nitroarene contamination problems.IMPORTANCEAs a result of human activities, various nitroaromatic pollutants continue to enter the biosphere with poor degradability, and dioxygenation is an important kickoff step to remove toxic nitro-groups and convert them into degradable products. The biodegradation of many nitroarenes has been reported over the decades; however, many others still lack corresponding enzymes to initiate their degradation. Although rieske non-heme dioxygenase family enzymes play extraordinarily important roles in the aerobic biodegradation of various nitroaromatic pollutants, prediction of their substrate specificity is difficult. This work greatly improved the catalytic activity of dioxygenase against 2,4-dichloronitrobenzene by computer-aided semi-rational design, paving a new way for the evolution strategy of nitroarene dioxygenase. This study highlights the potential for using enzyme structure-function information with computational pre-screening methods to rapidly tailor the catalytic functions of enzymes toward poorly biodegradable contaminants.

Integrative study of pulmonary microbiome, transcriptome and clinical outcomes in Mycoplasma pneumoniae pneumonia.

BACKGROUND: This study aimed to investigate the interactions among three core elements of respiratory infection-pathogen, lung microbiome, and host response-and their avocation with the severity and outcomes of Mycoplasma pneumoniae pneumonia (MPP) in children. METHODS: We prospectively collected bronchoalveolar lavage fluid from a cohort of 41 children with MPP, including general MPP (GMPP) and complicated MPP (CMPP), followed by microbiome and transcriptomic analyses to characterize the association among pathogen, lung microbiome, and host response and correlate it with the clinical features and outcomes. RESULTS: The lung microbiome of patients with CMPP had an increased relative abundance of Mycoplasma pneumoniae (MP) and reduced alpha diversity, with 76 differentially expressed species. Host gene analysis revealed a key module associated with neutrophil function and several inflammatory response pathways. Patients with a high relative abundance of MP, manifested by a specific lung microbiome and host response type, were more prone to CMPP and had a long imaging recovery time. CONCLUSION: Patients with CMPP have a more disrupted lung microbiome than those with GMPP. MP, lung microbiome, and host response interacts with each other and are closely related to disease severity and outcomes in children with MPP.

Percutaneous biopsy for the diagnosis, risk stratification, and molecular profiling of neuroblastoma: A single-center retrospective study.

PURPOSE: To determine whether percutaneous core needle biopsy (PCNB) is adequate for the diagnosis and full molecular characterization of newly diagnosed neuroblastoma. MATERIALS AND METHODS: Patients with newly diagnosed neuroblastoma who underwent PCNB in interventional radiology at a single center over a 5-year period were included. Pre-procedure imaging and procedure details were reviewed. Rates of diagnostic success and sufficiency for International Neuroblastoma Pathology Classification (INPC), risk stratification, and evaluation of genomic markers utilized in the Children's Oncology Group risk stratification, and status of the anaplastic lymphoma kinase (ALK) gene were assessed. RESULTS: Thirty-five patients (13 females, median age 2.4 years [interquartile range, IQR: 0.9-4.4] and median weight 12.4 kg [IQR: 9.6-18]) were included. Most had International Neuroblastoma Risk Group Stage M disease (n = 22, 63%). Median longest axis of tumor target was 8.8 cm [IQR: 6.1-12]. A 16-gauge biopsy instrument was most often used (n = 20, 57%), with a median of 20 cores [IQR: 13-23] obtained. Twenty-five specimens were assessed for adequacy, and 14 procedures utilized contrast-enhanced ultrasound guidance. There were two post-procedure bleeds (5.7%). Thirty-four of 35 procedures (97%) were sufficient for histopathologic diagnosis and risk stratification, 94% (n = 32) were sufficient for INPC, and 85% (n = 29) were sufficient for complete molecular characterization, including ALK testing. Biologic information was otherwise obtained from bone marrow (4/34, 12%) or surgery (1/34, 2.9%). The number of cores did not differ between patients with sufficient versus insufficient biopsies. CONCLUSION: In this study, obtaining multiple cores with PCNB resulted in a high rate of diagnosis and successful molecular profiling for neuroblastoma.

A sequencing electroreduction-electrooxidation system driven by atomic hydrogen for enhancing 2,4-dichloronitrobenzene removal from wastewater.

The sequencing electroreduction-electrooxidation process has emerged as a promising approach for the degradation of the chloronitrobenzenes (CNBs) due to its elimination of electro-withdrawing groups in the reduction process, facilitating further removal in the subsequent oxidation process. Herein, we developed a cathode consisting of atom Pd on a Ti plate, which enabled the electro-generation of atomic hydrogen (H*) and the efficient electrocatalytic activation of H2O2 to hydroxyl radical (•OH). Cyclic voltammetry (CV) curves and electron spin resonance (ESR) spectra verified the existence of H* and •OH. The electroreduction-electrooxidation system achieved 94.7% of 20 mg L-1 2,4-DCNB removal with a relatively low H2O2 addition (5 mM). Moreover, the inhibition rate of Photobacterium phosphoreum in the effluent decreased from 95% to 52% after the sequencing electroreduction-electrooxidation processes. It was further revealed that the H* dominated the electroreduction process and triggered the electrooxidation process. Our work sheds light on the effective removal of electron-withdrawing groups substituted aromatic contaminants from water and wastewater.

Predicting subsolid pulmonary nodules before percutaneous needle biopsy: a comparison of artificial neural network and biopsy results.

AIM: To establish an artificial neural network (ANN) model to predict subsolid nodules (SSNs) before percutaneous core-needle biopsy (PCNB). The results of the two methods were compared to provide guidance on the treatment of SSNs. MATERIALS AND METHODS: This was a single-centre retrospective study using data from 1,459 SSNs between 2013 and 2021. The ANN was developed using data from patients who underwent surgery following computed tomography (CT) (SFC) and validated using data from patients who underwent surgery following biopsy (SFB). The prediction results of the ANN for the PCNB group and the histopathological results obtained after biopsy were compared with the histopathological results of lung nodules in the same group after surgery. Additionally, the choice of predictors for PCNB was analysed using multivariate analysis. RESULTS: There was no significant difference between the accuracies of the ANN and PCNB in the SFB group (p=0.086). The sensitivity of PCNB was lower than that of the ANN (p=0.000), but the specificity was higher (p=0.001). PCNB had better diagnostic ability than the ANN. The incidence of precursor lesions and non-neoplastic lesions in the SFB group was lower than that in the SFC group (p=0.000). A history of malignant tumours, size (2-3 cm), volume (>400 cm3) and mean CT value (≥-450 HU) are important factors for selecting PCNB. CONCLUSIONS: Both ANN and PCNB have comparable accuracy in diagnosing SSNs; however, PCNB has a slightly higher diagnostic ability than ANN. Selecting appropriate patients for PCNB is important for maximising the benefit to SSN patients.

In vitro evaluation of the selective cytotoxicity and genotoxicity of three synthetic ortho-nitrobenzyl derivatives in human cancer cell lines, with and without metabolic activation.

Although the presence of nitro groups in chemicals can be recognized as structural alerts for mutagenicity and carcinogenicity, nitroaromatic compounds have attracted considerable interest as a class of agents that can serve as source of potential new anticancer agents. In the present study, the in vitro cytotoxicity, genotoxicity, and mutagenicity of three synthetic ortho-nitrobenzyl derivatives (named ON-1, ON-2 and ON-3) were evaluated by employing human breast and ovarian cancer cell lines. A series of biological assays was carried out with and without metabolic activation. Complementarily, computational predictions of the pharmacokinetic properties and druglikeness of the compounds were performed in the Swiss ADME platform. The MTT assay showed that the compounds selectively affected selectively the cell viability of cancer cells in comparison with a nontumoral cell line. Additionally, the metabolic activation enhanced cytotoxicity, and the compounds affected cell survival, as demonstrated by the clonogenic assay. The comet assay, the cytokinesis-block micronucleus assay, and the immunofluorescence of the γ-H2AX foci formation assay have that the compounds caused chromosomal damage to the cancer cells, with and without metabolic activation. The results obtained in the present study showed that the compounds assessed were genotoxic and mutagenic, inducing double-strand breaks in the DNA structure. The high selectivity indices observed for the compounds ON-2 and ON-3, especially after metabolic activation with the S9 fraction, must be highlighted. These experimental biological results, as well as the theoretical properties predicted for the compounds have shown that they are promising anticancer candidates to be exploited in additional studies.

Design and Synthesis of N-Doped Carbons as Efficient Metal-Free Catalysts in the Hydrogenation of 1-Chloro-4-Nitrobenzene.

Metal-free catalysts based on nitrogen-doped porous carbons were designed and synthesized from mixtures of melamine as nitrogen and carbon sources and calcium citrate as carbon source and porogen system. Considering the physicochemical and textural properties of the prepared carbons, a melamine/citrate ratio of 2:1 was selected to study the effect of the pyrolysis temperature. It was observed that a minimum pyrolysis temperature of 750 °C is required to obtain a carbonaceous structure. However, although there is a decrease in the nitrogen amount at higher pyrolysis temperatures, a gradual development of the porosity is produced from 750 °C to 850 °C. Above that temperature, a deterioration of the carbon porous structure is produced. All the prepared carbon materials, with no need for a further activation treatment, were active in the hydrogenation reaction of 1-chloro-4-nitrobenzene. A full degree of conversion was reached with the most active catalysts obtained from 2:1 melamine/citrate mixtures pyrolyzed at 850 °C and 900 °C, which exhibited a suitable compromise between the N-doping level and developed mesoporosity that facilitates the access of the reactants to the catalytic sites. What is more, all the materials showed 100% selectivity for the hydrogenation of the nitro group to form the corresponding chloro-aniline.

Deciphering the catalytic activity of nickel anchored on Fe3O4@SiO2@3-CPMS@L as a magnetically recoverable nanocatalyst for the efficacious reduction of 4-nitrophenol, nitrobenzene, and methyl orange.

In this paper, a versatile heterogeneous nanocatalyst was fabricated employing a self-assembly technique. To commence, Fe3O4 MNPs were coated with a thin layer of SiO2 using the stobbers method. Subsequently, the surface was further functionalized with 3-CPMS, followed by a reaction with a Schiff base. Finally, nickel NPs were deposited on the surface through in situ deposition, forming the Fe3O4@SiO2@3-CPMS@L-Ni magnetic nanocatalyst. The architecture of this magnetic nanocatalyst was meticulously characterized through an array of sophisticated techniques: XRD, FT-IR, SEM, TEM, BET and VSM. The XRD diffraction pattern confirmed the presence of Fe3O4 MNPs, SiO2, and Ni peaks, providing evidence for successful synthesis. Moreover, the successful functionalization with a Schiff base was demonstrated by the presence of an azomethane peak in the FTIR spectra of the synthesized nanocatalyst. The fabricated nanocatalyst was adeptly utilized for the reduction of 4-NP, NB, and MO demonstrating a remarkably elevated rate of catalytic efficacy. Moreover, this catalyst was effortlessly retrievable through the application of an external magnet, and it maintained its catalytic prowess across at least six consecutive cycles. The utilization of water as an environmentally friendly solvent, coupled with the utilization of abundant and cost-effective nickel catalyst instead of the costly Pd or Pt catalysts, along with the successful recovery and scalability of the catalyst, render this method highly advantageous from both environmental and economic perspectives for the reduction of 4-NP, NB, and MO.

Geobacter sulfurreducens promoted the biosynthesis of reduced graphene oxide and coupled it for nitrobenzene reduction.

In order to explore an efficient and green method to deal with nitrobenzene (NB) pollutant, reduced graphene oxide (rGO) as an electron shuttle was applied to enhance the extracellular electron transfer (EET) process of Geobacter sulfurreducens, which was a typical electrochemically active bacteria (EAB). In this study, rGO biosynthesis was achieved via the reduction of graphene oxide (GO) by G. sulfurreducens PCA within 3 days. Also, the rGO-PCA combining system completely reduced 50-200 µmol/L of NB to aniline as end product within one day. SEM characterization revealed that PCA cells were partly wrapped by rGO, and therefore the distance of electron transfer between strain PCA and rGO material was reduced. Beside, the ID/IG of GO, rGO, and rGO-PCA combining system were 0.990, 1.293 and 1.31, respectively. Moreover, highest currents were observed in rGO-PCA-NB as 12.950 µA/-12.560 µA at -408 mV/156 mV, attributing to the faster electron transfer efficiency in EET process. Therefore, the NB reduction was mainly due to: (I) direct EET process from G. sulfurreducens PCA to NB; (II) rGO served as electron shuttle and accelerated electron transfer to NB, which was the main degradation pathway. Overall, the biosynthesis of rGO via GO reduction by Geobacter promoted the NB removal process, which provided a facile strategy to alleviate the problematic nitroaromatic pollution in the environment.

The P300 acetyltransferase inhibitor C646 promotes membrane translocation of insulin receptor protein substrate and interaction with the insulin receptor.

Inhibition of P300 acetyltransferase activity by specific inhibitor C646 has been shown to improve insulin signaling. However, the underlying molecular mechanism of this improvement remains unclear. In this study, we analyzed P300 levels of obese patients and found that they were significantly increased in liver hepatocytes. In addition, large amounts of P300 appeared in the cytoplasm. Inhibition of P300 acetyltransferase activity by C646 drastically increased tyrosine phosphorylation of the insulin receptor protein substrates (IRS1/2) without affecting the tyrosine phosphorylation of the beta subunit of the insulin receptor (IRß) in hepatocytes in the absence of insulin. Since IRS1/2 requires membrane translocation and binding to inositol compounds for normal functions, we also examined the role of acetylation on binding to phosphatidylinositol(4,5)P2 and found that IRS1/2 acetylation by P300 reduced this binding. In contrast, we show that inhibition of IRS1/2 acetylation by C646 facilitates IRS1/2 membrane translocation. Intriguingly, we demonstrate that C646 activates IRß's tyrosine kinase activity and directly promotes IRß interaction with IRS1/2, leading to the tyrosine phosphorylation of IRS1/2 and subsequent activation of insulin signaling even in the absence of insulin. In conclusion, these data reveal the unique effects of C646 in activating insulin signaling in patients with obesity and diabetes.

In Situ Activatable Nitrobenzene-Cysteine-Copper(II) Nano-complexes for Programmed Photodynamic Cancer Therapy.

Photodynamic therapy (PDT) has been used to reduce cancerous and precancerous cells via reactive oxygen species (ROS) generation from photosensitizers. Numerous photosensitizers are available today to treat a variety of diseases, but their therapeutic efficacy is hindered within the tumor microenvironment, and there are safety concerns associated with their non-specific activation. In this work, we disclosed a nano-therapeutic based on in situ activatable nitrobenzene-cysteine-copper(II) nano-complexes (NCCNs) that work within cancer cells. Among the NCCNs, CyP shows outstanding potential as a promising candidate for programmed photodynamic cancer therapy with its unique properties such as (i) bright near-infrared imaging, (ii) chemodynamic therapeutic effect, (iii) photodynamic therapeutic effect (types I and II), and (iv) anti-cancer effect by anti-angiogenesis in early cancer stage under light. Overall, this work opens up exciting possibilities for the development of innovative and effective treatments for cancer, paving the way for future advancements in the clinical medicine field.

Degradation of Nitrobenzene by Mackinawite through a Sequential Two-Step Reduction and Oxidation Process.

Mackinawite (FeS) has gained increasing interest due to its potential application in contaminant removal by either reduction or oxidation processes. This study further demonstrated the efficiency of FeS in degrading nitrobenzene (ArNO2) via a sequential two-step reduction and oxidation process under neutral conditions. In the reduction stage, FeS rapidly reduced ArNO2 to aniline (ArNH2), with nitrosobenzene (ArNO) and phenylhydroxylamine (ArNHOH) serving as the intermediates. X-ray photoelectron spectroscopy (XPS) analysis indicated that both Fe(II) and S(II) in FeS contributed electrons to the reduction of ArNO2. In the subsequent oxidation stage with oxygen, by addition of 0.5 mM tripolyphosphate (TPP), ArNH2 generated in the reduction process could be effectively oxidized to aminophenols by hydroxyl radicals (•OH), which would undergo eventual mineralization via ring-cleavage reactions. TPP exerted a favorable role in enhancing •OH production for ArNH2 degradation by promoting the formation of the dissolved Fe(II)-TPP complex, thus enhancing the homogeneous Fenton reaction. Additionally, TPP adsorption inhibited the surface oxidation reactivity of FeS due to the change of Fe(II) coordination. Finally, the effective degradation of ArNO2 by FeS in actual groundwater was demonstrated by using this sequential reduction and oxidation approach. These research findings provide a theoretical basis for a new FeS-based remediation approach, offering an alternative way for comprehensive removal of ArNO2.

Photocatalytic performance of SiO2@TiO2 spheres in selective conversion of oxidation of benzyl alcohol to benzaldehyde and reduction of nitrobenzene to aniline.

Selective photocatalytic oxidation of benzyl alcohol to benzaldehyde and reduction of nitrobenzene to aniline reactions are investigated by using SiO2@TiO2 spheres produced in a simple route using chitosan as a template. The spheres are predominantly macroporous and, the XRD points out an amorphous crystallographic profile suggesting the uniform distribution of TiO2. Under low-power lighting for 4 hours, the conversions achieved was of the order of 49% and 99% for benzyl alcohol and nitrobenzene, respectively, with selectivity to benzaldehyde and aniline of 99% in both reactions. The study also follows the effects of the solvent and the presence of O2.

Development of Magnetizable, Nickel-Ferrite-Decorated Carbon Nanocomposites as Hydrogenation Catalyst for Aniline Synthesis.

Catalysts with magnetic properties can be easily recovered from the reaction medium without loss by using a magnetic field, which highly improves their applicability. To design such systems, we have successfully combined the magnetic properties of nickel ferrite nanoparticles with the positive properties of carbon-based catalyst supports. Amine-functionalized NiFe2O4 nanoparticles were deposited on the surfaces of nitrogen-doped bamboo-like carbon nanotubes (N-BCNT) and carbon nanolayers (CNL) by using a coprecipitation process. The magnetizable catalyst supports were decorated by Pd nanoparticles, and their catalytic activity was tested through the hydrogenation of nitrobenzene (NB). By using the prepared catalysts, high nitrobenzene conversion (100% for 120 min at 333 K) and a high aniline yield (99%) were achieved. The Pd/NiFe2O4-CNL catalyst was remarkable in terms of stability during the reuse tests due to the strong interaction formed between the catalytically active metal and its support (the activity was retained during four cycles of 120 min at 333 K). Furthermore, despite the long-lasting mechanical stress, no significant palladium loss (only 0.08 wt%) was detected.

Amine Functionalization Leads to Enhanced Performance for Nickel- and Cobalt-Ferrite-Supported Palladium Catalysts in Nitrobenzene Hydrogenation.

Easy preparation, good yield and easy recovery are the key challenges in the development of industrial catalysts. To meet all these three criteria, we have prepared intelligent, magnetizable NiFe2O4- and CoFe2O4-supported palladium catalysts that can be easily and completely recovered from the reaction medium by magnetic separation. The fast and facile preparation was achieved by a solvothermal method followed by sonochemical-assisted decomposition of the palladium nanoparticles onto the surface of the magnetic nanoparticles. The metal-support interaction was enhanced by amine functionalization of the supports using monoethanolamine. The performance and stability of the non-functionalized and amine-functionalized NiFe2O4- and CoFe2O4-supported palladium catalysts were compared in the industrially important nitrobenzene hydrogenation reaction. All catalysts showed high catalytic activity during aniline synthesis; complete nitrobenzene conversion and high aniline yield (above 97 n/n%) and selectivity (above 98 n/n%) were achieved. However, during reuse tests, the activity of the non-functionalized catalysts decreased, as the palladium was leached from the surface of the support. On the other hand, in the case of their amine-functionalized counterparts, there was no decrease in activity, and a non-significant decrease in palladium content could be measured. Based on these results, it can be concluded that amine functionalization of transition metal ferrites may result in more effective catalysts due to the enhanced metal-carrier interaction between the support and the precious metal.

Ultrasound-Assisted Mineralization of 2,4-Dinitrotoluene in Industrial Wastewater Using Persulfate Coupled with Semiconductors.

Oxidative degradation of 2,4-dinitrotoluenes in aqueous solution was executed using persulfate combined with semiconductors motivated by ultrasound (probe type, 20 kHz). Batch-mode experiments were performed to elucidate the effects of diverse operation variables on the sono-catalytic performance, including the ultrasonic power intensity, dosage of persulfate anions, and semiconductors. Owing to pronounced scavenging behaviors caused by benzene, ethanol, and methanol, the chief oxidants were presumed to be sulfate radicals which originated from persulfate anions, motivated via either the ultrasound or sono-catalysis of semiconductors. With regard to semiconductors, the increment of 2,4-dinitrotoluene removal efficiency was inversely proportional to the band gap energy of semiconductors. Based on the outcomes indicated in a gas chromatograph-mass spectrometer, it was sensibly postulated that the preliminary step for 2,4-dinitrotoluene removal was denitrated into o-mononitrotoluene or p-mononitrotoluene, followed by decarboxylation to nitrobenzene. Subsequently, nitrobenzene was decomposed to hydroxycyclohexadienyl radicals and converted into 2-nitrophenol, 3-nitrophenol, and 4-nitrophenol individually. Nitrophenol compounds with the cleavage of nitro groups synthesized phenol, which was sequentially transformed into hydroquinone and p-benzoquinone.

Development of reliable quantitative structure-toxicity relationship models for toxicity prediction of benzene derivatives using semiempirical descriptors.

The Health and environmental hazards of benzene and nitrobenzene (NB) derivatives have remained a topic of interest of researchers. In silico methods for prediction of toxicity of chemicals have proved their worth in accurate forecast of environmental as well as health toxicity and are strongly recommended by regulatory authorities. Two quantitative structure-toxicity relationship (QSTR) models explaining Scenedesmus obliquus toxicity trends among 39 benzene derivatives and Tetrahymena pyriformis toxicity of 103 NB and 392 benzene derivatives are developed using semiempirical quantum chemical parameters. The best constructed QSTR models have good fitting ability (R2 = 0.8053, 0.7591, and 0.8283) and robustness (Q2LOO = 0.7507, 0.7227, and 0.8194; Q2LMO = 0.7338, 0.7153, and 0.8172). The external predictivity of all the models are quite good (R2EXT = 0.8256, 0.9349, and 0.8698). Electronegativity, Cosmo volume, total energy, and molecular weight are responsible for the increase and decrease of toxicity of benzene derivatives against S. obliquus while electronegativity, electrophilicity index, the heat of formation, total energy, hydrophobicity, and cosmo volume are responsible for modulation of toxicity of NB and benzene derivatives toward T. pyriformis. These models fulfill the requirements of all the five OECD principles.

Single-Molecule Tunneling Sensors for Nitrobenzene Explosives.

The tunneling current through the single-molecule junctions principally offers the ultimate solution for chemical and biochemical sensing via the interactions between probes and target analytes at the single-molecule level. However, it remains unexplored to achieve the sensitive and selective detection of targeted analytes using single-molecule junction techniques due to the challenge in quantitative evaluation of sensing sensitivity and selectivity. Herein, we demonstrate a single-molecule tunneling sensor for the highly sensitive and selective detection of nitrobenzene explosives using scanning tunneling microscope break junction (STM-BJ). Taking advantage of π-π stacking interactions between the molecular probes and nitrobenzene explosives, we use a spectral clustering algorithm to assign the signal of probes and π-stacked probes for sensitively detecting the targeted analytes and the distinguishable conductance change of probes when interacting with different nitroaromatic explosive compounds for selective detection. We find that pronounced conductance changes up to 0.8 orders of magnitude when the probes interact with TNT. Also, we obtain a sensitivity of up to ∼10 pM for TNT and high sensitivity for eight TNT analogues. Combined with theoretical calculations, we discover that the harness of the destructive quantum interference of the probe M1OH after interacting with TNT leads to high selectivity in sensing with TNT. Our work demonstrates the great potential of the single-molecule tunneling current for environmental sensing molecules with high selectivity and sensitivity.

Ultrathin Graphdiyne/Graphene Heterostructure as a Robust Electrochemical Sensing Platform.

Graphdiyne (GDY) has been considered as an appealing electrode material for electrochemical sensing because of its alkyne-rich structure and high degrees of π-conjugation, which shows great affinity to heavy metal ions and pollutant molecules via d-π and π-π interactions. However, the low surface area and poor conductivity of bulk GDY limit its electrochemical performance. Herein, a two-dimensional ultrathin GDY/graphene (GDY/G) nanostructure was synthesized and used as an electrode material for electrochemical sensing. Graphene plays the role of an epitaxy template for few-layered GDY growth and conductive layers. The formed few-layered GDY with a high surface area possesses abundant affinity sites toward heavy metal ions (Cd2+, Pb2+) and toxic molecules, for example, nitrobenzene and 4-nitrophenol, via d-π and π-π interactions, respectively. Moreover, hemin as a key part of the enzyme catalytic motif was immobilized on GDY/G via π-π interactions. The artificial enzyme mimic hemin/GDY/G-modified electrode exhibited promising ascorbic acid and uric acid detection performance with excellent sensitivity and selectivity, a good linear range, and reproducibility. More importantly, real sample detection and the feasibility of this electrochemical sensor as a wearable biosensor were demonstrated.

Covalent Functionalization of Antimonene and Bismuthene Nanosheets.

Antimonene and bismuthene are promising members of the 2D pnictogen family with their tunable band gaps, high electronic conductivity, and ambient stability, making them suitable for electronic and optoelectronic applications. However, semi-metal to semiconductor transition occurs only in the mono/bilayer regime, limiting their applications. Covalent functionalization is a versatile method for tuning materials' chemical, electronic, and optical properties and can be explored for tuning the properties of pnictogens. In this work, emissions in liquid exfoliated antimonene and bismuthene are observed at ≈2.23 and ≈2.33 eV, respectively. Covalent functionalization of antimonene and bismuthene with p-nitrobenzene diazonium salt proceeds with the transfer of lone pairs from Sb/Bi to the diazonium salt, introducing organic moieties on the surface attached predominantly via Sb/BiC bonds. Consequently, Sb/Bi signatures in Raman and X-ray photoelectron spectra are blue-shifted, implying lattice distortion and charge transfer. Interestingly, emission can be tailored upon functionalization to 2.18 and 2.27 eV for antimonene and bismuthene respectively, and this opens the possibility of tuning the properties of pnictogens and related materials. This is the first report on covalent functionalization of antimonene and bismuthene. It sheds light on the reaction mechanism on pnictogen surfaces and demonstrates tunability of optical property and surface passivation.