Third molar agenesis in individuals with supernumerary teeth.

OBJECTIVES: To explore the association between third molar agenesis and supernumerary tooth formation in a white-European population. MATERIALS AND METHODS: A record review in various orthodontic clinics identified 380 eligible white-European individuals, half of whom had non-syndromic permanent supernumerary teeth (122 males and 68 females, totalling 244 supernumerary teeth; median age: 13.1, iqr: 1.5 years), and the other half were age- and sex-matched controls with full dentition, excluding the third molars. Tooth sequences were identified in panoramic radiographs. RESULTS: In the supernumerary group, approximately 80% of the individuals had a single supernumerary tooth, followed by those having two additional teeth. In both groups, there was no sexual dimorphism in third molar agenesis severity. The prevalence of third molar agenesis in the supernumerary group was similar to that of the control group (28/190 = 14.7% in both groups; p = 1.0). In total, 53 third molars were missing in the supernumerary group (n = 190) compared to 67 in the control group (n = 190; p = .862). The ratio of bilateral to unilateral third molar agenesis was significantly lower in the supernumerary group than in the control group (1.0 vs. 3.7, respectively; p = .026). CONCLUSION: The presence of supernumerary teeth did not significantly alter the likelihood of third molar agenesis or its severity. Bilateral third molar agenesis was considerably less prevalent in individuals with supernumerary teeth compared to controls. The present novel findings have important clinical and developmental implications.

Risk prediction model of impacted supernumerary tooth-associated root resorption in children based on cone-beam computed tomography analysis: a case control study.

BACKGROUND: External surface resorption is pressure-induced resorption and occurs on the external surface of the root, pressure exerted by impacted teeth, is common causes of external surface resorption. Predictive risk factors of impacted supernumerary tooth-associated root resorption (ISTARR) mentioned in this article include supernumerary teeth and patient factors. To investigate the risk factors of impacted supernumerary tooth-associated root resorption and predict the incidence of root resorption. METHODS: This restrospective study enrolled 324 patients with impacted supernumerary tooth. All Cone-Beam Computed Tomography (CBCT) data and patient information were divided into two groups (without tooth root resorption and with root resorption). CBCT images and patient information (age and gender) of 133 patients had adjacent tooth root resorption and 191 did not. seven variables were analysed using binary logistic regression. RESULTS: Individual analysis of potential risk factors showed that age, crown mesiodistal direction, root formation, and odontotheca of the impacted supernumerary tooth were associated significantly with ISTARR. Binary logistic regression showed that impacted supernumerary tooth with odontotheca (Odd Ratio = 2.926), the crown is in the middle (Odd Ratio = 1.446), located at the middle third of the adjacent tooth root (Odd Ratio = 1.614), complete root development (Odd Ratio = 1.334), and patient's age (Odd Ratio = 1.261) were significantly associated with ISTARR risk. CONCLUSIONS: The risk factors of root resorption can be detected and predicted early according to the features of supernumerary tooth and patient's age. Still, more prospective studies with larger sample size are needed to validate the result.

Effect of maxillary anterior supernumerary tooth extraction on the underlying malocclusion.

INTRODUCTION: Orthodontic discrepancies are a common finding in patients with supernumerary teeth (ST). The presence of a ST can cause a number of orthodontic discrepancies, including delayed eruption or retention of adjacent teeth, crowding, spacing, and abnormal root formation. The aim of the present study was to assess the effect of extraction of an anterior supernumerary tooth on the underlying orthodontic discrepancies without additional treatment for a 6-month period. METHODS: This was a prospective, longitudinal, observational, study. It included 40 participants with orthodontic malocclusions due to maxillary anterior supernumeraries. We examined the changes in the crowding and excessive space in the anterior and posterior segments on cast models. RESULTS: In the group that presented with crowding, a statistically significant decrease of 0.95 ± 0.17 mm (P < 0.001) was found between T0 and T1. Of the participants, three exhibited full self-correction. The excessive space at T0 (3.06 mm) decreased by 1.78 ± 0.19 mm to T1 (1.28 mm) in the anterior segment. Seven participants showed full self-correction of the diastemas after the 6-month observation period. CONCLUSION: The results imply that orthodontic treatment can be postponed for at least 6 months after the extraction of the supernumerary tooth as potential self-correction can be expected. This natural alleviation of the malocclusions may make the orthodontic treatment simpler, shorten the treatment time and decrease overall appliance wear time.

Globe-shaped central incisors in a patient with otodental syndrome.

Hearing impairments and dental anomalies are found in many genetic syndromes. Otodental syndrome is a rare combination of hearing loss and the presence of a pathognomonic dental phenotype known as globodontia, in which the tooth exhibits an abnormal globe shape. There is no histologic evidence of structural anomalies in the enamel, dentin, or pulp. This report describes the case of a 12-year-old boy who had hearing loss and 2 supernumerary globe-shaped teeth in the sites of the permanent maxillary central incisors. The diagnosis of otodental syndrome was established based on the clinical, radiographic, and histologic features, but other conditions, including dens evaginatus, talon cusp, dens invaginatus, and compound odontoma, should be included in the differential diagnosis. Dental treatment consisted of the extraction of both anomalous teeth, allowing spontaneous eruption of the impacted permanent central incisors. Early diagnosis of otodental syndrome permits a multidisciplinary approach to prevent other pathologic conditions, reduce functional damage, and avoid social problems.

Rare Genetic Variants in Human APC Are Implicated in Mesiodens and Isolated Supernumerary Teeth.

The activation of Wnt/ß-catenin signalling is a prerequisite for odontogenesis. APC, a member of the AXIN-CK1-GSK3ß-APC ß-catenin destruction complex, functions to modulate Wnt/ß-catenin signalling to establish regular teeth number and positions. APC loss-of-function mutations are associated with the over-activation of WNT/ß-catenin signalling and subsequent familial adenomatous polyposis (FAP; MIM 175100) with or without multiple supernumerary teeth. The ablation of Apc function in mice also results in the constitutive activation of ß-catenin in embryonic mouse epithelium and causes supernumerary tooth formation. The objective of this study was to investigate if genetic variants in the APC gene were associated with supernumerary tooth phenotypes. We clinically, radiographically, and molecularly investigated 120 Thai patients with mesiodentes or isolated supernumerary teeth. Whole exome and Sanger sequencing identified three extremely rare heterozygous variants (c.3374T>C, p.Val1125Ala; c.6127A>G, p.Ile2043Val; and c.8383G>A, p.Ala2795Thr) in APC in four patients with mesiodentes or a supernumerary premolar. An additional patient with mesiodens was compound as heterozygous for two APC variants (c.2740T>G, p.Cys914Gly, and c.5722A>T, p.Asn1908Tyr). Rare variants in APC in our patients are likely to contribute to isolated supernumerary dental phenotypes including isolated mesiodens and an isolated supernumerary tooth.

Interventions to facilitate the successful eruption of impacted maxillary incisor teeth due to the presence of a supernumerary: A systematic review and meta-analysis.

INTRODUCTION: A failure of maxillary incisor eruption is commonly attributed to the presence of a supernumerary tooth. This systematic review aimed to assess the percentage of impacted maxillary incisors that successfully erupt after surgical removal of supernumerary teeth with or without other interventions. METHODS: Systematic literature searches without restrictions were undertaken in 8 databases for studies reporting any intervention aimed at facilitating incisor eruption, including surgical removal of the supernumerary alone or in conjunction with additional interventions published up to September 2022. After duplicate study selection, data extraction, and risk of bias assessment according to the risk of bias in nonrandomized studies of interventions and Newcastle-Ottawa scale, random-effects meta-analyses of aggregate data were conducted. RESULTS: Fifteen studies (14 retrospective and 1 prospective) were included with 1058 participants (68.9% male; mean age, 9.1 years). The pooled eruption prevalence for removal of the supernumerary tooth with space creation or removal of the supernumerary tooth with orthodontic traction was significantly higher at 82.4% (95% confidence interval [CI], 65.5-93.2) and 96.9% (95% CI, 83.8-99.9) respectively, compared with removal of an associated supernumerary only (57.6%; 95% CI, 47.8-67.0). The odds of successful eruption of an impacted maxillary incisor after removal of a supernumerary were more favorable if the obstruction was removed in the deciduous dentition (odds ratio [OR], 0.42; 95% CI, 0.20-0.90; P = 0.02); if the supernumeraries were conical (OR, 2.91; 95% CI, 1.98-4.28; P <0.001); if the incisor was in the correct position (OR, 2.19; 95% CI, 1.14-4.20; P = 0.02), at the level of the gingival third (OR 0.07; 95% CI, <0.01-0.97; P = 0.04) and had incomplete root formation (OR, 9.02; 95% CI, 2.04-39.78; P = 0.004). Delaying removal of the supernumerary tooth 12 months after the expected eruption time of the maxillary incisor (OR, 0.33; 95% CI, 0.10-1.03; P = 0.05) and waiting >6 months for spontaneous eruption after removal of the obstacle (OR, 0.13; 95% CI, 0.03-0.50; P = 0.003) was associated with worse odds for eruption. CONCLUSIONS: Limited evidence indicated that the adjunctive use of orthodontic measures and removal of supernumerary teeth might be associated with greater odds of successfull impacted incisor eruption than removal of the supernumerary tooth alone. Certain characteristics related to supernumerary type and the position or developmental stage of the incisor may also influence successful eruption after removal of the supernumerary. However, these findings should be viewed with caution as our certainty is very low to low because of bias and heterogeneity. Further well-conducted and reported studies are required. The results of this systematic review have been used to inform and justify the iMAC Trial.

Unilateral vs Bilateral Maxillary Canine Impaction: A Cone-Beam Computed Tomography Study of Patterns and Associations.

AIM: This retrospective study aimed to compare and evaluate the pattern of maxillary canine impaction and its association with other anomalies using cone-beam computed tomography (CBCT). METHODS: A total of 59 CBCT records of patients (ages 12 and up) were divided into two groups: A total of 35 subjects with unilateral canine impactions and 24 subjects with bilateral canine impactions. The CBCT data were analyzed for the measurement of qualitative and quantitative variables. RESULTS: In unilateral canine impaction, the mesiodistal (MD) width of the central incisors and the nasal cavity (NC) width were wider (p < 0.05). The canine-palatal plane (U3-PP) distance was significantly longer in bilateral canine impaction (p < 0.05). The distance of the impacted canines from the palatal and mid-sagittal planes, the anterior dental arch width, and the maxillary skeletal width changed significantly with the position of the impacted canines (p < 0.05). Males had 0.185 odds of presenting with a bilateral canine impaction as compared to females (p = 0.025). The odds of having bilateral canine impaction with a longer canine-midsagittal plane (U3-MSP) distance was 1.30 (p = 0.003). CONCLUSION: The findings indicate a gender predilection with females showing a greater prevalence of bilateral canine impaction. Supernumerary teeth were associated with unilateral impacted canines and lower canine impaction with bilaterally impacted canines. CLINICAL SIGNIFICANCE: Anomalies in the form of the maxillary central and lateral incisors, distance from the maxillary canine to the palatal plane and the mid-sagittal plane, NC width, maxillary skeletal width, and gender, are the best discriminating parameters between unilateral and bilateral canine impactions.

Tooth abnormalities associated with non-syndromic cleft lip and palate: systematic review and meta-analysis.

OBJECTIVE: To evaluate the association between orofacial clefts (OFC) and tooth abnormalities (TA). METHODS: We searched PubMed, Scopus, Web of Science, Cochrane Library, LILACS, and BBO, and in the gray literature and selected observational studies that evaluated the association between TA and OFC. The risk of bias was analyzed using the Newcastle-Ottawa Scale. A random-effects meta-analysis was performed comparing the presence and absence of OFC, cleft type-cleft palate (CP) and cleft lip with or without palate (CL/P)-and cleft laterality-unilateral and bilateral. The certainty of evidence was evaluated using the GRADE approach. RESULTS: A total of 99 studies were included in the qualitative analysis, and 37 were included in the meta-analysis. Only four studies were classified as low risk of bias. Significant associations were observed between the presence of OFC and tooth agenesis (OR = 19.46; 95%CI = 4.99-75.96), supernumerary teeth (OR = 4.04; 95%CI = 1.26-12.99), developmental defects of enamel (OR = 3.15; 95%CI = 1.28-7.80), microdontia (OR = 15.57; 95%CI = 1.06-228.51), and taurodontism (OR = 1.74; 95%CI = 1.74-2.86). Individuals with CP had a lower frequency of supernumerary teeth (OR = 0.22; 95%CI = 0.08-0.64), peg-shaped tooth (OR = 0.31; 95%CI = 0.12-0.80), and morphological TA (OR = 0.13; 95%CI = 0.04-0.45) than individuals with CL/P. No TA was significantly associated with cleft laterality (p > 0.05). The quality of the evidence was very low in all analyses. CONCLUSION: Individuals with OFC had a higher frequency of TA than those without OFC. Individuals with CP had a lower frequency of TA than individuals with CL/P. No TA was associated to cleft laterality. CLINICAL RELEVANCE: Help to identify the treatment needs of individuals affected by OFC, improving the services provided to this population.

Dental anomalies and their therapeutic implications: retrospective assessment of a frequent finding in patients with cleft lip and palate.

BACKGROUND: Orofacial clefts are characterized by a frequent occurrence of dental anomalies. Numerous studies demonstrate the high prevalence of dental aplasia, supernumerary teeth, and hypoplastic teeth in patients with cleft lip with/without cleft palate (CL/P), yet the therapeutic consequences are rarely discussed. This study explores prevalence, localization, and association between primary and secondary dentition in a large European collective and begins to evaluate the significance of dental anomalies in the therapeutic course of patients with CL/P. METHODS: The medical reports of 1070 patients with different entities of CL/P who presented to our clinic within a 15-year investigation period were evaluated retrospectively. Dental anomalies were classified into three different diagnostic groups: dental aplasia, supernumerary teeth and hypoplastic teeth. The statistical analyses included studies of the frequency and localization of dental anomalies in different cleft entities as well as of the association between primary and secondary dentition and the therapeutic consequences. RESULTS: Uni- or bilateral cleft lip and palate (CLP) (47.5%) occurred most frequently, followed by cleft palate only (CPO) (32.9%) and cleft lip with or without alveolus (CL ± A) (19.6%). Dental anomalies were found significantly more often on the side of the cleft. Aplastic permanent teeth were mostly found in patients with CLP (54.8%), while supernumerary permanent teeth occurred primarily in patients with CL ± A (21.7%). Patients with CPO presented dental aplasia but no patient with CPO showed supernumerary teeth. The occurrence of dental aplasia in the primary dentition significantly increases the probability of aplastic teeth in the permanent dentition. Dental anomalies, in particular dental aplasia, significantly increase patients' need for subsequent orthodontic therapy and orthognathic surgery. CONCLUSION: Dental aplasia and hypoplasia are common in patients with CL/P not only in the cleft area but in the whole dentition. In the event of dental aplasia in the primary dentition, the frequency of aplastic teeth in the permanent dentition is significantly higher. Additionally, the need for therapeutic interventions, especially concerning orthognathic surgery, seems to be significantly higher in patients with CL/P who are affected by dental anomalies. Clinicians should take this into account when creating long-term treatment plans.

Dental manifestations of a paediatric patient with Goldenhar syndrome.

Goldenhar syndrome (GS) is a rare congenital disorder. It arises from the first pharyngeal pouch, first branchial cleft, first and second branchial arches, and primordia of the temporal bone. It mainly involves abnormalities in the ear, mandibular, and maxillary arches, and is associated with variable clinical features such as skeletal, cardiac, and renal systems. The presence of extra teeth in the dental arch is called supernumerary teeth, and hypodontia refers to congenitally missing teeth. The occurrence of both these anomalies in the same patient is called concomitant hypohyperdontia. However, the GS itself is not very rare, though the presence of concomitant hypohyperdontia has not been reported. The purpose of the present case report is to describe the first case from Saudi Arabia with a characteristic combination of rare findings in a seven-year-old child with comprehensive oral rehabilitation.

Use of 3D printing in the planning of a patient with unerupted maxillary central incisors.

Impacted central incisors are a clinical dilemma faced by orthodontists, oral and maxillofacial surgeons, paediatric and restorative dentists. Successful management requires a robust diagnosis and treatment planning process. This case report highlights the use of 3D printing to aid the treatment planning of a patient with bilateral unerupted maxillary central incisors due to two supernumerary teeth acting as a physical obstruction. The preoperative cone beam computed tomography scan allowed for production of the printed model to the exact size and dimensions of the unerupted teeth and supernumeraries to facilitate the planning of the case and to aid in consenting the patient for treatment.

Non-syndromic cleft lip with or without palate-susceptible SNPs is associated with hyperdontia.

BACKGROUND: Non-syndromic supernumerary teeth (NSST) or hyperdontia may share common genetic determinants with non-syndromic cleft lip with or without palate (NSCL/P). The aim of this study was to test the associations between five genome-wide-associated NSCL/P-susceptible single nucleotide polymorphisms (SNPs) (rs2235371, rs7078160, rs8049367, rs4791774, and rs13041247) and the occurrence of NSST. MATERIALS AND METHODS: A total of 163 cases and 326 controls were recruited and their genomic DNA was extracted from blood samples. Five NSCL/P-susceptible SNPs (rs2235371, rs7078160, rs8049367, rs4791774, and rs13041247) were genotyped by TaqMan method. Odds ratio (OR) and 95% confidence interval (CI) were used to estimate the associations between the SNPs and the risk of NSST by PLINK software. RESULTS: Rs4791774 (A > G) and rs13041247 (T > C) were associated with risk of NSST (rs4791774: Padd  = 0.011, OR, 95% CI = 0.62, 0.43-0.90; rs13041247: Phomo  = 0.031, OR, 95% CI = 1.79, 1.05-3.05) and one supernumerary tooth (rs4791774: Pdom  = 0.009, OR, 95% CI = 0.56, 0.36-0.87; rs13041247: Phomo  = 0.034, OR, 95% CI = 1.82, 1.05-3.15). Rs4791774 (A > G) was also showed association with risk of upper arch supernumerary teeth only (Padd  = 0.010, OR, 95% CI = 0.60, 0.41-0.89). CONCLUSION: Non-syndromic cleft lip with or without palate-susceptible loci rs4791774 (A > G) and rs13041247 (T > C) were associated with the risk of supernumerary teeth.

Effects of mesiodens on adjacent permanent teeth: a retrospective study in Korean children based on cone-beam computed tomography.

BACKGROUND: Mesiodens can be associated with several complications. The optimal age for treatment, however, remains controversial. AIM: To investigate the three-dimensional (3D) positions of mesiodens using cone-beam computed tomography (CBCT) and determine the association of eruption-related complications of mesiodens with these 3D positions and delayed development of the central incisors. DESIGN: In total, 293 Korean children (383 supernumerary teeth) aged 4-10 years with no history of orthodontic treatment were included. CBCT and panoramic radiography data for all patients were retrospectively investigated with regard to the 3D positions of mesiodens, apical maturity of the permanent first molars, delayed development of the central incisors relative to the apical maturity of the permanent first molars (Nolla's stage), and eruption-related complications of mesiodens. RESULTS: Eruption-related complications were not correlated with any 3D characteristic other than the 'within the arch' position of mesiodens, while they showed a significant correlation with delayed development of the central incisors (P < 0.05). CONCLUSIONS: Mesiodens caused eruption-related complications in 33.7% patients. Moreover, the risk of these complications was higher when mesiodens caused delayed development of the central incisors. These findings can aid clinicians in planning appropriate and timely treatment for mesiodens, with focus on minimising patient discomfort.

A patient with mandibular deviation and 3 mandibular incisors treated with asymmetrically bent improved superelastic nickel-titanium alloy wires.

Skeletal and dental discrepancies cause asymmetric malocclusions in orthodontic patients. It is difficult to achieve adequate functional occlusion and guidance in patients with congenital absence of a mandibular incisor due to the tooth-size discrepancy. Here, we describe the orthodontic treatment of a 22-year-old woman with an asymmetric Angle Class II malocclusion, mandibular deviation to the left, and 3 mandibular incisors. The anterior teeth and maxillary canines were crowded. We used an improved superelastic nickel-titanium alloy wire (Tomy International, Tokyo, Japan) to compensate for the asymmetric mandibular arch and an asymmetrically bent archwire to move the maxillary molars distally. A skeletal anchorage system provided traction for intermaxillary elastics, and extractions were not needed. We alleviated the crowding and created an ideal occlusion with proper overjet, overbite, and anterior guidance with Class I canine and molar relationships. This method of treatment with an asymmetrically bent nickel-titanium alloy wire provided proper Class I occlusion and anterior guidance despite the mandibular deviation to the left and 3 mandibular incisors, without the need for extractions.

Multidisciplinary management of an impacted maxillary central incisor associated with supernumerary teeth: a case report.

Permanent maxillary central incisor impaction is a rare condition of multifactorial etiology that should be treated on diagnosis. This article describes multidisciplinary treatment of an 11-year-old patient presenting with a permanent maxillary right central incisor that was impacted due to the presence of 2 supernumerary teeth. The diagnosis was reached through clinical evaluation, radiography, and cone beam computed tomography. Treatment involved the surgical removal of the supernumerary teeth followed by traction of the impacted tooth through a combination of removable and fixed orthodontic appliances. Orthodontic treatment was completed after 18 months, resulting in adequate positioning of the right central incisor in the arch. Periodic follow-up visits were scheduled for prophylaxis and oral hygiene reinforcement. After 2 years, the teeth were adequately aligned, the gingiva was healthy, and the patient was esthetically satisfied. The multidisciplinary approach allowed functional and esthetic oral rehabilitation, thus helping the patient to avoid the psychological impact of a missing anterior tooth.

Delayed Eruption of Maxillary Central Incisors Associated with the Presence of Supernumerary Teeth: A Case Report with 18 Months Follow-up.

AIM: The aim of this study is to discuss a case of an 11-year-old pediatric patient, who was diagnosed with delayed eruption of the permanent maxillary central incisors because of palatally impacted supernumerary teeth. BACKGROUND: The delayed eruption of permanent teeth can be a result of blocking by supernumerary teeth and over-retained primary teeth. Early diagnosis can help in avoiding the complications. The management of such cases depends on the stage of teeth development, teeth position, and space availability. Treatment may combine both surgical and orthodontic interventions. CASE DESCRIPTION: The case was managed by surgically removing the primary retained teeth and supernumerary teeth in two visits then allowing the impacted permanent incisors to erupt without any intervention. CONCLUSION: After 18 months follow-up, the two permanent incisors erupted spontaneously with no orthodontic intervention. CLINICAL SIGNIFICANCE: dentists should be aware of the importance of early diagnosis of supernumerary teeth. The management of such cases should be designed by a multidisciplinary team decision.

An Uncommon Occurrence of Three-Fourth Molars Concomitant to Hypodontia in a Nonsyndromic Patient.

Bilaterally mandibular and maxillary fourth molars, concomitant to hypodontia, are uncommon. These dental anomalies, called hypohyperdontia, are rare and etiology is not well defined. Several complications may occur as a consequence of supernumerary teeth, such as teeth impaction, resorption of adjacent teeth, and development of cysts and tumors. The authors present an uncommon occurrence of three-fourth molars concomitant to hypodontia and dentigerous cyst associated with impacted mandibular second and third molars in a nonsyndromic patient. The authors attempt to discuss the occurrence of bilaterally fourth molars and reinforce the importance of clinical approach, considering risks and benefits for the patient.

Management of Unusual Rotation of Maxillary Central Incisor with Impacted Mesiodens: Case Report.

Supernumerary teeth are frequently found in the maxillary anterior region, largely in permanent dentition (rare in deciduous dentition). Shape of the supernumerary teeth may vary from conical, tueberculate, supplemental to odontome. Mesiodens is a conical type of supernumerary teeth located in the maxillary central incisor region and is generally unerupted. Presence of mesiodens may result in rotation, uneruption, or malalignment of adjacent maxillary incisors. In this article, we present a case report of unusual rotation of maxillary central incisor with impacted mesiodens.

Multidisciplinary Treatment of Impacted Maxillary Central Incisors: Literature Review and Case Report.

Tooth impaction is an eruption disorder frequently observed in orthodontic clinical practice. A 9-year-old female patient presented with impacted permanent maxillary central incisors and two supernumerary teeth in the region. The early diagnosis and multidisciplinary treatment approach adopted in our case allowed to successfully restore esthetic appearance and occlusion.

Closure of large midline diastema by a "HIV-Spring".

Midline diastema is a common orthodontic problem in mixed dentition caused by various factors like genetic, supernumery teeth, abnormal frenum attachment, habits and microdontia etc. Large diastemas need closure for the eruption of adjacent teeth. I present here a newly designed customized self active HIV-Spring (Hari Inverted 'V' Spring) for closing a large diastema with minimum orthodontic materials and less activation visits. The spring can be modfied for the three dimensional movement of central incisors.