Hydrogen Peroxide Treatment of Softwood-Derived Poly(Ethylene Glycol)-Modified Glycol Lignin at Room Temperature.

Recently, a large-scale production system of softwood-derived poly(ethylene glycol) (PEG)-modified glycol lignin (GL) was developed to produce high-quality lignin derivatives with substantially controlled chemical structures and attractive thermal properties. In this study, the further upgrading of GL properties with carboxy functionalization was demonstrated through the room-temperature hydrogen peroxide (H2O2) treatment with the mass ratio of H2O2 to GL, 1:1 and 1:3, for 7 d. The changes in the chemical structure, carboxy group content, molecular weight, and thermal properties of the insoluble portions of partially oxidized glycol lignins (OGLs) were then investigated. Nuclear magnetic resonance and thioacidolysis data revealed that the oxidative functionalization involved the cleavage of ß-O-4 linkages and the oxidative cleavage of guaiacyl aromatic rings into muconic acid-type structures. This was validated by attenuated total reflectance-Fourier transform infrared (ATR-FTIR) spectroscopy and potentiometric titration. Overall, the results suggested that the varying outcomes of carboxy group content (0.81-2.04 mmol/g OGL) after 7-d treatment depended on the type of the GL origin having varying amounts of the retained native lignin structure (e.g., ß-O-4 linkages), which were prepared from different source-wood-meal sizes and PEG molecular masses.

Tangential flow filtration facilitated fractionation and PEGylation of low and high-molecular weight polymerized hemoglobins and their biophysical properties.

Various types of hemoglobin (Hb)-based oxygen carriers (HBOCs) have been developed as red blood cell substitutes for treating blood loss when blood is not available. Among those HBOCs, glutaraldehyde polymerized Hbs have attracted significant attention due to their facile synthetic route, and ability to expand the blood volume and deliver oxygen. Hemopure®, Oxyglobin®, and PolyHeme® are the most well-known commercially developed glutaraldehyde polymerized Hbs. Unfortunately, only Oxyglobin® was approved by the FDA for veterinary use in the United States, while Hemopure® and PolyHeme® failed phase III clinical trials due to their ability to extravasate from the blood volume into the tissue space which facilitated nitric oxide scavenging and tissue deposition of iron, which elicited vasoconstriction, hypertension and oxidative tissue injury. Fortunately, conjugation of poly (ethylene glycol) (PEG) on the surface of Hb is capable of reducing the vasoactivity of Hb by creating a hydration layer surrounding the Hb molecule, which increases its hydrodynamic diameter and reduces tissue extravasation. Several commercial PEGylated Hbs (MP4®, Sanguinate®, Euro-PEG-Hb) have been developed for clinical use with a longer circulatory half-life and improved safety compared to Hb. However, all of these commercial products exhibited relatively high oxygen affinity compared to Hb, which limited their clinical use. To dually address the limitations of prior generations of polymerized and PEGylated Hbs, this current study describes the PEGylation of polymerized bovine Hb (PEG-PolybHb) in both the tense (T) and relaxed (R) quaternary state via thiol-maleimide chemistry to produce an HBOC with low or high oxygen affinity. The biophysical properties of PEG-PolybHb were measured and compared with those of commercial polymerized and PEGylated HBOCs. T-state PEG-PolybHb possessed higher hydrodynamic volume and P50 than previous generations of commercial PEGylated Hbs. Both T- and R-state PEG-PolybHb exhibited significantly lower haptoglobin binding rates than the precursor PolybHb, indicating potentially reduced clearance by CD163 + monocytes and macrophages. Thus, T-state PEG-PolybHb is expected to function as a promising HBOC due to its low oxygen affinity and enhanced stealth properties afforded by the PEG hydration shell.

Deep dive on the proteome of salivary extracellular vesicles: comparison between ultracentrifugation and polymer-based precipitation isolation.

Salivary extracellular vesicles (EVs), as novel functional carriers and potential biomarkers, are usually obtained by ultracentrifugation (UC) and polyethylene glycol (PEG)-based precipitation methods. However, salivary EVs obtained by these two methods have not been systematically compared. Here, we perform an in-depth analysis on EVs isolated by these two methods using proteomics. Both methods obtain EVs ranging from 40 to 210 nm, with the PEG method resulting in a wider size distribution. PEG-separated products were irregularly shaped and aggregated, while UC-separated ones were monodispersed and teacup-shaped. Additionally, the expression of EV-specific markers was higher in UC-separated EVs. Using tandem mass spectrometry proteomics, we identified and quantified 1217 kinds of saliva exosomal proteins and 361 kinds of differential proteins, showing that UC can isolate more EV-related proteins. These results offer some guidance for EV separating and provide potential direction for the use of EVs in non-invasive diagnosis.

Highly selective and antifouling electrochemical biosensors for sensitive MicroRNA assaying based on conducting polymer polyaniline functionalized with zwitterionic peptide.

Ultrasensitive and low-fouling microRNA electrochemical biosensors were successfully constructed by introducing thiol-terminated antifouling molecules (peptide sequence, polyethylene glycol, or mercapto alcohol) onto the surface of polyaniline-modified electrodes. For the three kinds of antifouling materials investigated, the newly designed and synthesized peptide exhibited superior antifouling ability to others, and it could effectively reduce the nonspecific adsorption of proteins and even prevent the fouling effect of serum. Compared with microRNA biosensors without antifouling capability, or those modified with polyethylene glycol or mercapto alcohol, the biosensor modified with the designed zwitterionic peptide showed the highest specificity for single-base mismatch, three-base mismatch, and completely complementary microRNAs. Most interestingly, the experimental results indicated that the introduction of antifouling molecules to the sensing interfaces did not significantly change the sensitivity of the biosensor. The strategy of constructing antifouling biosensors based on newly synthesized zwitterionic peptides and conducting polymers can be promisingly extended to the development of other electrochemical sensors and biosensors without encountering biofouling. Graphical abstract Ultrasensitive and low-fouling microRNA electrochemical biosensors were constructed by introducing thiol-terminated antifouling molecules (peptide sequence, polyethylene glycol, or mercapto alcohol) onto the surface of polyaniline-modified electrodes. The biosensor modified with the designed zwitterionic peptide showed the highest specificity amongst four kinds of biosensors.

Hybrid MoS2/g-C3N4-assisted LDI mass spectrometry for rapid detection of small molecules and polyethylene glycols and direct determination of uric acid in complicated biological samples.

A novel matrix-assisted laser desorption/ionization time-of-flight mass spectrometric method (MALDI-TOF MS) for determination of highly sensitive small molecular compounds was developed based on molybdenum disulfide nanosheets hybridized with ultrathin graphitic carbon nitride (MoS2/g-C3N4) as the matrix. With this approach, the synergistic effects of MoS2 and g-C3N4 enhance the UV absorption of MoS2/g-C3N4, increase both desorption and ionization efficiency in LDI MS, and induce higher signal-to-noise ratio of analytes when compared with the bare MoS2 and g-C3N4 matrix in the determination of amino acids, antibiotics, neutral oligosaccharides, uric acid, and polyethylene glycols (PEGs). The detection limits of these small molecular compounds are in the ranges 0.1 to 10 µg mL-1, 1*10-3 to 1.0 µg mL-1, 1.0 to 10 µg mL-1, and 2*10-4 µg mL-1, respectively, and the polydispersity index of these PEGs is less than 1.02. Moreover, high salt tolera`nce and homogeneous deposition on the spot results in good reproducibility. The relative standard deviations (RSDs) of shot-to-shot and spot-to-spot (n = 15) of these compounds are less than 10.1% and 12.5%, respectively. With MoS2/g-C3N4, the uric acid in complicated biological samples can be directly determined in combination with LDI-TOF MS. We synthesized MoS2/g-C3N4 nanohybrid as an efficient matrix for MALDI-TOF MS analysis of small molecules as well as quantitative detection of uric acid in human urine.

Assessment of the Potential and Limitations of Elemental Mass Spectrometry in Life Sciences for Absolute Quantification of Biomolecules Using Generic Standards.

Inductively coupled plasma-mass spectrometry (ICP-MS) has been widely used in Life Sciences for the absolute quantification of biomolecules without specific standards, assuming the same response for generic compounds including complex biomolecules. However, contradictory results have been published on this regard. We present the first critical statistical comparison of the ICP-MS response factors obtained for 14 different relevant S-containing biomolecules (three peptides, four proteins, one amino acid, two cofactors, three polyethylene glycol (PEG) derivatives, and sulfate standard), covering a wide range of hydrophobicities and molecular sizes. Two regular flow nebulizers and a total consumption nebulizer (TCN) were tested. ICP-MS response factors were determined though calibration curves, and isotope dilution analysis was used to normalize the results. No statistical differences have been found for low-molecular-weight biocompounds, PEGs, and nonhydrophobic peptides using any of the nebulizers tested. Interestingly, while statistical differences were still found negligible (96-104%) for the proteins and hydrophobic peptide using the TCN, significantly lower response factors (87-40%) were obtained using regular flow nebulizers. Such differential behavior seems to be related mostly to hydrophobicity and partially to the molecular weight. Findings were validated using IDA in intact and digested bovine serum albumin solutions using the TCN (98 and 100%, respectively) and the concentric nebulizer (73 and 97%, respectively). Additionally, in the case of a phosphoprotein, results were corroborated using the P trace in parallel to the S trace used along the manuscript. This work seems to suggest that ICP-MS operated with regular nebulizers can offer absolute quantification using generic standards for most biomolecules except proteins and hydrophobic peptides.

Transcriptional response of Bacillus megaterium FDU301 to PEG200-mediated arid stress.

BACKGROUND: For microorganisms on a paper surface, the lack of water is one of the most important stress factors. A strain of Bacillus megaterium FDU301 was isolated from plaques on a paper surface using culture medium with polyethylene glycol 200 (PEG200) to simulate an arid condition. Global transcriptomic analysis of B. megaterium FDU301 grown under normal and simulated arid conditions was performed via RNA-seq technology to identify genes involved in arid stress adaptation. RESULTS: The transcriptome of B. megaterium FDU301 grown in LB medium under arid (15% PEG200 (w/w)) and normal conditions were compared. A total of 2941 genes were differentially expressed, including 1422 genes upregulated and 1519 genes downregulated under arid conditions. Oxidative stress-responsive regulatory genes perR, fur, and tipA were significantly upregulated, along with DNA protecting protein (dps), and catalase (katE). Genes related to Fe2+ uptake (feoB), sporulation stage II (spoIIB, spoIIE, spoIIGA), small acid-soluble spore protein (sspD), and biosynthesis of compatible solute ectoine (ectB, ectA) were also highly expressed to various degrees. Oxidative phosphorylation-related genes (atpB, atpE, atpF, atpH, atpA, atpG, atpD, atpC) and glycolysis-related genes (pgk, tpiA, frmA) were significantly downregulated. CONCLUSION: This is the first report about transcriptomic analysis of a B. megaterium to explore the mechanism of arid resistance. Major changes in transcription were seen in the arid condition simulated by PEG200 (15%), with the most important one being genes related to oxidative stress. The results showed a complex mechanism for the bacteria to adapt to arid stress.

Tailoring Kidney Transport of Organic Dyes with Low-Molecular-Weight PEGylation.

Subtle changes in size can induce distinct responses of the body to hard nanomaterials; however, it is largely unknown whether just a few ethylene oxide unit differences in soft poly(ethylene glycol) (PEG) molecules could significantly alter the renal clearance of small molecules. By systematically investigating in vivo transport of the representative renal clearable organic dyes, IRDye800CW after being conjugated with a series of PEG molecules with molecular weight (MW) below 10 kDa, we found a MW-dependent scaling law: PEG45 (MW = 2100 Da) is an optimized MW to generate the most efficient renal clearance for IRDye800CW by expediting the glomerular filtration of organic dyes and reducing their nonspecific interactions with background tissue. Moreover, the uniqueness of PEG45 can be generalized to other organic dyes such as ZW800-1 and fluorescein. This finding highlights the importance of low-MW PEGylation in tailoring in vivo transport of organic fluorophores, which would broaden their biomedical applications.

Determination of extent of PEGylation using denaturing capillary isoelectric focussing.

Conjugated proteins and enzymes are often formed using N-hydroxysuccinimide (NHS) chemistry, which reacts with free primary amines resulting in a loss of charge and a reduction in isoelectric point (pI). Measurement of the extent of reaction of these conjugates is critical for biopharmaceutical developers. Due to this change in protein charge state, denaturing capillary isoelectric focussing (cIEF) offers a potentially straightforward and convenient approach for extent-of-reaction quantification. Here, we demonstrate the potential of this technique with poly(ethylene glycol) (PEG) conjugates of Erwinia chrysanthemil-asparaginase (ErA). Development of an appropriate sample preparation technique is critical to achieving reproducible cIEF electropherograms, particularly for denaturation-resistant proteins such as ErA, and an emphasis was placed on this during development of the PEG-ErA cIEF method. cIEF electropherograms demonstrating a distribution of PEGylation states in a bell-shaped curve were obtained, and assignment of PEGylation states to these peaks was critical to routine use of the method. The method is sensitive enough to resolve non-lysine adducts of PEG (such as those conjugated to histidine residues) and was shown to give reproducible results over a 2 year period. Biopharmaceutical developers should consider cIEF for extent of reaction monitoring and measurement for conjugates of free amine groups.

Distinct classes of multi-subunit heterogeneity: analysis using Fourier Transform methods and native mass spectrometry.

Native electrospray mass spectrometry is a powerful method for determining the native stoichiometry of many polydisperse multi-subunit biological complexes, including multi-subunit protein complexes and lipid-bound transmembrane proteins. However, when polydispersity results from incorporation of multiple copies of two or more different subunits, it can be difficult to analyze subunit stoichiometry using conventional mass spectrometry analysis methods, especially when m/z distributions for different charge states overlap in the mass spectrum. It was recently demonstrated by Marty and co-workers (K. K. Hoi, et al., Anal. Chem., 2016, 88, 6199-6204) that Fourier Transform (FT)-based methods can determine the bulk average lipid composition of protein-lipid Nanodiscs assembled with two different lipids, but a detailed statistical description of the composition of more general polydisperse two-subunit populations is still difficult to achieve. This results from the vast number of ways in which the two types of subunit can be distributed within the analyte ensemble. Here, we present a theoretical description of three common classes of heterogeneity for mixed-subunit analytes and demonstrate how to differentiate and analyze them using mass spectrometry and FT methods. First, we first describe FT-based analysis of mass spectra corresponding to simple superpositions, convolutions, and multinomial distributions for two or more different subunit types using model data sets. We then apply these principles with real samples, including mixtures of single-lipid Nanodiscs in the same solution (superposition), mixed-lipid Nanodiscs and copolymers (convolutions), and isotope distribution for ubiquitin (multinomial distribution). This classification scheme and the FT method used to study these analyte classes should be broadly useful in mass spectrometry as well as other techniques where overlapping, periodic signals arising from analyte mixtures are common.

Recent advances in the bioanalytical methods of polyethylene glycols and PEGylated pharmaceuticals.

Polyethylene glycols are synthetic polymers composed of repeating oxyethylene subunits, which have been known for non-toxic, non-immunogenic, non-antigenic, good solubility in water and therefore approved for pharmaceutical applications. Recently, attachment or amalgamation of polyethylene glycols to therapeutic small molecules, peptides, proteins, or nanoparticles has become a mature technology for the sake of improving their pharmacokinetic and pharmacological profiles, also referred to as PEGylation. By comparison, there are only a few PEGylated pharmaceuticals have been registered for further clinical trials and even less was approved for marketing. High failure rate of PEGylated pharmaceuticals in pre-clinical and clinical trials could be majorly attributed to their unclear pharmacokinetic behaviors. Therefore, the in vivo fate of the PEGylated pharmaceuticals for the various routes of administration needs to be thoroughly investigated An accurate in vivo pharmacological study thereof highly depends on the precise detection of polyethylene glycols as well as their fragments in biological matrixes. The goal of this review is to highlight the analytical methods that were developed and applied to evaluate the polyethylene glycols in pharmaceutical ingredients and excipients, which bring us closer to bridging the gap between the development of polyethylene glycol-based drug delivery systems and their clinical application.

Fast and Purification-Free Characterization of Bio-Nanoparticles in Biological Media by Electrical Asymmetrical Flow Field-Flow Fractionation Hyphenated with Multi-Angle Light Scattering and Nanoparticle Tracking Analysis Detection.

Accurate physico-chemical characterization of exosomes and liposomes in biological media is challenging due to the inherent complexity of the sample matrix. An appropriate purification step can significantly reduce matrix interferences, and thus facilitate analysis of such demanding samples. Electrical Asymmetrical Flow Field-Flow Fractionation (EAF4) provides online sample purification while simultaneously enabling access to size and Zeta potential of sample constituents in the size range of approx. 1-1000 nm. Hyphenation of EAF4 with Multi-Angle Light Scattering (MALS) and Nanoparticle Tracking Analysis (NTA) detection adds high resolution size and number concentration information turning this setup into a powerful analytical platform for the comprehensive physico-chemical characterization of such challenging samples. We here present EAF4-MALS hyphenated with NTA for the analysis of liposomes and exosomes in complex, biological media. Coupling of the two systems was realized using a flow splitter to deliver the sample at an appropriate flow speed for the NTA measurement. After a proof-of-concept study using polystyrene nanoparticles, the combined setup was successfully applied to analyze liposomes and exosomes spiked into cell culture medium and rabbit serum, respectively. Obtained results highlight the benefits of the EAF4-MALS-NTA platform to study the behavior of these promising drug delivery vesicles under in vivo like conditions.

FIXing postinfusion monitoring: Assay experiences with N9-GP (nonacog beta pegol; Refixia® ; Rebinyn® ).

N9-GP (nonacog beta pegol; Refixia® ; Rebinyn® , Novo Nordisk A/S, Bagsvaerd, Denmark) is a glycoPEGylated extended half-life recombinant factor IX (rFIX) that exhibits efficacy and potency comparable to unmodified FIX molecules in non-clinical models. Phase 3 clinical trials have confirmed the efficacy and tolerability of N9-GP for the prevention and on-demand treatment of bleeding episodes in patients with haemophilia B. Recent studies have shown that PEGylation affects clotting times in activated partial thromboplastin time (aPTT)-based one-stage activity assays due to interaction between the FIX molecule and certain aPTT reagents. In recognition of the challenges surrounding FIX activity assessment, the identification of consistent, reproducible and accurate assays to measure FIX activity has been a priority for Novo Nordisk, running in parallel to the clinical development program for N9-GP. N9-GP activity can be reliably measured using chromogenic substrate assays and specific aPTT reagents. The conjugation of the PEG moiety to the FIX molecule may affect one-stage aPTT-based clotting assays in a reagent-dependent manner. Many aPTT reagents that use silica as the contact activator dramatically overestimate N9-GP activity due to premature activation. On the other hand, the contact activator in some other aPTT reagents negatively affects the enzymatic activity of FXIa, causing the underestimation of N9-GP activity. While N9-GP activity cannot be measured consistently with all available aPTT reagents, accurate N9-GP measurements can be achieved with certain aPTT reagents. Here, we review the studies that led to these findings and summarize the current options for accurate measurement of N9-GP in patient samples.

Application of novel solid phase extraction-NMR protocols for metabolic profiling of human urine.

Metabolite identification and annotation procedures are necessary for the discovery of biomarkers indicative of phenotypes or disease states, but these processes can be bottlenecked by the sheer complexity of biofluids containing thousands of different compounds. Here we describe low-cost novel SPE-NMR protocols utilising different cartridges and conditions, on both natural and artificial urine mixtures, which produce unique retention profiles useful for metabolic profiling. We find that different SPE methods applied to biofluids such as urine can be used to selectively retain metabolites based on compound taxonomy or other key functional groups, reducing peak overlap through concentration and fractionation of unknowns and hence promising greater control over the metabolite annotation/identification process.

Differences in Nanoparticle Uptake in Transplanted and Autochthonous Models of Pancreatic Cancer.

Human pancreatic ductal adenocarcinoma (PDAC) contains a distinctively dense stroma that limits the accessibility of anticancer drugs, contributing to its poor overall prognosis. Nanoparticles can enhance drug delivery and retention in pancreatic tumors and have been utilized clinically for their treatment. In preclinical studies, various mouse models differentially recapitulate the microenvironmental features of human PDAC. Here, we demonstrate that through utilization of different organic cosolvents and by doping of a homopolymer of poly(ε-caprolactone), a diblock copolymer composition of poly(ethylene oxide)- block-poly(ε-caprolactone) may be utilized to generate biodegradable and nanoscale micelles with different physical properties. Noninvasive optical imaging was employed to examine the pharmacology and biodistribution of these various nanoparticle formulations in both allografted and autochthonous mouse models of PDAC. In contrast to the results reported with transplanted tumors, spherical micelles as large as 300 nm in diameter were found to extravasate in the autochthonous model, reaching a distance of approximately 20 µm from the nearest tumor cell clusters. A lipophilic platinum(IV) prodrug of oxaliplatin was further able to achieve a ∼7-fold higher peak accumulation and a ∼50-fold increase in its retention half-life in pancreatic tumors when delivered with 100 nm long worm-like micelles as when compared to the free drug formulation of oxaliplatin. Through further engineering of nanoparticle properties, as well as by widespread adoption of the autochthonous tumor model for preclinical testing, future therapeutic formulations may further enhance the targeting and penetration of anticancer agents to improve survival outcomes in PDAC.

A novel identification method for CPPU-treated kiwifruits based on images.

BACKGROUND: The application of exogenous plant growth regulator, for example forchlorfenuron (CPPU), on kiwifruits has become an important factor that influences kiwifruit economic efficiency and the health development of the kiwifruit industry. Owing to the slight difference in calyx shape between the kiwifruits treated with CPPU (CPPU-treated kiwifruits) and the kiwifruits without CPPU treatment (CPPU-untreated kiwifruits), this study aims to provide a cheap, quick, convenient, and non-destructive method for identifying CPPU-treated kiwifruits based on the images of kiwifruits captured at visible lights. RESULTS: The identification method includes three steps. Firstly, the kiwifruit was extracted from the background by using Otsu algorithm, hole filling operation and 'bwareaopen' function. Secondly, the calyx was extracted by using corrosion, image enhancement, hole filling and closing operations. Finally, the length/width ratio of the minimum enclosing rectangle of calyx region was calculated. The kiwifruit was regarded as a CPPU-treated kiwifruit if the length/width ratio of the rectangle was higher than 1.6. Otherwise, the kiwifruit was regarded as a CPPU-untreated one. The method had the total identification accuracy rate of 90.0% when the kiwifruit images were captured either by utilizing a smartphone at normal lighting condition or by using an image acquisition system. CONCLUSION: The programs run on computer and smartphone were developed, and they could realize kiwifruit identification in 0.6 s and 2 s, respectively. The study makes identifying CPPU-treated kiwifruits in online processing be realizable, and offers a convenient method for kiwifruit consumers. © 2019 Society of Chemical Industry.

A Comparative Solubility Enhancement Study of Cefixime Trihydrate Using Different Dispersion Techniques.

This study aimed to investigate the effect of different polymers (polyethylene glycol 4000 and 6000 and Soluplus®) on the enhancement of solubility, dissolution, and stability of cefixime trihydrate as a selected class II model drug. Different solid dispersions have been prepared using conventional methods and supercritical fluid technology. The effect of co-solvent incorporation in supercritical fluid technology was also studied. Physicochemical properties for solid dispersions were investigated using Fourier transform infrared analysis, differential scanning calorimetry, thermogravimetric analysis, powder X-ray diffraction, and scanning electron microscopy. The solubility of the prepared solid dispersions increased except for those prepared with Soluplus® using supercritical fluid technology without co-solvent. The best enhancement in the release profile was recorded by Soluplus®-based solid dispersions prepared using a conventional method. The conventional methods of preparation and the presence of co-solvent in supercritical fluid technology converted cefixime into its amorphous form.

Insight into the Dissolution Molecular Mechanism of Ternary Solid Dispersions by Combined Experiments and Molecular Simulations.

With the increase concern of solubilization for insoluble drug, ternary solid dispersion (SD) formulations developed more rapidly than binary systems. However, rational formulation design of ternary systems and their dissolution molecular mechanism were still under development. Current research aimed to develop the effective ternary formulations and investigate their molecular mechanism by integrated experimental and modeling techniques. Glipizide (GLI) was selected as the model drug and PEG was used as the solubilizing polymer, while surfactants (e.g., SDS or Tween80) were the third components. SD samples were prepared at different weight ratio by melting method. In the dissolution tests, the solubilization effect of ternary system with very small amount of surfactant (drug/PEG/surfactant 1/1/0.02) was similar with that of binary systems with high polymer ratios (drug/PEG 1/3 and 1/9). The molecular structure of ternary systems was characterized by differential scanning calorimetry (DSC), infrared absorption spectroscopy (IR), X-ray diffraction (XRD), and scanning electron microscope (SEM). Moreover, molecular dynamic (MD) simulations mimicked the preparation process of SDs, and molecular motion in solvent revealed the dissolution mechanism of SD. As the Gordon-Taylor equation described, the experimental and calculated values of Tg were compared for ternary and binary systems, which confirmed good miscibility of GLI with other components. In summary, ternary SD systems could significantly decrease the usage of polymers than binary system. Molecular mechanism of dissolution for both binary and ternary solid dispersions was revealed by combined experiments and molecular modeling techniques. Our research provides a novel pathway for the further research of ternary solid dispersion formulations.

Identification of Poly(ethylene glycol) and Poly(ethylene glycol)-Based Detergents Using Peptide Search Engines.

Poly(ethylene glycol) (PEG) is one of the most common polymer contaminations in mass spectrometry (MS) samples. At present, the detection of PEG and other polymers relies largely on manual inspection of raw data, which is laborious and frequently difficult due to sample complexity and retention characteristics of polymer species in reversed-phase chromatography. We developed a new strategy for the automated identification of PEG molecules from tandem mass spectrometry (MS/MS) data using protein identification algorithms in combination with a database containing "PEG-proteins". Through definition of variable modifications, we extend the approach for the identification of commonly used PEG-based detergents. We exemplify the identification of different types of polymers by static nanoelectrospray tandem mass spectrometry (nanoESI-MS/MS) analysis of pure detergent solutions and data analysis using Mascot. Analysis of liquid chromatography-tandem mass spectrometry (LC-MS/MS) runs of a PEG-contaminated sample by Mascot identified 806 PEG spectra originating from four PEG species using a defined set of modifications covering PEG and common PEG-based detergents. Further characterization of the sample for unidentified PEG species using error-tolerant and mass-tolerant searches resulted in identification of 3409 and 3187 PEG-related MS/MS spectra, respectively. We further demonstrate the applicability of the strategy for Protein Pilot and MaxQuant.

Pedicle screw anchorage of carbon fiber-reinforced PEEK screws under cyclic loading.

PURPOSE: Pedicle screw loosening is a common and significant complication after posterior spinal instrumentation, particularly in osteoporosis. Radiolucent carbon fiber-reinforced polyetheretherketone (CF/PEEK) pedicle screws have been developed recently to overcome drawbacks of conventional metallic screws, such as metal-induced imaging artifacts and interference with postoperative radiotherapy. Beyond radiolucency, CF/PEEK may also be advantageous over standard titanium in terms of pedicle screw loosening due to its unique material properties. However, screw anchorage and loosening of CF/PEEK pedicle screws have not been evaluated yet. The aim of this biomechanical study therefore was to evaluate whether the use of this alternative nonmetallic pedicle screw material affects screw loosening. The hypotheses tested were that (1) nonmetallic CF/PEEK pedicle screws resist an equal or higher number of load cycles until loosening than standard titanium screws and that (2) PMMA cement augmentation further increases the number of load cycles until loosening of CF/PEEK screws. METHODS: In the first part of the study, left and right pedicles of ten cadaveric lumbar vertebrae (BMD 70.8 mg/cm3 ± 14.5) were randomly instrumented with either CF/PEEK or standard titanium pedicle screws. In the second part, left and right pedicles of ten vertebrae (BMD 56.3 mg/cm3 ± 15.8) were randomly instrumented with either PMMA-augmented or nonaugmented CF/PEEK pedicle screws. Each pedicle screw was subjected to cyclic cranio-caudal loading (initial load ranging from - 50 N to + 50 N) with stepwise increasing compressive loads (5 N every 100 cycles) until loosening or a maximum of 10,000 cycles. Angular screw motion ("screw toggling") within the vertebra was measured with a 3D motion analysis system every 100 cycles and by stress fluoroscopy every 500 cycles. RESULTS: The nonmetallic CF/PEEK pedicle screws resisted a similar number of load cycles until loosening as the contralateral standard titanium screws (3701 ± 1228 vs. 3751 ± 1614 load cycles, p = 0.89). PMMA cement augmentation of CF/PEEK pedicle screws furthermore significantly increased the mean number of load cycles until loosening by 1.63-fold (5100 ± 1933 in augmented vs. 3130 ± 2132 in nonaugmented CF/PEEK screws, p = 0.015). In addition, angular screw motion assessed by stress fluoroscopy was significantly smaller in augmented than in nonaugmented CF/PEEK screws before as well as after failure. CONCLUSIONS: Using nonmetallic CF/PEEK instead of standard titanium as pedicle screw material did not affect screw loosening in the chosen test setup, whereas cement augmentation enhanced screw anchorage of CF/PEEK screws. While comparable to titanium screws in terms of screw loosening, radiolucent CF/PEEK pedicle screws offer the significant advantage of not interfering with postoperative imaging and radiotherapy. These slides can be retrieved under Electronic Supplementary Material.